| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload,
on IPv4 and IPv6 transport, that check that PMTU exceptions are created
with the right value when exceeding the MTU on a link of the path.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.
v2:
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
link option they will be skipped (David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a router between endpoints, implemented via namespaces, set a low MTU
between router and destination endpoint, exceed it and check PMTU value in
route exceptions.
v2:
- Change all occurrences of VxLAN to VXLAN (Jiri Benc)
- Introduce IPv4 tests right away, if iproute2 doesn't support the 'df'
link option they will be skipped (David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extends the existing udp programs to allow checking for proper
GRO aggregation/GSO size, and run the tests via a shell script, using
a veth pair with XDP program attached to trigger the GRO code path.
rfc v3 -> v1:
- use ip route to attach the xdp helper to the veth
rfc v2 -> rfc v3:
- add missing test program options documentation
- fix sporatic test failures (receiver faster than sender)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Run on top of veth pair, using a dummy XDP program to enable the GRO.
rfc v3 -> v1:
- use ip route to attach the xdp helper to the veth
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This trivial XDP program does nothing, but will be used by the
next patch to test the GRO path in a net namespace, leveraging
the veth XDP implementation.
It's added here, despite its 'net' usage, to avoid the duplication
of the llc-related makefile boilerplate.
rfc v3 -> v1:
- move the helper implementation into the bpf directory, don't
touch udpgso_bench_rx
rfc v2 -> rfc v3:
- move 'x' option handling here
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
And fix a couple of buglets (port option processing,
clean termination on SIGINT). This is preparatory work
for GRO tests.
rfc v2 -> rfc v3:
- use ETH_MAX_MTU
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent improvements and fixes from Arnaldo Carvalho de Melo:
Intel PT SQL viewer: (Adrian Hunter)
- Fall back to /usr/local/lib/libxed.so
- Add Selected branches report
- Add help window
- Fix table find when table re-ordered
Intel PT debug log (Adrian Hunter)
- Add more event information
- Add MTC and CYC timestamps
perf record: (Andi Kleen)
- Support weak groups, just like with 'perf stat'
perf trace: (Arnaldo Carvalho de Melo)
- Start augmenting raw_syscalls:{sys_enter,sys_exit}: goal is to have a
generic, arch independent eBPF kernel component that is programmed with
syscall table details, what to copy, how many bytes, pid, arg filters from the
userspace via eBPF maps by the 'perf trace' tool that continues to use all its
argument beautifiers, just taking advantage of the extra pointer contents.
JVMTI: (Gustavo Romero)
- Fix undefined symbol scnprintf in libperf-jvmti.so
perf top: (Jin Yao)
- Display the LBR stats in callchain entries
perf stat: (Thomas Richter)
- Handle different PMU names with common prefix
arm64: Will (Deacon)
- Fix arm64 tools build failure wrt smp_load_{acquire,release}.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Andi reported following malfunction:
# perf record -e '{ref-cycles,cycles}:S' -a sleep 1
# perf script
non matching sample_id_all
That's because we disable sample_id_all bit for non-sampling group
members. We can't do that, because it needs to be the same over the
whole event list. This patch keeps it untouched again.
Reported-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180923150420.27327-1-jolsa@kernel.org
Fixes: e9add8bac6c6 ("perf evsel: Disable write_backward for leader sampling group events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently jvmti agent can not be used because function scnprintf is not
present in the agent libperf-jvmti.so. As a result the JVM when using
such agent to record JITed code profiling information will fail on
looking up scnprintf:
java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf
This commit fixes that by reverting to the use of snprintf, that can be
looked up, instead of scnprintf, adding a proper check for the returned
value in order to print a better error message when the jitdump file
pathname is too long. Checking the returned value also helps to comply
with some recent gcc versions, like gcc8, which will fail due to
truncated writing checks related to the -Werror=format-truncation= flag.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 1541117601-18937-2-git-send-email-gromero@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-mvpxxxy7wnzaj74cq75muw3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Guenter reported that using ARCH=x86_64 to build perf has regressed:
$ make -C tools/perf O=/tmp/build/perf ARCH=x86_64
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
make[2]: *** No rule to make target '/home/acme/git/perf/tools/arch/x86_64/include/uapi/asm//mman.h', needed by '/tmp/build/perf/trace/beauty/generated/mmap_flags_array.c'. Stop.
make[2]: *** Waiting for unfinished jobs....
PERF_VERSION = 4.19.gf6c23e3
make[1]: *** [Makefile.perf:207: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
This is because we must use $(SRCARCH) where we were using $(ARCH), so
that, just like the top level Makefile, we get this done:
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
SRCARCH := x86
endif
Which is done in tools/scripts/Makefile.arch, so switch to use
$(SRCARCH).
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: fbd7458db757 ("perf beauty: Wire up the mmap flags table generator to the Makefile")
Link: https://lkml.kernel.org/r/20181105184612.GD7077@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One cause of decoding errors is un-synchronized side-band data.
Timestamps are needed to debug such cases. TSC packet timestamps are
logged. Log also MTC and CYC timestamps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20181105073505.8129-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
More event information is useful for debugging, especially MMAP events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20181105073505.8129-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
re-ordered
Table rows can be re-ordered by selecting a column to sort by. After
re-ordering, the "find" operation was highlighting the wrong row, fix
it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a window to display help. It is also possible to display the help
only, by using the option "--help-only" instead of a database name.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fetching data from the database can be slow. Add a report that provides
the ability to select a subset of branches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
/usr/local/lib/libxed.so
Fall back to /usr/local/lib/libxed.so to cater for distributions that do
not have /usr/local/lib in the library path by default.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf report' has supported the displaying of LBR stats (such as cycles,
predicted%) in callchain entry.
For example:
$ perf report --branch-history --stdio
--1.01%--intel_idle mwait.h:29
intel_idle cpufeature.h:164 (cycles:5)
intel_idle cpufeature.h:164 (predicted:76.4%)
intel_idle mwait.h:102 (cycles:41)
intel_idle current.h:15
While 'perf top' doesn't support that.
For example:
$ perf top -a -b --call-graph branch
- 13.86% 0.23% [kernel] [k] __x86_indirect_thunk_rax
- 13.65% __x86_indirect_thunk_rax
+ 1.69% do_syscall_64
+ 1.68% do_select
+ 1.41% ktime_get
+ 0.70% __schedule
+ 0.62% do_sys_poll
0.58% __x86_indirect_thunk_rax
Actually it's very easy to enable this feature in 'perf top'.
With this patch, the result is:
$ perf top -a -b --call-graph branch
$ - 13.58% 0.00% [kernel] [k] __x86_indirect_thunk_rax
$ - 13.57% __x86_indirect_thunk_rax (predicted:93.9%)
$ + 1.78% do_select (cycles:2)
$ + 1.68% perf_pmu_disable.part.99 (cycles:1)
$ + 1.45% ___sys_recvmsg (cycles:25)
$ + 0.81% unix_stream_sendmsg (cycles:18)
$ + 0.80% ktime_get (cycles:400)
$ 0.58% pick_next_task_fair (cycles:47)
$ + 0.56% i915_request_retire (cycles:2)
$ + 0.52% do_sys_poll (cycles:4)
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1540983995-20462-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On s390 the CPU Measurement Facility for counters now supports
2 PMUs named cpum_cf (CPU Measurement Facility for counters) and
cpum_cf_diag (CPU Measurement Facility for diagnostic counters)
for one and the same CPU.
Running command
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
2 tx_c_tend
0.002120091 seconds time elapsed
0.000121000 seconds user
0.002127000 seconds sys
[root@s35lp76 perf]#
displays output which is unexpected (and wrong):
2 tx_c_tend
The test program definitely triggers only one transaction, as shown
in line 'TX_C_TEND: 1 expected:1'.
This is caused by the following call sequence:
pmu_lookup() scans and installs a PMU.
+--> pmu_aliases() parses all aliases in directory
.../<pmu-name>/events/* which are file names.
+--> pmu_aliases_parse() Read each file in directory and create
an new alias entry. This is done with
+--> perf_pmu__new_alias() and
+--> __perf_pmu__new_alias() which also check for
identical alias names.
After pmu_aliases() returns, a complete list of event names
for this pmu has been created. Now function
pmu_add_cpu_aliases() is called to add the events listed in the json
| files to the alias list of the cpu.
+--> perf_pmu__find_map() Returns a pointer to the json events.
Now function pmu_add_cpu_aliases() scans through all events listed
in the JSON files for this CPU.
Each json event pmu name is compared with the current PMU being
built up and if they mismatch, the json event is added to the
current PMUs alias list.
To avoid duplicate entries the following comparison is done:
if (!is_arm_pmu_core(name)) {
pname = pe->pmu ? pe->pmu : "cpu";
if (strncmp(pname, name, strlen(pname)))
continue;
}
The culprit is the strncmp() function.
Using current s390 PMU naming, the first PMU is 'cpum_cf'
and a long list of events is added, among them 'tx_c_tend'
When the second PMU named 'cpum_cf_diag' is added, only one event
named 'CF_DIAG' is added by the pmu_aliases() function.
Now function pmu_add_cpu_aliases() is invoked for PMU 'cpum_cf_diag'.
Since the CPUID string is the same for both PMUs, json file events
for PMU named 'cpum_cf' are added to the PMU 'cpm_cf_diag'
This happens because the strncmp() actually compares:
strncmp("cpum_cf", "cpum_cf_diag", 6);
The first parameter is the pmu name taken from the event in
the json file. The second parameter is the pmu name of the PMU
currently being built.
They are different, but the length of the compare only tests the
common prefix and this returns 0(true) when it should return false.
Now all events for PMU cpum_cf are added to the alias list for pmu
cpum_cf_diag.
Later on in function parse_events_add_pmu() the event 'tx_c_end' is
searched in all available PMUs and found twice, adding it two
times to the evsel_list global variable which is the root
of all events. This results in a counter value of 2 instead
of 1.
Output with this patch:
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
1 tx_c_tend
0.001815365 seconds time elapsed
0.000123000 seconds user
0.001756000 seconds sys
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Sebastien Boisvert <sboisvert@gydle.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/20181023151616.78193-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement a weak group fallback for 'perf record', similar to the
existing 'perf stat' support. This allows to use groups that might be
longer than the available counters without failing.
Before:
$ perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}' -a sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles).
/bin/dmesg | grep -i perf may provide additional information.
After:
$ ./perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}:W' -a sleep 1
WARNING: No sample_id_all support, falling back to unordered processing
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 8.136 MB perf.data (134069 samples) ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181001195927.14211-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
- Move the function from builtin-stat to evlist for reuse
- Rename to evlist to match purpose better
- Pass the evlist as first argument.
- No functional changes
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181001195927.14211-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is the start of having the raw_syscalls:sys_enter BPF handler
collecting pointer arguments, namely pathnames, and with two syscalls
that have that pointer in different arguments, "open" as it as its first
argument, "openat" as the second.
With this in place the existing beautifiers in 'perf trace' works, those
args are shown instead of just the pointer that comes with the syscalls
tracepoints.
This also serves to show and document pitfalls in the process of using
just that place in the kernel (raw_syscalls:sys_enter) plus tables
provided by userspace to collect syscall pointer arguments.
One is the need to use a barrier, as suggested by Edward, to avoid clang
optimizations that make the kernel BPF verifier to refuse loading our
pointer contents collector.
The end result should be a generic eBPF program that works in all
architectures, with the differences amongst archs resolved by the
userspace component, 'perf trace', that should get all its tables
created automatically from the kernel components where they are defined,
via string table constructors for things not expressed in BTF/DWARF
(enums, structs, etc), and otherwise using those observability files
(BTF).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A number of fixes and some late updates:
- make in_compat_syscall() behavior on x86-32 similar to other
platforms, this touches a number of generic files but is not
intended to impact non-x86 platforms.
- objtool fixes
- PAT preemption fix
- paravirt fixes/cleanups
- cpufeatures updates for new instructions
- earlyprintk quirk
- make microcode version in sysfs world-readable (it is already
world-readable in procfs)
- minor cleanups and fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Cleanup in_compat_syscall() callers
x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
objtool: Support GCC 9 cold subfunction naming scheme
x86/numa_emulation: Fix uniform-split numa emulation
x86/paravirt: Remove unused _paravirt_ident_32
x86/mm/pat: Disable preemption around __flush_tlb_all()
x86/paravirt: Remove GPL from pv_ops export
x86/traps: Use format string with panic() call
x86: Clean up 'sizeof x' => 'sizeof(x)'
x86/cpufeatures: Enumerate MOVDIR64B instruction
x86/cpufeatures: Enumerate MOVDIRI instruction
x86/earlyprintk: Add a force option for pciserial device
objtool: Support per-function rodata sections
x86/microcode: Make revision and processor flags world-readable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates and fixes from Ingo Molnar:
"These are almost all tooling updates: 'perf top', 'perf trace' and
'perf script' fixes and updates, an UAPI header sync with the merge
window versions, license marker updates, much improved Sparc support
from David Miller, and a number of fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
perf intel-pt/bts: Calculate cpumode for synthesized samples
perf intel-pt: Insert callchain context into synthesized callchains
perf tools: Don't clone maps from parent when synthesizing forks
perf top: Start display thread earlier
tools headers uapi: Update linux/if_link.h header copy
tools headers uapi: Update linux/netlink.h header copy
tools headers: Sync the various kvm.h header copies
tools include uapi: Update linux/mmap.h copy
perf trace beauty: Use the mmap flags table generated from headers
perf beauty: Wire up the mmap flags table generator to the Makefile
perf beauty: Add a generator for MAP_ mmap's flag constants
tools include uapi: Update asound.h copy
tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies
tools include uapi: Update linux/fs.h copy
perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
perf cs-etm: Correct CPU mode for samples
perf unwind: Take pgoff into account when reporting elf to libdwfl
perf top: Do not use overwrite mode by default
perf top: Allow disabling the overwrite mode
perf trace: Beautify mount's first pathname arg
...
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For now with BPF raw_augmented we hook into raw_syscalls:sys_enter and
there we get all 6 syscall args plus the tracepoint common fields
(sizeof(long)) and the syscall_nr (another long). So we check if that is
the case and if so don't look after the sc->args_size, but always after
the full raw_syscalls:sys_enter payload, which is fixed.
We'll revisit this later to pass s->args_size to the BPF augmenter (now
tools/perf/examples/bpf/augmented_raw_syscalls.c, so that it copies only
what we need for each syscall, like what happens when we use
syscalls:sys_enter_NAME, so that we reduce the kernel/userspace traffic
to just what is needed for each syscall.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nlslrg8apxdsobt4pwl3n7ur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some things that I missed due to travel, or that came in late.
Two fixes also going to stable:
- A revert of a buggy change to the 8xx TLB miss handlers.
- Our flushing of SPE (Signal Processing Engine) registers on fork
was broken.
Other changes:
- A change to the KVM decrementer emulation to use proper APIs.
- Some cleanups to the way we do code patching in the 8xx code.
- Expose the maximum possible memory for the system in
/proc/powerpc/lparcfg.
- Merge some updates from Scott: "a couple device tree updates, and a
fix for a missing prototype warning"
A few other minor fixes and a handful of fixes for our selftests.
Thanks to: Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe
Leroy, Felipe Rechia, Joel Stanley, Naveen N. Rao, Paul Mackerras,
Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
selftests/powerpc: Fix compilation issue due to asm label
selftests/powerpc/cache_shape: Fix out-of-tree build
selftests/powerpc/switch_endian: Fix out-of-tree build
selftests/powerpc/pmu: Link ebb tests with -no-pie
selftests/powerpc/signal: Fix out-of-tree build
selftests/powerpc/ptrace: Fix out-of-tree build
powerpc/xmon: Relax frame size for clang
selftests: powerpc: Fix warning for security subdir
selftests/powerpc: Relax L1d miss targets for rfi_flush test
powerpc/process: Fix flush_all_to_thread for SPE
powerpc/pseries: add missing cpumask.h include file
selftests/powerpc: Fix ptrace tm failure
KVM: PPC: Use exported tb_to_ns() function in decrementer emulation
powerpc/pseries: Export maximum memory value
powerpc/8xx: Use patch_site for perf counters setup
powerpc/8xx: Use patch_site for memory setup patching
powerpc/code-patching: Add a helper to get the address of a patch_site
Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
powerpc/8xx: add missing header in 8xx_mmu.c
powerpc/8xx: Add DT node for using the SEC engine of the MPC885
...
|
|
With just this commit we get to support all syscalls via hooking
raw_syscalls:sys_{enter,exit} to the trace__sys_{enter,exit} routines
to combine, strace-like, those tracepoints.
# trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
? ( ): sleep/31680 ... [continued]: execve()) = 0
0.043 ( 0.004 ms): sleep/31680 brk() = 0x55652a851000
0.070 ( 0.009 ms): sleep/31680 access(filename:, mode: R) = -1 ENOENT No such file or directory
0.087 ( 0.006 ms): sleep/31680 openat(dfd: CWD, filename: , flags: CLOEXEC) = 3
0.096 ( 0.003 ms): sleep/31680 fstat(fd: 3, statbuf: 0x7ffc5269e190) = 0
0.101 ( 0.005 ms): sleep/31680 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) = 0x7f709c239000
0.109 ( 0.002 ms): sleep/31680 close(fd: 3) = 0
0.126 ( 0.006 ms): sleep/31680 openat(dfd: CWD, filename: , flags: CLOEXEC) = 3
0.135 ( 0.003 ms): sleep/31680 read(fd: 3, buf: 0x7ffc5269e358, count: 832) = 832
0.141 ( 0.002 ms): sleep/31680 fstat(fd: 3, statbuf: 0x7ffc5269e1f0) = 0
0.146 ( 0.005 ms): sleep/31680 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7f709c237000
0.159 ( 0.007 ms): sleep/31680 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7f709bc79000
0.168 ( 0.009 ms): sleep/31680 mprotect(start: 0x7f709be26000, len: 2093056) = 0
0.179 ( 0.010 ms): sleep/31680 mmap(addr: 0x7f709c025000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) = 0x7f709c025000
0.196 ( 0.005 ms): sleep/31680 mmap(addr: 0x7f709c02b000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7f709c02b000
0.210 ( 0.002 ms): sleep/31680 close(fd: 3) = 0
0.230 ( 0.002 ms): sleep/31680 arch_prctl(option: 4098, arg2: 140121632638208) = 0
0.306 ( 0.009 ms): sleep/31680 mprotect(start: 0x7f709c025000, len: 16384, prot: READ) = 0
0.338 ( 0.005 ms): sleep/31680 mprotect(start: 0x556529607000, len: 4096, prot: READ) = 0
0.348 ( 0.005 ms): sleep/31680 mprotect(start: 0x7f709c253000, len: 4096, prot: READ) = 0
0.356 ( 0.019 ms): sleep/31680 munmap(addr: 0x7f709c239000, len: 103334) = 0
0.463 ( 0.002 ms): sleep/31680 brk() = 0x55652a851000
0.468 ( 0.004 ms): sleep/31680 brk(brk: 0x55652a872000) = 0x55652a872000
0.474 ( 0.002 ms): sleep/31680 brk() = 0x55652a872000
0.484 ( 0.008 ms): sleep/31680 open(filename: , flags: CLOEXEC) = 3
0.497 ( 0.002 ms): sleep/31680 fstat(fd: 3, statbuf: 0x7f709c02aaa0) = 0
0.501 ( 0.006 ms): sleep/31680 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7f70950aa000
0.514 ( 0.002 ms): sleep/31680 close(fd: 3) = 0
0.554 (1000.140 ms): sleep/31680 nanosleep(rqtp: 0x7ffc5269eed0) = 0
1000.734 ( 0.007 ms): sleep/31680 close(fd: 1) = 0
1000.748 ( 0.004 ms): sleep/31680 close(fd: 2) = 0
1000.769 ( ): sleep/31680 exit_group()
#
Now to allow selecting which syscalls should be traced, using a map.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-votqqmqhag8e1i9mgyzfez3o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking fixes from David Miller:
1) BPF verifier fixes from Daniel Borkmann.
2) HNS driver fixes from Huazhong Tan.
3) FDB only works for ethernet devices, reject attempts to install FDB
rules for others. From Ido Schimmel.
4) Fix spectre V1 in vhost, from Jason Wang.
5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2
driver, from Marc Zyngier.
6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
openvswitch: Fix push/pop ethernet validation
net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
bpf: test make sure to run unpriv test cases in test_verifier
bpf: add various test cases to test_verifier
bpf: don't set id on after map lookup with ptr_to_map_val return
bpf: fix partial copy of map_ptr when dst is scalar
libbpf: Fix compile error in libbpf_attach_type_by_name
kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
selftests: mlxsw: qos_mc_aware: Tweak for min shaper
mlxsw: spectrum: Set minimum shaper on MC TCs
mlxsw: reg: QEEC: Add minimum shaper fields
net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
net: hns3: bugfix for handling mailbox while the command queue reinitialized
net: hns3: fix incorrect return value/type of some functions
net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
net: hns3: bugfix for is_valid_csq_clean_head()
net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
net: hns3: bugfix for the initialization of command queue's spin lock
...
|
|
smp_load_{acquire,release}
Cheers for reporting this. I managed to reproduce the build failure with
gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1).
The code in question is the arm64 versions of smp_load_acquire() and
smp_store_release(). Unlike other architectures, these are not built
around READ_ONCE() and WRITE_ONCE() since we have instructions we can
use instead of fences. Bringing our macros up-to-date with those (i.e.
tweaking the union initialisation and using the special "uXX_alias_t"
types) appears to fix the issue for me.
Committer notes:
Testing it in the systems previously failing:
# time dm android-ndk:r12b-arm \
android-ndk:r15c-arm \
debian:experimental-x-arm64 \
ubuntu:14.04.4-x-linaro-arm64 \
ubuntu:16.04-x-arm \
ubuntu:16.04-x-arm64 \
ubuntu:18.04-x-arm \
ubuntu:18.04-x-arm64
1 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
2 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
3 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 8.2.0-7) 8.2.0
4 ubuntu:14.04.4-x-linaro-arm64 : Ok aarch64-linux-gnu-gcc (Linaro GCC 5.5-2017.10) 5.5.0
5 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
6 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
7 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04) 7.3.0
8 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04) 7.3.0
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181031174408.GA27871@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Starting with GCC 8, a lot of unlikely code was moved out of line to
"cold" subfunctions in .text.unlikely.
For example, the unlikely bits of:
irq_do_set_affinity()
are moved out to the following subfunction:
irq_do_set_affinity.cold.49()
Starting with GCC 9, the numbered suffix has been removed. So in the
above example, the cold subfunction is instead:
irq_do_set_affinity.cold()
Tweak the objtool subfunction detection logic so that it detects both
GCC 8 and GCC 9 naming schemes.
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/015e9544b1f188d36a7f02fa31e9e95629aa5f50.1541040800.git.jpoimboe@redhat.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-01
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix tcp_bpf_recvmsg() to return -EAGAIN instead of 0 in non-blocking
case when no data is available yet, from John.
2) Fix a compilation error in libbpf_attach_type_by_name() when compiled
with clang 3.8, from Andrey.
3) Fix a partial copy of map pointer on scalar alu and remove id
generation for RET_PTR_TO_MAP_VALUE return types, from Daniel.
4) Add unlimited memlock limit for kernel selftest's flow_dissector_load
program, from Yonghong.
5) Fix ping for some BPF shell based kselftests where distro does not
ship "ping -6" anymore, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add some more map related test cases to test_verifier kselftest
to improve test coverage. Summary: 1012 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We are using 'dscr_insn' as a label in inline asm to identify if a
SIGILL was generated by the mtspr instruction at that point. However,
with inline assembly, the compiler is still free to duplicate the asm
statement for optimization purposes, which results in the label being
defined twice with the error:
/tmp/ccerQCql.s:874: Error: symbol `dscr_insn' is already defined
With different compiler versions, we may also see:
/tmp/ccJzLDlN.o:(.toc+0x0): undefined reference to `dscr_insn'
Remove the use of the label in the inline assembly. Instead, just look
for the offending instruction in the signal handler.
Fixes: d2bf793237b3 ("selftests/powerpc: Add test to verify rfi flush across a system call")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Arnaldo Carvalho de Melo reported build error in libbpf when clang
version 3.8.1-24 (tags/RELEASE_381/final) is used:
libbpf.c:2201:36: error: comparison of constant -22 with expression of
type 'const enum bpf_attach_type' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if (section_names[i].attach_type == -EINVAL)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~
1 error generated.
Fix the error by keeping "is_attachable" property of a program in a
separate struct field instead of trying to use attach_type itself.
Fixes: 956b620fcf0b ("libbpf: Introduce libbpf_attach_type_by_name")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
ping binary on some distros doesn't support "ping -6" anymore.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In a previous patch, mlxsw was updated to configure a minimum bandwidth
allowance on MC TCs. Test that this indeed fixes the problem of UC
traffic overload pushing out all MC traffic.
Fixes: b5638d46c90a ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the minimum shaper is now being enabled for MC TCs, it's
unreasonable to expect no UC traffic loss. Minimal min shaper value is
200Mbps, which is 20% of the 1Gbps that this test configures on egress.
To cover for glitches, tolerate up to 25% UC degradation under MC
overload.
Fixes: b5638d46c90a ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the absence of a fallback, samples must provide a correct cpumode for
the 'ip'. Do that now there is no fallback.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181031091043.23465-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the absence of a fallback, callchains must encode also the callchain
context. Do that now there is no fallback.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/100ea2ec-ed14-b56d-d810-e0a6d2f4b069@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When synthesizing FORK events, we are trying to create thread objects
for the already running tasks on the machine.
Normally, for a kernel FORK event, we want to clone the parent's maps
because that is what the kernel just did.
But when synthesizing, this should not be done. If we do, we end up
with overlapping maps as we process the sythesized MMAP2 events that
get delivered shortly thereafter.
Use the FORK event misc flags in an internal way to signal this
situation, so we can elide the map clone when appropriate.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/20181030.222404.2085088822877051075.davem@davemloft.net
[ Added comment about flag use in machine__process_fork_event(),
use ternary op in thread__clone_map_groups() as suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If events are coming in at a rate such that the event processing thread
can barely keep up, our initial run of the event ring will almost never
terminate and this delays the starting of the display thread.
The screen basically stays black until the event thread can get out of
it's endless loop.
Therefore, start the display thread before we start processing the ring
buffer.
This also make sure that we always have the user requested real time
setting engaged when processing the ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181030.223003.2242527041807905962.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
9163a0fc1f0c ("net: bridge: add support for per-port vlan stats")
And silence this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Leblond <eric@regit.org>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Link: https://lkml.kernel.org/n/tip-7p53ghippywz7fqkwo3nkzet@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
89d35528d17d ("netlink: Add new socket option to enable strict checking on dumps")
To silence this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/netlink.h' differs from latest version at 'include/uapi/linux/netlink.h'
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Leblond <eric@regit.org>
Link: https://lkml.kernel.org/n/tip-1xymkfjpmhxfzrs46t8z8mjw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For powerpc, s390, x86 and the main uapi linux/kvm.h header, none of
them entail changes in tooling.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-avn7iy8f4tcm2y40sbsdk31m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from:
20916d4636a9 ("mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes")
That do not entail changes in in tools, this just shows that we have to
consider bits [26:31] of flags to beautify that in tools like 'perf
trace'
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3rvc39lon93kgt5pl31d8g4x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of requiring us to go on and edit sources to add new flag.
# perf trace -e *mmap sleep 0.1
0.025 ( 0.005 ms): sleep/29876 mmap(len: 163746, prot: READ, flags: PRIVATE, fd: 3) = 0x7faa68ad1000
0.059 ( 0.004 ms): sleep/29876 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7faa68acf000
0.069 ( 0.006 ms): sleep/29876 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7faa6851f000
0.086 ( 0.009 ms): sleep/29876 mmap(addr: 0x7faa688cb000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) = 0x7faa688cb000
0.101 ( 0.005 ms): sleep/29876 mmap(addr: 0x7faa688d1000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7faa688d1000
0.348 ( 0.005 ms): sleep/29876 mmap(len: 111950656, prot: READ, flags: PRIVATE, fd: 3) = 0x7faa61a5b000
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ggmoy6vxoygh5yim890ht0kf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
