summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2019-11-12selftests: Add a test of large binary to devlink health testAya Levin
Add a test of 2 PAGEs size (exceeds devlink previous length limitation) of binary data on a 'devlink health dump show' command. Set binary length to 8192, issue a dump show command and clear it. Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) BPF sample build fixes from Björn Töpel 2) Fix powerpc bpf tail call implementation, from Eric Dumazet. 3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet. 4) Fix crash in ebtables when using dnat target, from Florian Westphal. 5) Fix port disable handling whne removing bcm_sf2 driver, from Florian Fainelli. 6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski. 7) Various KCSAN fixes all over the networking, from Eric Dumazet. 8) Memory leaks in mlx5 driver, from Alex Vesker. 9) SMC interface refcounting fix, from Ursula Braun. 10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu. 11) Add a TX lock to synchonize the kTLS TX path properly with crypto operations. From Jakub Kicinski. 12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano Garzarella. 13) Infinite loop in Intel ice driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) ixgbe: need_wakeup flag might not be set for Tx i40e: need_wakeup flag might not be set for Tx igb/igc: use ktime accessors for skb->tstamp i40e: Fix for ethtool -m issue on X722 NIC iavf: initialize ITRN registers with correct values ice: fix potential infinite loop because loop counter being too small qede: fix NULL pointer deref in __qede_remove() net: fix data-race in neigh_event_send() vsock/virtio: fix sock refcnt holding during the shutdown net: ethernet: octeon_mgmt: Account for second possible VLAN header mac80211: fix station inactive_time shortly after boot net/fq_impl: Switch to kvmalloc() for memory allocation mac80211: fix ieee80211_txq_setup_flows() failure path ipv4: Fix table id reference in fib_sync_down_addr ipv6: fixes rt6_probe() and fib6_nh->last_probe init net: hns: Fix the stray netpoll locks causing deadlock in NAPI path net: usb: qmi_wwan: add support for DW5821e with eSIM support CDC-NCM: handle incomplete transfer of MTU nfc: netlink: fix double device reference drop NFC: st21nfca: fix double free ...
2019-11-08selftest: net: add alternative names testJiri Pirko
Add a simple test for recently added netdevice alternative names. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: mlxsw: Add test cases for devlink-trap layer 3 exceptionsAmit Cohen
Test that each supported packet trap exception is triggered under the right conditions. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: forwarding: tc_common: Add hitting checkAmit Cohen
Add an option to check that packets hit the tc filter without providing the exact number of packets that should hit it. It is useful while sending many packets in background and checking that at least one of them hit the tc filter. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: forwarding: devlink: Add functionality for trap exceptions testAmit Cohen
Add common part of all the tests - check devlink status to ensure that packets were trapped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: mlxsw: Add test cases for devlink-trap layer 3 dropsAmit Cohen
Test that each supported packet trap is triggered under the right conditions and that packets are indeed dropped and not forwarded. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: devlink: Make devlink_trap_cleanup() more genericAmit Cohen
Add proto parameter in order to enable the use of devlink_trap_cleanup() in tests that use IPv6 protocol. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: devlink: Export functions to devlink libraryAmit Cohen
l2_drops_test() is used to check that drop traps are functioning as intended. Currently it is only used in the layer 2 test, but it is also useful for the layer 3 test introduced in the subsequent patch. l2_drops_cleanup() is used to clean configurations and kill mausezahn proccess. Export the functions to the common devlink library to allow it to be re-used by future tests. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: Add source route tests to fib_testsDavid Ahern
Add tests to verify routes with source address set are deleted when source address is deleted. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06selftest: net: add some traceroute testsFrancesco Ruggeri
Added the following traceroute tests. IPV6: Verify that in this scenario ------------------------ N2 | | ------ ------ N3 ---- | R1 | | R2 |------|H2| ------ ------ ---- | | ------------------------ N1 | ---- |H1| ---- where H1's default route goes through R1 and R1's default route goes through R2 over N2, traceroute6 from H1 to H2 reports R2's address on N2 and not N1. IPV4: Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario 1.0.3.1/24 ---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ---- |H1|--------------------------|R1|--------------------------|H2| ---- N1 ---- N2 ---- where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and 1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary address on N1. v2: fixed some typos, and have bridge in R1 instead of R2 in IPV6 test. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06selftests/tls: add test for concurrent recv and sendJakub Kicinski
Add a test which spawns 16 threads and performs concurrent send and recv calls on the same socket. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more fixes from Andrew Morton: "17 fixes" Mostly mm fixes and one ocfs2 locking fix. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges mm/memory_hotplug: fix updating the node span scripts/gdb: fix debugging modules compiled with hot/cold partitioning mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly MAINTAINERS: update information for "MEMORY MANAGEMENT" dump_stack: avoid the livelock of the dump_lock zswap: add Vitaly to the maintainers list mm/page_alloc.c: ratelimit allocation failure warnings more aggressively mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo mm, vmstat: hide /proc/pagetypeinfo from normal users mm/mmu_notifiers: use the right return code for WARN_ON ocfs2: protect extent tree in ocfs2_prepare_inode_for_write() mm: thp: handle page cache THP correctly in PageTransCompoundMap mm, meminit: recalculate pcpu batch and high limits after init completes mm/gup_benchmark: fix MAP_HUGETLB case mm: memcontrol: fix NULL-ptr deref in percpu stats flush
2019-11-06tc-testing: updated pedit TDC testsRoman Mashak
Added tests for u8/u32 clear value, u8/16 retain value, u16/32 invert value, u8/u16/u32 preserve value and test for negative offsets. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06selftests: devlink: undo changes at the end of resource_testJakub Kicinski
The netdevsim object is reused by all the tests, but the resource tests puts it into a broken state (failed reload in a different namespace). Make sure it's fixed up at the end of that test otherwise subsequent tests fail. Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06selftests: bpf: log direct file writesJakub Kicinski
Recent changes to netdevsim moved creating and destroying devices from netlink to sysfs. The sysfs writes have been implemented as direct writes, without shelling out. This is faster, but leaves no trace in the logs. Add explicit logs to make debugging possible. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06mm/gup_benchmark: fix MAP_HUGETLB caseJohn Hubbard
The MAP_HUGETLB ("-H" option) of gup_benchmark fails: $ sudo ./gup_benchmark -H mmap: Invalid argument This is because gup_benchmark.c is passing in a file descriptor to mmap(), but the fd came from opening up the /dev/zero file. This confuses the mmap syscall implementation, which thinks that, if the caller did not specify MAP_ANONYMOUS, then the file must be a huge page file. So it attempts to verify that the file really is a huge page file, as you can see here: ksys_mmap_pgoff() { if (!(flags & MAP_ANONYMOUS)) { retval = -EINVAL; if (unlikely(flags & MAP_HUGETLB && !is_file_hugepages(file))) goto out_fput; /* THIS IS WHERE WE END UP */ else if (flags & MAP_HUGETLB) { ...proceed normally, /dev/zero is ok here... ...and of course is_file_hugepages() returns "false" for the /dev/zero file. The problem is that the user space program, gup_benchmark.c, really just wants anonymous memory here. The simplest way to get that is to pass MAP_ANONYMOUS whenever MAP_HUGETLB is specified, so that's what this patch does. Link: http://lkml.kernel.org/r/20191021212435.398153-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-05tc-testing: added tests with cookie for mpls TC actionRoman Mashak
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-11-02 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 6 day(s) which contain a total of 8 files changed, 35 insertions(+), 9 deletions(-). The main changes are: 1) Fix ppc BPF JIT's tail call implementation by performing a second pass to gather a stable JIT context before opcode emission, from Eric Dumazet. 2) Fix build of BPF samples sys_perf_event_open() usage to compiled out unavailable test_attr__{enabled,open} checks. Also fix potential overflows in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel. 3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian archs like s390x and also improve the test coverage, from Ilya Leoshkevich. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge tag 'gpio-v5.4-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "More GPIO fixes! We found a late regression in the Intel Merrifield driver. Oh well. We fixed it up. - Fix a build error in the tools used for kselftest - A series of reverts to bring the Intel Merrifield back to working. We will likely unrevert the reverts for v5.5 but we can't have v5.4 broken" * tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: merrifield: Pass irqchip when adding gpiochip" Revert "gpio: merrifield: Restore use of irq_base" Revert "gpio: merrifield: Move hardware initialization to callback" tools: gpio: Use !building_out_of_srctree to determine srctree
2019-11-04bpf: re-fix skip write only files in debugfsDaniel Borkmann
Commit 5bc60de50dfe ("selftests: bpf: Don't try to read files without read permission") got reverted as the fix was not working as expected and real fix came in via 8101e069418d ("selftests: bpf: Skip write only files in debugfs"). When bpf-next got merged into net-next, the test_offload.py had a small conflict. Fix the resolution in ae8a76fb8b5d iby not reintroducing 5bc60de50dfe again. Fixes: ae8a76fb8b5d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03Merge tag 'usb-5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "The USB sub-maintainers woke up this past week and sent a bunch of tiny fixes. Here are a lot of small patches that that resolve a bunch of reported issues in the USB core, drivers, serial drivers, gadget drivers, and of course, xhci :) All of these have been in linux-next with no reported issues" * tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: dwc3: gadget: fix race when disabling ep with cancelled xfers usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host usb: cdns3: gadget: reset EP_CLAIMED flag while unloading USB: serial: whiteheat: fix line-speed endianness USB: serial: whiteheat: fix potential slab corruption USB: gadget: Reject endpoints with 0 maxpacket value UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") usbip: Fix free of unallocated memory in vhci tx usbip: tools: Fix read_usb_vudc_device() error path handling usb: xhci: fix __le32/__le64 accessors in debugfs code usb: xhci: fix Immediate Data Transfer endianness xhci: Fix use-after-free regression in xhci clear hub TT implementation USB: ldusb: fix control-message timeout USB: ldusb: use unsigned size format specifiers USB: ldusb: fix ring-buffer locking USB: Skip endpoints with 0 maxpacket length usb: cdns3: gadget: Don't manage pullups usb: dwc3: remove the call trace of USBx_GFLADJ usb: gadget: configfs: fix concurrent issue between composite APIs ...
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-11-02 The following pull-request contains BPF updates for your *net-next* tree. We've added 30 non-merge commits during the last 7 day(s) which contain a total of 41 files changed, 1864 insertions(+), 474 deletions(-). The main changes are: 1) Fix long standing user vs kernel access issue by introducing bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel. 2) Accelerated xskmap lookup, from Björn and Maciej. 3) Support for automatic map pinning in libbpf, from Toke. 4) Cleanup of BTF-enabled raw tracepoints, from Alexei. 5) Various fixes to libbpf and selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02bpf, testing: Add selftest to read/write sockaddr from user spaceDaniel Borkmann
Tested on x86-64 and Ilya was also kind enough to give it a spin on s390x, both passing with probe_user:OK there. The test is using the newly added bpf_probe_read_user() to dump sockaddr from connect call into .bss BPF map and overrides the user buffer via bpf_probe_write_user(): # ./test_progs [...] #17 pkt_md_access:OK #18 probe_user:OK #19 prog_run_xattr:OK [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/90f449d8af25354e05080e82fc6e2d3179da30ea.1572649915.git.daniel@iogearbox.net
2019-11-02bpf, testing: Convert prog tests to probe_read_{user, kernel}{, _str} helperDaniel Borkmann
Use probe read *_{kernel,user}{,_str}() helpers instead of bpf_probe_read() or bpf_probe_read_user_str() for program tests where appropriate. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/4a61d4b71ce3765587d8ef5cb93afa18515e5b3e.1572649915.git.daniel@iogearbox.net
2019-11-02bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpersDaniel Borkmann
The current bpf_probe_read() and bpf_probe_read_str() helpers are broken in that they assume they can be used for probing memory access for kernel space addresses /as well as/ user space addresses. However, plain use of probe_kernel_read() for both cases will attempt to always access kernel space address space given access is performed under KERNEL_DS and some archs in-fact have overlapping address spaces where a kernel pointer and user pointer would have the /same/ address value and therefore accessing application memory via bpf_probe_read{,_str}() would read garbage values. Lets fix BPF side by making use of recently added 3d7081822f7f ("uaccess: Add non-pagefault user-space read functions"). Unfortunately, the only way to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}() helpers are kept as-is to retain their current behavior. The two *_user() variants attempt the access always under USER_DS set, the two *_kernel() variants will -EFAULT when accessing user memory if the underlying architecture has non-overlapping address ranges, also avoiding throwing the kernel warning via 00c42373d397 ("x86-64: add warning for non-canonical user access address dereferences"). Fixes: a5e8c07059d0 ("bpf: add bpf_probe_read_str helper") Fixes: 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net
2019-11-02selftests: Add tests for automatic map pinningToke Høiland-Jørgensen
This adds a new BPF selftest to exercise the new automatic map pinning code. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157269298209.394725.15420085139296213182.stgit@toke.dk
2019-11-02libbpf: Add auto-pinning of maps when loading BPF objectsToke Høiland-Jørgensen
This adds support to libbpf for setting map pinning information as part of the BTF map declaration, to get automatic map pinning (and reuse) on load. The pinning type currently only supports a single PIN_BY_NAME mode, where each map will be pinned by its name in a path that can be overridden, but defaults to /sys/fs/bpf. Since auto-pinning only does something if any maps actually have a 'pinning' BTF attribute set, we default the new option to enabled, on the assumption that seamless pinning is what most callers want. When a map has a pin_path set at load time, libbpf will compare the map pinned at that location (if any), and if the attributes match, will re-use that map instead of creating a new one. If no existing map is found, the newly created map will instead be pinned at the location. Programs wanting to customise the pinning can override the pinning paths using bpf_map__set_pin_path() before calling bpf_object__load() (including setting it to NULL to disable pinning of a particular map). Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157269298092.394725.3966306029218559681.stgit@toke.dk
2019-11-02libbpf: Move directory creation into _pin() functionsToke Høiland-Jørgensen
The existing pin_*() functions all try to create the parent directory before pinning. Move this check into the per-object _pin() functions instead. This ensures consistent behaviour when auto-pinning is added (which doesn't go through the top-level pin_maps() function), at the cost of a few more calls to mkdir(). Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157269297985.394725.5882630952992598610.stgit@toke.dk
2019-11-02libbpf: Store map pin path and status in struct bpf_mapToke Høiland-Jørgensen
Support storing and setting a pin path in struct bpf_map, which can be used for automatic pinning. Also store the pin status so we can avoid attempts to re-pin a map that has already been pinned (or reused from a previous pinning). The behaviour of bpf_object__{un,}pin_maps() is changed so that if it is called with a NULL path argument (which was previously illegal), it will (un)pin only those maps that have a pin_path set. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157269297876.394725.14782206533681896279.stgit@toke.dk
2019-11-02libbpf: Fix error handling in bpf_map__reuse_fd()Toke Høiland-Jørgensen
bpf_map__reuse_fd() was calling close() in the error path before returning an error value based on errno. However, close can change errno, so that can lead to potentially misleading error messages. Instead, explicitly store errno in the err variable before each goto. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
2019-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix free/alloc races in batmanadv, from Sven Eckelmann. 2) Several leaks and other fixes in kTLS support of mlx5 driver, from Tariq Toukan. 3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke Høiland-Jørgensen. 4) Add an r8152 device ID, from Kazutoshi Noguchi. 5) Missing include in ipv6's addrconf.c, from Ben Dooks. 6) Use siphash in flow dissector, from Eric Dumazet. Attackers can easily infer the 32-bit secret otherwise etc. 7) Several netdevice nesting depth fixes from Taehee Yoo. 8) Fix several KCSAN reported errors, from Eric Dumazet. For example, when doing lockless skb_queue_empty() checks, and accessing sk_napi_id/sk_incoming_cpu lockless as well. 9) Fix jumbo packet handling in RXRPC, from David Howells. 10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet. 11) Fix DMA synchronization in gve driver, from Yangchun Fu. 12) Several bpf offload fixes, from Jakub Kicinski. 13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo. 14) Fix ping latency during high traffic rates in hisilicon driver, from Jiangfent Xiao. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) net: fix installing orphaned programs net: cls_bpf: fix NULL deref on offload filter removal selftests: bpf: Skip write only files in debugfs selftests: net: reuseport_dualstack: fix uninitalized parameter r8169: fix wrong PHY ID issue with RTL8168dp net: dsa: bcm_sf2: Fix IMP setup for port different than 8 net: phylink: Fix phylink_dbg() macro gve: Fixes DMA synchronization. inet: stop leaking jiffies on the wire ixgbe: Remove duplicate clear_bit() call Documentation: networking: device drivers: Remove stray asterisks e1000: fix memory leaks i40e: Fix receive buffer starvation for AF_XDP igb: Fix constant media auto sense switching when no cable is connected net: ethernet: arc: add the missed clk_disable_unprepare igb: Enable media autosense for the i350. igb/igc: Don't warn on fatal read failures when the device is removed tcp: increase tcp_max_syn_backlog max value net: increase SOMAXCONN to 4096 netdevsim: Fix use-after-free during device dismantle ...
2019-11-01selftests: bpf: Skip write only files in debugfsJakub Kicinski
DebugFS for netdevsim now contains some "action trigger" files which are write only. Don't try to capture the contents of those. Note that we can't use os.access() because the script requires root. Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01selftests: net: reuseport_dualstack: fix uninitalized parameterWei Wang
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN) occasionally due to the uninitialized length parameter. Initialize it to fix this, and also use int for "test_family" to comply with the API standard. Fixes: d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Cc: Craig Gallek <cgallek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01tc-testing: added tests with cookie for conntrack TC actionRoman Mashak
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01Revert "selftests: bpf: Don't try to read files without read permission"Jakub Kicinski
This reverts commit 5bc60de50dfe ("selftests: bpf: Don't try to read files without read permission"). Quoted commit does not work at all, and was never tested. Script requires root permissions (and tests for them) and os.access() will always return true for root. The correct fix is needed in the bpf tree, so let's just revert and save ourselves the merge conflict. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Pirko <jiri@resnulli.us> Link: https://lore.kernel.org/bpf/20191101005127.1355-1-jakub.kicinski@netronome.com
2019-10-31perf tools: Make usage of test_attr__* optional for perf-sys.hBjörn Töpel
For users of perf-sys.h outside perf, e.g. samples/bpf/bpf_load.c, it's convenient not to depend on test_attr__*. After commit 91854f9a077e ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h"), all users of perf-sys.h will depend on test_attr__enabled and test_attr__open. This commit enables a user to define HAVE_ATTR_TEST to zero in order to omit the test dependency. Fixes: 91854f9a077e ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: http://lore.kernel.org/bpf/20191001113307.27796-2-bjorn.topel@gmail.com
2019-10-31libbpf: Add support for prog_tracingAlexei Starovoitov
Cleanup libbpf from expected_attach_type == attach_btf_id hack and introduce BPF_PROG_TYPE_TRACING. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191030223212.953010-3-ast@kernel.org
2019-10-30tc-testing: implement tests for new fast_init action flagVlad Buslov
Add basic tests to verify action creation with new fast_init flag for all actions that support the flag. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30bpf: Allow narrow loads of bpf_sysctl fields with offset > 0Ilya Leoshkevich
"ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it reads the wrong byte, which happens to have the expected value of 0. Improve the test by seeking to the 4th byte and expecting 4 instead of 0. This makes the latent problem apparent: the test attempts to read the first byte of bpf_sysctl.file_pos, assuming this is the least-significant byte, which is not the case on big-endian machines: a non-zero offset is needed. The point of the test is to verify narrow loads, so we cannot cheat our way out by simply using BPF_W. The existence of the test means that such loads have to be supported, most likely because llvm can generate them. Fix the test by adding a big-endian variant, which uses an offset to access the least-significant byte of bpf_sysctl.file_pos. This reveals the final problem: verifier rejects accesses to bpf_sysctl fields with offset > 0. Such accesses are already allowed for a wide range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few. Extend this support to bpf_sysctl by using bpf_ctx_range instead of offsetof when matching field offsets. Fixes: 7b146cebe30c ("bpf: Sysctl hook") Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx") Fixes: 9a1027e52535 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
2019-10-30tc-testing: fixed two failing pedit testsRoman Mashak
Two pedit tests were failing due to incorrect operation value in matchPattern, should be 'add' not 'val', so fix it. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30selftests/bpf: Test narrow load from bpf_sysctl.writeIlya Leoshkevich
There are tests for full and narrows loads from bpf_sysctl.file_pos, but for bpf_sysctl.write only full load is tested. Add the missing test. Suggested-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20191029143027.28681-1-iii@linux.ibm.com
2019-10-29libbpf: Don't use kernel-side u32 type in xsk.cAndrii Nakryiko
u32 is a kernel-side typedef. User-space library is supposed to use __u32. This breaks Github's projection of libbpf. Do u32 -> __u32 fix. Fixes: 94ff9ebb49a5 ("libbpf: Fix compatibility for kernels without need_wakeup") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20191029055953.2461336-1-andriin@fb.com
2019-10-28libbpf: Fix off-by-one error in ELF sanity checkAndrii Nakryiko
libbpf's bpf_object__elf_collect() does simple sanity check after iterating over all ELF sections, if checks that .strtab index is correct. Unfortunately, due to section indices being 1-based, the check breaks for cases when .strtab ends up being the very last section in ELF. Fixes: 77ba9a5b48a7 ("tools lib bpf: Fetch map names from correct strtab") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191028233727.1286699-1-andriin@fb.com
2019-10-28libbpf: Fix compatibility for kernels without need_wakeupMagnus Karlsson
When the need_wakeup flag was added to AF_XDP, the format of the XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the kernel to take care of compatibility issues arrising from running applications using any of the two formats. However, libbpf was not extended to take care of the case when the application/libbpf uses the new format but the kernel only supports the old format. This patch adds support in libbpf for parsing the old format, before the need_wakeup flag was added, and emulating a set of static need_wakeup flags that will always work for the application. v2 -> v3: * Incorporated code improvements suggested by Jonathan Lemon v1 -> v2: * Rebased to bpf-next * Rewrote the code as the previous version made you blind Fixes: a4500432c2587cb2a ("libbpf: add support for need_wakeup flag in AF_XDP part") Reported-by: Eloy Degen <degeneloy@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com
2019-10-28usbip: tools: Fix read_usb_vudc_device() error path handlingGwanYeong Kim
This isn't really accurate right. fread() doesn't always return 0 in error. It could return < number of elements and set errno. Signed-off-by: GwanYeong Kim <gy741.kim@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191018032223.4644-1-gy741.kim@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28selftests/bpf: Restore $(OUTPUT)/test_stub.o ruleIlya Leoshkevich
`make O=/linux-build kselftest TARGETS=bpf` fails with make[3]: *** No rule to make target '/linux-build/bpf/test_stub.o', needed by '/linux-build/bpf/test_verifier' The same command without the O= part works, presumably thanks to the implicit rule. Fix by restoring the explicit $(OUTPUT)/test_stub.o rule. Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028102110.7545-1-iii@linux.ibm.com
2019-10-28selftest/bpf: Use -m{little, big}-endian for clangIlya Leoshkevich
When cross-compiling tests from x86 to s390, the resulting BPF objects fail to load due to endianness mismatch. Fix by using BPF-GCC endianness check for clang as well. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028102049.7489-1-iii@linux.ibm.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 17:33:40 +0000