| Age | Commit message (Collapse) | Author |
|---|
|
The current implementation for UDP GRO tests is racy: the receiver
may flush the RX queue while the sending is still transmitting and
incorrectly report RX errors, with a wrong number of packet received.
Add explicit timeouts to the receiver for both connection activation
(first packet received for UDP) and reception completion, so that
in the above critical scenario the receiver will wait for the
transfer completion.
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a couple of new tests, explicitly checking that the kernel
timely releases PMTU exceptions on related device removal.
This is mostly a regression test vs the issue fixed by
commit f5b51fe804ec ("ipv6: route: purge exception on removal")
Only 2 new test cases have been added, instead of extending all
the existing ones, because the reproducer requires executing
several commands and would slow down too much the tests otherwise.
v2 -> v3:
- more cleanup, still from Stefano
v1 -> v2:
- several script cleanups, as suggested by Stefano
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise, the configured IPv6 address could be still "tentative"
at test time, possibly causing tests failures.
We can also drop some sleep along the code and decrease the
timeout for most commands so that the test runtime decreases.
v1 -> v2:
- fix comment (Stefano)
Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after
changing carrier"), wait one second to allow linkwatch to propagate the
carrier change to the stack.
There are two sets of carrier tests. The first slept after the carrier
was set to off, and when the second set ran, it was likely that the
linkwatch would be able to run again without much delay, reducing the
likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a
loop, you will quickly notice the failures.
Sleeping on the second set of tests make the failures go away.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
trie_delete_elem() was deleting an entry even though it was not matching
if the prefixlen was correct. This patch adds a check on matchlen.
Reproducer:
$ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1
$ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
key: 10 00 00 00 aa bb cc dd value: 01
Found 1 element
$ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff
$ echo $?
0
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
Found 0 elements
A similar reproducer is added in the selftests.
Without the patch:
$ sudo ./tools/testing/selftests/bpf/test_lpm_map
test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed.
Aborted
With the patch: test_lpm_map runs without errors.
Fixes: e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pull networking fixes from David Miller:
1) Fix MAC address setting in mac80211 pmsr code, from Johannes Berg.
2) Probe SFP modules after being attached, from Russell King.
3) Byte ordering bug in SMC rx_curs_confirmed code, from Ursula Braun.
4) Revert some r8169 changes that are causing regressions, from Heiner
Kallweit.
5) Fix spurious connection timeouts in netfilter nat code, from Florian
Westphal.
6) SKB leak in tipc, from Hoang Le.
7) Short packet checkum issue in mlx4, similar to a previous mlx5
change, from Saeed Mahameed. The issue is that whilst padding bytes
are usually zero, it is not guarateed and the hardware doesn't take
the padding bytes into consideration when generating the checksum.
8) Fix various races in cls_tcindex, from Cong Wang.
9) Need to set stream ext to NULL before freeing in SCTP code, from Xin
Long.
10) Fix locking in phy_is_started, from Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
net: ethernet: freescale: set FEC ethtool regs version
net: hns: Fix object reference leaks in hns_dsaf_roce_reset()
mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs
net: phy: fix potential race in the phylib state machine
net: phy: don't use locking in phy_is_started
selftests: fix timestamping Makefile
net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend()
net: fix possible overflow in __sk_mem_raise_allocated()
dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit
net: phy: fix interrupt handling in non-started states
sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate
sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment
net/mlx5e: XDP, fix redirect resources availability check
net/mlx5: Fix a compilation warning in events.c
net/mlx5: No command allowed when command interface is not ready
net/mlx5e: Fix NULL pointer derefernce in set channels error flow
netfilter: nft_compat: use-after-free when deleting targets
team: avoid complex list operations in team_nl_cmd_options_set()
net_sched: fix two more memory leaks in cls_tcindex
net_sched: fix a memory leak in cls_tcindex
...
|
|
The clean target in the makefile conflicts with the generic
kselftests lib.mk, and fails to properly remove the compiled
test programs.
Remove the redundant rule, the TEST_GEN_FILES will be already
removed by the CLEAN macro in lib.mk.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Bob Tracy <rct@frus.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A couple of kernel side fixes:
- Fix the Intel uncore driver on certain hardware configurations
- Fix a CPU hotplug related memory allocation bug
- Remove a spurious WARN()
... plus also a handful of perf tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf script python: Add Python3 support to tests/attr.py
perf trace: Support multiple "vfs_getname" probes
perf symbols: Filter out hidden symbols from labels
perf symbols: Add fallback definitions for GELF_ST_VISIBILITY()
tools headers uapi: Sync linux/in.h copy from the kernel sources
perf clang: Do not use 'return std::move(something)'
perf mem/c2c: Fix perf_mem_events to support powerpc
perf tests evsel-tp-sched: Fix bitwise operator
perf/core: Don't WARN() for impossible ring-buffer sizes
perf/x86/intel: Delay memory deallocation until x86_pmu_dead_cpu()
perf/x86/intel/uncore: Add Node ID mask
|
|
Pull networking fixes from David Miller:
"This pull request is dedicated to the upcoming snowpocalypse parts 2
and 3 in the Pacific Northwest:
1) Drop profiles are broken because some drivers use dev_kfree_skb*
instead of dev_consume_skb*, from Yang Wei.
2) Fix IWLWIFI kconfig deps, from Luca Coelho.
3) Fix percpu maps updating in bpftool, from Paolo Abeni.
4) Missing station release in batman-adv, from Felix Fietkau.
5) Fix some networking compat ioctl bugs, from Johannes Berg.
6) ucc_geth must reset the BQL queue state when stopping the device,
from Mathias Thore.
7) Several XDP bug fixes in virtio_net from Toshiaki Makita.
8) TSO packets must be sent always on queue 0 in stmmac, from Jose
Abreu.
9) Fix socket refcounting bug in RDS, from Eric Dumazet.
10) Handle sparse cpu allocations in bpf selftests, from Martynas
Pumputis.
11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
Feitkau.
12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
Greg Kroah-Hartman.
13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
ccid, from Eric Dumazet.
14) Need to reload WoL password into bcmsysport device after deep
sleeps, from Florian Fainelli.
15) Remove filter from mask before freeing in cls_flower, from Petr
Machata.
16) Missing release and use after free in error paths of s390 qeth
code, from Julian Wiedmann.
17) Fix lockdep false positive in dsa code, from Marc Zyngier.
18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.
19) Fix EQ firmware assert in qed driver, from Manish Chopra.
20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net: dsa: b53: Fix for failure when irq is not defined in dt
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
net: Don't default Cavium PTP driver to 'y'
net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net/mlx5e: Don't overwrite pedit action when multiple pedit used
net/mlx5e: Update hw flows when encap source mac changed
qed*: Advance drivers version to 8.37.0.20
qed: Change verbosity for coalescing message.
qede: Fix system crash on configuring channels.
qed: Consider TX tcs while deriving the max num_queues for PF.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.0-rc6.
Nothing huge here, some more binderfs fixups found as people use it,
and there is a "large" selftest added to validate the binderfs code,
which makes up the majority of this pull request.
There's also some small mei and mic fixes to resolve some reported
issues.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mic: vop: Fix crash on remove
mic: vop: Fix use-after-free on remove
binderfs: remove separate device_initcall()
fpga: stratix10-soc: fix wrong of_node_put() in init function
mic: vop: Fix broken virtqueues
mei: free read cb on ctrl_wr list flush
samples: mei: use /dev/mei0 instead of /dev/mei
mei: me: add ice lake point device id.
binderfs: respect limit on binder control creation
binder: fix CONFIG_ANDROID_BINDER_DEVICES
selftests: add binderfs selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some small iio and staging driver fixes for 5.0-rc6.
Nothing big, just resolve some reported IIO driver issues, and one
staging driver bug. One staging driver patch was added and then
reverted as well.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()"
staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()
staging: octeon: fix broken phylib usage
iio: ti-ads8688: Update buffer allocation for timestamps
tools: iio: iio_generic_buffer: make num_loops signed
iio: adc: axp288: Fix TS-pin handling
iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
|
|
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:
$ perf trace -e open -- touch /dev/null
[...]
0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
[...]
The output without such beautifier looks like:
0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:
0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
Fix it by hooking into all the expanded probes (inlines), now, for instance:
[root@quaco ~]# perf probe -l
probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname)
[root@quaco ~]# perf trace -e open* sleep 1
0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC) = 3
0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC) = 3
0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
[root@quaco ~]#
Works, further verified with:
[root@quaco ~]# perf test vfs
65: Use vfs_getname probe to get syscall args filenames : Ok
66: Add vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@quaco ~]#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:
# nm perf | grep annobin | head -10
0000000000241100 t .annobin_annotate.c
0000000000326490 t .annobin_annotate.c
0000000000249255 t .annobin_annotate.c_end
00000000003283a8 t .annobin_annotate.c_end
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bc3e2 t .annobin_annotate.c_end.unlikely
00000000001bc400 t .annobin_annotate.c_end.unlikely
00000000001bce18 t .annobin_annotate.c.hot
00000000001bce18 t .annobin_annotate.c.hot
...
Those symbols have no use for report or annotation and should be
skipped. Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:
# perf test dwarf -v
59: Test dwarf unwind :
--- start ---
test child forked, pid 8515
unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
...
got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
unwind: failed with 'no error'
The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:
# readelf -s ./perf | grep annobin | head -1
40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c
They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.
> Just to be awkward, if you are going to ignore STV_HIDDEN
> symbols then you should probably also ignore STV_INTERNAL ones
> as well... Annobin does not generate them, but you never know,
> one day some other tool might create some.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Those aren't present in Alpine Linux 3.4 to edge, so provide fallback
defines to get the next patch building there keeping the build
bisectable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-03cg3gya2ju4ba2x6ibb9fuz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in this cset:
f275ee0fa3a0 ("IN_BADCLASS: fix macro to actually work")
The macros changed in this cset are not used in tools/, so this is just
to silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xbk34kwamn8bw8ywpuxetct9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It prevents copy elision, generating this warning when building with
fedora:rawhide's clang:
clang version 7.0.1 (Fedora 7.0.1-2.fc30)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Found candidate GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9
Found candidate GCC installation: /usr/lib/gcc/x86_64-redhat-linux/9
Selected GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9
Candidate multilib: .;@m64
Candidate multilib: 32;@m32
Selected multilib: .;@m64
$ make -C tools/perf CC=clang LIBCLANGLLVM=1
<SNIP>
util/c++/clang.cpp: In function 'std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)':
util/c++/clang.cpp:163:18: error: moving a local object in a return statement prevents copy elision [-Werror=pessimizing-move]
163 | return std::move(Buffer);
| ~~~~~~~~~^~~~~~~~
util/c++/clang.cpp:163:18: note: remove 'std::move' call
cc1plus: all warnings being treated as errors
<SNIP>
References:
http://www.cplusplus.com/forum/general/186411/#msg908572
https://en.cppreference.com/w/cpp/language/return#Notes
https://en.cppreference.com/w/cpp/language/copy_elision
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-lehqf5x5q96l0o8myhb6blz6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
PowerPC hardware does not have a builtin latency filter (--ldlat) for
the "mem-load" event and perf_mem_events by default includes
"/ldlat=30/" which is causing a failure on PowerPC. Refactor the code to
support "perf mem/c2c" on PowerPC.
This patch depends on kernel side changes done my Madhavan:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-December/182596.html
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Dick Fowles <fowles@inreach.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190129132412.771-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Notice that the use of the bitwise OR operator '|' always leads to true
in this particular case, which seems a bit suspicious due to the context
in which this expression is being used.
Fix this by using bitwise AND operator '&' instead.
This bug was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 6a6cd11d4e57 ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190122233439.GA5868@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Check basic nat/redirect/masquerade for ipv4 and ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
- Fix broken sanity check in the /proc/sys/kernel/perf_cpu_time_max_percent
write handler
- Cure a perf script crash which caused by an unitinialized data
structure
- Highlight the hottest instruction in perf top and not a random one
- Cure yet another clang issue when building perf python
- Handle topology entries with no CPU correctly in the tools
- Handle perf data which contains both tracepoints and performance
counter entries correctly.
- Add a missing NULL pointer check in perf ordered_events_free()"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf script: Fix crash when processing recorded stat data
perf top: Fix wrong hottest instruction highlighted
perf tools: Handle TOPOLOGY headers with no CPU
perf python: Remove -fstack-clash-protection when building with some clang versions
perf core: Fix perf_proc_update_handler() bug
perf script: Fix crash with printing mixed trace point and other events
perf ordered_events: Fix crash in ordered_events__free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 5.0 cycle.
Been a busy month, so these are rather later than they should have been.
* atlas-ph-sensor:
- Temperature scale didn't correspond to the ABI.
* axp288:
- A few different fixes around the TS-pin handling.
* ti-ads8688
- Not enough space in the buffer used to build the scan to allow for
the timestamp.
* tools - iio_generic_buffer
- Make num_loops signed so that we really are running for ever
rather than just a long time when we specify -1.
* tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ti-ads8688: Update buffer allocation for timestamps
tools: iio: iio_generic_buffer: make num_loops signed
iio: adc: axp288: Fix TS-pin handling
iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
|
|
/proc entries under /proc/net/* can't be cached into dcache because
setns(2) can change current net namespace.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: avoid vim miscolorization]
[adobriyan@gmail.com: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time]
Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2
Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2
Fixes: 1da4d377f943fe4194ffb9fb9c26cc58fad4dd24 ("proc: revalidate misc dentries")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Mateusz Stępień <mateusz.stepien@netrounds.com>
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-01-31
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) disable preemption in sender side of socket filters, from Alexei.
2) fix two potential deadlocks in syscall bpf lookup and prog_register,
from Martin and Alexei.
3) fix BTF to allow typedef on func_proto, from Yonghong.
4) two bpftool fixes, from Jiri and Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.
E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.
This patch fixes the function by making it parse all CPU ranges and
elements.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This consists of run-time fixes to cpu-hotplug, and seccomp tests,
compile fixes to ir, net, and timers Makefiles"
* tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: timers: use LDLIBS instead of LDFLAGS
selftests: net: use LDLIBS instead of LDFLAGS
selftests/seccomp: Enhance per-arch ptrace syscall skip tests
selftests: Use lirc.h from kernel tree, not from system
selftests: cpu-hotplug: fix case where CPUs offline > CPUs present
|
|
This adds the promised selftest for binderfs. It will verify the following
things:
- binderfs mounting works
- binder device allocation works
- performing a binder ioctl() request through a binderfs device works
- binder device removal works
- binder-control removal fails
- binderfs unmounting works
The tests are performed both privileged and unprivileged. The latter
verifies that binderfs behaves correctly in user namespaces.
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed one test_btf raw test such that typedef func_proto
is permitted now.
Fixes: 78a2540e8945 ("tools/bpf: Add tests for BTF_KIND_FUNC_PROTO and BTF_KIND_FUNC")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Need to save away the IV across tls async operations, from Dave
Watson.
2) Upon successful packet processing, we should liberate the SKB with
dev_consume_skb{_irq}(). From Yang Wei.
3) Only apply RX hang workaround on effected macb chips, from Harini
Katakam.
4) Dummy netdev need a proper namespace assigned to them, from Josh
Elsasser.
5) Some paths of nft_compat run lockless now, and thus we need to use a
proper refcnt_t. From Florian Westphal.
6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua.
7) netrom does not refcount sockets properly wrt. timers, fix that by
using the sock timer API. From Cong Wang.
8) Fix locking of inexact inserts of xfrm policies, from Florian
Westphal.
9) Missing xfrm hash generation bump, also from Florian.
10) Missing of_node_put() in hns driver, from Yonglong Liu.
11) Fix DN_IFREQ_SIZE, from Johannes Berg.
12) ip6mr notifier is invoked during traversal of wrong table, from Nir
Dotan.
13) TX promisc settings not performed correctly in qed, from Manish
Chopra.
14) Fix OOB access in vhost, from Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
MAINTAINERS: Add entry for XDP (eXpress Data Path)
net: set default network namespace in init_dummy_netdev()
net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
net: caif: call dev_consume_skb_any when skb xmit done
net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: macb: Apply RXUBR workaround only to versions with errata
net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: tls: Fix deadlock in free_resources tx
net: tls: Save iv in tls_rec for async crypto requests
vhost: fix OOB in get_rx_bufs()
qed: Fix stack out of bounds bug
qed: Fix system crash in ll2 xmit
qed: Fix VF probe failure while FLR
qed: Fix LACP pdu drops for VFs
qed: Fix bug in tx promiscuous mode settings
net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
netfilter: ipt_CLUSTERIP: fix warning unused variable cn
...
|
|
Prog arrays don't have 'owner_prog_type' and 'owner_jited'
fields in their fdinfo when they are created. Those fields
are set and reported when first program is checked for
compatibility by bpf_prog_array_compatible().
This means that bpftool cannot expect the fields to always
be there. Currently trying to show maps on a system with
an un-owned prog array leads to a crash:
$ bpftool map show
389: prog_array name tail_call_map flags 0x0
Error: key 'owner_prog_type' not found in fdinfo
Error: key 'owner_jited' not found in fdinfo
key 4B value 4B max_entries 4 memlock 4096B
Segmentation fault (core dumped)
We pass a NULL pointer to atoi().
Remove the assumption that fdinfo keys are always present.
Add missing validations and remove the p_err() calls which
may lead to broken JSON output as caller will not propagate
the failure.
Fixes: 99a44bef5870 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
posix_timers fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
-DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
posix_timers.c
-o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
/tmp/cc1FTZzT.o: In function `check_timer_create':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
undefined reference to `timer_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
undefined reference to `timer_settime'
collect2: error: ld returned 1 exit status
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
reuseport_bpf_numa fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc
--sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
-Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c
-o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
/tmp/ccfUuExT.o: In function `send_from_node':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
undefined reference to `numa_run_on_node'
/tmp/ccfUuExT.o: In function `main':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
undefined reference to `numa_available'
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
undefined reference to `numa_max_node'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the swapped outb() parameters in the KASLR code
- Fix the PKEY handling at fork which missed to preserve the pkey
state for the child. Comes with a test case to validate that.
- Fix the entry stack handling for XEN PV to respect that XEN PV
systems enter the function already on the current thread stack and
not on the trampoline.
- Fix kexec load failure caused by using a stale value when the
kexec_buf structure is reused for subsequent allocations.
- Fix a bogus sizeof() in the memory encryption code
- Enforce PCI dependency for the Intel Low Power Subsystem
- Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
x86/entry/64/compat: Fix stack switching for XEN PV
x86/kexec: Fix a kexec_file_load() failure
x86/mm/mem_encrypt: Fix erroneous sizeof()
x86/selftests/pkeys: Fork() to check for state being preserved
x86/pkeys: Properly copy pkey state at fork()
x86/kaslr: Fix incorrect i8254 outb() parameters
x86/intel/lpss: Make PCI dependency explicit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2019-01-25
1) Several patches to fix the fallout from the recent
tree based policy lookup work. From Florian Westphal.
2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets.
We need an extra IPIP handler to process these packets
correctly. From Su Yanjun.
3) Fix validation of template and selector families for
MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets.
This can lead to a stack-out-of-bounds because
flowi4 struct is treated as flowi6 struct.
Fix from Florian Westphal.
4) Restore the default behaviour of the xfrm set-mark
in the output path. This was changed accidentally
when mark setting was extended to the input path.
From Benedict Wong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull KVM fixes from Paolo Bonzini:
"Quite a few fixes for x86: nested virtualization save/restore, AMD
nested virtualization and virtual APIC, 32-bit fixes, an important fix
to restore operation on older processors, and a bunch of hyper-v
bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Mark expected switch fall-throughs
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
KVM: selftests: check returned evmcs version range
x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
kvm: selftests: Fix region overlap check in kvm_util
kvm: vmx: fix some -Wmissing-prototypes warnings
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
svm: Fix AVIC incomplete IPI emulation
svm: Add warning message for AVIC IPI invalid target
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM: x86: Fix PV IPIs for 32-bit KVM host
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
kvm: x86/vmx: Use kzalloc for cached_vmcs12
KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
KVM: x86: Fix single-step debugging
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for namespace label support for non-Intel NVDIMMs that implement
the ACPI standard label method.
This has apparently never worked and could wait for v5.1. However it
has enough visibility with hardware vendors [1] and distro bug
trackers [2], and low enough risk that I decided it should go in for
-rc4. The other fixups target the new, for v5.0, nvdimm security
functionality. The larger init path fixup closes a memory leak and a
potential userspace lockup due to missed notifications.
[1] https://github.com/pmem/ndctl/issues/78
[2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785
These have all soaked in -next for a week with no reported issues.
Summary:
- Fix support for NVDIMMs that implement the ACPI standard label
methods.
- Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup"
* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix command-supported detection
acpi/nfit: Block function zero DSMs
libnvdimm/security: Require nvdimm_security_setup_events() to succeed
nfit_test: fix security state pull for nvdimm security nfit_test
|
|
Passing EPERM during syscall skipping was confusing since the test wasn't
actually exercising the errno evaluation -- it was just passing a literal
"1" (EPERM). Instead, expand the tests to check both direct value returns
(positive, 45000 in this case), and errno values (negative, -ESRCH in this
case) to check both fake success and fake failure during syscall skipping.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: a33b2d0359a0 ("selftests/seccomp: Add tests for basic ptrace actions")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
When the system lirc.h is older than v4.16, you will get errors like:
ir_loopback.c:32:16: error: field ‘proto’ has incomplete type
enum rc_proto proto;
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline. However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline. Fix this by testing the maximum present CPU instead.
Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.
Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.
Tested: Compiled tools/testing/selftests/kvm with -static
Ran all resulting test binaries on an Intel Haswell test machine
All tests passed
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.
This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.
v2 -> v3:
- drop unused argument, as per Quentin's suggestion
v1 -> v2:
- rename the helper as per Quentin's suggestion
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:
# bpftool prog
28: kprobe name trace_req_start tag 1dfc28ba8b3dd597 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 112B jited 109B memlock 4096B map_ids 13
29: kprobe name trace_req_compl tag 5b6a5ecc6030a683 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 928B jited 575B memlock 4096B map_ids 13,14
# bpftool prog dum jited tag 1dfc28ba8b3dd597
0: push %rbp
1: mov %rsp,%rbp
...
# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address
The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.
Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to rtc, seccomp and other tests"
* tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Abort without user notification support
selftests: gpio-mockup-chardev: Check asprintf() for error
selftests: seccomp: use LDLIBS instead of LDFLAGS
selftests/vm/gup_benchmark.c: match gup struct to kernel
tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header
x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded"
selftests: rtc: rtctest: add alarm test on minute boundary
selftests: rtc: rtctest: fix alarm tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
Kernel:
Stephane Eranian:
- Fix perf_proc_update_handler() bug.
perf script:
Andi Kleen:
- Fix crash with printing mixed trace point and other events.
Tony Jones:
- Fix crash when processing recorded stat data.
perf top:
He Kuang:
- Fix wrong hottest instruction highlighted.
perf python:
Arnaldo Carvalho de Melo:
- Remove -fstack-clash-protection when building with some clang versions.
perf ordered_events:
Jiri Olsa:
- Fix out of buffers crash in ordered_events__free().
perf cpu_map:
Stephane Eranian:
- Handle TOPOLOGY headers with no CPU.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The override status function needs to be updated to use the proper
request parameter in order to get the security state.
Fixes: 3c13e2ac747a ("...Add test support for Intel nvdimm security DSMs")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While updating perf to work with Python3 and Python2 I noticed that the
stat-cpi script was dumping core.
$ perf stat -e cycles,instructions record -o /tmp/perf.data /bin/false
Performance counter stats for '/bin/false':
802,148 cycles
604,622 instructions 802,148 cycles
604,622 instructions
0.001445842 seconds time elapsed
$ perf script -i /tmp/perf.data -s scripts/python/stat-cpi.py
Segmentation fault (core dumped)
...
...
rblist=rblist@entry=0xb2a200 <rt_stat>,
new_entry=new_entry@entry=0x7ffcb755c310) at util/rblist.c:33
ctx=<optimized out>, type=<optimized out>, create=<optimized out>,
cpu=<optimized out>, evsel=<optimized out>) at util/stat-shadow.c:118
ctx=<optimized out>, type=<optimized out>, st=<optimized out>)
at util/stat-shadow.c:196
count=count@entry=727442, cpu=cpu@entry=0, st=0xb2a200 <rt_stat>)
at util/stat-shadow.c:239
config=config@entry=0xafeb40 <stat_config>,
counter=counter@entry=0x133c6e0) at util/stat.c:372
...
...
The issue is that since 1fcd03946b52 perf_stat__update_shadow_stats now calls
update_runtime_stat passing rt_stat rather than calling update_stats but
perf_stat__init_shadow_stats has never been called to initialize rt_stat in
the script path processing recorded stat data.
Since I can't see any reason why perf_stat__init_shadow_stats() is presently
initialized like it is in builtin-script.c::perf_sample__fprint_metric()
[4bd1bef8bba2f] I'm proposing it instead be initialized once in __cmd_script
Committer testing:
After applying the patch:
# perf script -i /tmp/perf.data -s tools/perf/scripts/python/stat-cpi.py
0.001970: cpu -1, thread -1 -> cpi 1.709079 (1075684/629394)
#
No segfault.
Signed-off-by: Tony Jones <tonyj@suse.de>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Fixes: 1fcd03946b52 ("perf stat: Update per-thread shadow stats")
Link: http://lkml.kernel.org/r/20190120191414.12925-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The annotation line percentage is compared and inserted into the rbtree,
but the percent field of 'struct annotation_data' is an array, the
comparison result between them is the address difference.
This patch compares the right slot of percent array according to
opts->percent_type and makes things right.
The problem can be reproduced by pressing 'H' in perf top annotation view.
It should highlight the instruction line which has the highest sampling
percentage.
Signed-off-by: He Kuang <hekuang@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190120160523.4391-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
