| Age | Commit message (Collapse) | Author |
|---|
|
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The vcpu mmap area may consist of more than just the kvm_run struct.
Allocate enough space for the entire vcpu mmap area. Without this, on
x86, the PIO page, for example, will be missing. This is problematic
when dealing with an unhandled exception from the guest as the exception
vector will be incorrectly reported as 0x0.
Message-Id: <20210210165035.3712489-1-aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Co-developed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The variable in practice will never be uninitialized, because the
loop will always go through at least one iteration.
In case it would not, make vcpu_get_cpuid report an assertion
failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This test launches 512 VMs in serial and kills them after a random
amount of time.
The test was original written to exercise KVM user notifiers in
the context of1650b4ebc99d:
- KVM: Disable irq while unregistering user notifier
- https://lore.kernel.org/kvm/CACXrx53vkO=HKfwWwk+fVpvxcNjPrYmtDZ10qWxFvVX_PTGp3g@mail.gmail.com/
Recently, this test piqued my interest because it proved useful to
for AMD SNP in exercising the "in-use" pages, described in APM section
15.36.12, "Running SNP-Active Virtual Machines".
Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Signed-off-by: Marc Orr <marcorr@google.com>
Message-Id: <20210213001452.1719001-1-marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
|
|
Don't bother mapping the Xen shinfo pages into the guest, they don't need
to be accessed using the GVAs and passing a define with "GPA" in the name
to addr_gva2hpa() is confusing.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-5-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Xen shinfo selftest uses '40' when setting the GPA of the vCPU info
struct, but checks for the result at '0x40'. Arbitrarily use the hex
version to resolve the bug.
Fixes: 8d4e7e80838f ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-4-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For better or worse, the memslot APIs take the number of pages, not the
size in bytes. The Xen tests need 2 pages, not 8192 pages.
Fixes: 8d4e7e80838f ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-3-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the new Xen test binaries to KVM selftest's .gitnore.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-2-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fixes: 678e90a349a4 ("KVM: selftests: Test IPI to halted vCPU in xAPIC while backing page moves")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210011747.240913-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Building the KVM selftests with LLVM's integrated assembler fails with:
$ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
lib/x86_64/svm.c:77:16: error: too few operands for instruction
asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
^
<inline asm>:1:2: note: instantiated into assembly here
vmsave
^
lib/x86_64/svm.c:134:3: error: too few operands for instruction
"vmload\n\t"
^
<inline asm>:1:2: note: instantiated into assembly here
vmload
^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.
Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.
Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/X+Df2oQczVBmwEzi@google.com/
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20210210031719.769837-1-ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether
KVM supports 2nd DAWR or not. The capability is by default disabled
even when the underlying CPU supports 2nd DAWR. QEMU needs to check
and enable it manually to use the feature.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR.
DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/
unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR.
Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Hyper-V emulation is enabled in KVM unconditionally. This is bad at least
from security standpoint as it is an extra attack surface. Ideally, there
should be a per-VM capability explicitly enabled by VMM but currently it
is not the case and we can't mandate one without breaking backwards
compatibility. We can, however, check guest visible CPUIDs and only enable
Hyper-V emulation when "Hv#1" interface was exposed in
HYPERV_CPUID_INTERFACE.
Note, VMMs are free to act in any sequence they like, e.g. they can try
to set MSRs first and CPUIDs later so we still need to allow the host
to read/write Hyper-V specific MSRs unconditionally.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-14-vkuznets@redhat.com>
[Add selftest vcpu_set_hv_cpuid API to avoid breaking xen_vmcall_test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Generally, when Hyper-V emulation is enabled, VMM is supposed to set
Hyper-V CPUID identifications so the guest knows that Hyper-V features
are available. evmcs_test doesn't currently do that but so far Hyper-V
emulation in KVM was enabled unconditionally. As we are about to change
that, proper Hyper-V CPUID identification should be set in selftests as
well.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_get_supported_hv_cpuid() may come handy in all Hyper-V related tests.
Split it off hyperv_cpuid test, create system-wide and vcpu versions.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With the updated maximum number of user memslots (32)
set_memory_region_test sometimes takes longer than the default 45 seconds
to finish. Raise the value to an arbitrary 120 seconds.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of adding a plethora of new KVM_CAP_XEN_FOO capabilities, just
add bits to the return value of KVM_CAP_XEN_HVM.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
|
|
Disambiguate Xen vs. Hyper-V calls by adding 'orl $0x80000000, %eax'
at the start of the Hyper-V hypercall page when Xen hypercalls are
also enabled.
That bit is reserved in the Hyper-V ABI, and those hypercall numbers
will never be used by Xen (because it does precisely the same trick).
Switch to using kvm_vcpu_write_guest() while we're at it, instead of
open-coding it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
|
|
Add a new exit reason for emulator to handle Xen hypercalls.
Since this means KVM owns the ABI, dispense with the facility for the
VMM to provide its own copy of the hypercall pages; just fill them in
directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page.
This behaviour is enabled by a new INTERCEPT_HCALL flag in the
KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag
being returned from the KVM_CAP_XEN_HVM check.
Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it
to the nascent xen.c while we're at it, and add a test case.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
|
|
KVM_GET_SUPPORTED_CPUID
Commit 181f494888d5 ("KVM: x86: fix CPUID entries returned by
KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2
ioctl at all. Add a test for it and also check that from inside the guest
visible CPUIDs are equal to it's output.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210129161821.74635-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This test will check the effect of various CPUID settings on the
MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes
with KVM_SET_MSR is _not_ modified from the guest and can be retrieved
with KVM_GET_MSR, and check that invalid LBR formats are rejected.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210201051039.255478-12-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Disabling dirty logging is much more intestesting from a testing
perspective if the vCPUs are still running. This also excercises the
code-path in which collapsible SPTEs must be faulted back in at a higher
level after disabling dirty logging.
To: linux-kselftest@vger.kernel.org
CC: Peter Xu <peterx@redhat.com>
CC: Andrew Jones <drjones@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-29-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a parameter to control the backing memory type for
dirty_log_perf_test so that the test can be run with hugepages.
To: linux-kselftest@vger.kernel.org
CC: Peter Xu <peterx@redhat.com>
CC: Andrew Jones <drjones@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-28-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a memslot modification stress test in which a memslot is repeatedly
created and removed while vCPUs access memory in another memslot. Most
userspaces do not create or remove memslots on running VMs which makes
it hard to test races in adding and removing memslots without a
dedicated test. Adding and removing a memslot also has the effect of
tearing down the entire paging structure, which leads to more page
faults and pressure on the page fault handling path than a one-and-done
memory population test.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add an option to overlap the ranges of memory each vCPU accesses instead
of partitioning them. This option will increase the probability of
multiple vCPUs faulting on the same page at the same time, and causing
interesting races, if there are bugs in the page fault handler or
elsewhere in the kernel.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently the population stage in the dirty_log_perf_test does nothing
as the per-vCPU iteration counters are not initialized and the loop does
not wait for each vCPU. Remedy those errors.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In order to add an iteration -1 to indicate that the memory population
phase has not yet completed, convert the interations counters to ints.
No functional change intended.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Peter Xu pointed out that a log message printed while waiting for the
memory population phase of the dirty_log_perf_test will flood the debug
logs as there is no delay after printing the message. Since the message
does not provide much value anyway, remove it.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In response to some earlier comments from Peter Xu, rename
timespec_diff_now to the much more sensible timespec_elapsed.
No functional change intended.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When a guest is using xAPIC KVM allocates a backing page for the required
EPT entry for the APIC access address set in the VMCS. If mm decides to
move that page the KVM mmu notifier will update the VMCS with the new
HPA. This test induces a page move to test that APIC access continues to
work correctly. It is a directed test for
commit e649b3f0188f "KVM: x86: Fix APIC page invalidation race".
Tested: ran for 1 hour on a skylake, migrating backing page every 1ms
Depends on patch "selftests: kvm: Add exception handling to selftests"
from aaronlewis@google.com that has not yet been queued.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20201105223823.850068-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'CPU too large' error in Intel PT
- Correct event attribute sizes in 'perf inject'
- Sync build_bug.h and kvm.h kernel copies
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example
- libbpf tests fixes
- Fix shadow stat 'perf test' for non-bash shells
- Take cgroups into account for shadow stats in 'perf stat'
* tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Correct event attribute sizes
perf intel-pt: Fix 'CPU too large' error
perf stat: Take cgroups into account for shadow stats
perf stat: Introduce struct runtime_stat_data
libperf tests: Fail when failing to get a tracepoint id
libperf tests: If a test fails return non-zero
libperf tests: Avoid uninitialized variable warning
perf test: Fix shadow stat test for non-bash shells
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf bpf examples: Fix bpf.h header include directive in 5sec.c example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
|
|
When 'perf inject' reads a perf.data file from an older version of perf,
it writes event attributes into the output with the original size field,
but lays them out as if they had the size currently used. Readers see a
corrupt file. Update the size field to match the layout.
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124195818.30603-1-al.grant@arm.com
Signed-off-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As of now it doesn't consider cgroups when collecting shadow stats and
metrics so counter values from different cgroups will be saved in a same
slot. This resulted in incorrect numbers when those cgroups have
different workloads.
For example, let's look at the scenario below: cgroups A and C runs same
workload which burns a cpu while cgroup B runs a light workload.
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
3,958,116,522 cycles A
6,722,650,929 instructions A # 2.53 insn per cycle
1,132,741 cycles B
571,743 instructions B # 0.00 insn per cycle
4,007,799,935 cycles C
6,793,181,523 instructions C # 2.56 insn per cycle
1.001050869 seconds time elapsed
When I run 'perf stat' with single workload, it usually shows IPC around
1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A.
But in this case, since cgroups are ignored, cycles are averaged so it
used the lower value for IPC calculation and resulted in around 2.5.
avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066
IPC (A) : 6722650929 / 2655683066 = 2.531
IPC (B) : 571743 / 2655683066 = 0.0002
IPC (C) : 6793181523 / 2655683066 = 2.557
We can simply compare cgroup pointers in the evsel and it'll be NULL
when cgroups are not specified. With this patch, I can see correct
numbers like below:
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
4,171,051,687 cycles A
7,219,793,922 instructions A # 1.73 insn per cycle
1,051,189 cycles B
583,102 instructions B # 0.55 insn per cycle
4,171,124,710 cycles C
7,192,944,580 instructions C # 1.72 insn per cycle
1.007909814 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pass more info to the saved_value in the runtime_stat, add a new
struct runtime_stat_data. Currently it only has 'ctx' field but later
patch will add more.
Note that we intentionally pass 0 as ctx to clock-related events for
compatibility. It was already there in a few places. So move the code
into the saved_value_lookup() explicitly and add a comment.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Permissions are necessary to get a tracepoint id. Fail the test when the
read fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a test fails return -1 rather than 0. This is consistent with the
return value in test-cpumap.c
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The variable 'bf' is read (for a write call) without being initialized
triggering a memory sanitizer warning. Use 'bf' in the read and switch
the write to reading from a string.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114212304.4018119-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was using some bash-specific features and failed to parse when
running with a different shell like below:
root@kbl-ppc:~/kbl-ws/perf-dev/lck-9077/acme.tmp/tools/perf# ./perf test 83 -vv
83: perf stat metrics (shadow stat) test :
--- start ---
test child forked, pid 3922
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 45: ./tests/shell/stat+shadow_stat.sh: declare: not found
test child finished with -1
---- end ----
perf stat metrics (shadow stat) test: FAILED!
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114050609.1258820-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
3a176b94609a18f5 ("Revert "kbuild: avoid static_assert for genksyms"")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h'
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
647daca25d24fb6e ("KVM: SVM: Add support for booting APs in an SEV-ES guest")
That don't cause any tooling change, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was looking at bpf/bpf.h, which caused this problem:
# perf trace -e tools/perf/examples/bpf/5sec.c
/home/acme/git/perf/tools/perf/examples/bpf/5sec.c:42:10: fatal error: 'bpf/bpf.h' file not found
#include <bpf/bpf.h>
^~~~~~~~~~~
1 error generated.
ERROR: unable to compile tools/perf/examples/bpf/5sec.c
Hint: Check error message shown above.
Hint: You can also pre-compile it into .o using:
clang -target bpf -O2 -c tools/perf/examples/bpf/5sec.c
with proper -I and -D options.
event syntax error: 'tools/perf/examples/bpf/5sec.c'
\___ Failed to load tools/perf/examples/bpf/5sec.c from source: Error when compiling BPF scriptlet
#
Change that to plain bpf.h, to make it work again:
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
# perf trace -e tools/perf/examples/bpf/5sec.c/max-stack=16/ sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
hrtimer_nanosleep ([kernel.kallsyms])
common_nsleep ([kernel.kallsyms])
__x64_sys_clock_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__clock_nanosleep_2 (/usr/lib64/libc-2.32.so)
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 4s
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The SVE and FPSIMD stress tests have a spelling mistake in the output, fix
it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210108183144.673-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fix from Steven Rostedt:
"Update bootconf scripts for tracing_on option
The tracing_on option is supported by bootconfig entries, but the
scripts to convert from ftrace to a bootconfig and back were not
updated"
* tag 'trace-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Add tracing_on support to helper scripts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"One single fix to skip BPF selftests by default.
BPF selftests have a hard dependency on cutting edge versions of tools
in the BPF ecosystem including LLVM.
Skipping BPF allows by default will make it easier for users
interested in running kselftest as a whole. Users can include BPF in
Kselftest build by via SKIP_TARGETS variable"
* tag 'linux-kselftest-fixes-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Skip BPF seftests by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
to not underestimate the skb sizes, and my fix for brokenness of
register_netdevice() error path. They may uncover other bugs so we
will keep an eye on them. Also included are Willem's fixes for
kmap(_atomic).
Looking at the "current release" fixes, it seems we are about one rc
behind a normal cycle. We've previously seen an uptick of "people had
run their test suites" / "humans actually tried to use new features"
fixes between rc2 and rc3.
Summary:
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs"
* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
mptcp: fix locking in mptcp_disconnect()
net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
MAINTAINERS: dccp: move Gerrit Renker to CREDITS
MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
MAINTAINERS: tls: move Aviad to CREDITS
MAINTAINERS: ena: remove Zorik Machulsky from reviewers
MAINTAINERS: vrf: move Shrijeet to CREDITS
MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
MAINTAINERS: altx: move Jay Cliburn to CREDITS
net: avoid 32 x truesize under-estimation for tiny skbs
nt: usb: USB_RTL8153_ECM should not default to y
net: stmmac: fix taprio configuration when base_time is in the past
net: stmmac: fix taprio schedule configuration
net: tip: fix a couple kernel-doc markups
net: sit: unregister_netdevice on newlink's error path
net: stmmac: Fixed mtu channged by cache aligned
cxgb4/chtls: Fix tid stuck due to wrong update of qid
i40e: fix potential NULL pointer dereferencing
net: stmmac: use __napi_schedule() for PREEMPT_RT
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
...
|
|
Add ftrace.instance.INSTANCE.tracing_on support to ftrace2bconf.sh
and bconf2ftrace.sh.
commit 8490db06f914 ("tracing/boot: Add per-instance tracing_on
option support") added the per-instance tracing_on option,
but forgot to update the helper scripts.
Link: https://lkml.kernel.org/r/160749166410.3497930.14204335886811029800.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 8490db06f914 ("tracing/boot: Add per-instance tracing_on option support")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Pass conntrack -f to specify family in netfilter conntrack helper
selftests, from Chen Yi.
2) Honor hashsize modparam from nf_conntrack_buckets sysctl,
from Jesper D. Brouer.
3) Fix memleak in nf_nat_init() error path, from Dinghao Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nf_nat: Fix memleak in nf_nat_init
netfilter: conntrack: fix reading nf_conntrack_buckets
selftests: netfilter: Pass family parameter "-f" to conntrack tool
====================
Link: https://lore.kernel.org/r/20210112222033.9732-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
