summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2017-12-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot. 2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik Brueckner. 3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes Berg. 4) Add missing barriers to ptr_ring, from Michael S. Tsirkin. 5) Don't advertise gigabit in sh_eth when not available, from Thomas Petazzoni. 6) Check network namespace when delivering to netlink taps, from Kevin Cernekee. 7) Kill a race in raw_sendmsg(), from Mohamed Ghannam. 8) Use correct address in TCP md5 lookups when replying to an incoming segment, from Christoph Paasch. 9) Add schedule points to BPF map alloc/free, from Eric Dumazet. 10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also from Eric Dumazet. 11) Fix SKB leak in tipc, from Jon Maloy. 12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz. 13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn. 14) Add some new qmi_wwan device IDs, from Daniele Palmas. 15) Fix static key imbalance in ingress qdisc, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: qcom/emac: Reduce timeout for mdio read/write net: sched: fix static key imbalance in case of ingress/clsact_init error net: sched: fix clsact init error path ip_gre: fix wrong return value of erspan_rcv net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support pkt_sched: Remove TC_RED_OFFLOADED from uapi net: sched: Move to new offload indication in RED net: sched: Add TCA_HW_OFFLOAD net: aquantia: Increment driver version net: aquantia: Fix typo in ethtool statistics names net: aquantia: Update hw counters on hw init net: aquantia: Improve link state and statistics check interval callback net: aquantia: Fill in multicast counter in ndev stats from hardware net: aquantia: Fill ndev stat couters from hardware net: aquantia: Extend stat counters to 64bit values net: aquantia: Fix hardware DMA stream overload on large MRRS net: aquantia: Fix actual speed capabilities reporting sock: free skb in skb_complete_tx_timestamp on error s390/qeth: update takeover IPs after configuration change s390/qeth: lock IP table while applying takeover changes ...
2017-12-15Merge tag 'usb-4.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes for 4.15-rc4. There is the usual handful gadget/dwc2/dwc3 fixes as always, for reported issues. But the most important things in here is the core fix from Alan Stern to resolve a nasty security bug (my first attempt is reverted, Alan's was much cleaner), as well as a number of usbip fixes from Shuah Khan to resolve those reported security issues. All of these have been in linux-next with no reported issues" * tag 'usb-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: core: prevent malicious bNumInterfaces overflow Revert "USB: core: only clean up what we allocated" USB: core: only clean up what we allocated Revert "usb: gadget: allow to enable legacy drivers without USB_ETH" usb: gadget: webcam: fix V4L2 Kconfig dependency usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3 usb: dwc3: of-simple: set dev_pm_ops usb: dwc3: of-simple: fix missing clk_disable_unprepare usb: dwc3: gadget: Wait longer for controller to end command processing usb: xhci: fix TDS for MTK xHCI1.1 xhci: Don't add a virt_dev to the devs array before it's fully allocated usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer usbip: prevent vhci_hcd driver from leaking a socket pointer address usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input usbip: fix stub_rx: get_pipe() to validate endpoint number tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent gcc with -Werror) USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID usb: musb: da8xx: fix babble condition handling
2017-12-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio regression fixes from Michael Tsirkin: "Fixes two issues in the latest kernel" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_mmio: fix devm cleanup ptr_ring: fix up after recent ptr_ring changes
2017-12-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix the s2ram regression related to confusion around segment register restoration, plus related cleanups that make the code more robust - a guess-unwinder Kconfig dependency fix - an isoimage build target fix for certain tool chain combinations - instruction decoder opcode map fixes+updates, and the syncing of the kernel decoder headers to the objtool headers - a kmmio tracing fix - two 5-level paging related fixes - a topology enumeration fix on certain SMP systems" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version x86/decoder: Fix and update the opcodes map x86/power: Make restore_processor_context() sane x86/power/32: Move SYSENTER MSR restoration to fix_processor_context() x86/power/64: Use struct desc_ptr for the IDT in struct saved_context x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with CONFIG_STACKDEPOT=y x86/build: Don't verify mtools configuration file for isoimage x86/mm/kmmio: Fix mmiotrace for page unaligned addresses x86/boot/compressed/64: Print error if 5-level paging is not supported x86/boot/compressed/64: Detect and handle 5-level paging at boot-time x86/smpboot: Do not use smp_num_siblings in __max_logical_packages calculation
2017-12-15Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Misc fixes: - Fix a S390 boot hang that was caused by the lock-break logic. Remove lock-break to begin with, as review suggested it was unreasonably fragile and our confidence in its continued good health is lower than our confidence in its removal. - Remove the lockdep cross-release checking code for now, because of unresolved false positive warnings. This should make lockdep work well everywhere again. - Get rid of the final (and single) ACCESS_ONCE() straggler and remove the API from v4.15. - Fix a liblockdep build warning" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/lib/lockdep: Add missing declaration of 'pr_cont()' checkpatch: Remove ACCESS_ONCE() warning compiler.h: Remove ACCESS_ONCE() tools/include: Remove ACCESS_ONCE() tools/perf: Convert ACCESS_ONCE() to READ_ONCE() locking/lockdep: Remove the cross-release locking checks locking/core: Remove break_lock field when CONFIG_GENERIC_LOCKBREAK=y locking/core: Fix deadlock during boot on systems with GENERIC_LOCKBREAK
2017-12-15tools/headers: Synchronize kernel <-> tooling headersIngo Molnar
Two kernel headers got modified recently, which are used by tooling as well: tools/include/uapi/linux/kvm.h arch/x86/include/asm/cpufeatures.h None of those changes have an effect on tooling, so do a plain copy. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-15objtool: Resync objtool's instruction decoder source code copy with the ↵Ingo Molnar
kernel's latest version This fixes the following warning: warning: objtool: x86 instruction decoder differs from kernel Note that there are cleanups queued up for v4.16 that will make this warning more informative and will make the syncing easier as well. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-15x86/decoder: Fix and update the opcodes mapRandy Dunlap
Update x86-opcode-map.txt based on the October 2017 Intel SDM publication. Fix INVPID to INVVPID. Add UD0 and UD1 instruction opcodes. Also sync the objtool and perf tooling copies of this file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-14tools/slabinfo-gnuplot: force to use bash shellLiu, Changcheng
On some linux distributions, the default link of sh is dash which deoesn't support split array like "${var//,/ }" It's better to force to use bash shell directly. Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofia Signed-off-by: Liu Changcheng <changcheng.liu@intel.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-13tools/lib/lockdep: Add missing declaration of 'pr_cont()'Mengting Zhang
Commit: 681fbec881de ("lockdep: Use consistent printing primitives") has moved lockdep away from using printk() for printing. The commit added usage of pr_cont() which wasn't wrapped in the userspace headers, causing the following warning for the liblockdep build: ../../../kernel/locking/lockdep.c:3544:2: warning: implicit declaration of function 'pr_cont' [-Wimplicit-function-declaration] Adding an empty declaration of 'pr_cont' fixes the problem. Signed-off-by: Mengting Zhang <zhangmengting@huawei.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20171212181644.11913-2-alexander.levin@verizon.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12bpf: fix broken BPF selftest buildDaniel Borkmann
At least on x86_64, the kernel's BPF selftests seemed to have stopped to build due to 618e165b2a8e ("selftests/bpf: sync kernel headers and introduce arch support in Makefile"): [...] In file included from test_verifier.c:29:0: ../../../include/uapi/linux/bpf_perf_event.h:11:32: fatal error: asm/bpf_perf_event.h: No such file or directory #include <asm/bpf_perf_event.h> ^ compilation terminated. [...] While pulling in tools/arch/*/include/uapi/asm/bpf_perf_event.h seems to work fine, there's no automated fall-back logic right now that would do the same out of tools/include/uapi/asm-generic/bpf_perf_event.h. The usual convention today is to add a include/[uapi/]asm/ equivalent that would pull in the correct arch header or generic one as fall-back, all ifdef'ed based on compiler target definition. It's similarly done also in other cases such as tools/include/asm/barrier.h, thus adapt the same here. Fixes: 618e165b2a8e ("selftests/bpf: sync kernel headers and introduce arch support in Makefile") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-12tools/include: Remove ACCESS_ONCE()Mark Rutland
There are no longer any usersapce uses of ACCESS_ONCE(), so we can remove the definition from our userspace <linux/compiler.h>, which is only used by tools in the kernel directory (i.e. it isn't a uapi header). This patch removes the ACCESS_ONCE() definition, and updates comments which referred to it. At the same time, some inconsistent and redundant whitespace is removed from comments. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: apw@canonical.com Link: http://lkml.kernel.org/r/20171127103824.36526-3-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12tools/perf: Convert ACCESS_ONCE() to READ_ONCE()Mark Rutland
Recently there was a treewide conversion of ACCESS_ONCE() to {READ,WRITE}_ONCE(), but a new use was introduced concurrently by commit: 1695849735752d2a ("perf mmap: Move perf_mmap and methods to separate mmap.[ch] files") Let's convert this over to READ_ONCE() so that we can remove the ACCESS_ONCE() definitions in subsequent patches. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: apw@canonical.com Link: http://lkml.kernel.org/r/20171127103824.36526-2-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12Merge tag 'fixes-for-v4.15-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.15-rc4 We have a few fixes on dwc3: - one fix which only happens with some implementations where we need to wait longer for some commands to finish. - Another fix for high-bandwidth isochronous endpoint programming making sure that we send the correct DATA tokens in the correct sequence - A couple PM fixes on dwc3-of-simple The other synopsys controller driver (dwc2) got a fix for FIFO size programming. Other than these, we have a couple Kconfig fixes making sure that dependencies are properly setup.
2017-12-08kmemcheck: rip it out for realMichal Hocko
Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb drivers). 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates to userspace and broke some apps. From Johannes Berg. 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong Wang. 4) Gianfar MAC can't do EEE so don't advertise it by default, from Claudiu Manoil. 5) Relax strict netlink attribute validation, but emit a warning. From David Ahern. 6) Fix regression in checksum offload of thunderx driver, from Florian Westphal. 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner. 8) New card support in iwlwifi, from Ihab Zhaika. 9) BBR congestion control bug fixes from Neal Cardwell. 10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren. 11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan. 12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni. 13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) net: mvpp2: fix the RSS table entry offset tcp: evaluate packet losses upon RTT change tcp: fix off-by-one bug in RACK tcp: always evaluate losses in RACK upon undo tcp: correctly test congestion state in RACK bnxt_en: Fix sources of spurious netpoll warnings tcp_bbr: reset long-term bandwidth sampling on loss recovery undo tcp_bbr: reset full pipe detection on loss recovery undo tcp_bbr: record "full bw reached" decision in new full_bw_reached bit sfc: pass valid pointers from efx_enqueue_unwind gianfar: Disable EEE autoneg by default tcp: invalidate rate samples during SACK reneging can: peak/pcie_fd: fix potential bug in restarting tx queue can: usb_8dev: cancel urb on -EPIPE and -EPROTO can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: mcba_usb: cancel urb on -EPROTO usbnet: fix alignment for frames with no ethernet header tcp: use current time in tcp_rcv_space_adjust() ...
2017-12-08usbip: prevent vhci_hcd driver from leaking a socket pointer addressShuah Khan
When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent ↵Julien BOIBESSOT
gcc with -Werror) Fixes following build error: vhci_driver.c: In function 'refresh_imported_device_list': vhci_driver.c:118:37: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=] snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~ vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into a destination of size 17 snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08ptr_ring: fix up after recent ptr_ring changesMichael S. Tsirkin
Add more stubs to make it build. Fixes: 81fbfe8a ("ptr_ring: use kmalloc_array()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This includes perf namespace support kernel side fixes, plus an accumulated set of perf tooling fixes - including UAPI header synchronization that should make the perf build less noisy" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) tooling/headers: Synchronize updated s390 and x86 UAPI headers tools headers: Syncronize mman.h ABI header tools headers: Synchronize prctl.h ABI header tools headers: Synchronize KVM arch ABI headers tools headers: Synchronize drm/i915_drm.h tools headers uapi: Synchronize drm/drm.h tools headers: Synchronize perf_event.h header tools headers: Synchronize kernel ABI headers wrt SPDX tags tools/headers: Synchronize kernel x86 UAPI headers perf intel-pt: Bring instruction decoder files into line with the kernel perf test: Fix test 21 for s390x perf bench numa: Fixup discontiguous/sparse numa nodes perf top: Use signal interface for SIGWINCH handler perf top: Fix window dimensions change handling perf: Fix header.size for namespace events perf top: Ignore kptr_restrict when not sampling the kernel perf record: Ignore kptr_restrict when not sampling the kernel perf report: Ignore kptr_restrict when not sampling the kernel perf evlist: Add helper to check if attr.exclude_kernel is set in all evsels perf test shell: Fix test case probe libc's inet_pton on s390x ...
2017-12-06tooling/headers: Synchronize updated s390 and x86 UAPI headersIngo Molnar
There were two trivial updates to these upstream UAPI headers: arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm_perf.h arch/x86/lib/x86-opcode-map.txt Synchronize them with their tooling copies. (The x86 opcode map includes a new instruction pattern now.) Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-06Merge branch 'linus' into perf/urgent, to synchronize UAPI headersIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-06objtool: Fix 64-bit build on 32-bit hostMikulas Patocka
The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit host. Building the kernel on a i386 or x32 host fails with: orc_dump.c: In function 'orc_dump': orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types] if (elf_getshdrnum(elf, &nr_sections)) { ^ In file included from /usr/local/include/gelf.h:32:0, from elf.h:22, from warn.h:26, from orc_dump.c:20: /usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *' extern int elf_getshdrnum (Elf *__elf, size_t *__dst); ^~~~~~~~~~~~~~ orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=] printf("%s+%lx:", name, rela.r_addend); ~~^ ~~~~~~~~~~~~~ %llx Fix the build failure. Another problem is that if the user specifies HOSTCC or HOSTLD variables, they are ignored in the objtool makefile. Change the Makefile to respect these variables. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Joachim <svenjoac@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-05Merge tag 'char-misc-4.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small misc driver fixes for 4.15-rc3 to resolve reported issues. Specifically these are: - binder fix for a memory leak - vpd driver fixes for a number of reported problems - hyperv driver fix for memory accesses where it shouldn't be. All of these have been in linux-next for a while. There's also one more MAINTAINERS file update that came in today to get the Android developer's emails correct, which is also in this pull request, that was not in linux-next, but should not be an issue" * tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: update Android driver maintainers. firmware: vpd: Fix platform driver and device registration/unregistration firmware: vpd: Tie firmware kobject to device lifetime firmware: vpd: Destroy vpd sections in remove function hv: kvp: Avoid reading past allocated blocks from KVP file Drivers: hv: vmbus: Fix a rescind issue ANDROID: binder: fix transaction leak.
2017-12-05Merge tag 'usb-4.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a few minor USB fixes for 4.15-rc3. The largest here is the Kconfig text and configuration changes for the USB TypeC build options that you reported during the -rc1 merge window. The others are all just small fixes for reported issues, as well as some new device ids. The most "interesting" of anything here is the usbip fixes as it seems lots of people are starting to pay attention to that driver at the moment. These fixes should resolve all of the reported problems as of now. Of course there are the usual xhci and gadget fixes as well, can't go a pull request without those... All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: xhci: fix panic in xhci_free_virt_devices_depth_first xhci: Don't show incorrect WARN message about events for empty rings usbip: fix usbip attach to find a port that matches the requested speed usbip: Fix USB device hang due to wrong enabling of scatter-gather uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub usb: build drivers/usb/common/ when USB_SUPPORT is set usb: hub: Cycle HUB power when initialization fails USB: core: Add type-specific length check of BOS descriptors usb: host: fix incorrect updating of offset USB: ulpi: fix bus-node lookup USB: usbfs: Filter flags passed in from user space usb: add user selectable option for the whole USB Type-C Support usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT usb: gadget: core: Fix ->udc_set_speed() speed handling usb: gadget: allow to enable legacy drivers without USB_ETH usb: gadget: udc: renesas_usb3: fix number of the pipes usb: gadget: don't dereference g until after it has been null checked USB: serial: usb_debug: add new USB device id usb: bdc: fix platform_no_drv_owner.cocci warnings ...
2017-12-05perf s390: add regs_query_register_offset()Hendrik Brueckner
The regs_query_register_offset() helper function converts register name like "%r0" to an offset of a register in user_pt_regs It is required by the BPF prologue generator. The user_pt_regs structure was recently added to "asm/ptrace.h". Hence, update tools/perf/check-headers.sh to keep the header file in sync with kernel changes. Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05selftests/bpf: sync kernel headers and introduce arch support in MakefileHendrik Brueckner
Synchronize the uapi kernel header files which solves the broken uapi export of pt_regs. Because of arch-specific uapi headers, extended the include path in the Makefile. With this change, the test_verifier program compiles and runs successfully on s390. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various TCP control block fixes, including one that crashes with SELinux, from David Ahern and Eric Dumazet. 2) Fix ACK generation in rxrpc, from David Howells. 3) ipvlan doesn't set the mark properly in the ipv4 route lookup key, from Gao Feng. 4) SIT configuration doesn't take on the frag_off ipv4 field configuration properly, fix from Hangbin Liu. 5) TSO can fail after device down/up on stmmac, fix from Lars Persson. 6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet. 7) Various SKB leak fixes in vhost/tun/tap (mostly observed as performance problems). From Wei Xu. 8) mvpps's TX descriptors were not zero initialized, from Yan Markman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match() tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() rxrpc: Fix the MAINTAINERS record rxrpc: Use correct netns source in rxrpc_release_sock() liquidio: fix incorrect indentation of assignment statement stmmac: reset last TSO segment size after device open ipvlan: Add the skb->mark as flow4's member to lookup route s390/qeth: build max size GSO skbs on L2 devices s390/qeth: fix GSO throughput regression s390/qeth: fix thinko in IPv4 multicast address tracking tap: free skb if flags error tun: free skb in early errors vhost: fix skb leak in handle_rx() bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg() bnxt_en: fix dst/src fid for vxlan encap/decap actions bnxt_en: wildcard smac while creating tunnel decap filter bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown phylink: ensure we take the link down when phylink_stop() is called sfp: warn about modules requiring address change sequence sfp: improve RX_LOS handling ...
2017-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a compilation warning in xdp redirect tracepoint due to missing bpf.h include that pulls in struct bpf_map, from Xie. 2) Limit the maximum number of attachable BPF progs for a given perf event as long as uabi is not frozen yet. The hard upper limit is now 64 and therefore the same as with BPF multi-prog for cgroups. Also add related error checking for the sample BPF loader when enabling and attaching to the perf event, from Yonghong. 3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log case, so that the test case can always pass and not fail in some environments due to too low default limit, also from Yonghong. 4) Fix up a missing license header comment for kernel/bpf/offload.c, from Jakub. 5) Several fixes for bpftool, among others a crash on incorrect arguments when json output is used, error message handling fixes on unknown options and proper destruction of json writer for some exit cases, all from Quentin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30Merge tag 'pm-4.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: - add missing module information to the Mediatek cpufreq driver module (Jesse Chan) - fix config dependencies for the Loongson cpufreq driver (James Hogan) - fix two issues related to CPU offline in the cpupower utility (Abhishek Goel). * tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE cpufreq: Add Loongson machine dependencies cpupower : Fix cpupower working when cpu0 is offline cpupowerutils: bench - Fix cpu online check
2017-11-30tools/bpf: adjust rlimit RLIMIT_MEMLOCK for test_verifier_logYonghong Song
The default rlimit RLIMIT_MEMLOCK is 64KB. In certain cases, e.g. in a test machine mimicking our production system, this test may fail due to unable to charge the required memory for prog load: # ./test_verifier_log Test log_level 0... ERROR: Program load returned: ret:-1/errno:1, expected ret:-1/errno:22 Changing the default rlimit RLIMIT_MEMLOCK to unlimited makes the test always pass. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30usbip: fix usbip attach to find a port that matches the requested speedShuah Khan
usbip attach fails to find a free port when the device on the first port is a USB_SPEED_SUPER device and non-super speed device is being attached. It keeps checking the first port and returns without a match getting stuck in a loop. Fix it check to find the first port with matching speed. Reported-by: Juan Zea <juan.zea@qindel.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30tools: bpftool: declare phony targets as suchQuentin Monnet
In the Makefile, targets install, doc and doc-install should be added to .PHONY. Let's fix this. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30tools: bpftool: unify installation directoriesQuentin Monnet
Programs and documentation not managed by package manager are generally installed under /usr/local/, instead of the user's home directory. In particular, `man` is generally able to find manual pages under `/usr/local/share/man`. bpftool generally follows perf's example, and perf installs to home directory. However bpftool requires root credentials, so it seems sensible to follow the more common convention of installing files under /usr/local instead. So, make /usr/local the default prefix for installing the binary with `make install`, and the documentation with `make doc-install`. Also, create /usr/local/sbin if it does not exist. Note that the bash-completion file, however, is still installed under /usr/share/bash-completion/completions, as the default setup for bash does not attempt to load completion files under /usr/local/. Reported-by: David Beckett <david.beckett@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30tools: bpftool: remove spurious line break from error messageQuentin Monnet
The end-of-line character inside the string would break JSON compliance. Remove it, `p_err()` already adds a '\n' character for plain output anyway. Fixes: 9a5ab8bf1d6d ("tools: bpftool: turn err() and info() macros into functions") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30tools: bpftool: make error message from getopt_long() JSON-friendlyQuentin Monnet
If `getopt_long()` meets an unknown option, it prints its own error message to standard error output. While this does not strictly break JSON output, it is the only case bpftool prints something to standard error output if JSON output is required. All other errors are printed on standard output as JSON objects, so that an external program does not have to parse stderr. This is changed by setting the global variable `opterr` to 0. Furthermore, p_err() is used to reproduce the error message in a more JSON-friendly way, so that users still get to know what the erroneous option is. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30tools: bpftool: clean up the JSON writer before exiting in usage()Quentin Monnet
The writer is cleaned at the end of the main function, but not if the program exits sooner in usage(). Let's keep it clean and destroy the writer before exiting. Destruction and actual call to exit() are moved to another function so that clean exit can also be performed without printing usage() hints. Fixes: d35efba99d92 ("tools: bpftool: introduce --json and --pretty options") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30tools: bpftool: fix crash on bad parameters with JSONQuentin Monnet
If bad or unrecognised parameters are specified after JSON output is requested, `usage()` will try to output null JSON object before the writer is created. To prevent this, create the writer as soon as the `--json` option is parsed. Fixes: 004b45c0e51a ("tools: bpftool: provide JSON output for all possible commands") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-28tools headers: Syncronize mman.h ABI headerArnaldo Carvalho de Melo
To add support for the MAP_SYNC flag introduced in: b6fb293f2497 ("mm: Define MAP_SYNC and VM_SYNC flags") Update tools/perf/trace/beauty/mmap.c to support that flag. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman.h' differs from latest version at 'include/uapi/asm-generic/mman.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-14zyk3iywrj37c7g1eagmzbo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools headers: Synchronize prctl.h ABI headerArnaldo Carvalho de Melo
To pick up changes from: 2d2123bc7c7f ("arm64/sve: Add prctl controls for userspace vector length management") 7582e22038a2 ("arm64/sve: Backend logic for setting the vector length") That showed a limitation of the regexp used in tools/perf/trace/beauty/prctl_option.sh, that matches only PR_{SET,GET}_, but should match a few more, like PR_MPX_*, PR_CAP_* and the one added by the above commit, PR_SVE_SET_*. This silences this warning when building tools/perf: Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' Support for those extra prctl options should be left for the next merge window tho. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-r52dsyuzy04qzqyfcifjs35t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools headers: Synchronize KVM arch ABI headersArnaldo Carvalho de Melo
To pick up changes from these csets: da9a1446d248 ("KVM: s390: provide a capability for AIS state migration") 5c5196da4e96 ("KVM: arm/arm64: Support EL1 phys timer register access in set/get reg") None of which affects buildint tools/perf/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoffer Dall <cdall@linaro.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-dd72s6izo4qdzt1isowlz8ji@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools headers: Synchronize drm/i915_drm.hArnaldo Carvalho de Melo
To pick up the changes from these csets: bf64e0b00e1f ("drm/i915: Expand I915_PARAM_HAS_SCHEDULER into a capability bitmask") ac14fbd460d0 ("drm/i915/scheduler: Support user-defined priorities") 822a4b673284 ("drm/i915: Don't use BIT() in UAPI section") 3fd3a6ffe279 ("drm/i915: Simplify i915_reg_read_ioctl") None of them affects how the tools are built, this os done just to silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-d2gor8brpcowe7bcxovjhqwm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools headers uapi: Synchronize drm/drm.hArnaldo Carvalho de Melo
To pick up the new ioctls added in these csets: 3064abfa932b ("drm: Add CRTC_GET_SEQUENCE and CRTC_QUEUE_SEQUENCE ioctls [v3]") 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]") That will be automatically decoded (the ioctl cmd parameter, the structs will be supported when we start using eBPF for that, which is in the works). This silences this warning when building tools/perf: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Keith Packard <keithp@keithp.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-bivwf1pkfmi1ugpswbsxd9e9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools headers: Synchronize perf_event.h headerArnaldo Carvalho de Melo
To get the changes in the 085b30625e39 ("perf/core: Add PERF_AUX_FLAG_COLLISION to report colliding samples") commit, that will be eventually used by perf to handle the ARM SPE architecture. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-178ohv0oy0csq3kzfdk8ky4n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools headers: Synchronize kernel ABI headers wrt SPDX tagsArnaldo Carvalho de Melo
Two more, that were just in perf/core and thus weren't covered by Ingo's latest headers synch, kcmp.h and prctl.h, silencing this: Warning: Kernel ABI header at 'tools/include/uapi/linux/kcmp.h' differs from latest version at 'include/uapi/linux/kcmp.h' Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2a0r7iybyqpkftllyy5t9hfk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28tools/headers: Synchronize kernel x86 UAPI headersIngo Molnar
Two x86 headers got modified in this merge window: arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/disabled-features.h To support x86 UMIP feature, to add new AVX instructions, plus cleanups. None of those changes have an effect on tooling, so do a plain copy. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-28perf intel-pt: Bring instruction decoder files into line with the kernelAdrian Hunter
There are just a few new defines which do not affect perf tools. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/1511253326-22308-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28perf test: Fix test 21 for s390xThomas Richter
Test case 21 (Number of exit events of a simple workload) fails on s390x. The reason is the invalid sample frequency supplied for this test. On s390x the minimum sample frequency is much higher (see output of /proc/service_levels). Supply a save sample frequency value for s390x to fix this. The value will be adjusted by the s390x CPUMF frequency convertion function to a value well below the sysctl kernel.perf_event_max_sample_rate value. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LPU-Reference: 20171123114611.93397-1-tmricht@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-1ynblyhi1n81idpido59nt1y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28perf bench numa: Fixup discontiguous/sparse numa nodesSatheesh Rajendran
Certain systems are designed to have sparse/discontiguous nodes. On such systems, 'perf bench numa' hangs, shows wrong number of nodes and shows values for non-existent nodes. Handle this by only taking nodes that are exposed by kernel to userspace. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-28perf top: Use signal interface for SIGWINCH handlerJiri Olsa
There's no need for SA_SIGINFO data in SIGWINCH handler, switching it to register the handler via signal interface as we do for the rest of the signals in perf top. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-elxp1vdnaog1scaj13cx7cu0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>