| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New driver for changing BIOS settings from within Linux on Dell
devices. This introduces a new generic sysfs API for this. Lenovo
is working on also supporting this API on their devices
- New Intel PMT telemetry and crashlog drivers
- Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid
drivers
- Preparation work for improving support for Microsoft Surface
hardware
- Various fixes / improvements / quirks for the panasonic-laptop and
others"
* tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits)
platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
platform/x86: intel-hid: add Rocket Lake ACPI device ID
x86/platform: classmate-laptop: add WiFi media button
platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
tools/power/x86/intel-speed-select: Update version for v5.11
tools/power/x86/intel-speed-select: Account for missing sysfs for die_id
tools/power/x86/intel-speed-select: Read TRL from mailbox
platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
platform/x86: intel-hid: Add alternative method to enable switches
platform/x86: intel-hid: Add support for SW_TABLET_MODE
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
platform/x86: ISST: Change PCI device macros
platform/x86: ISST: Allow configurable offset range
platform/x86: ISST: Check for unaligned mmio address
acer-wireless: send an EV_SYN/SYN_REPORT between state changes
platform/x86: dell-wmi-sysman: work around for BIOS bug
platform/x86: mlx-platform: remove an unused variable
platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition
platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"The main part of this branch is the ongoing fight against windmills in
an attempt to have userspace tools not poke at naked MSRs.
This round deals with MSR_IA32_ENERGY_PERF_BIAS and removes direct
poking into it by our in-tree tools in favor of the proper
"energy_perf_bias" sysfs interface which we already have.
In addition, the msr.ko write filtering's error message points to a
new summary page which contains the info we collected from helpful
reporters about which userspace tools write MSRs:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about
along with the current status of their conversion.
The rest is the usual small fixes and improvements"
* tag 'x86_misc_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msr: Add a pointer to an URL which contains further details
x86/pci: Fix the function type for check_reserved_t
selftests/x86: Add missing .note.GNU-stack sections
selftests/x86/fsgsbase: Fix GS == 1, 2, and 3 tests
x86/msr: Downgrade unrecognized MSR message
x86/msr: Do not allow writes to MSR_IA32_ENERGY_PERF_BIAS
tools/power/x86_energy_perf_policy: Read energy_perf_bias from sysfs
tools/power/turbostat: Read energy_perf_bias from sysfs
tools/power/cpupower: Read energy_perf_bias from sysfs
MAINTAINERS: Cleanup SGI-related entries
|
|
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Update version for changes released with v5.11 kernel release.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/platform-driver-x86/57d6648282491906e0e1f70fe3b9a44f72cec90d.camel@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some older kernels will not have support to get CPU die_id from the
sysfs. This requires several back ports. But the tool depends on getting
die_id to match to correct CPU.
Relax this restriction and use die_id as 0 when die_id is missing. This
is not a problem as we don't have any multi-die processors with Intel SST
support.
This helps in running this tool on older kernels with just Intel SST
drivers back ported.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/platform-driver-x86/57d6648282491906e0e1f70fe3b9a44f72cec90d.camel@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When SST-PP feature is not present, the TRL (Turbo Ratio Limits)
is read from MSRs. This is done as the mailbox command will fail
on Skylake-X based platform. But for IceLake servers, mailbox
commands can still be used. So add a check to allow for non Skylake
based platforms to read from mail box commands.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/platform-driver-x86/57d6648282491906e0e1f70fe3b9a44f72cec90d.camel@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility update for v5.11-rc1 from Shuah Khan:
"This consists of a change to provide online and offline CPU information.
This change makes it easier to keep track of offline cpus whose cpuidle
or cpufreq property aren't changed when updates are made to online cpus."
* tag 'linux-cpupower-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Provide online and offline CPU information
|
|
- if wakeups occur in s2idle: "freeze time: N (-x ms waking y times) ms"
- change FREEZELOOP and FREEZEWAKE to S2LOOP and S2WAKE for brevity
- returns all sysfs vals to their initial state after testing
- use the dmesg log for debugging until the test is completed,
instrument the executeSuspend process to have a full trace,
if test completes, formal dmesg log overwrites the debug log
- fix CPU_ON and CPU_OFF devices in the timeline, should include [n]
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
... and stop poking at the MSR directly.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201029190259.3476-4-bp@alien8.de
|
|
... instead of poking at the MSR directly.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org
Link: https://lkml.kernel.org/r/20201029190259.3476-3-bp@alien8.de
|
|
... instead of poking at the MSR. For that, move the accessor functions
to misc.c and add a sysfs-writing function too.
There should be no functional changes resulting from this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Renninger <trenn@suse.com>
Link: https://lkml.kernel.org/r/20201029190259.3476-2-bp@alien8.de
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"Update update to version 20.09.30, one kernel side fix"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
powercap: restrict energy meter to root access
tools/power turbostat: harden against cpu hotplug
tools/power turbostat: adjust for temperature offset
tools/power turbostat: Build with _FILE_OFFSET_BITS=64
tools/power turbostat: Support AMD Family 19h
tools/power turbostat: Remove empty columns for Jacobsville
tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz.
tools/power x86_energy_perf_policy: Input/output error in a VM
tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled
tools/power turbostat: Support additional CPU model numbers
tools/power turbostat: Fix output formatting for ACPI CST enumeration
tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY
tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0
tools/power turbostat: Enable accumulate RAPL display
tools/power turbostat: Introduce functions to accumulate RAPL consumption
tools/power turbostat: Make the energy variable to be 64 bit
tools/power turbostat: Always print idle in the system configuration header
tools/power turbostat: Print /dev/cpu_dma_latency
|
|
goodbye summer...
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When a user tries to modify cpuidle or cpufreq properties on offline
CPUs, the tool returns success (exit status 0) but also does not provide
any warning message regarding offline cpus that may have been specified
but left unchanged. In case of all or a few CPUs being offline, it can be
difficult to keep track of which CPUs didn't get the new frequency or idle
state set. Silent failures are difficult to keep track of when there are a
huge number of CPUs on which the action is performed.
This patch adds helper functions to find both online and offline CPUs and
print them out accordingly.
We use these helper functions in cpuidle-set and cpufreq-set to print an
additional message if the user attempts to modify offline cpus.
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
|
|
turbostat tends to get confused when CPUs are added and removed
while it is running.
There are races, such as checking the current cpu, and then
reading a sysfs file that depends on that cpu number.
Close the two issues that seem to come up the most.
First, there is an infinite reset loop detector --
change that to allow more resets before giving up.
Secondly, one of those file reads didn't really need
to exit the program on failure...
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cpu1: MSR_IA32_TEMPERATURE_TARGET: 0x05640000 (95 C) (100 default - 5 offset)
Account for the new "offset" field in MSR_TEMPERATURE_TARGET.
While this field is usually zero, ignoring it results in over-stating
the current temperature, both per-core and per-package.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
* pm-core:
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
* pm-sleep:
PM: sleep: remove unreachable break
* pm-tools:
cpupower: speed up generating git version string
cpupowerutils: fix spelling mistake "dependant" -> "dependent"
* powercap:
powercap: Fix typo in Kconfig "Plance" -> "Plane"
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 5.10-rc1 from Shuah Khan:
"This update consists of minor fixes for spelling and speeding up
generating git version string which will in turn speed up compiles."
* tag 'linux-cpupower-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: speed up generating git version string
cpupowerutils: fix spelling mistake "dependant" -> "dependent"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- a selftests harness fix to flush stdout before forking to avoid
parent and child printing duplicates messages. This is evident when
test output is redirected to a file.
- a tools/ wide change to avoid comma separated statements from Joe
Perches. This fix spans tools/lib, tools/power/cpupower, and
selftests.
* tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Avoid comma separated statements
selftests/harness: Flush stdout before forking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Rather calm cycle for x86 platform drivers, all these have been in
for-next for a couple of days with no bot complaints.
Highlights:
- PMC TigerLake fixes and new RocketLake support
- various small fixes / updates in other drivers/tools"
* tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo
platform/x86: mlx-platform: Add capability field to platform FAN description
platform_data/mlxreg: Extend core platform structure
platform_data/mlxreg: Update module license
platform/x86: mlx-platform: Remove PSU EEPROM configuration
MAINTAINERS: Update maintainers for pmc_core driver
platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info()
platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support
platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize
platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value
platform/x86: intel_pmc_core: Fix TigerLake power gating status map
platform/x86: pmc_core: Use descriptive names for LPM registers
tools/power/x86/intel-speed-select: Update version for v5.10
tools/power/x86/intel-speed-select: Fix missing base-freq core IDs
platform/x86: hp-wmi: add support for thermal policy
|
|
and 'acpi-pci'
* acpi-extlog:
ACPI / extlog: Check for RDMSR failure
* acpi-memhotplug:
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
* acpi-button:
ACPI: button: fix handling lid state changes when input device closed
* acpi-tools:
tools/power/acpi: Serialize Makefile
* acpi-pci:
ACPI: PCI: update kernel-doc line comments
|
|
ACPICA commit 6648a6ac8410813bcfedb5c8345259dd155ea851
Fix spelling issues found using the codespell checker
Link: https://github.com/acpica/acpica/commit/6648a6ac
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Update version for changes released with v5.10 kernel release.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The reported base-freq high-priority-cpu-list was potentially omitting
some cpus, due to incorrectly using a logical core count to constrain
the size of a physical punit core ID mask. We may need to read both high
and low PBF CORE_MASK values regardless of the logical core count.
Signed-off-by: Jonathan Doman <jonathan.doman@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Before this patch you get tools/power/acpi/Makefile.rules
included in parallel trying to copy KERNEL_INCLUDE multiple
times:
make -j20 acpi
DESCEND power/acpi
DESCEND tools/acpidbg
DESCEND tools/acpidump
DESCEND tools/ec
MKDIR include
MKDIR include
MKDIR include
CP include
CP include
cp: cannot create directory '/home/abuild/rpmbuild/BUILD/linux-5.7.7+git20200917.10b82d517648/tools/power/acpi/include/acpi': File exists
make[2]: *** [../../Makefile.rules:20: /home/abuild/rpmbuild/BUILD/linux-5.7.7+git20200917.10b82d517648/tools/power/acpi/include] Error 1
make[1]: *** [Makefile:16: acpidbg] Error 2
make[1]: *** Waiting for unfinished jobs....
with this patch each subdirectory will be processed serialized:
DESCEND power/acpi
DESCEND tools/acpidbg
MKDIR include
CP include
CC tools/acpidbg/acpidbg.o
LD acpidbg
STRIP acpidbg
DESCEND tools/acpidump
CC tools/acpidump/apdump.o
...
LD acpidump
STRIP acpidump
DESCEND tools/ec
CC tools/ec/ec_access.o
LD ec
STRIP ec
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For compatibility reasons, Glibc off_t is a 32-bit type on 32-bit x86
unless _FILE_OFFSET_BITS=64 is defined. Add this define, as otherwise
reading MSRs with index 0x80000000 and above attempts a pread with a
negative offset, which fails.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Family 19h processors have the same RAPL (Running average power limit)
hardware register interface as Family 17h processors.
Change the family checks to succeed for Family 17h and above to enable
core and package energy measurement on Family 19h machines.
Also update the TDP to the largest found at the bottom of the page at
amd.com->processors->servers->epyc->2nd-gen-epyc, i.e., the EPYC 7H12.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Jacobsville doesn't have Package C2 and C6. Also
Core and DRAM RAPL are not available. Adjust output
accordingly.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The column already present called GFXMHz reads from gt_cur_freq_mhz,
which represents the GT frequency that was requested, but power
management might not be able to do that. So the new column will display
what the actual frequency GT is running at.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
I've encountered an issue with x86_energy_perf_policy. If I run it on a
machine that I'm told is a qemu-kvm virtual machine running inside a
privileged container, I get the following error:
x86_energy_perf_policy: /dev/cpu/0/msr offset 0x1ad read failed: Input/output error
I get the same error in a Digital Ocean droplet, so that might be a
similar environment.
I created the following patch which is intended to give a more
user-friendly message. It's based on a patch for turbostat from Prarit
Bhargava that was posted some time ago. The patch is "[v2] turbostat:
Running on virtual machine is not supported" [1].
Given my limited knowledge of the topic, I can't say with confidence
that this is the right solution, though (that's why this is not an
official patch submission). Also, I'm not sure what the convention with
exit codes is in this tool. Also, instead of the error message, perhaps
the tool should just not print anything in this case, which is how it
behaves in a "regular" VM?
[1] https://patchwork.kernel.org/patch/9868587/
Signed-off-by: Ondřej Lysoněk <olysonek@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Like we skip PC3 and PC6 columns when the package C-state limit
disables them, skip PC8/PC9/CP10 under analogous conditions.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Initial support for models recently added to intel-family.h.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat formatting is broken with ACPI CST for enumeration. The
problem is that the CX_ACPI% is eight characters long which does not
work with tab formatting. One simple solution is to remove the underbar
from the state name such that C1_ACPI will be displayed as C1ACPI.
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Disabling cpu 0 results in an error
turbostat: /sys/devices/system/cpu/cpu0/topology/thread_siblings: open failed: No such file or directory
Use sched_getcpu() instead of a hardcoded cpu 0 to get the max cpu number.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Enable the accumulated RAPL display by default.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Since the RAPL Joule Counter is 32 bit, turbostat would
only print a *star* instead of printing the actual energy
consumed to indicate the overflow due to long duration.
This does not meet the requirement from servers as the
sampling time of turbostat is usually very long on servers.
So maintain a set of MSR buffer, and update them
periodically before the 32bit MSR register is wrapped round,
so as to avoid the overflow.
The idea is similar to the implementation of ktime_get():
Periodical MSR timer:
total_rapl_sum += (current_rapl_msr - last_rapl_msr);
Using get_msr_sum() to get the accumulated RAPL:
return (current_rapl_msr - last_rapl_msr) + total_rapl_sum;
The accumulated RAPL mechanism will be turned on in next patch.
Originally-by: Aaron Lu <aaron.lwe@gmail.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Change the energy variable from 32bit to 64bit,
so that it can record long time duration.
After this conversion, adjust the DELTA_WRAP32() accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
If the --quiet option is not used, turbostat prints a useful system
configuration header during startup.
But inclusion of idle system configuration information in this header
is currently a function of inclusion in the columns chosen to be displayed.
Always list this idle system configuration.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Users are puzzled when they use tuned performance and all their
C-states vanish. Dump /dev/cpu_dma_latency and state
whether the value is default, or constraining,
to explain this situation.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The current notifiers have the following error handling pattern all
over the place:
int err, nr;
err = __foo_notifier_call_chain(&chain, val_up, v, -1, &nr);
if (err & NOTIFIER_STOP_MASK)
__foo_notifier_call_chain(&chain, val_down, v, nr-1, NULL)
And aside from the endless repetition thereof, it is broken. Consider
blocking notifiers; both calls take and drop the rwsem, this means
that the notifier list can change in between the two calls, making @nr
meaningless.
Fix this by replacing all the __foo_notifier_call_chain() functions
with foo_notifier_call_chain_robust() that embeds the above pattern,
but ensures it is inside a single lock region.
Note: I switched atomic_notifier_call_chain_robust() to use
the spinlock, since RCU cannot provide the guarantee
required for the recovery.
Note: software_resume() error handling was broken afaict.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200818135804.325626653@infradead.org
|
|
The variable VERSION is expanded for every use of CFLAGS. This causes
"git describe" to get called multiple times on the kernel tree, which
can be quite slow.
The git revision does not change during build, so we can use simple
variable expansion to set VERSION.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
