summaryrefslogtreecommitdiff
path: root/tools/power
AgeCommit message (Collapse)Author
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-16Merge tag 'linux-cpupower-4.20-rc1' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux into pm-tools Pull cpupower utility changes for 4.20 from Shuah Khan: "This cpupower update consists of fixes for bugs and compile warnings from Prarit Bhargava and Anders Roxell." * tag 'linux-cpupower-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: Fix coredump on VMWare cpupower: Fix AMD Family 0x17 msr_pstate size cpupower: remove stringop-truncation waring
2018-10-09PM / tools: sleepgraph and bootgraph: upgrade to v5.2Todd Brandt
bootgraph & sleepgraph: - funnel all prints through the pprint function - remove superfluous print calls, arrange them in single blocks - flush stdout on every print, enables log capture on hang sleepgraph: - in -summary, if all tests have the same host+kernel+mode, add to title - update verbose device detail print to include machine suspend/resume - match tKernSus and tKernRes to pm_prepare/restore_console - fully support multiple suspend/resumes in a single timeline - enable various disk modes (disk-suspend, disk-test_resume, etc) - add warnings when -display (xset) fails Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-09PM / tools: sleepgraph: first batch of v5.2 changesTodd Brandt
general: - add battery charge data before and after test - remove special s0i3 handling - remove melding of dmesg & ftrace data in old kernels, use one only - updates to various kprobes in trace (ksys_sync, etc) - enable pm_debug_messages during the test - instrument more subsystems with dev functions (phy0) error handling: - return codes for tool show the status of the test run - 0: success, 1: general error (no timeline), 2: fail (suspend aborted) - monitor output of /sys/power/state, mark as failure if exception occurs - add signal handler when using -result to catch tool exceptions display control - add -x commands for testing xset with mode settings and status - allow display setting to on, off, suspend, standby - add display mode change info to the log, along with a warning on fail s2idle (freeze) - remove fixed 10-phase dependency, allow any phase order & any count - multiple phase occurences show as phase_nameN e.g. suspend_noirq3 - if multiple freezes occur, print multiple time values in header summary: - add new columns to summary output: issues, worst suspend/resume devices - worst device: includes summation of all phases of suspend or resume - issues: includes WARNING/ERROR/BUG from dmesg log, and other issues - s2idle: multiple freezes show as FREEZExN in the issues column Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08cpupower: Fix coredump on VMWarePrarit Bhargava
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR (0xC0010064 + state number) set to zero. As a result fid and did are zero and the crash occurs because of a divide by zero (cof = fid/did). This can be prevented by checking the enable bit in the PStateDef MSR before calculating cof. By doing this the value of pstate[i] remains zero and the value can be tested before displaying the active Pstates. Check the enable bit in the PstateDef register for all supported families and only print out enabled Pstates. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-08cpupower: Fix AMD Family 0x17 msr_pstate sizePrarit Bhargava
The msr_pstate data is only 63 bits long and should be 64 bits. Add in the missing bit from res1 for AMD Family 0x17. Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-04tools/cpupower: Add Hygon Dhyana supportPu Wen
The tool cpupower is useful to get CPU frequency information and monitor power stats on the Hygon Dhyana platform. So add Hygon Dhyana support to it by checking vendor and family to share the code path of AMD family 17h. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> CC: Prarit Bhargava <prarit@redhat.com> CC: Shuah Khan <shuah@kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Thomas Renninger <trenn@suse.com> CC: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-08-28cpupower: remove stringop-truncation waringAnders Roxell
The strncpy doesn't null terminate the string because the size is too short by one byte. parse.c: In function ‘prepare_default_config’: parse.c:148:2: warning: ‘strncpy’ output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] strncpy(config->governor, "ondemand", 8); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The normal method of passing the length of the destination buffer works correctly here. Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-29Merge branch 'turbostat' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility fixes for 4.18 from Len Brown: "Three of them are for regressions since Linux-4.17" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
2018-07-27tools/power turbostat: version 18.07.27Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2018-07-27tools/power turbostat: Read extended processor family from CPUIDCalvin Walton
This fixes the reported family on modern AMD processors (e.g. Ryzen, which is family 0x17). Previously these processors all showed up as family 0xf. See the document https://support.amd.com/TechDocs/56255_OSRR.pdf section CPUID_Fn00000001_EAX for how to calculate the family from the BaseFamily and ExtFamily values. This matches the code in arch/x86/lib/cpu.c Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by: Len Brown <len.brown@intel.com>
2018-07-26tools/power turbostat: Fix logical node enumeration to allow for ↵Prarit Bhargava
non-sequential physical nodes turbostat fails on some multi-package topologies because the logical node enumeration assumes that the nodes are sequentially numbered, which causes the logical numa nodes to not be enumerated, or enumerated incorrectly. Use a more robust enumeration algorithm which allows for non-seqential physical nodes. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-07-26tools/power turbostat: fix x2apic debug message output fileLen Brown
A recently added x2apic debug message was hard-coded to stderr. That doesn't work with "-o outfile". Signed-off-by: Len Brown <len.brown@intel.com>
2018-07-26tools/power turbostat: fix bogus summary valuesArtem Bityutskiy
This patch fixes a regression introduced in commit 8cb48b32a5de ("tools/power turbostat: track thread ID in cpu_topology") Turbostat uses incorrect cores number ('topo.num_cores') - its value is count of logical CPUs, instead of count of physical cores. So it is twice as large as it should be on a typical Intel system. For example, on a 6 core Xeon system 'topo.num_cores' is 12, and on a 52 core Xeon system 'topo.num_cores' is 104. And interestingly, on a 68-core Knights Landing Intel system 'topo.num_cores' is 272, because this system has 4 logical CPUs per core. As a result, some of the turbostat calculations are incorrect. For example, on idle 52-core Xeon system when all cores are ~99% in Core C6 (CPU%c6), the summary (very first) line shows ~48% Core C6, while it should be ~99%. This patch fixes the problem by fixing 'topo.num_cores' calculation. Was: 1. Init 'thread_id' for all CPUs to -1 2. Run 'get_thread_siblings()' which sets it to 0 or 1 3. Increment 'topo.num_cores' when thread_id != -1 (bug!) Now: 1. Init 'thread_id' for all CPUs to -1 2. Run 'get_thread_siblings()' which sets it to 0 or 1 3. Increment 'topo.num_cores' when thread_id is not 0 I did not have a chance to test this on an AMD machine, and only tested on a couple of Intel Xeons (6 and 52 cores). Reported-by: Vladislav Govtva <vladislav.govtva@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-07-20tools/power turbostat: fix -S on UP systemsLen Brown
The -S (system summary) option failed to print any data on a 1-processor system. Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-07-17tools/power turbostat: Update turbostat(8) RAPL throttling column descriptionLen Brown
Explain that this column may increment for some throttling causes, and may not increment for others. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-21Merge branch 'turbostat' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility changes for 4.18-rc2 from Len Brown. "This includes two regression fixes, plus a couple more random, but worthy, patches." * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 18.06.20 tools/power turbostat: add the missing command line switches tools/power turbostat: add single character tokens to help tools/power turbostat: alphabetize the help output tools/power turbostat: fix segfault on 'no node' machines tools/power turbostat: add optional APIC X2APIC columns tools/power turbostat: decode cpuid.1.HT tools/power turbostat: fix show/hide issues resulting from mis-merge
2018-06-20tools/power turbostat: version 18.06.20Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: add the missing command line switchesNathan Ciobanu
Document the missing command line tokens in the help() function. Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: add single character tokens to helpNathan Ciobanu
Improve the help() output by adding the single character tokens (e.g -a). Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: alphabetize the help outputNathan Ciobanu
Sort the command line arguments output of help() in alphabetical order in line with other linux tools. Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: fix segfault on 'no node' machinesNathan Ciobanu
Running turbostat on machines that don't expose nodes in sysfs (no /sys/bus/node) causes a segfault or a -nan value diesplayed in the log. This is caused by physical_node_id being reported as -1 and logical_node_id being calculated as a negative number resulting in the new GET_THREAD/GET_CORE returning an incorrect address. Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: add optional APIC X2APIC columnsLen Brown
Add APIC and X2APIC columns to the topology section. They are disabled-by-default -- enable like so: --debug or --enable APIC,X2APIC Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: decode cpuid.1.HTLen Brown
eg. the "HT" here: CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: fix show/hide issues resulting from mis-mergeLen Brown
The --show and --hide options failed on "Node", which was listed as "Node%". The --show and --hide options were generally fouled-up do due to come content merges that scrambled the list of column name indexes. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-06Merge tag 'linux-cpupower-4.18-rc1' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower updates for v4.18-rc1 from Shuah Khan: "This cpupower update for 4.18-rc1 consists of two minor fixes." * tag 'linux-cpupower-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower : Fix header name to read idle state name cpupower: fix spelling mistake: "logilename" -> "logfilename"
2018-06-03Merge back earlier PM tools material for v4.18.Rafael J. Wysocki
2018-06-01tools/power turbostat: update version numberLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Add Node in outputPrarit Bhargava
Output a Node column if there is more than one node/socket. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: add node information into turbostat calculationsPrarit Bhargava
The previous patches have added node information to turbostat, but the counters code does not take it into account. Add node information from cpu_topology calculations to turbostat counters. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: remove num_ from cpu_topology structPrarit Bhargava
Cleanup, remove num_ from num_nodes_per_pkg, num_cores_per_node, and num_threads_per_node. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: rename num_cores_per_pkg to num_cores_per_nodePrarit Bhargava
turbostat incorrectly assumes that there is one node per package. As a result num_cores_per_pkg is not correctly named and is actually num_cores_per_node. Rename num_cores_per_pkg to num_cores_per_node. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: track thread ID in cpu_topologyPrarit Bhargava
The code can be simplified if the cpu_topology *cpus tracks the thread IDs. This removes an additional file lookup and simplifies the counter initialization code. Add thread ID to cpu_topology information and cleanup the counter initialization code. v2: prevent thread_id from being overwritten Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Calculate additional node information for a packagePrarit Bhargava
The code currently assumes each package has exactly one node. This is not the case for AMD systems and Intel systems with COD. AMD systems also may re-enumerate each node's core IDs starting at 0 (for example, an AMD processor may have two nodes, each with core IDs from 0 to 7). In order to properly enumerate the cores we need to track both the physical and logical node IDs. Add physical_node_id to track the node ID assigned by the kernel, and logical_node_id used by turbostat to track the nodes per package ie) a 0-based count within the package. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Fix node and siblings lookup dataLen Brown
The turbostat code only looks at thread_siblings_list to determine if processing units/threads are on the same the core. This works well on Intel systems which have a shared L1 instruction and data cache. This does not work on AMD systems which have shared L1 instruction cache but separate L1 data caches. Other utilities also check sibling's core ID to determine if the processing unit shares the same core. Additionally, the cpu_topology *cpus list used in topology_probe() can be used elsewhere in the code to simplify things. Export *cpus to the entire turbostat code, and add Processing Unit/Thread IDs information to each cpu_topology struct. Confirm that the thread is on the same core as indicated by thread_siblings_list. [v2]: Fixup CPU_* usage that caused gcc malloc error. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: set max_num_cpus equal to the cpumask lengthPrarit Bhargava
Future fixes will use sysfs files that contain cpumask output. The code needs to know the length of the cpumask in order to determine which cpus are set in a cpumask. Currently topo.max_cpu_num is the maximum cpu number. It can be increased the the maximum value of cpus represented in cpumasks. Set max_num_cpus to the length of a cpumask. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: if --num_iterations, print for specific number of ↵Chen Yu
iterations There's a use case during test to only print specific round of iterations if --num_iterations is specified, for example, with this patch applied: turbostat -i 5 -n 4 will capture 4 samples with 5 seconds interval. [lenb: renamed to --num_iterations from --iterations] Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Add Cannon Lake supportSrinivas Pandruvada
All MSRs related to turbostat are same as Kabylake. Even though SDM claims that core C3 residency can be read from MSR 0x662, the read on this MSR fails on CNL platform. Hence disabled C3 MSR read and display. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: delete duplicate #definesLen Brown
The SNB_C1_AUTO_UNDEMOTE definition should have been deleted once it was copied into msr-index.h. One copy of the truth is better -- particularly when Matt needs to fix it:-) Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE definesMatt Turner
According to the Intel Software Developers' Manual, Vol. 4, Order No. 335592, these macros have been reversed since they were added. Fixes: 889facbee3e6 ("tools/power turbostat: v3.0: monitor Watts and Temperature") Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: add POLL and POLL% columnLen Brown
Like the "C1" and "C1%" column, the new POLL and POLL% columns show invocations and residency% during the measurement interval. While it didn't seem important to track in the past, we've recently found some Linux cpuidle bugs related to POLL%. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Fix --hide Pk%pc10Len Brown
The column header for PC10 residency is "Pk%pc10" This is missing the 'g' that others have, eg Pkg%pc6, to allow tab-delimited columns to fit into 8-columns. However, --hide Pk%pc10 did not work, it was still looking for the 'g'. This was confusing, because --list shows the correct "Pk%pc10" Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Build-in "Low Power Idle" counters supportLen Brown
Linux 4.15 exports the ACPI Low Power Idle Table's counters in /sys/devices/system/cpu/cpuidle/ low_power_idle_cpu_residency_us Show this in the "CPU%LPI" column. Today this reflects the "North Complex" residency in PC10, so expect it to closely follow "Pk%pc10". low_power_idle_system_residency_us Show this in the "SYS%LPI" column. Today, this reflects the North is in PC10, plus the PCH is sufficiently quiescent to save additional power via the "S0ix" system state, as measured by the PCH SLP_S0 counter. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Don't make man pages executableLaura Abbott
rpm-lint flagged these as being executable: kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/turbostat.8.gz kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/x86_energy_perf_policy.8.gz Fix this Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: remove blank linesLen Brown
When the user reuests to collect and show columns that are not present on every row (eg. for every CPU) turbostat still prints an (empty) line for every CPU. Update so no blank lines are printed. old: # turbostat --quiet --show Pkg%pc6 Pkg%pc6 9.12 9.12 Pkg%pc6 9.12 9.12 new: # turbostat --quiet --show Pkg%pc6 Pkg%pc6 9.12 9.12 Pkg%pc6 9.12 9.12 Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: a small C-states dump readability immprovementArtem Bityutskiy
Improve readability a little bit by changing this output: MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked: pkg-cstate-limit=7: unlimited, automatic-c-state-conversion=off) with this output: MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked, pkg-cstate-limit=7 (unlimited), automatic-c-state-conversion=off) Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 21:32:00 +0000