summaryrefslogtreecommitdiff
path: root/tools/power/cpupower
AgeCommit message (Collapse)Author
2018-12-05cpupower : Auto-completion for cpupower toolAbhishek Goel
This script adds support for auto-completion for cpupower tool. Added support for auto-completion of all the eight commands for cpupower tool and their all subsequent sub-commands, wherever possible. A sample output after applying this script - root@ubuntu:~# cpupower f<TAB> root@ubuntu:~# cpupower frequency-<TAB> frequency-info frequency-set root@ubuntu:~# cpupower frequency-set - -d --freq --governor --min --related -f -g --max -r -u root@ubuntu:~# cpupower frequency-set -g <TAB> conservative ondemand performance powersave schedutil userspace root@ubuntu:~# cpupower frequency-set -f <TAB> 2061000 2194000 2327000 2460000 2593000 2726000 2859000 2094000 2227000 2360000 2493000 2626000 2759000 2892000 2128000 2261000 2394000 2527000 2660000 2793000 2926000 2161000 2294000 2427000 2560000 2693000 2826000 2959000 root@ubuntu:~# cpupower frequency-set -f 206<TAB> root@ubuntu:~# cpupower frequency-set -f 2061000 Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Bharath Thodla <bharath.thodla@in.ibm.com> Tested-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-11-06tools cpupower: Override CFLAGS assignmentsJiri Olsa
So user could specify outside CFLAGS values. Cc: Thomas Renninger <trenn@suse.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-11-06tools cpupower debug: Allow to use outside build flagsJiri Olsa
Adding CFLAGS and LDFLAGS to be used during the build. Cc: Thomas Renninger <trenn@suse.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-11-06tools/power/cpupower: fix compilation with STATIC=trueKonstantin Khlebnikov
Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Thomas Renninger <trenn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-08cpupower: Fix coredump on VMWarePrarit Bhargava
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR (0xC0010064 + state number) set to zero. As a result fid and did are zero and the crash occurs because of a divide by zero (cof = fid/did). This can be prevented by checking the enable bit in the PStateDef MSR before calculating cof. By doing this the value of pstate[i] remains zero and the value can be tested before displaying the active Pstates. Check the enable bit in the PstateDef register for all supported families and only print out enabled Pstates. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-08cpupower: Fix AMD Family 0x17 msr_pstate sizePrarit Bhargava
The msr_pstate data is only 63 bits long and should be 64 bits. Add in the missing bit from res1 for AMD Family 0x17. Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-04tools/cpupower: Add Hygon Dhyana supportPu Wen
The tool cpupower is useful to get CPU frequency information and monitor power stats on the Hygon Dhyana platform. So add Hygon Dhyana support to it by checking vendor and family to share the code path of AMD family 17h. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> CC: Prarit Bhargava <prarit@redhat.com> CC: Shuah Khan <shuah@kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Thomas Renninger <trenn@suse.com> CC: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
2018-08-28cpupower: remove stringop-truncation waringAnders Roxell
The strncpy doesn't null terminate the string because the size is too short by one byte. parse.c: In function ‘prepare_default_config’: parse.c:148:2: warning: ‘strncpy’ output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] strncpy(config->governor, "ondemand", 8); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The normal method of passing the length of the destination buffer works correctly here. Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-29cpupower : Fix header name to read idle state nameAbhishek Goel
The names of the idle states in the output of cpupower monitor command are truncated to 4 characters. On POWER9, this creates ambiguity as the states are named "stop0", "stop1", etc. root:~# cpupower monitor |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop 0| 0| 0| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 1.90 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 This patch modifies the output to print the state name that results in a legible output. The names will be printed with atmost 1 padding in left. root:~# cpupower monitor | Idle_Stats PKG|CORE| CPU|snooze|stop0L| stop0|stop1L| stop1|stop2L| stop2 0| 0| 0| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.72 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 This patch does not affect the output for intel. Output for intel before applying the patch: root:~# cpupower monitor |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S | C9-S | C10- 0| 0.00| 0.14| 0.39| 0.35| 7.41| 0.00| 17.67| 1.01| 70.03 2| 0.00| 0.19| 0.47| 0.10| 6.50| 0.00| 29.66| 2.17| 58.07 1| 0.00| 0.11| 0.50| 1.50| 9.11| 0.18| 18.19| 0.40| 66.63 3| 0.00| 0.67| 0.42| 0.03| 5.84| 0.00| 12.58| 0.77| 77.14 Output for intel after applying the patch: root:~# cpupower monitor | Idle_Stats CPU| POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S | C9-S | C10- 0| 0.03| 0.33| 1.01| 0.27| 3.03| 0.00| 19.18| 0.00| 71.24 2| 0.00| 1.58| 0.58| 0.42| 8.55| 0.09| 21.11| 0.99| 63.32 1| 0.00| 1.26| 0.88| 0.43| 9.00| 0.02| 7.78| 4.65| 71.91 3| 0.00| 0.30| 0.42| 0.06| 13.62| 0.21| 30.29| 0.00| 52.45 Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-05-10cpupower: fix spelling mistake: "logilename" -> "logfilename"Colin Ian King
Trivial fix to spelling mistake in dprintf message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2017-12-15cpupower: Remove FSF addressLaura Abbott
Checkpatch in the kernel now complains about having the FSF address in comments. Other tools such as rpmlint are now starting to do the same thing. Remove the FSF address to reduce warnings on multiple tools. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-30Merge tag 'pm-4.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: - add missing module information to the Mediatek cpufreq driver module (Jesse Chan) - fix config dependencies for the Loongson cpufreq driver (James Hogan) - fix two issues related to CPU offline in the cpupower utility (Abhishek Goel). * tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE cpufreq: Add Loongson machine dependencies cpupower : Fix cpupower working when cpu0 is offline cpupowerutils: bench - Fix cpu online check
2017-11-18Merge tag 'linux-cpupower-4.15-rc2' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility fixes for 4.15-rc2 from Shuah Khan: "This update consists of fixes to tool's handling of offline cpus. The first patch fixes the tool to find information on the cpu it is running on, instead of always looking for cpu0 and failing if cpu0 happens to be offline. The second patch fixes the incorrect check for offline cpu status." * tag 'linux-cpupower-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower : Fix cpupower working when cpu0 is offline cpupowerutils: bench - Fix cpu online check
2017-11-18kbuild: /bin/pwd -> pwdBjørn Forsman
Most places use pwd and rely on $PATH lookup. Moving the remaining absolute path /bin/pwd users over for consistency. Also, a reason for doing /bin/pwd -> pwd instead of the other way around is because I believe build systems should make little assumptions on host filesystem layout. Case in point, we do this kind of patching already in NixOS. Ref. commit 028568d84da3cfca49f5f846eeeef01441d70451 ("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)"). Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-15cpupower : Fix cpupower working when cpu0 is offlineAbhishek Goel
cpuidle_monitor used to assume that cpu0 is always online which is not a valid assumption on POWER machines. This patch fixes this by getting the cpu on which the current thread is running, instead of always using cpu0 for monitoring which may not be online. Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-15cpupowerutils: bench - Fix cpu online checkAbhishek Goel
cpupower_is_cpu_online was incorrectly checking for 0. This patch fixes this by checking for 1 when the cpu is online. Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-13Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Define the constant governor name PM / devfreq: Remove unneeded conditional statement PM / devfreq: Show the all available frequencies PM / devfreq: Change return type of devfreq_set_freq_table() PM / devfreq: Use the available min/max frequency Revert "PM / devfreq: Add show_one macro to delete the duplicate code" PM / devfreq: Set min/max_freq when adding the devfreq device * pm-tools: tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore tools/power/cpupower: Add 64 bit library detection MAINTAINERS: add maintainer for tools/power/cpupower cpupower: Fix no-rounding MHz frequency output
2017-11-09tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignorePrarit Bhargava
Commit ac5a181d065d ("cpupower: Add cpuidle parts into library") added libcpupower.so.0.0.1 which should be hidden from git commands. This patch changes the ignore to all libcpupower.so.* . Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-09tools/power/cpupower: Add 64 bit library detectionPrarit Bhargava
The kernel-tools-lib rpm is installing the library to /usr/lib64, and not /usr/lib as the cpupower Makefile is doing in the kernel tree. This resulted in a conflict between the two libraries. After looking at how other tools installed libraries, and looking at the perf code in tools/perf it looks like installing to /usr/lib64 for 64-bit arches is the correct thing to do. Checks with 'ldd cpupower' on SLES, RHEL, Fedora, and Ubuntu result in the correct binary AFAICT: [root@testsystem cpupower]# ldd cpupower | grep cpupower libcpupower.so.0 => /lib64/libcpupower.so.0 (0x00007f1dab447000) Commit ac5a181d065d ("cpupower: Add cpuidle parts into library") added a new cpupower library version. On Fedora, executing the cpupower binary then resulted in this error [root@testsystem cpupower]# ./cpupower monitor ./cpupower: symbol lookup error: ./cpupower: undefined symbol: get_cpu_topology 64-bit libraries should be installed to /usr/lib64, and other libraries should be installed to /usr/lib. This code was taken from the perf Makefile.config which supports /usr/lib and /usr/lib64. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-03cpupower: Fix no-rounding MHz frequency outputPrarit Bhargava
'cpupower frequency-info -ln' returns kHz values on systems with MHz range minimum CPU frequency range. For example, on a 800MHz to 4.20GHz system the command returns hardware limits: 800000 MHz - 4.200000 GHz The code that causes this error can be removed. The next else if clause will handle the output correctly such that hardware limits: 800.000 MHz - 4.200000 GHz is displayed correctly. [v2]: Remove two lines instead of fixing broken code. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Renninger <trenn@suse.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-07kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)Masahiro Yamada
I thought commit 8e9b46679923 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)") was a safe conversion, but it changed the behavior. $(abspath ...) / $(realpath ...) does not expand shell special characters, such as '~'. Here is a simple Makefile example: ---------------->8---------------- $(info /bin/pwd: $(shell cd ~/; /bin/pwd)) $(info abspath: $(abspath ~/)) $(info realpath: $(realpath ~/)) all: @: ---------------->8---------------- $ make /bin/pwd: /home/masahiro abspath: /home/masahiro/workspace/~ realpath: This can be a real problem if 'make O=~/foo' is invoked from another Makefile or primitive shell like dash. This commit partially reverts 8e9b46679923. Fixes: 8e9b46679923 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Julien Grall <julien.grall@arm.com>
2017-09-14Merge tag 'kbuild-v4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use Make-builtin $(abspath ...) helper to get absolute path - Add W=2 extra warning option to detect unused macros - Use more KCONFIG_CONFIG instead hard-coded .config - Fix bugs of tar*-pkg targets * tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: buildtar: do not print successful message if tar returns error kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled kbuild: Use KCONFIG_CONFIG in buildtar Kbuild: enable -Wunused-macros warning for "make W=2" kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
2017-09-01kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)Masahiro Yamada
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get the absolute path of the directory because GNU Make 3.80, the minimal supported version at that time, did not support $(abspath ...) or $(realpath ...). Commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81") dropped the GNU Make 3.80 support, so we are now allowed to use those make-builtin helpers. This conversion will provide better portability without relying on the pwd command or its location /bin/pwd. I am intentionally using $(realpath ...) instead $(abspath ...) in some places. The difference between the two is $(realpath ...) returns an empty string if the given path does not exist. It is convenient in places where we need to error-out if the makefile fails to create an output directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com>
2017-07-31tools/power/cpupower: allow running without cpu0Prarit Bhargava
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0, allowing systems to offline cpu0. But when cpu0 is offline, cpupower monitor will not display all processor and Mperf information: [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13 1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26 5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50 2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84 6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00 3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99 7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70 This patch replaces the hard-coded use of cpu0 in cpupower with the current cpu, allowing it to run without a cpu0. After the patch is applied, [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Nehalem || Mperf || Idle_Stats CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52 1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88 5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50 2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00 6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99 3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13 7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57 There are some minor cleanups included in this patch. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Add support for new AMD family 0x17Sherry Hurwitz
Add support for new AMD family 0x17 - Add bit field changes to the msr_pstate structure - Add the new formula for the calculation of cof - Changed method to access to CpbDis Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Acked-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Fix bug where return value was not usedSherry Hurwitz
Save return value from amd_pci_get_num_boost_states and remove redundant setting of *support Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13cpupower: Fix turbo frequency reporting for pre-Sandy Bridge coresBen Hutchings
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-19cpupower: Restore format of frequency-info limitStafford Horne
The intel_pstate kselftest expects that the output of `cpupower frequency-info -l | tail -1 | awk ' { print $1 } '` to get frequency limits. This does not work after the following two changes. - 562e5f1a3: rework the "cpupower frequency-info" command (Jacob Tanenbaum) removed parsable limit output - ce512b840: Do not analyse offlined cpus (Thomas Renninger) added newline to break limit parsing more This change preserves human readable output if wanted as well as parsable output for scripts/tests. Cc: Thomas Renninger <trenn@suse.com> Cc: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-12-17Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-11make use of make variable CURDIR instead of calling pwdUwe Kleine-König
make already provides the current working directory in a variable, so make use of it instead of forking a shell. Also replace usage of PWD by CURDIR. PWD is provided by most shells, but not all, so this makes the build system more robust. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-11-01cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-setLaura Abbott
When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward <jseward@acm.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Thomas Renninger <trenn@suse.com> Cc: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05cpupower: fix potential memory leakArjun Sreedharan
Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28cpupower: Add cpuidle parts into libraryThomas Renninger
This more or less is a renaming and moving of functions and should not introduce any functional change. cpupower was built from cpufrequtils (which had a C library providing easy access to cpu frequency platform info). In the meantime it got enhanced by quite some neat cpuidle userspace tools. Now the cpu idle functions have been separated and added to the cpupower.so library. So beside an already existing public header file: cpufreq.h cpupower now also exports these cpu idle functions in: cpuidle.h Here again pasted for better review of the interfaces: ====================================== int cpuidle_is_state_disabled(unsigned int cpu, unsigned int idlestate); int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate, unsigned int disable); unsigned long cpuidle_state_latency(unsigned int cpu, unsigned int idlestate); unsigned long cpuidle_state_usage(unsigned int cpu, unsigned int idlestate); unsigned long long cpuidle_state_time(unsigned int cpu, unsigned int idlestate); char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate); char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate); unsigned int cpuidle_state_count(unsigned int cpu); char *cpuidle_get_governor(void); char *cpuidle_get_driver(void); ====================================== Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28cpupowerutils: bench: trivial fix of spelling mistake on "average"Colin Ian King
fix spelling mistake, avarage -> average Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28Fix cpupower manpages "NAME" sectionMattia Dongili
The token before "-" should be the program name, no spaces allowed. See man(7) and lexgrog(1). Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28cpupower: bench: parse.c: fix several resource leaksColin Ian King
The error handling in prepare_output has several issues with resource leaks. Ensure that filename is free'd and the directory stream DIR is closed before returning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28Honour user's LDFLAGSMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-19cpupower: Fix build error in cpufreq-infoShreyas B. Prabhu
Fix the following build error by including limits.h - utils/cpufreq-info.c: In function ‘get_latency’: utils/cpufreq-info.c:437:29: error: ‘UINT_MAX’ undeclared (first use in this function) if (!latency || latency == UINT_MAX) { ^ Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Fixes: e98f033f94f3 (cpupower: fix how "cpupower frequency-info" interprets latency) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: fix how "cpupower frequency-info" interprets latencyJacob Tanenbaum
the intel-pstate driver does not support the ondemand governor and does not have a valid value in /sys/devices/system/cpu/cpu[x]/cpufreq/cpuinfo_transition_latency. The intel-pstate driver sets cpuinfo_transition_latency to CPUFREQ_ETERNAL (-1), the value written into cpuinfo_transition_latency is defind as an unsigned int so checking the read value against max unsigned int will determine if the value is valid. Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: rework the "cpupower frequency-info" commandJacob Tanenbaum
this patch makes two changes to the way that "cpupower frequancy-info" operates 1. make it so that querying individual values always returns a message to the user currently cpupower frequency info doesn't return anything to the user when querying an individual value cannot be returned [root@amd-dinar-09 cpupower]# cpupower -c 4 frequency-info -d analyzing CPU 4: [root@amd-dinar-09 cpupower]# I added messages so that each query prints a message to the terminal [root@amd-dinar-09 cpupower]# ./cpupower -c 4 frequency-info -d analyzing CPU 4: no or unknown cpufreq driver is active on this CPU [root@amd-dinar-09 cpupower]# (this is just one example) 2. change debug_output_one() to use the functions already provided by cpufreq-info.c to query individual values of interest. Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: Do not analyse offlined cpusThomas Renninger
Use sysfs_is_cpu_online(cpu) instead of cpufreq_cpu_exists(cpu) to detect offlined cpus. Re-arrange printfs slightly to have a consistent output even if you have multiple CPUs as output and even if offlined cores are in between. Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: Provide STATIC variable in Makefile for debug buildsThomas Renninger
When working on cpupower code, you often want to compile library code into the binary. This allows to execute modified cpupower code, even with library changes without doing "make install" Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: Fix precedence issueThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02Creating a common structure initialization pattern for struct optionSriram Raghunathan
This patch tries to creates a common structure initialization within the cpupower tool. Previously the ``struct option`` was initialized using `designated initializer` technique which was not needed. There were conflicting initialization methods seen with bench/main.c & others. Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02cpupower: Enable disabled Cstates if they are below max latencyThomas Renninger
cpupower idle-set -D <latency> currently only disables all C-states that have a higher latency than the specified <latency>. But if deep sleep states were already disabled and have a lower latency, they should get enabled again. For example: This call: cpupower idle-set -D 30 disables all C-states with a higher or equal latency than 30. If one then calls: cpupower idle-set -D 100 C-states with a latency between 30-99 will get enabled again with this patch now. It is ensured that only C-states with a latency of 100 and higher are disabled. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02cpupower: Remove debug message when using cpupower idle-set -D switchThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 16:11:58 +0000