summaryrefslogtreecommitdiff
path: root/tools/power/cpupower/utils
AgeCommit message (Collapse)Author
2019-06-04cpupower : frequency-set -r option misses the last cpu in related cpu listAbhishek Goel
To set frequency on specific cpus using cpupower, following syntax can be used : cpupower -c #i frequency-set -f #f -r While setting frequency using cpupower frequency-set command, if we use '-r' option, it is expected to set frequency for all cpus related to cpu #i. But it is observed to be missing the last cpu in related cpu list. This patch fixes the problem. Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the terms of the gnu gpl license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 62 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13tools/power/cpupower: Display boost frequency separatelyAbhishek Goel
cpufreq driver creates sysfs file "scaling_boost_frequency" for platforms which support boost frequency. Cpupower now prints boost frequencies separately. For few x86 vendors who already have different way to get boost frequency, will continue to use the existing logic. Rest of the platforms will rely on "scaling_boost_frequency" file to display boost frequency. Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-08cpupower: Fix coredump on VMWarePrarit Bhargava
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR (0xC0010064 + state number) set to zero. As a result fid and did are zero and the crash occurs because of a divide by zero (cof = fid/did). This can be prevented by checking the enable bit in the PStateDef MSR before calculating cof. By doing this the value of pstate[i] remains zero and the value can be tested before displaying the active Pstates. Check the enable bit in the PstateDef register for all supported families and only print out enabled Pstates. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-08cpupower: Fix AMD Family 0x17 msr_pstate sizePrarit Bhargava
The msr_pstate data is only 63 bits long and should be 64 bits. Add in the missing bit from res1 for AMD Family 0x17. Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-10-04tools/cpupower: Add Hygon Dhyana supportPu Wen
The tool cpupower is useful to get CPU frequency information and monitor power stats on the Hygon Dhyana platform. So add Hygon Dhyana support to it by checking vendor and family to share the code path of AMD family 17h. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> CC: Prarit Bhargava <prarit@redhat.com> CC: Shuah Khan <shuah@kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Thomas Renninger <trenn@suse.com> CC: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
2018-05-29cpupower : Fix header name to read idle state nameAbhishek Goel
The names of the idle states in the output of cpupower monitor command are truncated to 4 characters. On POWER9, this creates ambiguity as the states are named "stop0", "stop1", etc. root:~# cpupower monitor |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop 0| 0| 0| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 1.90 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 This patch modifies the output to print the state name that results in a legible output. The names will be printed with atmost 1 padding in left. root:~# cpupower monitor | Idle_Stats PKG|CORE| CPU|snooze|stop0L| stop0|stop1L| stop1|stop2L| stop2 0| 0| 0| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.72 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 This patch does not affect the output for intel. Output for intel before applying the patch: root:~# cpupower monitor |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S | C9-S | C10- 0| 0.00| 0.14| 0.39| 0.35| 7.41| 0.00| 17.67| 1.01| 70.03 2| 0.00| 0.19| 0.47| 0.10| 6.50| 0.00| 29.66| 2.17| 58.07 1| 0.00| 0.11| 0.50| 1.50| 9.11| 0.18| 18.19| 0.40| 66.63 3| 0.00| 0.67| 0.42| 0.03| 5.84| 0.00| 12.58| 0.77| 77.14 Output for intel after applying the patch: root:~# cpupower monitor | Idle_Stats CPU| POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S | C9-S | C10- 0| 0.03| 0.33| 1.01| 0.27| 3.03| 0.00| 19.18| 0.00| 71.24 2| 0.00| 1.58| 0.58| 0.42| 8.55| 0.09| 21.11| 0.99| 63.32 1| 0.00| 1.26| 0.88| 0.43| 9.00| 0.02| 7.78| 4.65| 71.91 3| 0.00| 0.30| 0.42| 0.06| 13.62| 0.21| 30.29| 0.00| 52.45 Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2017-11-18Merge tag 'linux-cpupower-4.15-rc2' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility fixes for 4.15-rc2 from Shuah Khan: "This update consists of fixes to tool's handling of offline cpus. The first patch fixes the tool to find information on the cpu it is running on, instead of always looking for cpu0 and failing if cpu0 happens to be offline. The second patch fixes the incorrect check for offline cpu status." * tag 'linux-cpupower-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower : Fix cpupower working when cpu0 is offline cpupowerutils: bench - Fix cpu online check
2017-11-15cpupower : Fix cpupower working when cpu0 is offlineAbhishek Goel
cpuidle_monitor used to assume that cpu0 is always online which is not a valid assumption on POWER machines. This patch fixes this by getting the cpu on which the current thread is running, instead of always using cpu0 for monitoring which may not be online. Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-13Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Define the constant governor name PM / devfreq: Remove unneeded conditional statement PM / devfreq: Show the all available frequencies PM / devfreq: Change return type of devfreq_set_freq_table() PM / devfreq: Use the available min/max frequency Revert "PM / devfreq: Add show_one macro to delete the duplicate code" PM / devfreq: Set min/max_freq when adding the devfreq device * pm-tools: tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore tools/power/cpupower: Add 64 bit library detection MAINTAINERS: add maintainer for tools/power/cpupower cpupower: Fix no-rounding MHz frequency output
2017-11-03cpupower: Fix no-rounding MHz frequency outputPrarit Bhargava
'cpupower frequency-info -ln' returns kHz values on systems with MHz range minimum CPU frequency range. For example, on a 800MHz to 4.20GHz system the command returns hardware limits: 800000 MHz - 4.200000 GHz The code that causes this error can be removed. The next else if clause will handle the output correctly such that hardware limits: 800.000 MHz - 4.200000 GHz is displayed correctly. [v2]: Remove two lines instead of fixing broken code. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Renninger <trenn@suse.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-31tools/power/cpupower: allow running without cpu0Prarit Bhargava
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0, allowing systems to offline cpu0. But when cpu0 is offline, cpupower monitor will not display all processor and Mperf information: [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13 1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26 5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50 2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84 6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00 3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99 7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70 This patch replaces the hard-coded use of cpu0 in cpupower with the current cpu, allowing it to run without a cpu0. After the patch is applied, [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Nehalem || Mperf || Idle_Stats CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52 1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88 5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50 2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00 6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99 3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13 7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57 There are some minor cleanups included in this patch. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Add support for new AMD family 0x17Sherry Hurwitz
Add support for new AMD family 0x17 - Add bit field changes to the msr_pstate structure - Add the new formula for the calculation of cof - Changed method to access to CpbDis Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Acked-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Fix bug where return value was not usedSherry Hurwitz
Save return value from amd_pci_get_num_boost_states and remove redundant setting of *support Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13cpupower: Fix turbo frequency reporting for pre-Sandy Bridge coresBen Hutchings
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-19cpupower: Restore format of frequency-info limitStafford Horne
The intel_pstate kselftest expects that the output of `cpupower frequency-info -l | tail -1 | awk ' { print $1 } '` to get frequency limits. This does not work after the following two changes. - 562e5f1a3: rework the "cpupower frequency-info" command (Jacob Tanenbaum) removed parsable limit output - ce512b840: Do not analyse offlined cpus (Thomas Renninger) added newline to break limit parsing more This change preserves human readable output if wanted as well as parsable output for scripts/tests. Cc: Thomas Renninger <trenn@suse.com> Cc: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-11-01cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-setLaura Abbott
When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward <jseward@acm.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Thomas Renninger <trenn@suse.com> Cc: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-28cpupower: Add cpuidle parts into libraryThomas Renninger
This more or less is a renaming and moving of functions and should not introduce any functional change. cpupower was built from cpufrequtils (which had a C library providing easy access to cpu frequency platform info). In the meantime it got enhanced by quite some neat cpuidle userspace tools. Now the cpu idle functions have been separated and added to the cpupower.so library. So beside an already existing public header file: cpufreq.h cpupower now also exports these cpu idle functions in: cpuidle.h Here again pasted for better review of the interfaces: ====================================== int cpuidle_is_state_disabled(unsigned int cpu, unsigned int idlestate); int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate, unsigned int disable); unsigned long cpuidle_state_latency(unsigned int cpu, unsigned int idlestate); unsigned long cpuidle_state_usage(unsigned int cpu, unsigned int idlestate); unsigned long long cpuidle_state_time(unsigned int cpu, unsigned int idlestate); char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate); char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate); unsigned int cpuidle_state_count(unsigned int cpu); char *cpuidle_get_governor(void); char *cpuidle_get_driver(void); ====================================== Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-19cpupower: Fix build error in cpufreq-infoShreyas B. Prabhu
Fix the following build error by including limits.h - utils/cpufreq-info.c: In function ‘get_latency’: utils/cpufreq-info.c:437:29: error: ‘UINT_MAX’ undeclared (first use in this function) if (!latency || latency == UINT_MAX) { ^ Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Fixes: e98f033f94f3 (cpupower: fix how "cpupower frequency-info" interprets latency) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: fix how "cpupower frequency-info" interprets latencyJacob Tanenbaum
the intel-pstate driver does not support the ondemand governor and does not have a valid value in /sys/devices/system/cpu/cpu[x]/cpufreq/cpuinfo_transition_latency. The intel-pstate driver sets cpuinfo_transition_latency to CPUFREQ_ETERNAL (-1), the value written into cpuinfo_transition_latency is defind as an unsigned int so checking the read value against max unsigned int will determine if the value is valid. Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: rework the "cpupower frequency-info" commandJacob Tanenbaum
this patch makes two changes to the way that "cpupower frequancy-info" operates 1. make it so that querying individual values always returns a message to the user currently cpupower frequency info doesn't return anything to the user when querying an individual value cannot be returned [root@amd-dinar-09 cpupower]# cpupower -c 4 frequency-info -d analyzing CPU 4: [root@amd-dinar-09 cpupower]# I added messages so that each query prints a message to the terminal [root@amd-dinar-09 cpupower]# ./cpupower -c 4 frequency-info -d analyzing CPU 4: no or unknown cpufreq driver is active on this CPU [root@amd-dinar-09 cpupower]# (this is just one example) 2. change debug_output_one() to use the functions already provided by cpufreq-info.c to query individual values of interest. Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: Do not analyse offlined cpusThomas Renninger
Use sysfs_is_cpu_online(cpu) instead of cpufreq_cpu_exists(cpu) to detect offlined cpus. Re-arrange printfs slightly to have a consistent output even if you have multiple CPUs as output and even if offlined cores are in between. Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-03cpupower: Fix precedence issueThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02Creating a common structure initialization pattern for struct optionSriram Raghunathan
This patch tries to creates a common structure initialization within the cpupower tool. Previously the ``struct option`` was initialized using `designated initializer` technique which was not needed. There were conflicting initialization methods seen with bench/main.c & others. Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02cpupower: Enable disabled Cstates if they are below max latencyThomas Renninger
cpupower idle-set -D <latency> currently only disables all C-states that have a higher latency than the specified <latency>. But if deep sleep states were already disabled and have a lower latency, they should get enabled again. For example: This call: cpupower idle-set -D 30 disables all C-states with a higher or equal latency than 30. If one then calls: cpupower idle-set -D 100 C-states with a latency between 30-99 will get enabled again with this patch now. It is ensured that only C-states with a latency of 100 and higher are disabled. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02cpupower: Remove debug message when using cpupower idle-set -D switchThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02cpupower: cpupower monitor reports uninitialized values for offline cpusJacob Tanenbaum
[root@hp-dl980g7-02 linux]# cpupower monitor ... 5472| 0| 1|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 10567| 0| 159|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 1661206560|859272560| 150|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 1661206560|943093104| 140|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline because of this cpupower also holds the incorrect value for the number of physical packages in the machine Changed cpupower to initialize the values of an offline cpu's socket and core to -1, warn the user that one or more cpus is/are offline and not print statistics for offline cpus. This fix hides offlined cores where topology cannot be accessed. With a recent kernel patch suggested from Prarit Bhargava it may be possible that soft offlined cores' topology can still be parsed. This patch would then show which cores in which package/socket are offline, when sane toplogoy information is available. Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29tools: cpupower: Fix error when running cpupower monitorShreyas B. Prabhu
get_cpu_topology() tries to get topology info from all cpus by reading files in the topology sysfs dir. If a cpu is offlined, since it doesn't have topology dir, this function fails and returns -1. This causes functions relying on get_cpu_topology() to fail. For example- $ cpupower monitor Cannot read number of available processors Fix this by skipping fetching topology info for offline cpus. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23cpupower: Do not change the frequency of offline cpuShilpasri G Bhat
Check if the cpu is online before changing the frequency/governor of the cpu. Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-30cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS modeHerton R. Krzesinski
There is clearly wrong output when mperf monitor runs in MAX_FREQ_SYSFS mode: average frequency shows in kHz unit (despite the intended output to be in MHz), and percentages for C state information are all wrong (including high/negative values shown). The problem is that the max_frequency read on initialization isn't used where it should have been used on mperf_get_count_percent (to estimate the number of ticks in the given time period), and the value we read from sysfs is in kHz, so we must divide it to get the MHz value to use in current calculations. While at it, also I fixed another small issues in the debug output of max_frequency value in mperf_get_count_freq. Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-15cpupower: fix breakage from libpci API changeLucas Stach
libpci 3.3.0 introduced an additional member in the pci_filter struct which needs to be initialized to -1 to get the same behavior as before the API change. The libpci internal helpers got updated accordingly, but as the cpupower pci helpers initialized the struct themselves the behavior changed. Use the libpci helper pci_filter_init() to fix this and guard against similar breakages in the future. This fixes probing of the AMD fam12h/14h cpuidle monitor on systems with libpci >= 3.3.0. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19tools / cpupower: Fix no idle state information return valuePrarit Bhargava
sysfs_get_idlestate_count() returns an unsigned int. Returning -ENODEV is not the right thing to do here, and in any case is handled the same way as if there are no states found. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19tools / cpupower: Correctly detect if running as rootMichal Privoznik
Some operations, like frequency-set, need root privileges. However, the way that this is detected is not correct. The getuid() is called, while in fact geteuid() should be. This way we can allow distributions or users to set SETUID flags on the cpupower binary if they want to and let regular users change the cpu frequency governor. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-14Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"Prarit Bhargava
This reverts commit 16b7c275c055cc36218404b5d147be7f76575087. My previous commit 16b7c275c055 ("tools: cpupower: fix return checks for sysfs_get_idlestate_count()") was not correct. After looking at the changelog for cpupower I noticed that Thomas had changed the return of sysfs_get_idlestate_count() to an unsigned int to simplify the code. The problem is really that both he (in his original change) and I (in my new change) missed the obvious that sysfs_get_idlestate_count() can't return -ENODEV. It should just return 0 for "no c-states". Fixes: 16b7c275c055 (tools: cpupower: fix return checks for ...) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-05tools: cpupower: fix return checks for sysfs_get_idlestate_count()Prarit Bhargava
Red Hat and Fedora use a bug reporting tool that gathers data about "broken" systems called sosreport. Among other things, it includes the output of 'cpupower idle-info'. Executing 'cpupower idle-info' on a system that has cpuidle disabled via 'cpuidle.off=1' results in a 300 second hang in the cpupower application. ie) [root@intel-brickland-05]# cpupower idle-info Could not determine cpuidle driver Analyzing CPU 0: Number of idle states: -19 [hang] The problem is that the cpupower code only checks for a zero return from sysfs_get_idlestate_count(). The function can return -ENODEV (-19) as above. This patch fixes callers to sysfs_get_idlestate_count() to check the right return values. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30cpupower: Remove redundant error checkPeter Senna Tschudin
Remove double checks, and move the call to print_error to the first check. Replace break by return, and return 0 on success. The simplified version of the coccinelle semantic patch that fixes this issue is as follows: // <smpl> @@ expression E; identifier pr; expression list es; @@ for(...;...;...){ ... - if (E) break; + if (E){ + pr(es); + break; + } ... } - if(E) pr(es); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30cpupower: mperf monitor: Correct use of ! and &Himangi Saraogi
In commit ae91d60ba88ef0bdb1b5e9b2363bd52fc45d2af7, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-19PM / tools: cpupower: drop negativity check on unsigned valueAndrey Utkin
Link: https://bugzilla.kernel.org/show_bug.cgi?id=80621 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17cpupower: Remove mc and smt power aware scheduler info/settingsThomas Renninger
These kernel interfaces got removed by: commit 8e7fbcbc22c12414bcc9dfdd683637f58fb32759 Author: Peter Zijlstra <peterz@infradead.org> Date: Mon Jan 9 11:28:35 2012 +0100 sched: Remove stale power aware scheduling remnants and dysfunctional knobs No need to further keep them as userspace configurations. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17cpupower: cpupower info -b should return 0 on success, not the perf bias valueThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17cpupower: If root, try to load msr driver on x86 if /dev/cpu/0/msr is not ↵Thomas Renninger
available Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17cpupower: Introduce idle state disable-by-latency and enable-allThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-07PM / tools: cpupower: add option to display values without round offsPrarit Bhargava
The command "cpupower frequency-info" can be used when using cpupower to monitor and test processor behaviour to determine if the processor is behaving as expected. This data can be compared to the output of /proc/cpuinfo or the output of /sys/devices/system/cpu/cpuX/cpufreq/scaling_available_frequencies to determine if the cpu is in an expected state. When doing this I noticed comparison test failures due to the way the data is displayed in cpupower. For example, [root@intel-s3e37-02 cpupower]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 2262000 2261000 2128000 1995000 1862000 1729000 1596000 1463000 1330000 1197000 1064000 compared to [root@intel-s3e37-02 cpupower]# cpupower frequency-info analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.06 GHz - 2.26 GHz available frequency steps: 2.26 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz, 1.06 GHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 1.06 GHz and 2.26 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 2.26 GHz (asserted by call to hardware). boost state support: Supported: yes Active: yes shows very different values for the available frequency steps. The cpupower output rounds off values at 2 decimal points and this causes problems with test scripts. For example, with the data above, 1.064 is 1.06 1.197 is 1.20 1.596 is 1.60 1.995 is 2.00 2.128 is 2.13 and most confusingly, 2.261 is 2.26 2.262 is 2.26 Truncating these values serves no real purpose other than making the output pretty. Since the default has been to round off these values I am adding a -n/--no-rounding option to the cpupower utility that will display the data without rounding off the still significant digits. After patch, analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.000 us. hardware limits: 1.064000 GHz - 2.262000 GHz available frequency steps: 2.262000 GHz, 2.261000 GHz, 2.128000 GHz, 1.995000 GHz, 1.862000 GHz, 1.729000 GHz, 1.596000 GHz, 1.463000 GHz, 1.330000 GHz, 1.197000 GHz, 1.064000 GHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 1.064000 GHz and 2.262000 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 2.262000 GHz (asserted by call to hardware). boost state support: Supported: yes Active: yes Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Prarit Bhargava <prarit@redhat.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-17Merge branches 'acpi-tools' and 'pm-tools'Rafael J. Wysocki
* acpi-tools: ACPICA: acpidump: Update MAINTAINERS file to include tools folder for ACPI/ACPICA. ACPICA: acpidump: Enable tools Makefile to include acpi tools. ACPICA: acpidump: Cleanup tools/power/acpi makefiles. * pm-tools: PM / tools: new tool for suspend/resume performance optimization cpupower: Fix sscanf robustness in cpufreq-set
2014-01-08cpupower: Fix sscanf robustness in cpufreq-setOne Thousand Gnomes
The cpufreq-set tool has a missing length check. This is basically just correctness but still should get fixed. One of a set of sscanf problems reported by Jackie Chang Signed-off-by: Alan Cox <alan@linux.intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-17cpupower: Fix segfault due to incorrect getopt_long arugmentsJosh Boyer
If a user calls 'cpupower set --perf-bias 15', the process will end with a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi call. This is because the getopt_long structure currently has all of the options as having an optional_argument when they really have a required argument. We change the structure to use required_argument to match the short options and it resolves the issue. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439 Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Thomas Renninger <trenn@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-25tools: cpupower: fix wrong err msg not supported vs not availableThomas Renninger
idlestates in sysfs are counted from 0. This fixes a wrong error message. Current behavior on a machine with 4 sleep states is: cpupower idle-set -e 4 Idlestate 4 enabled on CPU 0 -----Wrong--------------------- cpupower idle-set -e 5 Idlestate enabling not supported by kernel -----Must and now will be ----- cpupower idle-set -e 5 Idlestate 6 not available on CPU 0 ------------------------------- cpupower idle-set -e 6 Idlestate 6 not available on CPU 0 Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 statesThomas Renninger
This specific processor supports 3 new package sleep states. Provide a monitor, so that the user can see their usage. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 18:23:01 +0000