summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)Author
2019-01-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02perf session: Add comment for perf_session__register_idle_thread()Adrian Hunter
Add a comment to perf_session__register_idle_thread() to bring attention to a pitfall with the idle task thread structure. The pitfall is that there should really be a 'struct thread' for the idle task of each cpu, but there is only one that can have pid == tid == 0. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-9-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Fix thread stack processing for the idle taskAdrian Hunter
perf creates a single 'struct thread' to represent the idle task. That is because threads are identified by PID and TID, and the idle task always has PID == TID == 0. However, there are actually separate idle tasks for each CPU. That creates a problem for thread stack processing which assumes that each thread has a single stack, not one stack per CPU. Fix that by passing through the CPU number, and in the case of the idle "thread", pick the thread stack from an array based on the CPU number. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-8-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Allocate an array of thread stacksAdrian Hunter
In preparation for fixing thread stack processing for the idle task, allocate an array of thread stacks. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-7-adrian.hunter@intel.com [ No need to check for NULL when calling zfree(), noticed by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Factor out thread_stack__init()Adrian Hunter
In preparation for fixing thread stack processing for the idle task, factor out thread_stack__init(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Allow for a thread stack arrayAdrian Hunter
In preparation for fixing thread stack processing for the idle task, allow for a thread stack array. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Avoid direct reference to the thread's stackAdrian Hunter
In preparation for fixing thread stack processing for the idle task, avoid direct reference to the thread's stack. The thread stack will change to an array of thread stacks, at which point the meaning of the direct reference will change. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-4-adrian.hunter@intel.com [ Rename thread_stack__ts() to thread__stack() since this operates on a 'thread' struct ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Tidy thread_stack__bottom() usageAdrian Hunter
In preparation for fixing thread stack processing for the idle task, tidy thread_stack__bottom() usage. Specifically, the parameter 'thread' is not needed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-02perf thread-stack: Simplify some code in thread_stack__process()Adrian Hunter
In preparation for fixing thread stack processing for the idle task, simplify some code in thread_stack__process(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-29Merge tag 'nds32-for-linus-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: - Perf support - Power management support - FPU support - Hardware prefetcher support - Build error fixed - Performance enhancement * tag 'nds32-for-linus-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: support hardware prefetcher nds32: Fix the items of hwcap_str ordering issue. math-emu/soft-fp.h: (_FP_ROUND_ZERO) cast 0 to void to fix warning math-emu/op-2.h: Use statement expressions to prevent negative constant shift nds32: support denormalized result through FP emulator nds32: Support FP emulation nds32: nds32 FPU port nds32: Remove duplicated include from pm.c nds32: Power management for nds32 nds32: Add document for NDS32 PMU. nds32: Add perf call-graph support. nds32: Perf porting nds32: Fix bug in bitfield.h nds32: Fix gcc 8.0 compiler option incompatible. nds32: Fill all TLB entries with kernel image mapping nds32: Remove the redundant assignment
2018-12-28perf c2c: Increase the HITM ratio limit for displayed cachelinesJiri Olsa
The cachelines being reported are the ones with percentages all the way down to 0.05%. That makes for very long output files. Raising that to 0.1%. The user can always specify --show-all if they want all the cachelines with hits. Suggested-by: Joe Mario <jmario@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181228101820.28010-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf c2c: Change the default coalesce setupJiri Olsa
Joe suggested to have the coalesce default set just to 'iaddr', because it's easier to read on the default 'perf c2c report' output. By removing the "pid" field from the default -c/--coalesce option, the 'perf c2c' report will group all the relevant PIDs under the instruction address ('iaddr') bucket. User can always run "-c pid,iaddr" for a more fine grained output on particular PIDs. Suggested-by: Joe Mario <jmario@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181228101820.28010-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace beauty ioctl: Beautify USBDEVFS_ commandsArnaldo Carvalho de Melo
For instance, while debugging the 'galileo' python utility to synchronize fitbit trackers: # perf trace -e ioctl ./run --force ioctl(0</dev/pts/8>, TCSETS, 0x7ffe28666420) = 0 ioctl(0</dev/pts/8>, TCSETS, 0x7ffe28666290) = 0 ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28666290) = 0 ioctl(2</dev/pts/8>, TCSETS, 0x7ffe28666290) = 0 ioctl(3</home/acme/hg/galileo/run>, TCSETS, 0x7ffe286663f0) = -1 ENOTTY (Inappropriate ioctl for device) ioctl(1</dev/pts/8>, TCSETS, 0x7ffe286655a0) = 0 ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28665470) = 0 ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28665470) = 0 ioctl(1</dev/pts/8>, TCSETS, 0x7ffe286654a0) = 0 ioctl(1</dev/pts/8>, TCSETS, 0x7ffe286654a0) = 0 ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28665400) = 0 ioctl(1</dev/pts/8>, TIOCSWINSZ, 0x7ffe286654c0) = 0 ioctl(0</dev/pts/8>, TIOCSWINSZ, 0x7ffe28665560) = 0 ioctl(0</dev/pts/8>, TIOCSWINSZ, 0x7ffe28665560) = 0 ioctl(0</dev/pts/8>, TIOCMGET, 0x7ffe28665560) = 0 ioctl(0</dev/pts/8>, TCSETS, 0x7ffe28665530) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_GET_CAPABILITIES, 0x561468dad048) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_GETDRIVER, 0x7ffe28665500) = -1 ENODATA (No data available) ioctl(10</dev/bus/usb/001/011>, USBDEVFS_GETDRIVER, 0x7ffe28665500) = -1 ENODATA (No data available) ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SETCONFIGURATION, 0x7ffe2866513c) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_CLAIMINTERFACE, 0x7ffe286647bc) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SUBMITURB, 0x561468dace40) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664c10) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664c10) = -1 EAGAIN (Resource temporarily unavailable) ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SUBMITURB, 0x561468dace40) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664dd0) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664dd0) = -1 EAGAIN (Resource temporarily unavailable) <SNIP> ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SUBMITURB, 0x561468e72ec0) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664cc0) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664cc0) = -1 EAGAIN (Resource temporarily unavailable) ioctl(10</dev/bus/usb/001/011>, USBDEVFS_RELEASEINTERFACE, 0x7ffe2866463c) = 0 ioctl(10</dev/bus/usb/001/011>, USBDEVFS_RELEASEINTERFACE, 0x7ffe2866463c) = 0 Tracker: 813F4690C3D1: Synchronisation successful # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6x2cawak7jno3gpp5pagzj50@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace beauty: Export function to get the files for a threadArnaldo Carvalho de Melo
So that beautifiers can access things like dev_maj. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wm5o51f206c5pi063dsaeraq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace: Wire up ioctl's USBDEBFS_ cmd table generatorArnaldo Carvalho de Melo
That ends up generating this: [acme@quaco perf]$ cat /tmp/build/perf/trace/beauty/generated/ioctl/usbdevfs_ioctl_array.c static const char *usbdevfs_ioctl_cmds[] = { [0] = "CONTROL", [10] = "SUBMITURB", [11] = "DISCARDURB", [12] = "REAPURB", [13] = "REAPURBNDELAY", [14] = "DISCSIGNAL", [15] = "CLAIMINTERFACE", [16] = "RELEASEINTERFACE", [17] = "CONNECTINFO", [18] = "IOCTL", [19] = "HUB_PORTINFO", [2] = "BULK", [20] = "RESET", [21] = "CLEAR_HALT", [22] = "DISCONNECT", [23] = "CONNECT", [24] = "CLAIM_PORT", [25] = "RELEASE_PORT", [26] = "GET_CAPABILITIES", [27] = "DISCONNECT_CLAIM", [28] = "ALLOC_STREAMS", [29] = "FREE_STREAMS", [3] = "RESETEP", [30] = "DROP_PRIVILEGES", [31] = "GET_SPEED", [4] = "SETINTERFACE", [5] = "SETCONFIGURATION", [8] = "GETDRIVER", }; #if 0 static const char *usbdevfs_ioctl_32_cmds[] = { [0] = "CONTROL32", [10] = "SUBMITURB32", [12] = "REAPURB32", [13] = "REAPURBNDELAY32", [14] = "DISCSIGNAL32", [18] = "IOCTL32", [2] = "BULK32", }; #endif $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-hkam6lt1g806l0p4b7buif3n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf beauty ioctl: Add generator for USBDEVFS_ ioctl commandsArnaldo Carvalho de Melo
Will be associated with fds with the right device major. $ tools/perf/trace/beauty/usbdevfs_ioctl.sh static const char *usbdevfs_ioctl_cmds[] = { [0] = "CONTROL", [10] = "SUBMITURB", [11] = "DISCARDURB", [12] = "REAPURB", [13] = "REAPURBNDELAY", [14] = "DISCSIGNAL", [15] = "CLAIMINTERFACE", [16] = "RELEASEINTERFACE", [17] = "CONNECTINFO", [18] = "IOCTL", [19] = "HUB_PORTINFO", [20] = "RESET", [21] = "CLEAR_HALT", [22] = "DISCONNECT", [23] = "CONNECT", [24] = "CLAIM_PORT", [25] = "RELEASE_PORT", [26] = "GET_CAPABILITIES", [27] = "DISCONNECT_CLAIM", [28] = "ALLOC_STREAMS", [29] = "FREE_STREAMS", [2] = "BULK", [30] = "DROP_PRIVILEGES", [31] = "GET_SPEED", [3] = "RESETEP", [4] = "SETINTERFACE", [5] = "SETCONFIGURATION", [8] = "GETDRIVER", }; #if 0 static const char *usbdevfs_ioctl_32_cmds[] = { [0] = "CONTROL32", [10] = "SUBMITURB32", [12] = "REAPURB32", [13] = "REAPURBNDELAY32", [14] = "DISCSIGNAL32", [18] = "IOCTL32", [2] = "BULK32", }; #endif $ Leaving the '32' variants commented, later we can try to support those as well, from some other hint (maybe something about the thread issuing the ioctls) and from the _IOC_SIZE(cmd). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-neq1lrji5k4ku0rktn7ytnri@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28tools headers uapi: Grab a copy of usbdevice_fs.hArnaldo Carvalho de Melo
Will be used to generate the string table for the USBDEVFS_ prefixed ioctl commands. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3vrm9b55tdhzn8sw9qazh4z5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace: Store the major number for a file when storing its pathnameArnaldo Carvalho de Melo
We keep a table for the fds to map them back to pathnames when showing 'fd' based APIs such as write(), store as well the major number for the device the path is in, to use in things like choosing the right ioctl 'cmd' beautifier. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qjkds7bnk7v7fk2xhqsb0a4v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace: Move the files table resizing to outside set_pathname()Arnaldo Carvalho de Melo
So that we can have that table expanded when setting other attributes. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-hzvpe3qwafe6sqcq3bhtbxds@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace: Rename thread_thread->paths to thread_trace->filesArnaldo Carvalho de Melo
So that we can add more per file attributes besides the pathname, such as which ioctl beautifier to use, for cases such as the sound and usbdeffs ioctls, that both use the 'U' command, so we have to differentiate at the major number for the device file. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-1895cmhrdz2dkl5prf2cj2yj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf script: Fix LBR skid dump problems in brstackinsnAndi Kleen
This is a fix for another instance of the skid problem Milian recently found [1] The LBRs don't freeze at the exact same time as the PMI is triggered. The perf script brstackinsn code that dumps LBR assembler assumes that the last branch in the LBR leads to the sample point. But with skid it's possible that the CPU executes one or more branches before the sample, but which do not appear in the LBR. What happens then is either that the sample point is before the last LBR branch. In this case the dumper sees a negative length and ignores it. Or it the sample point is long after the last branch. Then the dumper sees a very long block and dumps it upto its block limit (16k bytes), which is noise in the output. On typical sample session this can happen regularly. This patch tries to detect and handle the situation. On the last block that is dumped by the LBR dumper we always stop on the first branch. If the block length is negative just scan forward to the first branch. Otherwise scan until a branch is found. The PT decoder already has a function that uses the instruction decoder to detect branches, so we can just reuse it here. Then when a terminating branch is found print an indication and stop dumping. This might miss a few instructions, but at least shows no runaway blocks. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Link: http://lkml.kernel.org/r/20181120050617.4119-1-andi@firstfloor.org [ Resolved conflict with dd2e18e9ac20 ("perf tools: Support 'srccode' output") ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf python: Do not force closing original perf descriptor in ↵Jiri Olsa
evlist.get_pollfd() Ondřej reported that when compiled with python3, the python extension regresses in evlist.get_pollfd function behaviour. The evlist.get_pollfd function creates file objects from evlist's fds and returns them in a list. The python3 version also sets them to 'close the original descriptor' when the object dies (is closed), by passing True via the 'closefd' arg in the PyFile_FromFd call. The python's closefd doc says: If closefd is False, the underlying file descriptor will be kept open when the file is closed. That's why the following line in python3 closes all evlist fds: evlist.get_pollfd() the returned list is immediately destroyed and that takes down the original events fds. Passing closefd as False to PyFile_FromFd to fix this. Reported-by: Ondřej Lysoněk <olysonek@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support") Link: http://lkml.kernel.org/r/20181226112121.5285-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28perf trace: Use correct SECCOMP prefix spelling, "SECOMP_*" -> "SECCOMP_*"Colin Ian King
The spelling of the SECCOMP is incorrect, fix these. Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Fixes: c65c83ffe904 ("perf trace: Allow asking for not suppressing common string prefixes") Link: http://lkml.kernel.org/r/20181221084809.6108-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-27Merge tag 'powerpc-4.21-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing" * tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits) Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask" powerpc/zImage: Also check for stdout-path powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y macintosh: Use of_node_name_{eq, prefix} for node name comparisons ide: Use of_node_name_eq for node name comparisons powerpc: Use of_node_name_eq for node name comparisons powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name powerpc/mm: Remove very old comment in hash-4k.h powerpc/pseries: Fix node leak in update_lmb_associativity_index() powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL powerpc/dts/fsl: Fix dtc-flagged interrupt errors clk: qoriq: add more compatibles strings powerpc/fsl: Use new clockgen binding powerpc/83xx: handle machine check caused by watchdog timer powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved" powerpc/fsl_pci: simplify fsl_pci_dma_set_mask arch/powerpc/fsl_rmu: Use dma_zalloc_coherent vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver vfio_pci: Allow regions to add own capabilities vfio_pci: Allow mapping extra regions ...
2018-12-21perf trace: Do not hardcode the size of the tracepoint common_ fieldsArnaldo Carvalho de Melo
We shouldn't hardcode the size of the tracepoint common_ fields, use the offset of the 'id'/'__syscallnr' field in the sys_enter event instead. This caused the augmented syscalls code to fail on a particular build of a PREEMPT_RT_FULL kernel where these extra 'common_migrate_disable' and 'common_padding' fields were before the syscall id one: # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/format name: sys_enter ID: 22 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned short common_migrate_disable; offset:8; size:2; signed:0; field:unsigned short common_padding; offset:10; size:2; signed:0; field:long id; offset:16; size:8; signed:1; field:unsigned long args[6]; offset:24; size:48; signed:0; print fmt: "NR %ld (%lx, %lx, %lx, %lx, %lx, %lx)", REC->id, REC->args[0], REC->args[1], REC->args[2], REC->args[3], REC->args[4], REC->args[5] # All those 'common_' prefixed fields are zeroed when they hit a BPF tracepoint hook, we better just discard those, i.e. somehow pass an offset to the BPF program from the start of the ctx and make adjustments in the 'perf trace' handlers to adjust the offset of the syscall arg offsets obtained from tracefs. Till then, fix it the quick way and add this to the augmented_raw_syscalls.c to bet it to work in such kernels: diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c index 53c233370fae..1f746f931e13 100644 --- a/tools/perf/examples/bpf/augmented_raw_syscalls.c +++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c @@ -38,12 +38,14 @@ struct bpf_map SEC("maps") syscalls = { struct syscall_enter_args { unsigned long long common_tp_fields; + long rt_common_tp_fields; long syscall_nr; unsigned long args[6]; }; struct syscall_exit_args { unsigned long long common_tp_fields; + long rt_common_tp_fields; long syscall_nr; long ret; }; Just to check that this was the case. Fix it properly later, for now remove the hardcoding of the offset in the 'perf trace' side and document the situation with this patch. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2pqavrktqkliu5b9nzouio21@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-21perf build: Don't unconditionally link the libbfd feature test to -liberty ↵Stanislav Fomichev
and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-21perf beauty mmap: PROT_WRITE should come before PROT_EXECArnaldo Carvalho de Melo
To match strace output: # cat mmap.c #include <sys/mman.h> int main(void) { mmap(0, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); return 0; } # strace -e mmap ./mmap |& grep -v ^+++ mmap(NULL, 103484, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f5bae400000 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5bae3fe000 mmap(NULL, 3889792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5bade40000 mmap(0x7f5bae1ec000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ac000) = 0x7f5bae1ec000 mmap(0x7f5bae1f2000, 14976, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f5bae1f2000 mmap(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5bae419000 # trace -e mmap ./mmap |& grep -v ^+++ mmap(NULL, 103484, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f6646c25000 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f6646c23000 mmap(NULL, 3889792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f6646665000 mmap(0x7f6646a11000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ac000) = 0x7f6646a11000 mmap(0x7f6646a17000, 14976, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f6646a17000 mmap(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f6646c3e000 # Reported-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-nt49d6iqle80cw8f529ovaqi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-21perf trace: Check if the raw_syscalls:sys_{enter,exit} are setup before ↵Arnaldo Carvalho de Melo
setting tp filter While updating 'perf trace' on an machine with an old precompiled augmented_raw_syscalls.o that didn't setup the syscall map the new 'perf trace' codebase notices the augmented_raw_syscalls.o eBPF event, decides to use it instead of the old raw_syscalls:sys_{enter,exit} method, but then because we don't have the syscall map tries to set the tracepoint filter on the sys_{enter,exit} evsels, that are NULL, segfaulting. Make the code more robust by checking it those tracepoints have their respective evsels in place before trying to set the tp filter. With this we still get everything to work, just not setting up the syscall filters, which is better than a segfault. Now to update the precompiled augmented_raw_syscalls.o and continue development :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3ft5rjdl05wgz2pwpx2z8btu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-20powerpc/perf: Update perf_regs structure to include SIERMadhavan Srinivasan
On each sample, Sample Instruction Event Register (SIER) content is saved in pt_regs. SIER does not have a entry as-is in the pt_regs but instead, SIER content is saved in the "dar" register of pt_regs. Patch adds another entry to the perf_regs structure to include the "SIER" printing which internally maps to the "dar" of pt_regs. It also check for the SIER availability in the platform and present value accordingly Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-18perf symbols: Relax checks on perf-PID.map ownershipArnaldo Carvalho de Melo
Those are simple enough, and usually not produced by root, instead by whatever user is running java, rust, Node.js JIT code that end up generating those /tmp/perf-PID.map for resolution of symbols in the anonymous executable maps. Having to use --force to resolve symbols in 'perf top' is a distraction, as recently I experienced when node.js symbols were not being resolved by 'perf top'. Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hítalo Silva <hitalos@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-tk2jgo2v4v2yjuj28axbpppo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Wire up the fadvise 'advice' table generatorArnaldo Carvalho de Melo
That ends up generating this: $ cat /tmp/build/perf/trace/beauty/generated/fadvise_advice_array.c static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zwbslubagram8a8zdc003u8h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf beauty: Add generator for fadvise64's 'advice' arg constantsArnaldo Carvalho de Melo
$ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ This has a hack wrt the s390 difference. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-tb7jguv01u8p570piq13eioh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18tools headers uapi: Grab a copy of fadvise.hArnaldo Carvalho de Melo
Will be used to generate the string table for fadvise64's 'advice' argument. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-muswpnft8q9krktv052yrgsc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf beauty mmap: Print mmap's 'offset' arg in hexadecimalArnaldo Carvalho de Melo
Also to make it match 'strace' output, for regression testing. Both now produce this option, when 'perf trace' uses a .perfconfig asking for the strace like output: mmap(0x7faf66e6a000, 1363968, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7faf66e6a000 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-27qhouo1kaac2iyl85nfnsf5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf beauty mmap: Print PROT_READ before PROT_EXEC to match strace outputArnaldo Carvalho de Melo
Helps with comparing 'strace' and 'perf trace' output, for mutual regression testing. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-va0qe95xbhep5hy52aq5qe0v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace beauty: Beautify arch_prctl()'s argumentsArnaldo Carvalho de Melo
This actually so far, AFAIK is available only in x86, so the code was put in place with x86 prefixes, in arches where it is not available it will just not be called, so no further mechanisms are needed at this time. Later, when other arches wire this up, we'll just look at the uname (live sessions) or perf_env data in the perf.data header to auto-wire the right beautifier. With this the output is the same as produced by 'strace' when used with the following ~/.perfconfig: # cat ~/.perfconfig [llvm] dump-obj = true [trace] add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o show_zeros = yes show_duration = no no_inherit = yes show_timestamp = no show_arg_names = no args_alignment = -40 show_prefix = yes # And, on fedora 29, since the string tables are generated from the kernel sources, we don't know about 0x3001, just like strace: --- /tmp/strace 2018-12-17 11:22:08.707586721 -0300 +++ /tmp/trace 2018-12-18 11:11:32.037512729 -0300 @@ -1,49 +1,49 @@ -arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument) +arch_prctl(0x3001 /* ARCH_??? */, 0x7ffe4eb93ae0) = -1 EINVAL (Invalid argument) -arch_prctl(ARCH_SET_FS, 0x7faf6700f540) = 0 +arch_prctl(ARCH_SET_FS, 0x7fb507364540) = 0 And that seems to be related to the CET/Shadow Stack feature, that userland in Fedora 29 (glibc 2.28) are querying the kernel about, that 0x3001 seems to be ARCH_CET_STATUS, I'll check the situation and test with a fedora 29 kernel to see if the other codes are used. A diff that ignores the different pointers for different runs needs to be put in place in the upcoming regression tests comparing 'perf trace's output to strace's. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-73a9prs8ktkrt97trtdmdjs8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: When showing string prefixes show prefix + ??? for unknown entriesArnaldo Carvalho de Melo
To match 'strace' output, like in: arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kx59j2dk5l1x04ou57mt99ck@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Move strarrays to beauty.h for further reuseArnaldo Carvalho de Melo
We'll use it in the upcoming arch_prctl() 'code' arg beautifier. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6e4tj2fjen8qa73gy4u49vav@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf beauty: Wire up the x86_arch prctl code table generatorArnaldo Carvalho de Melo
$ cat /tmp/build/perf/trace/beauty/generated/x86_arch_prctl_code_array.c #define x86_arch_prctl_codes_1_offset 0x1001 static const char *x86_arch_prctl_codes_1[] = { [0x1001 - 0x1001]= "SET_GS", [0x1002 - 0x1001]= "SET_FS", [0x1003 - 0x1001]= "GET_FS", [0x1004 - 0x1001]= "GET_GS", [0x1011 - 0x1001]= "GET_CPUID", [0x1012 - 0x1001]= "SET_CPUID", }; #define x86_arch_prctl_codes_2_offset 0x2001 static const char *x86_arch_prctl_codes_2[] = { [0x2001 - 0x2001]= "MAP_VDSO_X32", [0x2002 - 0x2001]= "MAP_VDSO_32", [0x2003 - 0x2001]= "MAP_VDSO_64", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3r9blij6n8wdlsyd5dujx86r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf beauty: Add a string table generator for x86's 'arch_prctl' codesArnaldo Carvalho de Melo
$ tools/perf/trace/beauty/x86_arch_prctl.sh #define x86_arch_prctl_codes_1_offset 0x1001 static const char *x86_arch_prctl_codes_1[] = { [0x1001 - 0x1001]= "SET_GS", [0x1002 - 0x1001]= "SET_FS", [0x1003 - 0x1001]= "GET_FS", [0x1004 - 0x1001]= "GET_GS", [0x1011 - 0x1001]= "GET_CPUID", [0x1012 - 0x1001]= "SET_CPUID", }; #define x86_arch_prctl_codes_2_offset 0x2001 static const char *x86_arch_prctl_codes_2[] = { [0x2001 - 0x2001]= "MAP_VDSO_X32", [0x2002 - 0x2001]= "MAP_VDSO_32", [0x2003 - 0x2001]= "MAP_VDSO_64", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-w0fux1psivphhx6rve8kn3vq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18tools include arch: Grab a copy of x86's prctl.hArnaldo Carvalho de Melo
We need it to generate the tables for the 'code' arch_prctl's syscall argument. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vu890pi18fpd4eyz61cazckj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Show NULL when syscall pointer args are 0Arnaldo Carvalho de Melo
Matching strace's output format. The 'format' file for the syscall tracepoints have an indication if the arg is a pointer, with some exceptions like 'mmap' that has its first arg as an 'unsigned long', so use a heuristic using the argument name, i.e. if it contains the 'addr' substring, format it with the pointer formatter. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ddghemr8qrm6i0sb8awznbze@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Enclose the errno strings with ()Arnaldo Carvalho de Melo
To match strace, now both emit the same line for calls like: access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-krxl6klsqc9qyktoaxyih942@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf augmented_raw_syscalls: Copy 'access' arg as wellArnaldo Carvalho de Melo
This will all come from userspace, but to test the changes to make 'perf trace' output similar to strace's, do this one more now manually. To update the precompiled augmented_raw_syscalls.o binary I just run: # perf record -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1 LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data ] # Because to have augmented_raw_syscalls to be always used and a fast startup and remove the need to have the llvm toolchain installed, I'm using: # perf config | grep add_events trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o # So when doing changes to augmented_raw_syscals.c one needs to rebuild the .o file. This will be done automagically later, i.e. have a 'make' behaviour of recompiling when the .c gets changed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-lw3i2atyq8549fpqwmszn3qp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Add alignment spaces after the closing parensArnaldo Carvalho de Melo
To use strace's style, helping in comparing the output of 'perf trace' with the one from 'strace', to help in upcoming regression tests. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mw6peotz4n84rga0fk78buff@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace beauty: Print O_RDONLY when (flags & O_ACCMODE) == 0Arnaldo Carvalho de Melo
And there are more flags, to match strace's output. openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 Also to help with regression tests. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ofovpmvdli3bwch30936xn7t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Allow asking for not suppressing common string prefixesArnaldo Carvalho de Melo
So far we've been suppressing common stuff such as "MAP_" in the mmap flags, showing "SHARED" instead of "MAP_SHARED", allow for those prefixes (and a few suffixes) to be shown: # trace -e *map,open*,*seek sleep 1 openat("/etc/ld.so.cache", CLOEXEC) = 3 mmap(0, 109093, READ, PRIVATE, 3, 0) = 0x7ff61c695000 openat("/lib64/libc.so.6", CLOEXEC) = 3 lseek(3, 792, SET) = 792 mmap(0, 8192, READ|WRITE, PRIVATE|ANONYMOUS) = 0x7ff61c693000 lseek(3, 792, SET) = 792 lseek(3, 864, SET) = 864 mmap(0, 1857568, READ, PRIVATE|DENYWRITE, 3, 0) = 0x7ff61c4cd000 mmap(0x7ff61c4ef000, 1363968, EXEC|READ, PRIVATE|FIXED|DENYWRITE, 3, 139264) = 0x7ff61c4ef000 mmap(0x7ff61c63c000, 311296, READ, PRIVATE|FIXED|DENYWRITE, 3, 1503232) = 0x7ff61c63c000 mmap(0x7ff61c689000, 24576, READ|WRITE, PRIVATE|FIXED|DENYWRITE, 3, 1814528) = 0x7ff61c689000 mmap(0x7ff61c68f000, 14368, READ|WRITE, PRIVATE|FIXED|ANONYMOUS) = 0x7ff61c68f000 munmap(0x7ff61c695000, 109093) = 0 openat("/usr/lib/locale/locale-archive", CLOEXEC) = 3 mmap(0, 217749968, READ, PRIVATE, 3, 0) = 0x7ff60f523000 # # vim ~/.perfconfig # # perf config llvm.dump-obj=true trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o trace.show_zeros=yes trace.show_duration=no trace.no_inherit=yes trace.show_timestamp=no trace.show_arg_names=no trace.args_alignment=0 trace.string_quote=" trace.show_prefix=yes # # # trace -e *map,open*,*seek sleep 1 openat(AT_FDCWD, "/etc/ld.so.cache", O_CLOEXEC) = 3 mmap(0, 109093, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7ebbe59000 openat(AT_FDCWD, "/lib64/libc.so.6", O_CLOEXEC) = 3 lseek(3, 792, SEEK_SET) = 792 mmap(0, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7ebbe57000 lseek(3, 792, SEEK_SET) = 792 lseek(3, 864, SEEK_SET) = 864 mmap(0, 1857568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7ebbc91000 mmap(0x7f7ebbcb3000, 1363968, PROT_EXEC|PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 139264) = 0x7f7ebbcb3000 mmap(0x7f7ebbe00000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1503232) = 0x7f7ebbe00000 mmap(0x7f7ebbe4d000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 1814528) = 0x7f7ebbe4d000 mmap(0x7f7ebbe53000, 14368, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f7ebbe53000 munmap(0x7f7ebbe59000, 109093) = 0 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_CLOEXEC) = 3 mmap(0, 217749968, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7eaece7000 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mtn1i4rjowjl72trtnbmvjd4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Add a prefix member to the strarray classArnaldo Carvalho de Melo
So that the user, in an upcoming patch, can select printing it to get the full string as used in the source code, not one with a common prefix chopped off so as to make the output more compact. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zypczc88gzbmeqx7b372s138@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-18perf trace: Enclose strings with double quotesArnaldo Carvalho de Melo
To match 'strace' output, helping with upcoming regression tests comparing both outputs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jab52t1dcuh6vlztqle9g7u9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 00:44:01 +0000