| Age | Commit message (Collapse) | Author |
|---|
|
events incase of overlapping events
Commit f01642e4912b ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly incase we try to run multiple metric groups with overlapping
event.
With current upstream version, incase of overlapping metric events issue
is, we always start our comparision logic from start. So, the events
which already matched with some metric group also take part in
comparision logic. Because of that when we have overlapping events, we
end up matching current metric group event with already matched one.
For example, in skylake machine we have metric event CoreIPC and
Instructions. Both of them need 'inst_retired.any' event value. As
events in Instructions is subset of events in CoreIPC, they endup in
pointing to same 'inst_retired.any' value.
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
1,254,992,790 inst_retired.any # 1254992790.0
Instructions
# 1.3 CoreIPC
977,172,805 cycles
1,254,992,756 inst_retired.any
1.000802596 seconds time elapsed
command:# sudo ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
948,650 uops_retired.retire_slots
866,182 inst_retired.any # 0.7 IPC
866,182 inst_retired.any
1,175,671 cpu_clk_unhalted.thread
Patch fixes the issue by adding a new bool pointer 'evlist_used' to keep
track of events which already matched with some group by setting it
true. So, we skip all used events in list when we start comparision
logic. Patch also make some changes in comparision logic, incase we get
a match miss, we discard the whole match and start again with first
event id in metric event.
With this patch:
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
3,348,415 inst_retired.any # 0.3 CoreIPC
11,779,026 cycles
3,348,381 inst_retired.any # 3348381.0
Instructions
1.001649056 seconds time elapsed
command:# ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
1,023,148 uops_retired.retire_slots # 1.1 UPI
924,976 inst_retired.any
924,976 inst_retired.any # 0.6 IPC
1,489,414 cpu_clk_unhalted.thread
1.003064672 seconds time elapsed
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200221101121.28920-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is a slight misalignment in -A -I output.
For example:
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000440863 CPU0 1,068,388 cpu/event=cpu-cycles/
1.000440863 CPU1 875,954 cpu/event=cpu-cycles/
1.000440863 CPU2 3,072,538 cpu/event=cpu-cycles/
1.000440863 CPU3 4,026,870 cpu/event=cpu-cycles/
1.000440863 CPU4 5,919,630 cpu/event=cpu-cycles/
1.000440863 CPU5 2,714,260 cpu/event=cpu-cycles/
1.000440863 CPU6 2,219,240 cpu/event=cpu-cycles/
1.000440863 CPU7 1,299,232 cpu/event=cpu-cycles/
The value of counts is not aligned with the column "counts" and
the event name is not aligned with the column "events".
With this patch, the output is,
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000423009 CPU0 997,421 cpu/event=cpu-cycles/
1.000423009 CPU1 1,422,042 cpu/event=cpu-cycles/
1.000423009 CPU2 484,651 cpu/event=cpu-cycles/
1.000423009 CPU3 525,791 cpu/event=cpu-cycles/
1.000423009 CPU4 1,370,100 cpu/event=cpu-cycles/
1.000423009 CPU5 442,072 cpu/event=cpu-cycles/
1.000423009 CPU6 205,643 cpu/event=cpu-cycles/
1.000423009 CPU7 1,302,250 cpu/event=cpu-cycles/
Now output is aligned.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200218071614.25736-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometimes we may need to reload the browser to update the output since
some options are changed.
This patch creates a new key K_RELOAD. Once the __cmd_report() returns
K_RELOAD, it would repeat the whole process, such as, read samples from
data file, sort the data and display in the browser.
v5:
---
1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h.
2. Skip setup_sorting() in repeat path if last key is K_RELOAD.
v4:
---
Need to quit in perf_evsel_menu__run if key is K_RELOAD.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When performing "perf report --group", it shows the event group
information together. By default, the output is sorted by the first
event in group.
It would be nice for user to select any event for sorting. This patch
introduces a new option "--group-sort-idx" to sort the output by the
event at the index n in event group.
For example,
Before:
# perf report --group --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
...
After:
# perf report --group --stdio --group-sort-idx 3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick
Now the output is sorted by the fourth event in group.
v7:
---
Rebase to latest perf/core, no other change.
v4:
---
1. Update Documentation/perf-report.txt to mention
'--group-sort-idx' support multiple groups with different
amount of events and it should be used on grouped events.
2. Update __hpp__group_sort_idx(), just return when the
idx is out of limit.
3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups.
So now we don't need to use together with --group.
v3:
---
Refine the code in __hpp__group_sort_idx().
Before:
for (i = 1; i < nr_members; i++) {
if (i == idx) {
ret = field_cmp(fields_a[i], fields_b[i]);
if (ret)
goto out;
}
}
After:
if (idx >= 1 && idx < nr_members) {
ret = field_cmp(fields_a[idx], fields_b[idx]);
if (ret)
goto out;
}
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-2-yao.jin@linux.intel.com
[ Renamed pair_fields_alloc() to hist_entry__new_pair() and combined decl + assignment of vars ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For perf report on stripped binaries it is currently impossible to do
annotation. The annotation state is all tied to symbols, but there are
either no symbols, or symbols are not covering all the code.
We should support the annotation functionality even without symbols.
This patch fakes a symbol and the symbol name is the string of address.
After that, we just follow current annotation working flow.
For example,
1. perf report
Overhead Command Shared Object Symbol
20.67% div libc-2.27.so [.] __random_r
17.29% div libc-2.27.so [.] __random
10.59% div div [.] 0x0000000000000628
9.25% div div [.] 0x0000000000000612
6.11% div div [.] 0x0000000000000645
2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER.
Annotate 0x0000000000000628
Zoom into div thread
Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel)
Browse map details
Run scripts for samples of symbol [0x0000000000000628]
Run scripts for all samples
Switch to another data file in PWD
Exit
3. Select the "Annotate 0x0000000000000628" and ENTER.
Percent│
│
│
│ Disassembly of section .text:
│
│ 0000000000000628 <.text+0x68>:
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
Now we can see the dump of object starting from 0x628.
v5:
---
Remove the hotkey 'a' implementation from this patch. It
will be moved to a separate patch.
v4:
---
1. Support the hotkey 'a'. When we press 'a' on address,
now it supports the annotation.
2. Change the patch title from
"Support interactive annotation of code without symbols" to
"perf report: Support interactive annotation of code without symbols"
v3:
---
Keep just the ANNOTATION_DUMMY_LEN, and remove the
opts->annotate_dummy_len since it's the "maybe in future
we will provide" feature.
v2:
---
Fix a crash issue when annotating an address in "unknown" object.
The steps to reproduce this issue:
perf record -e cycles:u ls
perf report
75.29% ls ld-2.27.so [.] do_lookup_x
23.64% ls ld-2.27.so [.] __GI___tunables_init
1.04% ls [unknown] [k] 0xffffffff85c01210
0.03% ls ld-2.27.so [.] _start
When annotating 0xffffffff85c01210, the crash happens.
v2 adds checking for ms->map in add_annotate_opt(). If the object is
"unknown", ms->map is NULL.
Committer notes:
Renamed new_annotate_sym() to symbol__new_unresolved().
Use PRIx64 to fix this issue in some 32-bit arches:
ui/browsers/hists.c: In function 'symbol__new_unresolved':
ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr);
~~~~~~^ ~~~~
%-#.*llx
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For branch mode, if the symbol is not found, it prints
the address.
For example, 0x0000555eee0365a0 in below output.
Overhead Command Source Shared Object Source Symbol Target Symbol
17.55% div libc-2.27.so [.] __random [.] __random
6.11% div div [.] 0x0000555eee0365a0 [.] rand
6.10% div libc-2.27.so [.] rand [.] 0x0000555eee036769
5.80% div libc-2.27.so [.] __random_r [.] __random
5.72% div libc-2.27.so [.] __random [.] __random_r
5.62% div libc-2.27.so [.] __random_r [.] __random_r
5.38% div libc-2.27.so [.] __random [.] rand
4.56% div libc-2.27.so [.] __random [.] __random
4.49% div div [.] 0x0000555eee036779 [.] 0x0000555eee0365ff
4.25% div div [.] 0x0000555eee0365fa [.] 0x0000555eee036760
But it's not very easy to understand what the instructions
are in the binary. So this patch uses the al_addr instead.
With this patch, the output is
Overhead Command Source Shared Object Source Symbol Target Symbol
17.55% div libc-2.27.so [.] __random [.] __random
6.11% div div [.] 0x00000000000005a0 [.] rand
6.10% div libc-2.27.so [.] rand [.] 0x0000000000000769
5.80% div libc-2.27.so [.] __random_r [.] __random
5.72% div libc-2.27.so [.] __random [.] __random_r
5.62% div libc-2.27.so [.] __random_r [.] __random_r
5.38% div libc-2.27.so [.] __random [.] rand
4.56% div libc-2.27.so [.] __random [.] __random
4.49% div div [.] 0x0000000000000779 [.] 0x00000000000005ff
4.25% div div [.] 0x00000000000005fa [.] 0x0000000000000760
Now we can use objdump to dump the object starting from 0x5a0.
For example,
objdump -d --start-address 0x5a0 div
00000000000005a0 <rand@plt>:
5a0: ff 25 2a 0a 20 00 jmpq *0x200a2a(%rip) # 200fd0 <__cxa_finalize@plt+0x200a20>
5a6: 68 02 00 00 00 pushq $0x2
5ab: e9 c0 ff ff ff jmpq 570 <srand@plt-0x10>
...
Committer testing:
[root@seventh ~]# perf record -a -b sleep 1
[root@seventh ~]# perf report --header-only | grep cpudesc
# cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
[root@seventh ~]# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
[root@seventh ~]#
Before:
[root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles'
# Event count (approx.): 2240
#
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ............... ........................ ...................... ...................... ..................
#
0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465c82 [.] 0x00007fe406465d80 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465ded [.] 0x00007fe406465c30 1
0.09% systemd libsystemd-shared-241.so [.] 0x00007fe406465e4e [.] 0x00007fe406465de0 1
0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2
0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204
0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7
[root@seventh ~]#
After:
[root@seventh ~]# perf report --stdio --dso libsystemd-shared-241.so | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2K of event 'cycles'
# Event count (approx.): 2240
#
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ............... ........................ ...................... ...................... ..................
#
0.13% systemd-journal libc-2.29.so [.] cfree@GLIBC_2.2.5 [.] _int_free 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7c82 [.] 0x00000000000f7d80 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7ded [.] 0x00000000000f7c30 1
0.09% systemd libsystemd-shared-241.so [.] 0x00000000000f7e4e [.] 0x00000000000f7de0 1
0.09% systemd-journal systemd-journald [.] free@plt [.] cfree@GLIBC_2.2.5 1
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 18
0.09% systemd-journal libc-2.29.so [.] _int_free [.] _int_free 2
0.04% systemd libsystemd-shared-241.so [.] bus_resolve@plt [.] bus_resolve 204
0.04% systemd libsystemd-shared-241.so [.] getpid_cached@plt [.] getpid_cached 7
[root@seventh ~]#
Lets use -v to get full paths and then try objdump on the unresolved address:
[root@seventh ~]# perf report -v --stdio --dso libsystemd-shared-241.so |& grep libsystemd-shared-241.so | tail -1
0.04% systemd-journal /usr/lib/systemd/libsystemd-shared-241.so 0x80c1a B [.] 0x0000000000080c1a 0x80a95 B [.] 0x0000000000080a95 61
[root@seventh ~]#
[root@seventh ~]# objdump -d --start-address 0x00000000000f7d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20
/usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64
Disassembly of section .text:
00000000000f7d80 <proc_cmdline_parse_given@@SD_SHARED+0x330>:
f7d80: 41 39 11 cmp %edx,(%r9)
f7d83: 0f 84 ff fe ff ff je f7c88 <proc_cmdline_parse_given@@SD_SHARED+0x238>
f7d89: 4c 8d 05 97 09 0c 00 lea 0xc0997(%rip),%r8 # 1b8727 <utf8_skip_data@@SD_SHARED+0x3147>
f7d90: b9 49 00 00 00 mov $0x49,%ecx
f7d95: 48 8d 15 c9 f5 0b 00 lea 0xbf5c9(%rip),%rdx # 1b7365 <utf8_skip_data@@SD_SHARED+0x1d85>
f7d9c: 31 ff xor %edi,%edi
f7d9e: 48 8d 35 9b ff 0b 00 lea 0xbff9b(%rip),%rsi # 1b7d40 <utf8_skip_data@@SD_SHARED+0x2760>
f7da5: e8 a6 d6 f4 ff callq 45450 <log_assert_failed_realm@plt>
f7daa: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
f7db0: 41 56 push %r14
f7db2: 41 55 push %r13
f7db4: 41 54 push %r12
f7db6: 55 push %rbp
[root@seventh ~]#
If we tried the the reported address before this patch:
[root@seventh ~]# objdump -d --start-address 0x00007fe406465d80 /usr/lib/systemd/libsystemd-shared-241.so | head -20
/usr/lib/systemd/libsystemd-shared-241.so: file format elf64-x86-64
[root@seventh ~]#
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After copying Arm64's perf archive with object files and perf.data file
to x86 laptop, the x86's perf kernel symbol resolution fails. It
outputs 'unknown' for all symbols parsing.
This issue is root caused by the function elf__needs_adjust_symbols(),
x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten
their own version. elf__needs_adjust_symbols() decides if need to parse
symbols with the relative offset address; but x86 building uses the weak
function which misses to check for the elf type 'ET_DYN', so that it
cannot parse symbols in Arm DSOs due to the wrong result from
elf__needs_adjust_symbols().
The DSO parsing should not depend on any specific architecture perf
building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa.
And confirmed by Naveen N. Rao that powerpc64 kernels are not being
built as ET_DYN anymore and change to ET_EXEC.
This patch removes the arch specific functions for Arm64 and powerpc and
changes elf__needs_adjust_symbols() as a common function.
In the common elf__needs_adjust_symbols(), it checks an extra condition
'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be
parsed properly with x86's perf tool.
Before:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms])
After:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms])
v3: Changed to check for ET_DYN across all architectures.
v2: Fixed Arm64 and powerpc native building.
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20200306015759.10084-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reproducible with a clang asan build and then running perf test in
particular 'Parse event definition strings'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200314170356.62914-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Fix binding of AIO user space buffers to nodes
maps:
Dominik b. Czarnota:
- Fix off by one in strncpy() size argument.
Arnaldo Carvalho de Melo:
- Use strstarts() to look for Android libraries.
Ian Rogers:
- Give synthetic mmap events an inode generation.
man pages:
Ian Rogers:
- Set man page date to last git commit.
perf test:
Ian Rogers:
- Print if shell directory isn't present.
perf report:
Jin Yao:
- Fix no branch type statistics report issue.
perf expr:
Jiri Olsa:
- Fix copy/paste mistake
vendor events:
Kan Liang:
- Support metric constraints.
vendor events intel:
Kan Liang:
- Add NO_NMI_WATCHDOG metric constraint.
vendor events s390:
Thomas Richter:
- Add new deflate counters for IBM z15.
ARM cs-etm:
Leo Yan:
- Last branch improvements.
intel-pt:
Adrian Hunter:
- Update intel-pt.txt file with new location of the documentation.
- Add Intel PT man page references.
- Rename intel-pt.txt and put it in man page format.
perl scripting:
Michael Petlan:
- Add common_callchain to fix argument order.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
tools/perf/util/map.c
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Copy/paste leftover from recent refactor.
Fixes: 26226a97724d ("perf expr: Move expr lexer to flex")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200315155609.603948-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When mmap2 events are synthesized the ino_generation field isn't being
set leading to uninitialized memory being compared.
Caught with clang's -fsanitize=memory:
==124733==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55a96a6a65cc in __dso_id__cmp tools/perf/util/dsos.c:23:6
#1 0x55a96a6a81d5 in dso_id__cmp tools/perf/util/dsos.c:38:9
#2 0x55a96a6a717f in __dso__cmp_long_name tools/perf/util/dsos.c:74:15
#3 0x55a96a6a6c4c in __dsos__findnew_link_by_longname_id tools/perf/util/dsos.c:106:12
#4 0x55a96a6a851e in __dsos__findnew_by_longname_id tools/perf/util/dsos.c:178:9
#5 0x55a96a6a7798 in __dsos__find_id tools/perf/util/dsos.c:191:9
#6 0x55a96a6a7b57 in __dsos__findnew_id tools/perf/util/dsos.c:251:20
#7 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17
#8 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9
#9 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10
#10 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8
#11 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9
#12 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9
#13 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9
#14 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7
#15 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9
#16 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3
#17 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#18 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#19 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#20 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#21 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#22 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
#23 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4
#24 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9
#25 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11
#26 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8
#27 0x55a96a284097 in run_argv tools/perf/perf.c:408:2
#28 0x55a96a282223 in main tools/perf/perf.c:538:3
Uninitialized value was stored to memory at
#1 0x55a96a6a18f7 in dso__new_id tools/perf/util/dso.c:1230:14
#2 0x55a96a6a78ee in __dsos__addnew_id tools/perf/util/dsos.c:233:20
#3 0x55a96a6a7bcc in __dsos__findnew_id tools/perf/util/dsos.c:252:21
#4 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17
#5 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9
#6 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10
#7 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8
#8 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9
#9 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9
#10 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9
#11 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7
#12 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9
#13 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3
#14 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#15 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#16 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#17 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#18 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#19 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
Uninitialized value was stored to memory at
#0 0x55a96a7725af in machine__process_mmap2_event tools/perf/util/machine.c:1646:25
#1 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9
#2 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9
#3 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9
#4 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7
#5 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9
#6 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3
#7 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#8 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#9 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#10 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#11 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#12 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
#13 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4
#14 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9
#15 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11
#16 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8
#17 0x55a96a284097 in run_argv tools/perf/perf.c:408:2
#18 0x55a96a282223 in main tools/perf/perf.c:538:3
Uninitialized value was created by a heap allocation
#0 0x55a96a22f60d in malloc llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:925:3
#1 0x55a96a882948 in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:655:15
#2 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#3 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#4 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#5 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#6 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#7 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
#8 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4
#9 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9
#10 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11
#11 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8
#12 0x55a96a284097 in run_argv tools/perf/perf.c:408:2
#13 0x55a96a282223 in main tools/perf/perf.c:538:3
SUMMARY: MemorySanitizer: use-of-uninitialized-value tools/perf/util/dsos.c:23:6 in __dso_id__cmp
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200313053129.131264-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Correct maxnode parameter value passed to mbind() syscall to be the
amount of node mask bits to analyze plus 1. Dynamically allocate node
mask memory depending on the index of node of cpu being profiled.
Fixes: c44a8b44ca9f ("perf record: Bind the AIO user space buffers to nodes")
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c7ea8ffe-1357-bf9e-3a89-1da1d8e9b75b@linux.intel.com
[ Remove leftover nr_bits + 1 comment in mbind() call ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The variable 'offset' in function cs_etm__sample() is u64 type, it's not
appropriate to check it with 'while (offset > 0)'; this patch changes to
'while (offset)'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If an instruction range packet can generate multiple instruction
samples, these samples share the same last branches; it's not necessary
to copy the same last branches repeatedly for these samples within the
same packet.
This patch moves out the last branches copying from function
cs_etm__synth_instruction_sample(), and execute it prior to generating
instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When 'etm->instructions_sample_period' is less than
'tidq->period_instructions', the function cs_etm__sample() cannot handle
this case properly with its logic.
Let's see below flow as an example:
- If we set itrace option '--itrace=i4', then function cs_etm__sample()
has variables with initialized values:
tidq->period_instructions = 0
etm->instructions_sample_period = 4
- When the first packet is coming:
packet->instr_count = 10; the number of instructions executed in this
packet is 10, thus update period_instructions as below:
tidq->period_instructions = 0 + 10 = 10
instrs_over = 10 - 4 = 6
offset = 10 - 6 - 1 = 3
tidq->period_instructions = instrs_over = 6
- When the second packet is coming:
packet->instr_count = 10; in the second pass, assume 10 instructions
in the trace sample again:
tidq->period_instructions = 6 + 10 = 16
instrs_over = 16 - 4 = 12
offset = 10 - 12 - 1 = -3 -> the negative value
tidq->period_instructions = instrs_over = 12
So after handle these two packets, there have below issues:
The first issue is that cs_etm__instr_addr() returns the address within
the current trace sample of the instruction related to offset, so the
offset is supposed to be always unsigned value. But in fact, function
cs_etm__sample() might calculate a negative offset value (in handling
the second packet, the offset is -3) and pass to cs_etm__instr_addr()
with u64 type with a big positive integer.
The second issue is it only synthesizes 2 samples for sample period = 4.
In theory, every packet has 10 instructions so the two packets have
total 20 instructions, 20 instructions should generate 5 samples
(4 x 5 = 20). This is because cs_etm__sample() only calls once
cs_etm__synth_instruction_sample() to generate instruction sample per
range packet.
This patch fixes the logic in function cs_etm__sample(); the basic
idea for handling coming packet is:
- To synthesize the first instruction sample, it combines the left
instructions from the previous packet and the head of the new
packet; then generate continuous samples with sample period;
- At the tail of the new packet, if it has the rest instructions,
these instructions will be left for the sequential sample.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Every time synthesize instruction sample, the last branch recording will
be reset. This is fine if the instruction period is big enough, for
example if use the option '--itrace=i100000', the last branch array is
reset for every sample with 100000 instructions per period; before
generate the next instruction sample, there has the sufficient packets
coming to fill the last branch array.
On the other hand, if set a very small period, the packets will be
significantly reduced between two continuous instruction samples, thus
the last branch array is almost empty for new instruction sample by
frequently resetting.
To allow the last branches to work properly for any instruction periods,
this patch avoids to reset the last branch for every instruction sample
and only reset it when flush the trace data. The last branches will be
reset only for two cases, one is for trace starting, another case is for
discontinuous trace; other cases can keep recording last branches for
continuous instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If use option '--itrace=iNNN' with Arm CoreSight trace data, perf tool
fails inject instruction samples; the root cause is the packets are only
swapped for branch samples and last branches but not for instruction
samples, so the new coming packets cannot be properly handled for only
synthesizing instruction samples.
To fix this issue, this patch refactors the code with a new function
cs_etm__packet_swap() which is used to swap packets and adds the
condition for instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
And add the '/' to avoid looking at things like "/system/libsomething",
when all we want to know if it is like "/system/lib/something", i.e. if
it is in that system library dir.
Using strstarts() avoids off-by-one errors like recently fixed in this
file.
Since this adds the '/' I separated this patch, another patch will make
this consistent by removing other strncmp(str, prefix, manually
calculated prefix length) usage.
Reported-by: Dominik Czarnota <dominik.b.czarnota@gmail.com>
Acked-by: Dominik Czarnota <dominik.b.czarnota@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: Link: http://lore.kernel.org/lkml/CABEVAa0_q-uC0vrrqpkqRHy_9RLOSXOJxizMLm1n5faHRy2AeA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some metric groups have metric constraints. A metric group can be
scheduled as a group only when some constraints are applied. For
example, Page_Walks_Utilization has a metric constraint,
"NO_NMI_WATCHDOG".
When NMI watchdog is disabled, the metric group can be scheduled as a
group. Otherwise, splitting the metric group into standalone metrics.
Add a new function, metricgroup__has_constraint(), to check whether all
constraints are applied. If not, splitting the metric group into
standalone metrics.
Currently, only one constraint, "NO_NMI_WATCHDOG", is checked. Print a
warning for the metric group with the constraint, when NMI WATCHDOG is
enabled.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The NMI watchdog status is required for metric group constraint
examination. Factor out sysctl__nmi_watchdog_enabled() to retrieve the
NMI watchdog status.
Users may count more than one metric group each time. If so, the NMI
watchdog status may be retrieved several times. To reduce the overhead,
cache the NMI watchdog status.
Replace the NMI watchdog status checking in print_footer() by
sysctl__nmi_watchdog_enabled().
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out metricgroup__add_metric_weak_group() which add metrics into a
weak group. The change can improve code readability. Because following
patch will introduce a function which add standalone metrics.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It would be nice to print the block percents with colors.
This patch supports the 'Sampled Cycles%' and 'Avg Cycles%' printed in
colors.
For example,
perf record -b ...
perf report --total-cycles or perf report --total-cycles --stdio
percent > 5%, colored in red
percent > 0.5%, colored in green
percent < 0.5%, default color
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we use a predefined array to set the block info output
formats, it's fixed and inflexible.
This patch adds two parameters "block_hpps" and "nr_hpps" in
block_info__create_report and other static functions, in order to let
user decide which columns to report and with specified report ordering.
It should be more flexible.
Buffers will be allocated to contain the new fmts, of course, we need to
release them before perf exits.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf diff' uses block_pair_cmp() to compare two blocks. But
block_info__cmp() has the similar functionality and it's a bit more
complete.
This patch removes block_pair_cmp() and uses __block_info__cmp()
instead. __block_info__cmp() is wrapped by block_info__cmp() and it
doesn't receives a perf_hpp_fmt parameter.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 6041441870ab ("perf block: Cleanup and refactor block info
functions") introduces block_info__cmp(), which compares two blocks.
But the issues are:
1. It should return the strcmp cmp value only if it's not 0.
2. When symbol names are matched, we need to compare the addresses
of blocks further. But it wrongly uses the symbol addresses for
comparison.
3. If the syms are both NULL, we can't consider these two blocks are
matched.
This patch fixes above 3 issues.
Fixes: 6041441870ab ("perf block: Cleanup and refactor block info functions")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To match the error value of the expr__find_other function, so all
exported expr functions return the same values:
0 on success, -1 on error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that we have a flex parser we don't need to update the parsed string
pointer, so the interface can just be passed the pointer to the
expression instead of a pointer to pointer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
variables
We have metrics that define more than 15 variables, like
Branch_Misprediction_Cost. Increasing the allowed variables count to 20.
As Andy pointed out, we can't go too high in here, because some of the
code has O(n^2) complexity (already_seen) and we might want to do some
other changes (like using hash tables) before increasing the maximum
even more.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding expr flex code instead of the manual parser code. So it's easily
extensible in upcoming changes.
The new flex code is in flex.l object and gets compiled like all the
other flexers we use. It's defined as flex reentrant parser.
It's used by both expr__parse and expr__find_other interfaces by
separating the starting point.
There's no intended change of functionality ;-) the test expr is
passing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add generic expr code into new expr.c object.
The expr.c object will be mainly used in following change that will get
rid of the manual flex code,
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf.data may be generated by a newer version of perf tool, which
support new input bits in attr, e.g. new bit for branch_sample_type.
The perf.data may be parsed by an older version of perf tool later. The
old perf tool may parse the perf.data incorrectly. There is no warning
message for this case.
Current perf header never check for unknown input bits in attr.
When read the event desc from header, check the stored event attr. The
reserved bits, sample type, read format and branch sample type will be
checked.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lkml.kernel.org/r/20200228163011.19358-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A new branch sample type PERF_SAMPLE_BRANCH_HW_INDEX has been introduced
in latest kernel.
Enable HW_INDEX by default in LBR call stack mode.
If kernel doesn't support the sample type, switching it off.
Add HW_INDEX in attr_fprintf as well. User can check whether the branch
sample type is set via debug information or header.
Committer testing:
First collect some samples with LBR callchains, system wide, for a few
seconds:
# perf record --call-graph lbr -a sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.625 MB perf.data (224 samples) ]
#
Now lets use 'perf evlist -v' to look at the branch_sample_type:
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES|HW_INDEX
#
So the machine has the kernel feature, and it was correctly added to
perf_event_attr.branch_sample_type, for the default 'cycles' event.
If we do it in another machine, where the kernel lacks the HW_INDEX
feature, we get:
# perf record --call-graph lbr -a sleep 2s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.690 MB perf.data (499 samples) ]
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES
#
No HW_INDEX in attr.branch_sample_type.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200228163011.19358-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The low level index of raw branch records for the most recent branch can
be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX
branch_sample_type. Extend struct branch_stack to support it.
However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and
entries[] will be output by kernel. The pointer of entries[] could be
wrong, since the output format is different with new struct
branch_stack. Add a variable no_hw_idx in struct perf_sample to
indicate whether the hw_idx is output. Add get_branch_entry() to return
corresponding pointer of entries[0].
To make dummy branch sample consistent as new branch sample, add hw_idx
in struct dummy_branch_stack for cs-etm and intel-pt.
Apply the new struct branch_stack for synthetic events as well.
Extend test case sample-parsing to support new struct branch_stack.
Committer notes:
Renamed get_branch_entries() to perf_sample__branch_entries() to have
proper namespacing and pave the way for this to be moved to libperf,
eventually.
Add 'static' to that inline as it is in a header.
Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build
on arm64.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Do not depend on dwfl_module_addrsym() because it can fail on user-space
shared libraries.
Actually, same bug was fixed by commit 664fee3dc379 ("perf probe: Do not
use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit
07d369857808 ("perf probe: Fix wrong address verification) reverted to
get actual symbol address from symtab.
This fixes it again by getting symbol address from DIE, and only if the
DIE has only address range, it uses dwfl_module_addrsym().
Fixes: 07d369857808 ("perf probe: Fix wrong address verification)
Reported-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we put an event with multiple probes, perf-probe fails to delete
with filters. This comes from a failure to list up the event name
because of overwrapping its name.
To fix this issue, skip to list up the event which has same name.
Without this patch:
# perf probe -l \*
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:21@
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:25@
probe_perf:map__map_ip (on append_inlines:12@util/machine.c in
probe_perf:map__map_ip (on unwind_entry:19@util/machine.c in /
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
# perf probe -d \*
"*" does not hit any event.
Error: Failed to delete events. Reason: No such file or directory (Code: -2)
With it:
# perf probe -d \*
Removed event: probe_perf:map__map_ip
#
Fixes: 72363540c009 ("perf probe: Support multiprobe event")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158287666197.16697.7514373548551863562.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ADD_CONFIG_TERM accesses term->weak, however, in get_config_chgs this
value is accessed outside of the list_for_each_entry and references
invalid memory. Add an argument for ADD_CONFIG_TERM for weak and set it
to false in the get_config_chgs case.
This bug was cause by clang's address sanitizer and libfuzzer. It can be
reproduced with a command line of:
perf stat -a -e i/bs,tsc,L2/o
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200307073121.203816-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, the setup.py script detects the clang compiler only when invoked
with CC=clang. But when using a specific version (e.g. CC=clang-11), this
doesn't work correctly and wrong compiler flags are set, leading to build
errors.
To properly detect clang, invoke the compiler with -v and check the output.
The first line should start with "clang version ...".
Committer testing:
$ make CC=clang-9 O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
$ readelf -wi /tmp/build/perf/python/perf.cpython-37m-x86_64-linux-gnu.so | grep DW_AT_producer | head -1
<c> DW_AT_producer : (indirect string, offset: 0x0): clang version 9.0.1 (Fedora 9.0.1-2.fc31) /usr/bin/clang-9 -Wno-unused-result -Wsign-compare -D DYNAMIC_ANNOTATIONS_ENABLED=1 -D NDEBUG -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-command-line -m64 -mtune=generic -fasynchronous-unwind-tables -fcf-protection=full -D _GNU_SOURCE -fPIC -fwrapv -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wshadow -D HAVE_ARCH_X86_64_SUPPORT -I /tmp/build/perf/arch/x86/include/generated -D HAVE_SYSCALL_TABLE_SUPPORT -D HAVE_PERF_REGS_SUPPORT -D HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET -Werror -O3 -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 -fstack-protector-all -D _FORTIFY_SOURCE=2 -D _LARGEFILE64_SOURCE -D _FILE_OFFSET_BITS=64 -D _GNU_SOURCE -I /home/acme/git/perf/tools/lib/perf/include -I /home/acme/git/perf/tools/perf/util/include -I /home/acme/git/perf/tools/perf/arch/x86/include -I /home/acme/git/perf/tools/include/ -I /home/acme/git/perf/tools/arch/x86/include/uapi -I /home/acme/git/perf/tools/include/uapi -I /home/acme/git/perf/tools/arch/x86/include/ -I /home/acme/git/perf/tools/arch/x86/ -I /tmp/build/perf//util -I /tmp/build/perf/ -I /home/acme/git/perf/tools/perf/util -I /home/acme/git/perf/tools/perf -I /home/acme/git/perf/tools/lib/ -D HAVE_PTHREAD_ATTR_SETAFFINITY_NP -D HAVE_PTHREAD_BARRIER -D HAVE_EVENTFD -D HAVE_GET_CURRENT_DIR_NAME -D HAVE_GETTID -D HAVE_DWARF_GETLOCATIONS_SUPPORT -D HAVE_GLIBC_SUPPORT -D HAVE_AIO_SUPPORT -D HAVE_SCHED_GETCPU_SUPPORT -D HAVE_SETNS_SUPPORT -D HAVE_LIBELF_SUPPORT -D HAVE_LIBELF_MMAP_SUPPORT -D HAVE_ELF_GETPHDRNUM_SUPPORT -D HAVE_GELF_GETNOTE_SUPPORT -D HAVE_ELF_GETSHDRSTRNDX_SUPPORT -D HAVE_DWARF_SUPPORT -D HAVE_LIBBPF_SUPPORT -D HAVE_BPF_PROLOGUE -D HAVE_SDT_EVENT -D HAVE_JITDUMP -D HAVE_DWARF_UNWIND_SUPPORT -D NO_LIBUNWIND_DEBUG_FRAME -D HAVE_LIBUNWIND_SUPPORT -D HAVE_LIBCRYPTO_SUPPORT -D HAVE_SLANG_SUPPORT -D HAVE_GTK2_SUPPORT -D NO_LIBPERL -D HAVE_TIMERFD_SUPPORT -D HAVE_LIBPYTHON_SUPPORT -D HAVE_CPLUS_DEMANGLE_SUPPORT -D HAVE_LIBBFD_SUPPORT -D HAVE_ZLIB_SUPPORT -D HAVE_LZMA_SUPPORT -D HAVE_ZSTD_SUPPORT -D HAVE_LIBCAP_SUPPORT -D HAVE_BACKTRACE_SUPPORT -D HAVE_LIBNUMA_SUPPORT -D HAVE_KVM_STAT_SUPPORT -D DISASM_FOUR_ARGS_SIGNATURE -D HAVE_LIBBABELTRACE_SUPPORT -D HAVE_AUXTRACE_SUPPORT -D HAVE_JVMTI_CMLR -I /tmp/build/perf/ -fPIC -I util/include -I /usr/include/python3.7m -c /home/acme/git/perf/tools/perf/util/python.c -o /tmp/build/perf/python_ext_build/tmp/home/acme/git/perf/tools/perf/util/python.o -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wshadow -D HAVE_ARCH_X86_64_SUPPORT -I /tmp/build/perf/arch/x86/include/generated -D HAVE_SYSCALL_TABLE_SUPPORT -D HAVE_PERF_REGS_SUPPORT -D HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET -Werror -O3 -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 -fstack-protector-all -D _FORTIFY_SOURCE=2 -D _LARGEFILE64_SOURCE -D _FILE_OFFSET_BITS=64 -D _GNU_SOURCE -I /home/acme/git/perf/tools/lib/perf/include -I /home/acme/git/perf/tools/perf/util/include -I /home/acme/git/perf/tools/perf/arch/x86/include -I /home/acme/git/perf/tools/include/ -I /home/acme/git/perf/tools/arch/x86/include/uapi -I /home/acme/git/perf/tools/include/uapi -I /home/acme/git/perf/tools/arch/x86/include/ -I /home/acme/git/perf/tools/arch/x86/ -I /tmp/build/perf//util -I /tmp/build/perf/ -I /home/acme/git/perf/tools/perf/util -I /home/acme/git/perf/tools/perf -I /home/acme/git/perf/tools/lib/ -D HAVE_PTHREAD_ATTR_SETAFFINITY_NP -D HAVE_PTHREAD_BARRIER -D HAVE_EVENTFD -D HAVE_GET_CURRENT_DIR_NAME -D HAVE_GETTID -D HAVE_DWARF_GETLOCATIONS_SUPPORT -D HAVE_GLIBC_SUPPORT -D HAVE_AIO_SUPPORT -D HAVE_SCHED_GETCPU_SUPPORT -D HAVE_SETNS_SUPPORT -D HAVE_LIBELF_SUPPORT -D HAVE_LIBELF_MMAP_SUPPORT -D HAVE_ELF_GETPHDRNUM_SUPPORT -D HAVE_GELF_GETNOTE_SUPPORT -D HAVE_ELF_GETSHDRSTRNDX_SUPPORT -D HAVE_DWARF_SUPPORT -D HAVE_LIBBPF_SUPPORT -D HAVE_BPF_PROLOGUE -D HAVE_SDT_EVENT -D HAVE_JITDUMP -D HAVE_DWARF_UNWIND_SUPPORT -D NO_LIBUNWIND_DEBUG_FRAME -D HAVE_LIBUNWIND_SUPPORT -D HAVE_LIBCRYPTO_SUPPORT -D HAVE_SLANG_SUPPORT -D HAVE_GTK2_SUPPORT -D NO_LIBPERL -D HAVE_TIMERFD_SUPPORT -D HAVE_LIBPYTHON_SUPPORT -D HAVE_CPLUS_DEMANGLE_SUPPORT -D HAVE_LIBBFD_SUPPORT -D HAVE_ZLIB_SUPPORT -D HAVE_LZMA_SUPPORT -D HAVE_ZSTD_SUPPORT -D HAVE_LIBCAP_SUPPORT -D HAVE_BACKTRACE_SUPPORT -D HAVE_LIBNUMA_SUPPORT -D HAVE_KVM_STAT_SUPPORT -D DISASM_FOUR_ARGS_SIGNATURE -D HAVE_LIBBABELTRACE_SUPPORT -D HAVE_AUXTRACE_SUPPORT -D HAVE_JVMTI_CMLR -I /tmp/build/perf/ -fno-strict-aliasing -Wno-write-strings -Wno-unused-parameter -Wno-redundant-decls
$
And here is how tools/perf/util/setup.py checks if the used clang has
options that the distro specific python extension building compiler
defaults:
if cc_is_clang:
from distutils.sysconfig import get_config_vars
vars = get_config_vars()
for var in ('CFLAGS', 'OPT'):
vars[var] = sub("-specs=[^ ]+", "", vars[var])
if not clang_has_option("-mcet"):
vars[var] = sub("-mcet", "", vars[var])
if not clang_has_option("-fcf-protection"):
vars[var] = sub("-fcf-protection", "", vars[var])
if not clang_has_option("-fstack-clash-protection"):
vars[var] = sub("-fstack-clash-protection", "", vars[var])
if not clang_has_option("-fstack-protector-strong"):
vars[var] = sub("-fstack-protector-strong", "", vars[var])
So "-fcf-protection=full" is used, clang-9 has this option and thus it
was kept, the perf python extension was built with it and the build
completed successfully.
Link: https://github.com/ClangBuiltLinux/linux/issues/903
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200309085618.14307-1-ilie.halip@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang warns:
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string
comparison function instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/map.c:434:15: error: result of comparison against a string literal
is unspecified (use an explicit string comparison function instead)
[-Werror,-Wstring-compare]
if (srcline != SRCLINE_UNKNOWN)
^ ~~~~~~~~~~~~~~~
Reviewer Notes:
Looks good to me. Some more context:
https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare
The spec says:
J.1 Unspecified behavior
The following are unspecified:
.. Whether two string literals result in distinct arrays (6.4.5).
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/900
Link: http://lore.kernel.org/lkml/20200223193456.25291-1-nick.desaulniers@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'nr_jumps' field in 'struct annotation' is not used since it's
inception in commit 2402e4a936a0 ("perf annotate browser: Show 'jumpy'
functions"). Get rid of it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-7-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To help in debugging, add this extra message:
detect_kbuild_dir: Couldn't find "/lib/modules/5.4.20-200.fc31.x86_64/build/include/generated/autoconf.h", missing kernel-devel package?.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We have supported the event modifier "percore" which sums up the event
counts for all hardware threads in a core and show the counts per core.
For example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A -- sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 395,072 cpu/event=cpu-cycles,percore/
S0-D0-C1 851,248 cpu/event=cpu-cycles,percore/
S0-D0-C2 954,226 cpu/event=cpu-cycles,percore/
S0-D0-C3 1,233,659 cpu/event=cpu-cycles,percore/
This patch provides a new option "--percore-show-thread". It is used
with event modifier "percore" together to sum up the event counts for
all hardware threads in a core but show the counts per hardware thread.
This is essentially a replacement for the any bit (which is gone in
Icelake). Per core counts are useful for some formulas, e.g. CoreIPC.
The original percore version was inconvenient to post process. This
variant matches the output of the any bit.
With this patch, for example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1
Performance counter stats for 'system wide':
CPU0 2,453,061 cpu/event=cpu-cycles,percore/
CPU1 1,823,921 cpu/event=cpu-cycles,percore/
CPU2 1,383,166 cpu/event=cpu-cycles,percore/
CPU3 1,102,652 cpu/event=cpu-cycles,percore/
CPU4 2,453,061 cpu/event=cpu-cycles,percore/
CPU5 1,823,921 cpu/event=cpu-cycles,percore/
CPU6 1,383,166 cpu/event=cpu-cycles,percore/
CPU7 1,102,652 cpu/event=cpu-cycles,percore/
We can see counts are duplicated in CPU pairs (CPU0/CPU4, CPU1/CPU5,
CPU2/CPU6, CPU3/CPU7).
The interval mode also works. For example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -I 1000
# time CPU counts unit events
1.000425421 CPU0 925,032 cpu/event=cpu-cycles,percore/
1.000425421 CPU1 430,202 cpu/event=cpu-cycles,percore/
1.000425421 CPU2 436,843 cpu/event=cpu-cycles,percore/
1.000425421 CPU3 1,192,504 cpu/event=cpu-cycles,percore/
1.000425421 CPU4 925,032 cpu/event=cpu-cycles,percore/
1.000425421 CPU5 430,202 cpu/event=cpu-cycles,percore/
1.000425421 CPU6 436,843 cpu/event=cpu-cycles,percore/
1.000425421 CPU7 1,192,504 cpu/event=cpu-cycles,percore/
If we offline CPU5, the result is:
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1
Performance counter stats for 'system wide':
CPU0 2,752,148 cpu/event=cpu-cycles,percore/
CPU1 1,009,312 cpu/event=cpu-cycles,percore/
CPU2 2,784,072 cpu/event=cpu-cycles,percore/
CPU3 2,427,922 cpu/event=cpu-cycles,percore/
CPU4 2,752,148 cpu/event=cpu-cycles,percore/
CPU6 2,784,072 cpu/event=cpu-cycles,percore/
CPU7 2,427,922 cpu/event=cpu-cycles,percore/
1.001416041 seconds time elapsed
v4:
---
Ravi Bangoria reports an issue in v3. Once we offline a CPU,
the output is not correct. The issue is we should use the cpu
idx in print_percore_thread rather than using the cpu value.
v3:
---
1. Fix the interval mode output error
2. Use cpu value (not cpu index) in config->aggr_get_id().
3. Refine the code according to Jiri's comments.
v2:
---
Add the explanation in change log. This is essentially a replacement
for the any bit. No code change.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200214080452.26402-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move it from tools/perf/util/cgroup.c as it can be used by other places.
Note that cgroup filesystem is different from others since it's usually
mounted separately (in v1) for each subsystem.
I just copied the code with a little modification to pass a name of
subsystem.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200127100031.1368732-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang warns:
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string
comparison function instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/map.c:434:15: error: result of comparison against a string literal
is unspecified (use an explicit string comparison function instead)
[-Werror,-Wstring-compare]
if (srcline != SRCLINE_UNKNOWN)
^ ~~~~~~~~~~~~~~~
Reviewer Notes:
Looks good to me. Some more context:
https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare
The spec says:
J.1 Unspecified behavior
The following are unspecified:
.. Whether two string literals result in distinct arrays (6.4.5).
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/900
Link: http://lore.kernel.org/lkml/20200223193456.25291-1-nick.desaulniers@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dso->kernel value is now set to everything that is in
machine->kmaps, but that was being used to decide if vmlinux lookup is
needed, which ended up making that lookup be made for kernel modules,
that now have dso->kernel set, leading to these kinds of warnings when
running on a machine with compressed kernel modules, like fedora:31:
[root@five ~]# perf record -F 10000 -a sleep 2
[ perf record: Woken up 1 times to write data ]
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
[ perf record: Captured and wrote 1.024 MB perf.data (1366 samples) ]
[root@five ~]#
This happens when collecting the buildid, when we find samples for
kernel modules, fix it by checking if the looked up DSO is a kernel
module by other means.
Fixes: 02213cec64bb ("perf maps: Mark module DSOs with kernel type")
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200302191007.GD10335@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make the code more compact by using asprintf() instead of malloc()+strncpy() which also uses
less memory and avoids these warnings with gcc 10:
CC /tmp/build/perf/util/cloexec.o
In file included from /usr/include/string.h:495,
from util/parse-events.h:12,
from util/parse-events.c:18:
In function ‘strncpy’,
inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:271:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘sys_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/dirent.h:61,
from util/parse-events.c:5:
util/parse-events.c: In function ‘tracepoint_id_to_path’:
/usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here
33 | char d_name[256]; /* We must not include limits.h! */
| ^~~~~~
In file included from /usr/include/string.h:495,
from util/parse-events.h:12,
from util/parse-events.c:18:
In function ‘strncpy’,
inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:273:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘evt_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/dirent.h:61,
from util/parse-events.c:5:
util/parse-events.c: In function ‘tracepoint_id_to_path’:
/usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here
33 | char d_name[256]; /* We must not include limits.h! */
| ^~~~~~
CC /tmp/build/perf/util/call-path.o
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200302145535.GA28183@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.
While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.
Noticed in fedora rawhide running with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While rendering annotate browser from perf report tui, we keep track
of total number of lines(asm + source) in annotation->nr_entries and
total number of asm lines in annotation->nr_asm_entries. But we don't
reset them before starting. Thus if user annotates same function
multiple times, we restart incrementing these fields with old values.
This causes a segfault when user tries to toggle source code after
annotating same function multiple times. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-5-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
