summaryrefslogtreecommitdiff
path: root/tools/perf/util/sort.h
AgeCommit message (Collapse)Author
2020-12-19perf sort: Add sort option for data page sizeKan Liang
Add a new sort option "data_page_size" for --mem-mode sort. With this option applied, perf can sort and report by sample's data page size. Here is an example: perf report --stdio --mem-mode --sort=comm,symbol,phys_daddr,data_page_size # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 9K of event 'mem-loads:uP' # Total weight : 9028 # Sort order : comm,symbol,phys_daddr,data_page_size # # Overhead Command Symbol Data Physical # Address # Data Page Size # ........ ....... ............................ # ...................... ...................... # 11.19% dtlb [.] touch_buffer [.] 0x00000003fec82ea8 4K 8.61% dtlb [.] GetTickCount [.] 0x00000003c4f2c8a8 4K 4.52% dtlb [.] GetTickCount [.] 0x00000003fec82f58 4K 4.33% dtlb [.] __gettimeofday [.] 0x00000003fec82f48 4K 4.32% dtlb [.] GetTickCount [.] 0x00000003fec82f78 4K 4.28% dtlb [.] GetTickCount [.] 0x00000003fec82f50 4K 4.23% dtlb [.] GetTickCount [.] 0x00000003fec82f70 4K 4.11% dtlb [.] GetTickCount [.] 0x00000003fec82f68 4K 4.00% dtlb [.] Calibrate [.] 0x00000003fec82f98 4K 3.91% dtlb [.] Calibrate [.] 0x00000003fec82f90 4K 3.43% dtlb [.] touch_buffer [.] 0x00000003fec82e98 4K 3.42% dtlb [.] touch_buffer [.] 0x00000003fec82e90 4K 0.09% dtlb [.] DoDependentLoads [.] 0x000000036ea084c0 2M 0.08% dtlb [.] DoDependentLoads [.] 0x000000032b010b80 2M Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/20201216185805.9981-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-18perf hist: Add fast path for duplicate entries checkKan Liang
Perf checks the duplicate entries in a callchain before adding an entry. However the check is very slow especially with deeper call stack. Almost ~50% elapsed time of perf report is spent on the check when the call stack is always depth of 32. The hist_entry__cmp() is used to compare the new entry with the old entries. It will go through all the available sorts in the sort_list, and call the specific cmp of each sort, which is very slow. Actually, for most cases, there are no duplicate entries in callchain. The symbols are usually different. It's much faster to do a quick check for symbols first. Only do the full cmp when the symbols are exactly the same. The quick check is only to check symbols, not dso. Export _sort__sym_cmp. $ perf record --call-graph lbr ./tchain_edit_64 Without the patch $time perf report --stdio real 0m21.142s user 0m21.110s sys 0m0.033s With the patch $time perf report --stdio real 0m10.977s user 0m10.948s sys 0m0.027s Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-18-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf report: Add 'cgroup' sort keyNamhyung Kim
The cgroup sort key is to show cgroup membership of each task. Currently it shows full path in the cgroupfs (not relative to the root of cgroup namespace) since it'd be more intuitive IMHO. Otherwise root cgroup in different namespaces will all show same name - "/". The cgroup sort key should come before cgroup_id otherwise sort_dimension__add() will match it to cgroup_id as it only matches with the given substring. For example it will look like following. Note that record patch adding --all-cgroups patch will come later. $ perf record -a --namespace --all-cgroups cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.208 MB perf.data (4090 samples) ] $ perf report -s cgroup_id,cgroup,pid ... # Overhead cgroup id (dev/inode) Cgroup Pid:Command # ........ ..................... .......... ............... # 93.96% 0/0x0 / 0:swapper 1.25% 3/0xeffffffb / 278:looper0 0.86% 3/0xf000015f /sub/cgrp1 280:cgtest 0.37% 3/0xf0000160 /sub/cgrp2 281:cgtest 0.34% 3/0xf0000163 /sub/cgrp3 282:cgtest 0.22% 3/0xeffffffb /sub 278:looper0 0.20% 3/0xeffffffb / 280:cgtest 0.15% 3/0xf0000163 /sub/cgrp3 285:looper3 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-01-06perf report/top: Improve toggle callchain menu optionArnaldo Carvalho de Melo
Taking into account the current status of the callchain, i.e. if folded, show "Expand", otherwise "Collapse", also show the name of the entry that will be affected and mention the hotkeys for expanding/collapsing all callchains below the main entry, the one that appears with/without callchains. Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-03arm6poo8463k5tfcfp7gkk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-11perf diff: Report noisy for cycles diffJin Yao
This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31perf tools: Move 'struct events_stats' and prototypes to separate headerArnaldo Carvalho de Melo
This will allow us to untangle the header dependency a bit more, as some places will not need event.h anymore. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-enqncj29ovzaat3cd9203rwl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26perf sort: Remove needless headers from sort.h, provide fwd struct declsArnaldo Carvalho de Melo
Reducing the includes hell a bit more, speeding up the build and avoiding needless rebuilds when just one of those files gets updated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-u63el2vqsovsmnhebx1rcixo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26perf cacheline: Move cacheline related routines to separate filesArnaldo Carvalho de Melo
To disentangle util/sort.h a bit more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-6kbf2cauas06rbqp15pyter5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf evlist: Rename struct perf_evlist to struct evlistJiri Olsa
Rename struct perf_evlist to struct evlist, so we don't have a name clash when we add struct perf_evlist in libperf. Committer notes: Added fixes to build on arm64, from Jiri and from me (tools/perf/util/cs-etm.c) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-02perf diff: Use hists to manage basic blocks per symbolJin Yao
The hist__account_cycles() can account cycles per basic block. The basic block information is saved in cycles_hist structure. This patch processes each symbol, get basic blocks from cycles_hist and add the basic block entries to a new hists (in 'struct block_hist'). Using a hists is because we need to compare, sort and print the basic blocks later. v6: --- Since 'ops' argument is removed from hists__add_entry_block, update the code accordingly. No functional change. v5: --- Since now we still carry block_info in 'struct hist_entry' we don't need to use our own new/free ops for hist entries. And the block_info is released in hist_entry__delete. v3: --- 1. In v2, we put block stuffs in 'struct hist_entry', but it's not a good design. In v3, we create a new 'struct block_hist' and cast the 'struct hist_entry' to 'struct block_hist' in some places, which can avoid adding new stuffs in 'struct hist_entry'. 2. abs() -> labs(), in block_cycles_diff_cmp(). v2: --- v1 adds the basic block entries to per data-file hists but v2 adds the basic block entries to per symbol hists. That is to keep current perf-diff format. Will show the result in next patches. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-02perf hists: Add block_info in hist_entryJin Yao
The block_info contains the program basic block information, i.e, contains the start address and the end address of this basic block and how much cycles it takes. We need to compare, sort and even print out the basic block by some orders, i.e. sort by cycles. For this purpose, we add block_info field to hist_entry. In order not to impact current interface, we creates a new function hists__add_entry_block. v6: --- Remove the 'ops' argument in hists__add_entry_block Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1561713784-30533-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19perf report: Show all sort keys in help outputAndi Kleen
Show all the supported sort keys in the command line help output, so that it's not needed to refer to the manpage. Before: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list. After: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ... Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11perf report: Implement browsing of individual samplesAndi Kleen
Now 'perf report' can show whole time periods with 'perf script', but the user still has to find individual samples of interest manually. It would be expensive and complicated to search for the right samples in the whole perf file. Typically users only need to look at a small number of samples for useful analysis. Also the full scripts tend to show samples of all CPUs and all threads mixed up, which can be very confusing on larger systems. Add a new --samples option to save a small random number of samples per hist entry. Use a reservoir sample technique to select a representatve number of samples. Then allow browsing the samples using 'perf script' as part of the hist entry context menu. This automatically adds the right filters, so only the thread or cpu of the sample is displayed. Then we use less' search functionality to directly jump the to the time stamp of the selected sample. It uses different menus for assembler and source display. Assembler needs xed installed and source needs debuginfo. Currently it only supports as many samples as fit on the screen due to some limitations in the slang ui code. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190311174605.GA29294@tassilo.jf.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11perf report: Support time sort keyAndi Kleen
Add a time sort key to perf report to display samples for different time quantums separately. This allows easier analysis of workloads that change over time, and also will allow looking at the context of samples. % perf record ... % perf report --sort time,overhead,symbol --time-quantum 1ms --stdio ... 0.67% 277061.87300 [.] _dl_start 0.50% 277061.87300 [.] f1 0.50% 277061.87300 [.] f2 0.33% 277061.87300 [.] main 0.29% 277061.87300 [.] _dl_lookup_symbol_x 0.29% 277061.87300 [.] dl_main 0.29% 277061.87300 [.] do_lookup_x 0.17% 277061.87300 [.] _dl_debug_initialize 0.17% 277061.87300 [.] _dl_init_paths 0.08% 277061.87300 [.] check_match 0.04% 277061.87300 [.] _dl_count_modids 1.33% 277061.87400 [.] f1 1.33% 277061.87400 [.] f2 1.33% 277061.87400 [.] main 1.17% 277061.87500 [.] main 1.08% 277061.87500 [.] f1 1.08% 277061.87500 [.] f2 1.00% 277061.87600 [.] main 0.83% 277061.87600 [.] f1 0.83% 277061.87600 [.] f2 1.00% 277061.87700 [.] main Committer notes: Rename 'time' argument to hist_time() to htime to overcome this in older distros: cc1: warnings being treated as errors util/hist.c: In function 'hist_time': util/hist.c:251: error: declaration of 'time' shadows a global declaration /usr/include/time.h:186: error: shadowed declaration is here Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190311144502.15423-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-06perf symbols: Introduce map_symbol.hArnaldo Carvalho de Melo
To allow headers just wanting this definition to be able to get it without all the things in symbol.h, to reduce the include dep tree. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-l32z2qyhs6fe8unf4gk2ead2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-25perf hist: Use cached rbtreesDavidlohr Bueso
At the cost of an extra pointer, we can avoid the O(logN) cost of finding the first element in the tree (smallest node), which is something heavily required for histograms. Specifically, the following are converted to rb_root_cached, and users accordingly: hist::entries_in_array hist::entries_in hist::entries hist::entries_collapsed hist_entry::hroot_in hist_entry::hroot_out Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net [ Added some missing conversions to rb_first_cached() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17perf report: Display average IPC and IPC coverage per symbolJin Yao
Support displaying the average IPC and IPC coverage per symbol in 'perf report' --tui and --stdio modes. For example, $ perf record -b ... $ perf report -s symbol Overhead Symbol IPC [IPC Coverage] 39.60% [.] __random 2.30 [ 54.8%] 18.02% [.] main 0.43 [ 54.3%] 14.21% [.] compute_flag 2.29 [100.0%] 14.16% [.] rand 0.36 [100.0%] 7.06% [.] __random_r 2.57 [ 70.5%] 6.85% [.] rand@plt 0.00 [ 0.0%] Jiri Olsa <jolsa@redhat.com> provided the patch to support the --stdio mode. I merged Jiri's code in this patch. $ perf report -s symbol --stdio # Overhead Symbol IPC [IPC Coverage] # ........ ........................... .................... # 39.60% [.] __random 2.30 [ 54.8%] 18.02% [.] main 0.43 [ 54.3%] 14.21% [.] compute_flag 2.29 [100.0%] 14.16% [.] rand 0.36 [100.0%] 7.06% [.] __random_r 2.57 [ 70.5%] 6.85% [.] rand@plt 0.00 [ 0.0%] 0.02% [k] run_timer_softirq 1.60 [ 57.2%] The columns "IPC" and "[IPC Coverage]" are automatically enabled when the sort-key "symbol" is specified. If the perf.data file doesn't contain timed LBR information, columns are filled with "-". For example, # Overhead Symbol IPC [IPC Coverage] # ........ ........................... .................... # 46.57% [.] main - - 17.60% [.] rand - - 15.84% [.] __random_r - - 11.90% [.] __random - - 6.50% [.] compute_flag - - 1.59% [.] rand@plt - - 0.00% [.] _dl_relocate_object - - 0.00% [k] tlb_flush_mmu - - 0.00% [k] perf_event_mmap - - 0.00% [k] native_sched_clock - - 0.00% [k] intel_pmu_handle_irq_v4 - - 0.00% [k] native_write_msr - - v3: --- Removed the sortkey 'ipc' from command-line. The columns "IPC" and "[IPC Coverage]" are automatically enabled when "symbol" is specified. v2: --- Merge in Jiri's patch to support stdio mode Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1543586097-27632-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-10tools lib traceevent, perf tools: Rename struct pevent to struct tep_handleTzvetomir Stoyanov (VMware)
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes the struct pevent to struct tep_handle. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180659.706175783@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-07perf hists: Make hist_entry__has_callchains() work with 'perf c2c'Arnaldo Carvalho de Melo
Since 'perf c2c' uses 'struct hists' not allocated together with a 'struct perf_evsel' instance, we can't go from a 'struct hist_entry' pointer to a 'struct perf_evsel' via he->hists, so, instead, check if space was set aside for hist_entry->callchain[0] at hist_entry__new() time. Reported-by: Jin Yao <yao.jin@linux.intel.com> Reported-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: fabd37b837f6 ("perf hists: Check if a hist_entry has callchains before using them") Link: https://lkml.kernel.org/n/tip-e8ife8djvvvwmeze3s4yodii@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-07perf hists: Save the callchain_size in struct hist_entryArnaldo Carvalho de Melo
So that we can figure out the real size of the struct and also be able to tell if callchains may be present in this histogram entry. Since we can't always guarantee that from hist_entry->hists we can use hists_to_evsel, to then look at evsel->attr.sample_type for PERF_SAMPLE_CALLCHAIN, like with the 'perf c2c' tool, that uses plain 'struct hists' instances, we need another way of deciding if a specific hist_entry instance has callchains associated with it, i.e. if its hist_entry->callchain[0] has space allocated for. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ptvndealxs1k7myluvu9flnq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-06perf hists: Check if a hist_entry has callchains before using themArnaldo Carvalho de Melo
So far if we use 'perf record -g' this will make symbol_conf.use_callchain 'true' and logic will assume that all events have callchains enabled, but ever since we added the possibility of setting up callchains for some events (e.g.: -e cycles/call-graph=dwarf/) while not for others, we limit usage scenarios by looking at that symbol_conf.use_callchain global boolean, we better look at each event attributes. On the road to that we need to look if a hist_entry has callchains, that is, to go from hist_entry->hists to the evsel that contains it, to then look at evsel->sample_type for PERF_SAMPLE_CALLCHAIN. The next step is to add a symbol_conf.ignore_callchains global, to use in the places where what we really want to know is if callchains should be ignored, even if present. Then -g will mean just to select a callchain mode to be applied to all events not explicitely setting some other callchain mode, i.e. a default callchain mode, and --no-call-graph will set symbol_conf.ignore_callchains with that clear intention. That too will at some point become a per evsel thing, that tools can set for all or just a few of its evsels. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-0sas5cm4dsw2obn75g7ruz69@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-06perf hists: Introduce hist_entry__has_callchain() methodArnaldo Carvalho de Melo
We'll use this helper more frequently when reworking symbol_conf.use_callchain logic, where knowing if a hist_entry has callchains is the important bit, so make going from hist_entry to hists to evsel easier, compact. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-p6gioxkzpkpz71dtt4wcs36o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-04perf srcline: Make hist_entry srcline helper consistent with map'sArnaldo Carvalho de Melo
No need to have "get_srcline", plain hist_entry__srcline() is enough and shorter. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-irhzpfmgdaf6cyk0uqqexoh9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17perf tools: Read the cache line size lazilyArnaldo Carvalho de Melo
It is not read as commonly as 'page_size', so it makes sense to read it lazily, caching its value when it is first read. Less files open unconditionally at startup. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-35xhrq91u94uc1djtclek1ie@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-02perf tools: Add a "dso_size" sort orderKim Phillips
Add DSO size to perf report/top sort output list. This includes adding a map__size fn to map.h, which is approximately equal to the DSO data file_size: DSO file size map (end-start) file / (end-start) libwebkit2gtk-4.0.so.37.24.9 43260072 41295872 95% libglib-2.0.so.0.5400.1 1125680 1118208 99% libc-2.26.so 1960656 1925120 101% libdbus-1.so.3.14.13 309456 303104 102% Sample output: $ ./perf report -s dso_size,dso Samples: 2K of event 'cycles:uppp', Event count (approx.): 128373340 Overhead DSO size Shared Object 90.62% unknown [unknown] 2.87% 1118208 libglib-2.0.so.0.5400.1 1.92% 303104 libdbus-1.so.3.14.13 1.42% 1925120 libc-2.26.so 0.77% 41295872 libwebkit2gtk-4.0.so.37.24.9 0.61% 335872 libgobject-2.0.so.0.5400.1 0.41% 1052672 libgdk-3.so.0.2200.25 0.36% 106496 libpthread-2.26.so 0.29% 221184 dbus-daemon 0.17% 159744 ld-2.26.so 0.13% 49152 libwayland-client.so.0.3.0 0.12% 1642496 libgio-2.0.so.0.5400.1 0.09% 7327744 libgtk-3.so.0.2200.25 0.09% 12324864 libmozjs-52.so.0.0.0 0.05% 4796416 perf 0.04% 843776 libgjs.so.0.0.0 0.03% 1409024 libmutter-clutter-1.so Committer testing: To sort by DSO size, use: # perf report -F dso_size,dso,overhead -s dso_size <SNIP> 3465216 libdns-export.so.174.0.1 0.00% 3522560 libgc.so.1.0.3 0.00% 3538944 libbfd-2.29-13.fc27.so 0.59% 3670016 libunistring.so.2.1.0 0.00% 3723264 libguile-2.0.so.22.8.1 0.00% 3776512 libgio-2.0.so.0.5400.3 0.00% 3891200 libc-2.26.so 0.96% 3944448 libmozjs-17.0.so 0.00% 4218880 libperl.so.5.26.1 0.18% 4452352 libpython2.7.so.1.0 0.02% 4472832 perf 0.02% 4603904 git 0.01% 4751360 libcrypto.so.1.1.0g 0.00% 5005312 libslang.so.2.3.1 0.00% 7315456 libgtk-3.so.0.2200.26 0.09% 8818688 i965_dri.so 2.46% 8818688 i965_dri.so (deleted) 1.26% 12414976 libmozjs-52.so.0.0.0 0.03% 23642112 cc1 2.02% 27889664 [kernel.kallsyms] 25.41% 80834560 libxul.so (deleted) 15.68% 98078720 chrome 32.03% 1056964608 [kernel.kallsyms] 1.59% # Signed-off-by: Kim Phillips <kim.phillips@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180327060956.1c01ebe67a2a941bb4468c6f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-07Merge branch 'linus' into perf/core, to fix conflictsIngo Molnar
Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24perf report: Remove code to handle inline frames from browsersMilian Wolff
The follow-up commits will make inline frames first-class citizens in the callchain, thereby obsoleting all of this special code. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/20171009203310.17362-2-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01perf sort: Add sort option for physical addressKan Liang
Add a new sort option "phys_daddr" for --mem-mode sort. With this option applied, perf can sort and report by sample's physical address. Signed-off-by: Kan Liang <kan.liang@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504026672-7304-3-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Use just forward declarations for struct thread where possibleArnaldo Carvalho de Melo
Removing various instances of unnecessary includes, reducing the maze of header dependencies. Link: http://lkml.kernel.org/n/tip-hwu6eyuok9pc57alookyzmsf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Remove regex.h and fnmatch.h from util.hArnaldo Carvalho de Melo
The users of regex and fnmatch functions should include those headers instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ixzm5kuamsq1ixbkuv6kmwzj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf str{filter,list}: Disentangle headersArnaldo Carvalho de Melo
There are places where we just need a forward declaration, and others were we need to include strlist.h and/or strfilter.h, reducing the impact of changes in headers on the build time, do it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zab42gbiki88y9k0csorxekb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Move srcline definitions to separate headerArnaldo Carvalho de Melo
Out of util.h into a new file, srcline.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ludnlm4djqcdjziekzr4s3u9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27perf report: Show inline stack for browser modeJin Yao
If the address belongs to an inlined function, the source information back to the first non-inlined function will be printed. For example: 1. Show inlined function name perf report -g function --inline - 0.69% 0.00% inline ld-2.23.so [.] dl_main - dl_main 0.56% _dl_relocate_object _dl_relocate_object (inline) elf_dynamic_do_Rela (inline) 2. Show the file/line information perf report -g address --inline - 0.69% 0.00% inline ld-2.23.so [.] _dl_start _dl_start rtld.c:307 /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline) + _dl_sysdep_start dl-sysdep.c:250 Signed-off-by: Yao Jin <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1490474069-15823-6-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf tools: Add 'cgroup_id' sort order keywordHari Bathini
This patch introduces a cgroup identifier entry field in perf report to identify or distinguish data of different cgroups. It uses the device number and inode number of cgroup namespace, included in perf data with the new PERF_RECORD_NAMESPACES event, as cgroup identifier. With the assumption that each container is created with it's own cgroup namespace, this allows assessment/analysis of multiple containers at once. A simple test for this would be to clone a few processes passing SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run different workloads on each of those contexts, while running perf record command with --namespaces option. Shown below is the output of perf report, sorted with cgroup identifier, on perf.data generated with the above test scenario, clearly indicating one context's considerable use of kernel memory in comparison with others: $ perf report -s cgroup_id,sample --stdio # # Total Lost Samples: 0 # # Samples: 5K of event 'kmem:kmalloc' # Event count (approx.): 5965 # # Overhead cgroup id (dev/inode) Samples # ........ ..................... ............ # 81.27% 3/0xeffffffb 4848 16.24% 3/0xf00000d0 969 1.16% 3/0xf00000ce 69 0.82% 3/0xf00000cf 49 0.50% 0/0x0 30 While this is a start, there is further scope of improving this. For example, instead of cgroup namespace's device and inode numbers, dev and inode numbers of some or all namespaces may be used to distinguish which processes are running in a given container context. Also, scripts to map device and inode info to containers sounds plausible for better tracing of containers. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891933338.25309.756882900782042645.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03perf tools: Allow sorting by symbol sizeCharles Baylis
Add new sort key 'symbol_size' to allow user to sort by symbol size, or (more usefully) display the symbol size using --fields=...,symbol_size. Committer note: Testing it together with the recently added -q, to remove the headers, and using the '+' sign with -s, to add the symbol_size sort order to the default, which is '-s/--sort comm,dso,symbol': # perf report -q -s +symbol_size | head -10 10.39% swapper [kernel.vmlinux] [k] intel_idle 270 3.45% swapper [kernel.vmlinux] [k] update_blocked_averages 1546 2.61% swapper [kernel.vmlinux] [k] update_load_avg 1292 2.36% swapper [kernel.vmlinux] [k] update_cfs_shares 240 1.83% swapper [kernel.vmlinux] [k] __hrtimer_run_queues 606 1.74% swapper [kernel.vmlinux] [k] update_cfs_rq_load_avg. 1187 1.66% swapper [kernel.vmlinux] [k] apic_timer_interrupt 152 1.60% CPU 0/KVM [kvm] [k] kvm_set_msr_common 3046 1.60% gnome-shell libglib-2.0.so.0 [.] g_slist_find 37 1.46% gnome-termina libglib-2.0.so.0 [.] g_hash_table_lookup 370 # Signed-off-by: Charles Baylis <charles.baylis@linaro.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1487943176-13840-1-git-send-email-charles.baylis@linaro.org [ Use symbol__size(), remove needless %lld + (long long) casting ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-27scripts/spelling.txt: add "an union" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: an union||a union Link: http://lkml.kernel.org/r/1481573103-11329-5-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-19perf c2c report: Add src line sort keyJiri Olsa
It is to be displayed in the single cacheline output: cl_srcline It displays source line related to the code address that accessed cacheline. It's a wrapper to global srcline sort entry. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cmnzgm37mjz56ozsg4mnbgxq@git.kernel.org [ Remove __maybe_unused from now used 'he' parameter in filter_cb() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22perf tools: Make several sorting functions globalJiri Olsa
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474558645-19956-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22perf tools: Make output_field_add and sort_dimension__add globalJiri Olsa
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474558645-19956-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22perf tools: Make reset_dimensions globalJiri Olsa
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474558645-19956-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-20perf hists: Fix width computation for srcline sort entryJiri Olsa
Adding header size to width computation for srcline sort entry, because it's possible to get empty data with ':0' which set width of 2 which is lower than width needed to display column header. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474290610-23241-62-git-send-email-jolsa@kernel.org [ Added declaration to sort.h ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf report: Allow configuring the default sort order in ~/.perfconfigArnaldo Carvalho de Melo
Allows changing the default sort order from "comm,dso,symbol" to some other default, for instance "sym,dso" may be more fitting for kernel developers. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pm1h5puxua8nsxksd68fjm8r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf hists: Introduce hist_entry_opsJiri Olsa
Introducing allocation callbacks, that allows to extend current hist_entry object into objects with special needs without polluting the current hist_entry object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467701765-26194-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-23perf report: Add srcline_from/to branch sort keysAndi Kleen
Add "srcline_from" and "srcline_to" branch sort keys that allow to show the source lines of a branch. That makes it much easier to track down where particular branches happen in the program, for example to examine branch mispredictions, or to associate it with cycle counts: % perf record -b -e cycles:p ./tcall % perf report --sort srcline_from,srcline_to,mispredict ... 15.10% tcall.c:18 tcall.c:10 N 14.83% tcall.c:11 tcall.c:5 N 14.12% tcall.c:7 tcall.c:12 N 14.04% tcall.c:12 tcall.c:5 N 12.42% tcall.c:17 tcall.c:18 N 12.39% tcall.c:7 tcall.c:13 N 12.27% tcall.c:13 tcall.c:17 N ... % perf report --sort srcline_from,srcline_to,cycles ... 17.12% tcall.c:18 tcall.c:11 1 17.01% tcall.c:12 tcall.c:6 1 16.98% tcall.c:11 tcall.c:6 1 15.91% tcall.c:17 tcall.c:18 1 6.38% tcall.c:7 tcall.c:17 7 4.80% tcall.c:7 tcall.c:12 8 4.21% tcall.c:7 tcall.c:17 8 2.67% tcall.c:7 tcall.c:12 7 2.62% tcall.c:7 tcall.c:12 10 2.10% tcall.c:7 tcall.c:17 9 1.58% tcall.c:7 tcall.c:12 6 1.44% tcall.c:7 tcall.c:12 5 1.38% tcall.c:7 tcall.c:12 9 1.06% tcall.c:7 tcall.c:17 13 1.05% tcall.c:7 tcall.c:12 4 1.01% tcall.c:7 tcall.c:17 6 Open issues: - Some kernel symbols get misresolved. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1463775308-32748-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__has_comm into struct perf_hpp_listJiri Olsa
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__has_comm into struct perf_hpp_list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__has_thread into struct perf_hpp_listJiri Olsa
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__has_thread into struct perf_hpp_list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__has_socket into struct perf_hpp_listJiri Olsa
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__has_socket into struct perf_hpp_list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__has_dso into struct perf_hpp_listJiri Olsa
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__has_dso into struct perf_hpp_list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__has_sym into struct perf_hpp_listJiri Olsa
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__has_sym into struct perf_hpp_list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 13:52:56 +0000