summaryrefslogtreecommitdiff
path: root/tools/perf/util/sort.c
AgeCommit message (Collapse)Author
2019-03-19perf report: Show all sort keys in help outputAndi Kleen
Show all the supported sort keys in the command line help output, so that it's not needed to refer to the manpage. Before: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list. After: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ... Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-11perf report: Support time sort keyAndi Kleen
Add a time sort key to perf report to display samples for different time quantums separately. This allows easier analysis of workloads that change over time, and also will allow looking at the context of samples. % perf record ... % perf report --sort time,overhead,symbol --time-quantum 1ms --stdio ... 0.67% 277061.87300 [.] _dl_start 0.50% 277061.87300 [.] f1 0.50% 277061.87300 [.] f2 0.33% 277061.87300 [.] main 0.29% 277061.87300 [.] _dl_lookup_symbol_x 0.29% 277061.87300 [.] dl_main 0.29% 277061.87300 [.] do_lookup_x 0.17% 277061.87300 [.] _dl_debug_initialize 0.17% 277061.87300 [.] _dl_init_paths 0.08% 277061.87300 [.] check_match 0.04% 277061.87300 [.] _dl_count_modids 1.33% 277061.87400 [.] f1 1.33% 277061.87400 [.] f2 1.33% 277061.87400 [.] main 1.17% 277061.87500 [.] main 1.08% 277061.87500 [.] f1 1.08% 277061.87500 [.] f2 1.00% 277061.87600 [.] main 0.83% 277061.87600 [.] f1 0.83% 277061.87600 [.] f2 1.00% 277061.87700 [.] main Committer notes: Rename 'time' argument to hist_time() to htime to overcome this in older distros: cc1: warnings being treated as errors util/hist.c: In function 'hist_time': util/hist.c:251: error: declaration of 'time' shadows a global declaration /usr/include/time.h:186: error: shadowed declaration is here Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190311144502.15423-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-19perf report: Don't shadow inlined symbol with different addr rangeHe Kuang
We can't assume inlined symbols with the same name are equal, because their address range may be different. This will cause the symbols with different addresses be shadowed when adding to the hist entry, and lead to ERANGE error when checking the symbol address during sample parse, the addr should be within the range of [sym.start, sym.end]. The error message is like: "0x36aea60 [0x8]: failed to process type: 68". The second parameter of symbol__new() is the length of the fake symbol for the inline frame, which is the subtraction of the end and start address of base_sym. Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: aa441895f7b4 ("perf report: Compare symbol name for inlined frames when sorting") Link: http://lkml.kernel.org/r/20190219130531.15692-1-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-06perf report: Move symbol annotation to the resort phaseJiri Olsa
Currently we make the annotation for the IPC column during the entry display, already outside of the progress bar scope, so it appears like 'perf report' is stuck. Move the annotation retrieval to the resort phase, so that all the data are ready for display. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190204141808.23031-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-06pref tools: Add missing map.h includesArnaldo Carvalho de Melo
Lots of places get the map.h file indirectly, and since we're going to remove it from machine.h, then those need to include it directly, do it now, before we remove that dep. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17perf tools: Fix diverse comment typosIngo Molnar
Go over the tools/ files that are maintained in Arnaldo's tree and fix common typos: half of them were in comments, the other half in JSON files. No change in functionality intended. Committer notes: This was split from a larger patch as there are code that is, additionally, maintained outside the kernel tree, so to ease cherry-picking and/or backporting, split this into multiple patches. Just typos in comments, no need to backport, reducing the possibility of possible backporting artifacts. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17perf report: Display average IPC and IPC coverage per symbolJin Yao
Support displaying the average IPC and IPC coverage per symbol in 'perf report' --tui and --stdio modes. For example, $ perf record -b ... $ perf report -s symbol Overhead Symbol IPC [IPC Coverage] 39.60% [.] __random 2.30 [ 54.8%] 18.02% [.] main 0.43 [ 54.3%] 14.21% [.] compute_flag 2.29 [100.0%] 14.16% [.] rand 0.36 [100.0%] 7.06% [.] __random_r 2.57 [ 70.5%] 6.85% [.] rand@plt 0.00 [ 0.0%] Jiri Olsa <jolsa@redhat.com> provided the patch to support the --stdio mode. I merged Jiri's code in this patch. $ perf report -s symbol --stdio # Overhead Symbol IPC [IPC Coverage] # ........ ........................... .................... # 39.60% [.] __random 2.30 [ 54.8%] 18.02% [.] main 0.43 [ 54.3%] 14.21% [.] compute_flag 2.29 [100.0%] 14.16% [.] rand 0.36 [100.0%] 7.06% [.] __random_r 2.57 [ 70.5%] 6.85% [.] rand@plt 0.00 [ 0.0%] 0.02% [k] run_timer_softirq 1.60 [ 57.2%] The columns "IPC" and "[IPC Coverage]" are automatically enabled when the sort-key "symbol" is specified. If the perf.data file doesn't contain timed LBR information, columns are filled with "-". For example, # Overhead Symbol IPC [IPC Coverage] # ........ ........................... .................... # 46.57% [.] main - - 17.60% [.] rand - - 15.84% [.] __random_r - - 11.90% [.] __random - - 6.50% [.] compute_flag - - 1.59% [.] rand@plt - - 0.00% [.] _dl_relocate_object - - 0.00% [k] tlb_flush_mmu - - 0.00% [k] perf_event_mmap - - 0.00% [k] native_sched_clock - - 0.00% [k] intel_pmu_handle_irq_v4 - - 0.00% [k] native_write_msr - - v3: --- Removed the sortkey 'ipc' from command-line. The columns "IPC" and "[IPC Coverage]" are automatically enabled when "symbol" is specified. v2: --- Merge in Jiri's patch to support stdio mode Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1543586097-27632-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-19tools lib traceevent, perf tools: Rename enum format_flags to enum ↵Tzvetomir Stoyanov (VMware)
tep_format_flags In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_". This renames enum format_flags to enum tep_format_flags and adds prefix TEP_ to all of its members. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180919185722.803127871@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-19tools lib traceevent, perf tools: Rename struct format{_field} to struct ↵Tzvetomir Stoyanov (VMware)
tep_format{_field} In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_". This renames struct format to struct tep_format and struct format_field to struct tep_format_field Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180919185722.661319373@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename pevent_read_number_* APIsTzvetomir Stoyanov (VMware)
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes APIs: pevent_read_number, pevent_read_number_field Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180700.804271434@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename pevent print APIsTzvetomir Stoyanov (VMware)
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes APIs: pevent_print_field, pevent_print_fields, pevent_print_funcs, pevent_print_printk Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180700.654453763@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename pevent find APIsTzvetomir Stoyanov (VMware)
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes APIs: pevent_find_any_field, pevent_find_common_field, pevent_find_event, pevent_find_field Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180700.316995920@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename pevent alloc / free APIsTzvetomir Stoyanov (VMware)
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes APIs: pevent_alloc, pevent_free, pevent_event_info and pevent_func_resolver_t Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180700.152609945@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-13tools lib traceevent, perf tools: Rename 'struct pevent_record' to 'struct ↵Tzvetomir Stoyanov (VMware)
tep_record' In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes the 'struct pevent_record' to 'struct tep_record'. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180659.866021298@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-04perf srcline: Make hist_entry srcline helper consistent with map'sArnaldo Carvalho de Melo
No need to have "get_srcline", plain hist_entry__srcline() is enough and shorter. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-irhzpfmgdaf6cyk0uqqexoh9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-04perf sort: Introduce addr_map_symbol__srcline() to make code more compactArnaldo Carvalho de Melo
Since we have 'struct addr_map_symbol' and the srcline sort order keys all operate on those, make the code more compact by introducing a function that receives a pointer to such struct and expands the arguments to map__srcline(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-j540wq7n3ukkh70gk5be0in5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-04perf srcline: Introduce map__srcline() to make code more compactArnaldo Carvalho de Melo
Replacing a common open coded sequence. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2d7d1nzd3ksqornloqeer99r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17perf tools: Read the cache line size lazilyArnaldo Carvalho de Melo
It is not read as commonly as 'page_size', so it makes sense to read it lazily, caching its value when it is first read. Less files open unconditionally at startup. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-35xhrq91u94uc1djtclek1ie@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26perf symbols: No need to special case MAP__FUNCTION in fixupArnaldo Carvalho de Melo
In 39b12f781271 ("perf tools: Make it possible to read object code from vmlinux") we special case MAP__FUNCTION maps inconsistently, the first test tests the map type while the following tests added by this patch don't do that, be consistent and elliminate this special case. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-khmi5jccpcwqa9nybefluzqp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26perf sort: Use mmap->prot on "dcacheline" formattingArnaldo Carvalho de Melo
To match the kernel when setting the PERF_RECORD_MISC_MMAP_DATA bit in perf_event_attr.header.misc, that gets set when VM_EXEC is not set in the vm_flags. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-r1z0tbdc7tich469aw4szinx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-02perf tools: Add a "dso_size" sort orderKim Phillips
Add DSO size to perf report/top sort output list. This includes adding a map__size fn to map.h, which is approximately equal to the DSO data file_size: DSO file size map (end-start) file / (end-start) libwebkit2gtk-4.0.so.37.24.9 43260072 41295872 95% libglib-2.0.so.0.5400.1 1125680 1118208 99% libc-2.26.so 1960656 1925120 101% libdbus-1.so.3.14.13 309456 303104 102% Sample output: $ ./perf report -s dso_size,dso Samples: 2K of event 'cycles:uppp', Event count (approx.): 128373340 Overhead DSO size Shared Object 90.62% unknown [unknown] 2.87% 1118208 libglib-2.0.so.0.5400.1 1.92% 303104 libdbus-1.so.3.14.13 1.42% 1925120 libc-2.26.so 0.77% 41295872 libwebkit2gtk-4.0.so.37.24.9 0.61% 335872 libgobject-2.0.so.0.5400.1 0.41% 1052672 libgdk-3.so.0.2200.25 0.36% 106496 libpthread-2.26.so 0.29% 221184 dbus-daemon 0.17% 159744 ld-2.26.so 0.13% 49152 libwayland-client.so.0.3.0 0.12% 1642496 libgio-2.0.so.0.5400.1 0.09% 7327744 libgtk-3.so.0.2200.25 0.09% 12324864 libmozjs-52.so.0.0.0 0.05% 4796416 perf 0.04% 843776 libgjs.so.0.0.0 0.03% 1409024 libmutter-clutter-1.so Committer testing: To sort by DSO size, use: # perf report -F dso_size,dso,overhead -s dso_size <SNIP> 3465216 libdns-export.so.174.0.1 0.00% 3522560 libgc.so.1.0.3 0.00% 3538944 libbfd-2.29-13.fc27.so 0.59% 3670016 libunistring.so.2.1.0 0.00% 3723264 libguile-2.0.so.22.8.1 0.00% 3776512 libgio-2.0.so.0.5400.3 0.00% 3891200 libc-2.26.so 0.96% 3944448 libmozjs-17.0.so 0.00% 4218880 libperl.so.5.26.1 0.18% 4452352 libpython2.7.so.1.0 0.02% 4472832 perf 0.02% 4603904 git 0.01% 4751360 libcrypto.so.1.1.0g 0.00% 5005312 libslang.so.2.3.1 0.00% 7315456 libgtk-3.so.0.2200.26 0.09% 8818688 i965_dri.so 2.46% 8818688 i965_dri.so (deleted) 1.26% 12414976 libmozjs-52.so.0.0.0 0.03% 23642112 cc1 2.02% 27889664 [kernel.kallsyms] 25.41% 80834560 libxul.so (deleted) 15.68% 98078720 chrome 32.03% 1056964608 [kernel.kallsyms] 1.59% # Signed-off-by: Kim Phillips <kim.phillips@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180327060956.1c01ebe67a2a941bb4468c6f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf tools: Fix comment for sort__* compare functionsJiri Olsa
In commit 2f15bd8c6c6e ("perf tools: Fix "Command" sort_entry's cmp and collapse function") we switched from pointer to string comparison. But failed to remove related comments. Removing them and adding another one to warn before pointer comparison in here. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180206181813.10943-18-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-18perf tools: Use ui__error() for reporting --fields errorsArnaldo Carvalho de Melo
So that we can get it working for TUI, where using just pr_err() would end up making the message emitted to stderr to be erased by the TUI exit routine restoring the terminal to its previous state. Now we can see that trying to use a tracepoint field as one of the --field entries isn't working: # perf top --stdio --no-children -e syscalls:sys_enter_write --fields pid,sym,count Error: Unknown --fields key: `count' Usage: perf top [<options>] --fields <key[,keys...]> output field(s): overhead, period, sample plus all of sort keys # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-usy9hhy7umdd4bbblkn63t8w@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-08perf report: Fix a wrong offset issue when using /proc/kcoreJin Yao
When a valid vmlinux is not found, 'perf report' falls back to look at /proc/kcore. In this case, it will report the impossible large offset. For example: # perf record -b -e cycles:k find /etc/ > /dev/null # perf report --stdio --branch-history 22.77% _vm_normal_page+18446603336221188162 | ---page_remove_rmap +18446603336221188324 page_remove_rmap +18446603336221188487 (cycles:5) unlock_page_memcg +18446603336221188096 page_remove_rmap +18446603336221188327 (cycles:1) The issue is the value which is passed to parameter 'addr' in __get_srcline() is the objdump address. It's not correct if we calculate the offset by using 'addr - sym->start'. This patch creates a new parameter 'ip' in __get_srcline(). It is not converted to objdump address. With this patch, the perf report output is: 22.77% _vm_normal_page+66 | ---page_remove_rmap +228 page_remove_rmap +391 (cycles:5) unlock_page_memcg +0 page_remove_rmap +231 (cycles:1) page_remove_rmap +236 Committer testing: Make sure you get any valid vmlinux out of the way, using '-v' on the 'perf report' case and deleting it from places where perf searches them, like your kernel build dir and the build-id cache, in ~/.debug/. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1514564812-17344-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-07Merge branch 'linus' into perf/core, to fix conflictsIngo Molnar
Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24perf report: Compare symbol name for inlined frames when sortingMilian Wolff
Similar to the callstack frame matching, we also have to compare the symbol name when sorting hist entries. The reason is twofold: On one hand, multiple inlined functions will use the same symbol start/end values of the parent, non-inlined symbol. As such, all of these symbols often end up missing from top-level report, as they get merged with the non-inlined frame. On the other hand, multiple different functions may end up inlining the same function, and we need to aggregate these values properly. Before: ~~~~~ perf report --stdio --inline -g none # Children Self Command Shared Object Symbol # ........ ........ ............ ............. ................................... # 100.00% 39.69% cpp-inlining cpp-inlining [.] main 100.00% 0.00% cpp-inlining cpp-inlining [.] _start 100.00% 0.00% cpp-inlining libc-2.25.so [.] __libc_start_main 97.03% 0.00% cpp-inlining cpp-inlining [.] std::norm<double> (inlined) 59.53% 4.26% cpp-inlining libm-2.25.so [.] hypot 55.21% 55.08% cpp-inlining libm-2.25.so [.] __hypot_finite 0.52% 0.52% cpp-inlining libm-2.25.so [.] cabs ~~~~~ After: ~~~~~ perf report --stdio --inline -g none # Children Self Command Shared Object Symbol # ........ ........ ............ ............. ................................................................................................................................... # 100.00% 39.69% cpp-inlining cpp-inlining [.] main 100.00% 0.00% cpp-inlining cpp-inlining [.] _start 100.00% 0.00% cpp-inlining libc-2.25.so [.] __libc_start_main 62.57% 0.00% cpp-inlining cpp-inlining [.] std::_Norm_helper<true>::_S_do_it<double> (inlined) 62.57% 0.00% cpp-inlining cpp-inlining [.] std::__complex_abs (inlined) 62.57% 0.00% cpp-inlining cpp-inlining [.] std::abs<double> (inlined) 62.57% 0.00% cpp-inlining cpp-inlining [.] std::norm<double> (inlined) 59.53% 4.26% cpp-inlining libm-2.25.so [.] hypot 55.21% 55.08% cpp-inlining libm-2.25.so [.] __hypot_finite 34.46% 0.00% cpp-inlining cpp-inlining [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined) 32.39% 0.00% cpp-inlining cpp-inlining [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined) 32.39% 0.00% cpp-inlining cpp-inlining [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined) 12.29% 0.00% cpp-inlining cpp-inlining [.] std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined) 12.29% 0.00% cpp-inlining cpp-inlining [.] std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined) 12.29% 0.00% cpp-inlining cpp-inlining [.] std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined) 0.52% 0.52% cpp-inlining libm-2.25.so [.] cabs ~~~~~ Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/20171009203310.17362-11-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-24perf callchain: Mark inlined frames in output by " (inlined)" suffixMilian Wolff
The original patch that introduced inline frame output in the various browsers used this suffix already. The new centralized approach that uses fake symbols for inlined frames was missing this approach so far. Instead of changing the symbol name itself, we only print the suffix where needed. This allows us to efficiently lookup the symbol for a given name without first having to append the suffix before the lookup. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/20171009203310.17362-8-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01perf sort: Add sort option for physical addressKan Liang
Add a new sort option "phys_daddr" for --mem-mode sort. With this option applied, perf can sort and report by sample's physical address. Signed-off-by: Kan Liang <kan.liang@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504026672-7304-3-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-26perf sort: Use default sort if evlist is emptyDavid Carrillo-Cisneros
Fixes bug noted by Jiri in https://lkml.org/lkml/2017/6/13/755 and caused by commit d49dadea7862 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events") not taking into account that evlist is empty in pipe-mode. Before this commit, pipe mode will only show bogus "100.00% N/A" instead of correct output as follows: $ perf record -o - sleep 1 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:ppH' # Event count (approx.): 145658 # # Overhead Trace output # ........ ............ # 100.00% N/A Correct output, after patch: $ perf record -o - sleep 1 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:ppH' # Event count (approx.): 191331 # # Overhead Command Shared Object Symbol # ........ ....... ................. ................................. # 81.63% sleep libc-2.19.so [.] _exit 13.58% sleep ld-2.19.so [.] do_lookup_x 2.34% sleep [kernel.kallsyms] [k] context_switch 2.34% sleep libc-2.19.so [.] __GI___libc_nanosleep 0.11% perf [kernel.kallsyms] [k] __intel_pmu_enable_a Reported-by: Jiri Olsa <jolsa@kernel.org> Report-Link: https://lkml.kernel.org/r/20170613185422.GA6092@krava Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: d49dadea7862 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events") Link: https://lkml.kernel.org/r/20170721051157.47331-1-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-27perf tools: Replace error() with pr_err()Arnaldo Carvalho de Melo
To consolidate the error reporting facility. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Use just forward declarations for struct thread where possibleArnaldo Carvalho de Melo
Removing various instances of unnecessary includes, reducing the maze of header dependencies. Link: http://lkml.kernel.org/n/tip-hwu6eyuok9pc57alookyzmsf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Remove regex.h and fnmatch.h from util.hArnaldo Carvalho de Melo
The users of regex and fnmatch functions should include those headers instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ixzm5kuamsq1ixbkuv6kmwzj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf str{filter,list}: Disentangle headersArnaldo Carvalho de Melo
There are places where we just need a forward declaration, and others were we need to include strlist.h and/or strfilter.h, reducing the impact of changes in headers on the build time, do it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zab42gbiki88y9k0csorxekb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Include errno.h where neededArnaldo Carvalho de Melo
Removing it from util.h, part of an effort to disentangle the includes hell, that makes changes to util.h or something included by it to cause a complete rebuild of the tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Including missing inttypes.h headerArnaldo Carvalho de Melo
Needed to use the PRI[xu](32,64) formatting macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is usedArnaldo Carvalho de Melo
To pave the way for further cleanups where linux/kernel.h may stop being included in some header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27perf report: Enable sorting by srcline as keyMilian Wolff
Often it is interesting to know how costly a given source line is in total. Previously, one had to build these sums manually based on all addresses that pointed to the same source line. This patch introduces srcline as a sort key, which will do the aggregation for us. Paired with the recent addition of showing inline frames, this makes perf report much more useful for many C++ work loads. The following shows the new feature in action. First, let's show the status quo output when we sort by address. The result contains many hist entries that generate the same output: ~~~~~~~~~~~~~~~~ $ perf report --stdio --inline -g address # Children Self Command Shared Object Symbol # ........ ........ ............ ................... ......................................... # 99.89% 35.34% cpp-inlining cpp-inlining [.] main | |--64.55%--main complex:655 | /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline) | /usr/include/c++/6.3.1/complex:664 (inline) | | | |--60.31%--hypot +20 | | | | | |--8.52%--__hypot_finite +273 | | | | | |--7.32%--__hypot_finite +411 ... --35.34%--_start +4194346 __libc_start_main +241 | |--6.65%--main random.tcc:3326 | /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline) | /usr/include/c++/6.3.1/bits/random.h:1809 (inline) | /usr/include/c++/6.3.1/bits/random.h:1818 (inline) | /usr/include/c++/6.3.1/bits/random.h:185 (inline) | |--2.70%--main random.tcc:3326 | /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline) | /usr/include/c++/6.3.1/bits/random.h:1809 (inline) | /usr/include/c++/6.3.1/bits/random.h:1818 (inline) | /usr/include/c++/6.3.1/bits/random.h:185 (inline) | |--1.69%--main random.tcc:3326 | /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline) | /usr/include/c++/6.3.1/bits/random.h:1809 (inline) | /usr/include/c++/6.3.1/bits/random.h:1818 (inline) | /usr/include/c++/6.3.1/bits/random.h:185 (inline) ... ~~~~~~~~~~~~~~~~ With this patch and `-g srcline` we instead get the following output: ~~~~~~~~~~~~~~~~ $ perf report --stdio --inline -g srcline # Children Self Command Shared Object Symbol # ........ ........ ............ ................... ......................................... # 99.89% 35.34% cpp-inlining cpp-inlining [.] main | |--64.55%--main complex:655 | /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline) | /usr/include/c++/6.3.1/complex:664 (inline) | | | |--64.02%--hypot | | | | | --59.81%--__hypot_finite | | | --0.53%--cabs | --35.34%--_start __libc_start_main | |--12.48%--main random.tcc:3326 | /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline) | /usr/include/c++/6.3.1/bits/random.h:1809 (inline) | /usr/include/c++/6.3.1/bits/random.h:1818 (inline) | /usr/include/c++/6.3.1/bits/random.h:185 (inline) ... ~~~~~~~~~~~~~~~~ Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/20170318214928.9047-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf tools: Add 'cgroup_id' sort order keywordHari Bathini
This patch introduces a cgroup identifier entry field in perf report to identify or distinguish data of different cgroups. It uses the device number and inode number of cgroup namespace, included in perf data with the new PERF_RECORD_NAMESPACES event, as cgroup identifier. With the assumption that each container is created with it's own cgroup namespace, this allows assessment/analysis of multiple containers at once. A simple test for this would be to clone a few processes passing SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run different workloads on each of those contexts, while running perf record command with --namespaces option. Shown below is the output of perf report, sorted with cgroup identifier, on perf.data generated with the above test scenario, clearly indicating one context's considerable use of kernel memory in comparison with others: $ perf report -s cgroup_id,sample --stdio # # Total Lost Samples: 0 # # Samples: 5K of event 'kmem:kmalloc' # Event count (approx.): 5965 # # Overhead cgroup id (dev/inode) Samples # ........ ..................... ............ # 81.27% 3/0xeffffffb 4848 16.24% 3/0xf00000d0 969 1.16% 3/0xf00000ce 69 0.82% 3/0xf00000cf 49 0.50% 0/0x0 30 While this is a start, there is further scope of improving this. For example, instead of cgroup namespace's device and inode numbers, dev and inode numbers of some or all namespaces may be used to distinguish which processes are running in a given container context. Also, scripts to map device and inode info to containers sounds plausible for better tracing of containers. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891933338.25309.756882900782042645.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf sort: Fix segfault with basic block 'cycles' sort dimensionChangbin Du
Skip the sample which doesn't have branch_info to avoid segmentation fault: The fault can be reproduced by: perf record -a perf report -F cycles Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 0e332f033a82 ("perf tools: Add support for cycles, weight branch_info field") Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03perf tools: Allow sorting by symbol sizeCharles Baylis
Add new sort key 'symbol_size' to allow user to sort by symbol size, or (more usefully) display the symbol size using --fields=...,symbol_size. Committer note: Testing it together with the recently added -q, to remove the headers, and using the '+' sign with -s, to add the symbol_size sort order to the default, which is '-s/--sort comm,dso,symbol': # perf report -q -s +symbol_size | head -10 10.39% swapper [kernel.vmlinux] [k] intel_idle 270 3.45% swapper [kernel.vmlinux] [k] update_blocked_averages 1546 2.61% swapper [kernel.vmlinux] [k] update_load_avg 1292 2.36% swapper [kernel.vmlinux] [k] update_cfs_shares 240 1.83% swapper [kernel.vmlinux] [k] __hrtimer_run_queues 606 1.74% swapper [kernel.vmlinux] [k] update_cfs_rq_load_avg. 1187 1.66% swapper [kernel.vmlinux] [k] apic_timer_interrupt 152 1.60% CPU 0/KVM [kvm] [k] kvm_set_msr_common 3046 1.60% gnome-shell libglib-2.0.so.0 [.] g_slist_find 37 1.46% gnome-termina libglib-2.0.so.0 [.] g_hash_table_lookup 370 # Signed-off-by: Charles Baylis <charles.baylis@linaro.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1487943176-13840-1-git-send-email-charles.baylis@linaro.org [ Use symbol__size(), remove needless %lld + (long long) casting ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20perf utils: Check verbose flag properlyNamhyung Kim
It now can have negative value to suppress the message entirely. So it needs to check it being positive. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org [ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-19perf c2c report: Add src line sort keyJiri Olsa
It is to be displayed in the single cacheline output: cl_srcline It displays source line related to the code address that accessed cacheline. It's a wrapper to global srcline sort entry. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-cmnzgm37mjz56ozsg4mnbgxq@git.kernel.org [ Remove __maybe_unused from now used 'he' parameter in filter_cb() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22perf tools: Make several sorting functions globalJiri Olsa
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474558645-19956-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22perf tools: Make output_field_add and sort_dimension__add globalJiri Olsa
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474558645-19956-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22perf tools: Make reset_dimensions globalJiri Olsa
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1474558645-19956-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf report: Allow configuring the default sort order in ~/.perfconfigArnaldo Carvalho de Melo
Allows changing the default sort order from "comm,dso,symbol" to some other default, for instance "sym,dso" may be more fitting for kernel developers. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pm1h5puxua8nsxksd68fjm8r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf hists: Add support for header spanJiri Olsa
Add span argument for header callback function. The handling of this argument is completely in the hands of the callback. The only thing the caller ensures is it's zeroed on the beginning. Omitting span skipping in hierarchy headers and gtk code. The c2c code use this to span header lines based on the entries span configuration. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf hists: Add line argument into perf_hpp_fmt's header callbackJiri Olsa
Adding line argument into perf_hpp_fmt's header callback to be able to request specific header line. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf hists: Trim libtraceevent trace_seq buffersArnaldo Carvalho de Melo
When we use libtraceevent to format trace event fields into printable strings to use in hist entries it is important to trim it from the default 4 KiB it starts with to what is really used, to reduce the memory footprint, so use realloc(seq.buffer, seq.len + 1) when returning the seq.buffer formatted with the fields contents. Reported-and-Tested-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-t3hl7uxmilrkigzmc90rlhk2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 01:44:49 +0000