summaryrefslogtreecommitdiff
path: root/tools/perf/tests/code-reading.c
AgeCommit message (Collapse)Author
2016-04-11perf evsel: Do not use globals in config()Arnaldo Carvalho de Melo
Instead receive a callchain_param pointer to configure callchain aspects, not doing so if NULL is passed. This will allow fine grained control over which evsels in an evlist gets callchains enabled. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf tools: Add cpumode to struct perf_sampleArnaldo Carvalho de Melo
To avoid parsing event->header.misc in many locations. This will also allow setting perf.sample.{ip,cpumode} in a single place, from tracepoint fields, as needed by 'perf kvm' with PPC guests, where the guest hardware counters is not available at the host. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qp3yradhyt6q3wl895b1aat0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf test: Reduce the sample_freq for the 'object code reading' testArnaldo Carvalho de Melo
Using 4 kHz is not necessary and sometimes is more than what was auto-tuned: # dmesg | grep max_sample_rate | tail -2 [ 2499.144373] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 3592.413606] perf interrupt took too long (5069 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 Simulating a auto-tune of 2000 we make the test fail, as reported by Steven Noonan for one of his machines, so reduce it to 500 HZ, it is enough to get a good number of samples for this test: # perf test -v 21 2>&1 | grep '^Reading object code for memory address' | tee /tmp/out | tail -5 Reading object code for memory address: 0x479f40 Reading object code for memory address: 0x7f29b7eea80d Reading object code for memory address: 0x7f29b7eea80d Reading object code for memory address: 0x7f29b7eea800 Reading object code for memory address: 0xffffffff813b2f23 [root@jouet ~]# wc -l /tmp/out 40 /tmp/out [root@jouet ~]# For systems that auto-tune below that, the previous patches will tell the user what is happening so that he may either ignore the result of this test or bump /proc/sys/kernel/perf_event_max_sample_rate. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-6kufyy1iprdfzrbtuqgxir70@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf tests: Use perf_evlist__strerror_open() to provide hints about max_freqArnaldo Carvalho de Melo
Before: # perf test -v "code reading" 2>&1 | tail -4 perf_evlist__open failed test child finished with -1 ---- end ---- Test object code reading: FAILED! # After: # perf test -v "code reading" 2>&1 | tail -7 perf_evlist__open() failed! Error: Invalid argument. Hint: Check /proc/sys/kernel/perf_event_max_sample_rate. Hint: The current value is 1000 and 4000 is being requested. test child finished with -1 ---- end ---- Test object code reading: FAILED! # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ifbx7vmrc38loe6317owz2jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-07perf test: Fix cpus and thread maps reference in error pathJiri Olsa
In error path to try user space event, both cpus and threads map now owned by evlist and freed by perf_evlist__set_maps call. Getting reference to keep them alive. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1449131658-1841-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-07perf test: Use machine__new_host in mmap thread code reading testJiri Olsa
This is more straightforward than what we have now. It also fixes a segfault within machine__exit, that's caused by not creating kernel maps for machine.. We're calling machine__destroy_kernel_maps in machine__exit since commit: ebe9729c8c31 perf machine: Fix to destroy kernel maps when machine exits Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1449131658-1841-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf tests: Pass the subtest index to each test routineArnaldo Carvalho de Melo
Some tests have sub-tests we want to run, so allow passing this. Wang tried to avoid having to touch all tests, but then, having the test.func in an anonymous union makes the build fail on older compilers, like the one in RHEL6, where: test a = { .func = foo, }; fails. To fix it leave the func pointer in the main structure and pass the subtest index to all tests, end result function is the same, but we have just one function pointer, not two, with and without the subtest index as an argument. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-03perf test: Keep test result clean if '-v' not setWang Nan
According to [1], 'perf test' should avoid output too much information if '-v' is not set, only 'Ok', 'FAIL' or 'Skip' need to be printed. This patch removes several messages sent directly to stderr to make the output clean. Before this patch: # perf test dummy 23: Test using a dummy software event to keep tracking : (not supported) Ok After this patch: # perf test dummy 23: Test using a dummy software event to keep tracking : Skip [1] http://lkml.kernel.org/r/20151020134155.GE4400@redhat.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446547486-229499-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-30perf machine: Add method for common kernel_map(FUNCTION) operationArnaldo Carvalho de Melo
And it is also a step in the direction of killing the separation of data and text maps in map_groups. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rrds86kb3wx5wk8v38v56gw8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-30perf machine: Use machine__kernel_map() thoroughlyArnaldo Carvalho de Melo
In places where we were using its open coded equivalent. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-khkdugcdoqy3tkszm3jdxgbe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14perf tests: Print objdump/dso buffers if they don't matchJan Stancek
Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/d0f42f786bc0e965918e0f422df25617a12a4021.1441181335.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14perf tests: Stop reading if objdump output crossed sectionsJan Stancek
objdump output can span across multiple sections: Disassembly of section .text: 0000000000000008 <crc32c+0x8>: 8: 48 89 e5 mov %rsp,%rbp b: 53 push %rbx c: 8b 01 mov (%rcx),%eax <snip> 6b: 90 nop Disassembly of section .init.text: 0000000000000008 <init_module+0x8>: 8: 00 00 add %al,(%rax) a: 00 00 add %al,(%rax) c: 48 89 e5 Stop further reading if an address starts going backwards, assuming we crossed sections. Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/9d1ea95e5f9884fdff1be6f761a2feabef37412c.1441181335.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14perf tests: Make objdump disassemble zero blocksJan Stancek
Add -z parameter to avoid skipping zero blocks: ffffffff816704fe <sysret_check+0x4b>: ffffffff816704fe: 7b 34 jnp ffffffff81670534 <sysret_signal+0x1c> ... ffffffff81670501 <sysret_careful>: ffffffff81670501: 0f ba e2 03 bt $0x3,%edx ffffffff81670505: 73 11 jae ffffffff81670518 <sysret_signal> Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/130c6267fbdb9af506633a9efa06f3269ff5bd2c.1441275982.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14perf tests: Take into account address of each objdump lineJan Stancek
objdump output can contain repeated bytes. At the moment test reads all output sequentially, assuming each address is represented in output only once: ffffffff8164efb3 <retint_swapgs+0x9>: ffffffff8164efb3: c1 5d 00 eb rcrl $0xeb,0x0(%rbp) ffffffff8164efb7: 00 4c 8b 5c add %cl,0x5c(%rbx,%rcx,4) ffffffff8164efb8 <restore_c_regs_and_iret>: ffffffff8164efb8: 4c 8b 5c 24 30 mov 0x30(%rsp),%r11 ffffffff8164efbd: 4c 8b 54 24 38 mov 0x38(%rsp),%r10 Store objdump output to buffer according to offset calculated from address on each line. Signed-off-by: Jan Stancek <jstancek@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/ad13289a55d6350f7717757c7e32c2d4286402bd.1441181335.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-25perf tools: Add reference counting for thread_map objectJiri Olsa
Adding reference counting for thread_map object, so it could be easily shared among other objects. Using thread_map__put instead thread_map__delete and making thread_map__delete static. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435012588-9007-5-git-send-email-jolsa@kernel.org [ Adjustments to move it ahead of the "comm" patches ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-25perf tools: Add reference counting for cpu_map objectJiri Olsa
Adding refference counting for cpu_map object, so it could be easily shared among other objects. Using cpu_map__put instead cpu_map__delete and making cpu_map__delete static. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435012588-9007-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19perf tools: Configurable per thread proc map processing time outKan Liang
The time out to limit the individual proc map processing was hard code to 500ms. This patch introduce a new option --proc-map-timeout to make the time limit configurable. Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-08perf machine: Protect the machine->threads with a rwlockArnaldo Carvalho de Melo
In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-29perf tools: Add parse_events_error interfaceJiri Olsa
Adding support to return error information from parse_events function. Following struct will be populated by parse_events function on return: struct parse_events_error { int idx; char *str; char *help; }; where 'idx' is the position in the string where the parsing failed, 'str' contains dynamically allocated error string describing the error and 'help' is optional help string. The change contains reporting function, which currently does not display anything. The code changes to supply error data for specific event types are coming in next patches. However this is what the expected output is: $ sudo perf record -e 'sched:krava' ls event syntax error: 'sched:krava' \___ unknown tracepoint ... $ perf record -e 'cpu/even=0x1/' ls event syntax error: 'cpu/even=0x1/' \___ unknown term valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type ... $ perf record -e cycles,cache-mises ls event syntax error: '..es,cache-mises' \___ parser error ... The output functions cut the beginning of the event string so the error starts up to 10th character and cut the end of the string of it crosses the terminal width. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org [ Renamed 'error' variables to 'err', not to clash with util.h error() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-29perf tests: Use thread->mg->machineArnaldo Carvalho de Melo
Instead of passing both thread and machine. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-y2nl2v7p7of0dzuyc3tppxoo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-29perf tools: A thread's machine can be found via thread->mg->machineArnaldo Carvalho de Melo
So stop passing both machine and thread to several thread methods, reducing function signature length. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ckcy19dcp1jfkmdihdjcqdn1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-05-12perf tools: Use tid for finding threadNamhyung Kim
I believe that passing pid (instead of tid) as the 3rd arg of the machine__find*_thread() was to find a main thread so that it can search proper map group for symbols. However with the map sharing patch applied, it now can do it in any thread. It fixes a bug when each thread has different name, it only reports a main thread for samples in other threads. Cc: Adrian Hunter <adrian.hunter@intel.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1399856202-26221-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-01tools: Consolidate types.hBorislav Petkov
Combine all definitions into a common tools/include/linux/types.h and kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper bitmap.h header. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-04-15perf tools: Fix double free in perf test 21 (code-reading.c)Adrian Hunter
perf_evlist__delete() deletes attached cpu and thread maps but the test is still using them, so remove them from the evlist before deleting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/53465E3E.8070201@intel.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-01-13perf evlist: Auto unmap on destructorArnaldo Carvalho de Melo
Removing further boilerplate after making sure perf_evlist__munmap can be called multiple times for the same evlist. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-o0luenuld4abupm4nmrgzm6f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf evlist: Close fds on destructorArnaldo Carvalho de Melo
Since it is safe to call perf_evlist__close() multiple times, autoclose it and remove the calls to the close from existing tools, reducing the tooling boilerplate. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2kq9v7p1rude1tqxa0aue2tk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf evlist: Move destruction of maps to evlist destructorArnaldo Carvalho de Melo
Instead of requiring tools to do an extra destructor call just before calling perf_evlist__delete. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-0jd2ptzyikxb5wp7inzz2ah2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19perf tools: Rename 'perf_record_opts' to 'record_optsArnaldo Carvalho de Melo
Reduce typing, functions use class__method convention, so unlikely to clash with other libraries. This actually was discussed in the "Link:" referenced message below. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf tests: Handle throttle events in 'object code reading' testAdrian Hunter
Unhandled events cause an error that fails the test, fix it. Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/5281DFE5.3000909@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11perf record: Synthesize non-exec MMAP records when --data usedArnaldo Carvalho de Melo
When perf_event_attr.mmap_data is set the kernel will generate PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are created, so we need to synthesize from /proc/pid/maps for existing threads, as we do for exec mmaps. Right now just 'perf record' does it, but any other tool that uses perf_event__synthesize_thread(s|map) can request it. Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Don Zickus <dzickus@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bill Gray <bgray@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Fowles <rfowles@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-04perf tools: Add time argument on COMM settingFrederic Weisbecker
This way we can later delimit a lifecycle for the COMM and map a hist to a precise COMM:timeslice couple. PERF_RECORD_COMM and PERF_RECORD_FORK events that don't have PERF_SAMPLE_TIME samples can only send 0 value as a timestamp and thus should overwrite any previous COMM on a given thread because there is no sensible way to keep track of all the comms lifecycles in a thread without time informations. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6tyow99vgmmtt9qwr2u2lqd7@git.kernel.org [ Made it cope with PERF_RECORD_MMAP2 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-28perf tools: Fixup mmap event consumptionZhouyi Zhou
The tail position of the event buffer should only be modified after actually use that event. If not the event buffer could be invalid before use, and segment fault occurs when invoking perf top -G. Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn> Cc: David Ahern <dsahern@gmail.com> Cc: Zhouyi Zhou <yizhouzhou@ict.ac.cn> Link: http://lkml.kernel.org/r/1382600613-32177-1-git-send-email-zhouzhouyi@gmail.com [ Simplified the logic using exit gotos and renamed write_tail method to mmap_consume ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-29perf tools: change machine__findnew_thread() to set thread pidAdrian Hunter
Add a new parameter for 'pid' to machine__findnew_thread(). Change callers to pass 'pid' when it is known. Note that callers sometimes want to find the main thread which has the memory maps. The main thread has tid == pid so the usage in that case is: machine__findnew_thread(machine, pid, pid) whereas the usage to find the specific thread is: machine__findnew_thread(machine, pid, tid) Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1377591794-30553-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14perf tests: Fix compile failure on do_sort_somethingDavid Ahern
Commit b55ae0a9 added code-reading.c which fails to compile on Fedora 16 with compiler version: $ gcc --version gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) Failure message is: tests/code-reading.c: In function ‘do_sort_something’: tests/code-reading.c:305:13: error: stack protector not protecting local variables: variable length buffer [-Werror=stack-protector] cc1: all warnings being treated as errors make: *** [/tmp/junk/tests/code-reading.o] Error 1 make: *** Waiting for unfinished jobs.... v2: as Adrian noticed changed sizeof to ARRAY_SIZE Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1376454732-83728-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-12perf tools: Remove filter parameter of thread__find_addr_map()Adrian Hunter
Now that the symbol filter is recorded on the machine there is no need to pass it to thread__find_addr_map(). So remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375961547-30267-9-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-07perf tests: Add kcore to the object code reading testAdrian Hunter
Make the "object code reading" test attempt to read from kcore. The test uses objdump which struggles with kcore. i.e. doesn't always work, sometimes takes a long time. The test has been made to work around those issues. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375875537-4509-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-07perf symbols: Load kernel maps before usingAdrian Hunter
In order to use kernel maps to read object code, those maps must be adjusted to map to the dso file offset. Because lazy-initialization is used, that is not done until symbols are loaded. However the maps are first used by thread__find_addr_map() before symbols are loaded. So this patch changes thread__find_addr() to "load" kernel maps before using them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375875537-4509-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-07perf tests: Add test for reading object codeAdrian Hunter
Using the information in mmap events, perf tools can read object code associated with sampled addresses. A test is added that compares bytes read by perf with the same bytes read using objdump. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1375875537-4509-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>