summaryrefslogtreecommitdiff
path: root/tools/perf/scripts
AgeCommit message (Collapse)Author
2013-11-05perf tools: Finish the removal of 'self' argumentsArnaldo Carvalho de Melo
They convey no information, perhaps I was bitten by some snake at some point, complete the detox by naming the last of those arguments more sensibly. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-10perf script: Fix broken include in Context.xsRamkumar Ramachandra
765532c8 (perf script: Finish the rename from trace to script, 2010-12-23) made a mistake during find-and-replace replacing "../../../util/trace-event.h" with "../../../util/script-event.h", a non-existent file. Fix this include. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1373364033-7918-3-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-22perf: net_dropmonitor: Remove progress indicatorBen Hutchings
We can read /proc/kallsyms in a fraction of a second, so why waste a further fraction of a second showing progress? Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22perf: net_dropmonitor: Use bisection in symbol lookupBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22perf: net_dropmonitor: Do not assume ordering of dictionariesBen Hutchings
The sort order of dictionaries in Python is undocumented. Use tuples instead, which are documented to be lexically ordered. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22perf: net_dropmonitor: Fix symbol-relative addressesBen Hutchings
The comparison between traced and symbol addresses is backwards: if the traced address doesn't exactly match a symbol (which we don't expect it to), we'll show the next symbol and the offset to it, whereas we should show the previous symbol and the offset from it. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22perf: net_dropmonitor: Fix trace parameter orderBen Hutchings
This works much better if we don't treat protocol numbers as addresses. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06perf perl scripts: Fix SIGALRM and pipe read race for rwtopJiri Olsa
Fixing rwtop script race. The issue is caused by rwtop script triggering SIGALRM and underneath pipe reading layer reporting error when interrupted. Fixing this by setting SA_RESTART for rwtop SIGALRM handler, which avoids interruption of the pipe reading layer. The discussion for this issue & fix is here: https://lkml.org/lkml/2012/9/18/123 Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Andrew Jones <drjones@redhat.com> Cc: Andrew Jones <drjones@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360080351-3246-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24perf script: Remove workqueue-stats scriptTom Zanussi
The tracepoints used by the workqueue-stats script no longer exist so trying to run the script results in: # perf script record workqueue-stats invalid or unsupported event: 'workqueue:workqueue_creation' Run 'perf list' for a list of valid events So remove the script until it can be reworked using the new workqueue tracepoints. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Link: http://lkml.kernel.org/r/e7a7637d5df9df86887c3bff7683574665ec5360.1358527965.git.tom.zanussi@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-17perf scripts: Add event_analyzing_sample-record/reportFeng Tang
So that event_analyzing_sample.py can be shown by "perf script -l" Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347007349-3102-4-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-09perf script python: Correct handler check and spelling errorsFeng Tang
Correct the checking for handler returned by PyDict_GetItemString(), also fix some spelling error and remove some data code in event_analyzing_sample.py, as suggested by Namhyung Kim. v2: restore back the wrongly removed trace_unhandled() func Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20120809134613.067104c4@feng-i7 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08perf scripts python: Add event_analyzing_sample.py as a sample for general ↵Feng Tang
event handling Currently only trace point events are supported in perf/python script, the first 3 patches of this serie add the support for all types of events. This script is just a simple sample to show how to gather the basic information of the events and analyze them. This script will create one object for each event sample and insert them into a table in a database, then leverage the simple SQL commands to sort/group them. User can modify or write their brand new functions according to their specific requirment. Here is the sample of how to use the script: $ perf record -a tree $ perf script -s process_event.py There is 100 records in gen_events table Statistics about the general events grouped by thread/symbol/dso: comm number histgram ========================================== swapper 56 ###### tree 20 ##### perf 10 #### sshd 8 #### kworker/7:2 4 ### ksoftirqd/7 1 # plugin-containe 1 # symbol number histgram ========================================================== native_write_msr_safe 40 ###### __lock_acquire 8 #### ftrace_graph_caller 4 ### prepare_ftrace_return 4 ### intel_idle 3 ## native_sched_clock 3 ## Unknown_symbol 2 ## do_softirq 2 ## lock_release 2 ## lock_release_holdtime 2 ## trace_graph_entry 2 ## _IO_putc 1 # __d_lookup_rcu 1 # __do_fault 1 # __schedule 1 # _raw_spin_lock 1 # delay_tsc 1 # generic_exec_single 1 # generic_fillattr 1 # dso number histgram ================================================================== [kernel.kallsyms] 95 ####### /lib/libc-2.12.1.so 5 ### Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344419875-21665-6-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08perf scripts python: Add a python library EventClass.pyFeng Tang
This library defines several class types for perf events which could help to better analyze the event samples. Currently there are just a few classes, PerfEvent is the base class for all perf events, PebsEvent is a HW base Intel x86 PEBS event, and user could add more SW/HW event classes based on requriements. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344419875-21665-5-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-29perf script: Add drop monitor scriptNeil Horman
A while back I created the dropmonitor protocol, which allowed users to get reports of dropped frames communicated to them via a netlink socket. While useful, several people have now asked that I integrate the ability to do drop monitoring with perf, so they don't have to run additional tools. This patch adds a drop monitor script to the perf suite, and provides the same output that the netlink socket does. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1309801217-22450-1-git-send-email-nhorman@tuxdriver.com Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-25perf script: Finish the rename from trace to scriptArnaldo Carvalho de Melo
The scripts have calls to 'perf trace' that need to be converted to 'perf script', do it. This problem was introduced in 133dc4c. Reported-by: Torok Edwin <edwintorok@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Torok Edwin <edwintorok@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-11-16perf: Rename 'perf trace' to 'perf script'Ingo Molnar
Free the perf trace name space and rename the trace to 'script' which is a better match for the scripting engine. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-10perf trace scripting: remove system-wide param from shell scriptsTom Zanussi
Including -a unconditionally when recording doesn't allow for the option of running scripts without it. Future patches will add add it back if needed at run-time. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-10-26perf python scripting: Add futex-contention scriptArnaldo Carvalho de Melo
The equivalent to this SystemTAP script: http://sourceware.org/systemtap/wiki/WSFutexContention [root@doppio ~]# perf trace futex-contention Press control+C to stop and show the summary ^Cnpviewer.bin[15242] lock 7f0a8be19104 contended 29 times, 72806 avg ns npviewer.bin[15242] lock 7f0a8be19130 contended 2 times, 1355 avg ns synergyc[17245] lock f127f4 contended 1 times, 1830569 avg ns firefox[15116] lock 7f2b7238af0c contended 168 times, 1230390 avg ns synergyc[17245] lock f2fc20 contended 1 times, 33149 avg ns npviewer.bin[15255] lock 7f0a8be19074 contended 155 times, 73047 avg ns npviewer.bin[15255] lock 7f0a8be190a0 contended 127 times, 7088 avg ns synergyc[17247] lock f12854 contended 1 times, 46741 avg ns synergyc[17245] lock f12610 contended 1 times, 7358 avg ns [root@doppio ~]# Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-26perf python scripting: Fixup cut'n'paste error in sctop scriptArnaldo Carvalho de Melo
Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Support fedora 11 (audit 1.7.17)Arnaldo Carvalho de Melo
Where we don't have the audit.MACH_ARMEB constant. Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Improve the syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall names . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia tmp]# perf trace syscall-counts-by-pid Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- automount [1670] futex 2 sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 perf [15178] read 2506 open 794 close 769 write 240 getdents 112 lseek 16 stat 9 perf_counter_open 5 fcntl 5 mmap 5 statfs 2 perf [15179] read 56701 open 499 stat 176 fstat 149 close 109 mmap 98 brk 75 rt_sigaction 66 munmap 42 mprotect 24 lstat 7 lseek 5 getdents 4 ioctl 3 readlink 2 futex 1 statfs 1 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 write 1 [root@emilia tmp]# fg -bash: fg: current: no such job [root@emilia tmp]# perf trace syscall-counts-by-pid 2322 Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# perf trace syscall-counts-by-pid sshd Press control+C to stop and show the summary ^C syscall events for sshd: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: print the syscall name on sctopArnaldo Carvalho de Melo
[root@emilia tmp]# perf trace sctop 1 syscall events: event count ---------------------------------------- ---------- read 215400 futex 4029 write 376 brk 33 rt_sigprocmask 24 select 17 lseek 2 fsync 1 ^C[root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Improve the syscalls-counts scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name Now it looks like this: [root@emilia ~]# perf trace syscall-counts Press control+C to stop and show the summary ^C syscall events: event count ---------------------------------------- ----------- read 102752 open 1293 close 878 write 319 stat 185 fstat 149 getdents 116 mmap 98 brk 80 rt_sigaction 66 munmap 42 mprotect 24 lseek 21 lstat 7 rt_sigprocmask 4 futex 3 statfs 3 ioctl 3 readlink 2 select 2 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Improve the failed-syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name using the audit-lib-python package, if installed . Print the errno string . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia ~]# perf trace failed-syscalls-by-pid Press control+C to stop and show the summary ^C syscall errors: comm [pid] count ------------------------------ ---------- automount [1670] syscall: futex err = ETIMEDOUT 39 irqbalance [1462] syscall: openat err = ENOENT 4 perf [7888] syscall: lseek err = ESPIPE 1 syscall: open err = ENOENT 24 perf [7889] syscall: ioctl err = EINVAL 1 syscall: readlink err = EINVAL 2 syscall: open err = ENOENT 389 syscall: stat err = ENOENT 141 syscall: lseek err = ESPIPE 3 [root@emilia ~]# [root@emilia ~]# perf trace failed-syscalls-by-pid 1670 Press control+C to stop and show the summary ^C syscall errors: comm [pid] count ------------------------------ ---------- automount [1670] syscall: futex err = ETIMEDOUT 2 [root@emilia ~]# [root@emilia ~]# [root@emilia ~]# [root@emilia ~]# perf trace failed-syscalls-by-pid automount Press control+C to stop and show the summary ^C syscall errors for automount: comm [pid] count ------------------------------ ---------- automount [1669] syscall: futex err = ETIMEDOUT 1 automount [1670] syscall: futex err = ETIMEDOUT 5 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-23perf trace: Use $PERF_EXEC_PATH in canned report scriptsBen Hutchings
Set $PERF_EXEC_PATH before starting the record and report scripts, and make them use it where necessary. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286723403.2955.205.camel@localhost> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-09-07perf: Add a script to show packets processingKoki Sanagi
Add a perf script which shows packets processing and processed time. It helps us to investigate networking or network devices. If you want to use it, install perf and record perf.data like following. If you set script, perf gathers records until it ends. If not, you must Ctrl-C to stop recording. And if you want a report from record, If you use some options, you can limit the output. Option is below. tx: show only tx packets processing rx: show only rx packets processing dev=: show processing on this device debug: work with debug mode. It shows buffer status. For example, if you want to show received packets processing associated with eth4, 106133.171439sec cpu=0 irq_entry(+0.000msec irq=24:eth4) | softirq_entry(+0.006msec) | |---netif_receive_skb(+0.010msec skb=f2d15900 len=100) | | | skb_copy_datagram_iovec(+0.039msec 10291::10291) | napi_poll_exit(+0.022msec eth4) This perf script helps us to analyze the processing time of a transmit/receive sequence. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com> Cc: Izumo Taku <izumi.taku@jp.fujitsu.com> Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Scott Mcmillan <scott.a.mcmillan@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4C72439D.3040001@jp.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-02perf, sched migration: Librarize task states and event headers helpersFrederic Weisbecker
Librarize the task state and event headers helpers as they can be generally useful. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nikhil Rao <ncrao@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-08-02perf, sched migration: Librarize the GUI classFrederic Weisbecker
Export the GUI facility in the common library path. It is going to be useful for other scheduler views. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nikhil Rao <ncrao@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-08-02perf, sched migration: Make the GUI class client agnosticFrederic Weisbecker
Make the perf migration GUI generic so that it can be reused for other kinds of trace painting. No more notion of CPUs or runqueue from the GUI class, it's now used as a library by the trace parser. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nikhil Rao <ncrao@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-08-02perf, sched migration: Make it vertically scrollableFrederic Weisbecker
With scheduler traces covering more than two cpus, rectangles of the CPUs 3 and more are not visibles. This makes the vertical navigation scrollable so that all of the CPUs rectangles are available. We also want to be able to zoom vertically, so that we can fit at best the screen with CPU rectangles, but that's for later. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nikhil Rao <ncrao@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-08-02perf, sched migration: Parameterize cpu height and spacingNikhil Rao
Without vertical zoom, it is not possible to see all CPUs in a trace taken on a larger machine. This patch parameterizes the height and spacing of CPUs so that you can fit more cpus into the screen. Ideally we should dynamically size/space the CPU rectangles with some minimum threshold. Until then, this patch is a stop-gap. Signed-off-by: Nikhil Rao <ncrao@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-02perf, sched migration: Fix key bindingsNikhil Rao
EVT_KEY_DOWN and EVT_LEFT_DOWN events are not bound to the RootFrame event handler. As a result, zoom/scroll via keyboard events do not work. This patch adds the missing bindings. Signed-off-by: Nikhil Rao <ncrao@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-02perf, sched migration: Ignore unhandled task statesFrederic Weisbecker
Stop printing an error message when we don't have the letter for a given task state. All we need to know is if the task is in the TASK_RUNNING state. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nikhil Rao <ncrao@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-08-02perf, sched migration: Handle ignored migrate out eventsFrederic Weisbecker
Migrate out events may happen on tasks that are not in the runqueue, for example this is the case for tasks that are sleeping. In this case, we don't want to log the migrate out event in the source runqueue because the task is not eventually in the runqueue and we have already logged its sleep event. This fixes timeslices that spuriously propagate a sleep event from the previous timeslice. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nikhil Rao <ncrao@google.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-08-02perf: New migration tool overviewFrederic Weisbecker
This brings a GUI tool that displays an overview of the load of tasks proportion in each CPUs. The CPUs forward progress is cut in timeslices. A new timeslice is created for every runqueue event: a task gets pushed out or pulled in the runqueue. For each timeslice, every CPUs rectangle is colored with a red power that describes the local load against the total load. This more red is the rectangle, the higher is the given CPU load. This load is the number of tasks running on the CPU, without any distinction against the scheduler policy of the tasks, for now. Also for each timeslice, the event origin is depicted on the CPUs that triggered it using a thin colored line on top of the rectangle timeslice. These events are: * sleep: a task went to sleep and has then been pulled out the runqueue. The origin color in the thin line is dark blue. * wake up: a task woke up and has then been pushed in the runqueue. The origin color is yellow. * wake up new: a new task woke up and has then been pushed in the runqueue. The origin color is green. * migrate in: a task migrated in the runqueue due to a load balancing operation. The origin color is violet. * migrate out: reverse of the previous one. Migrate in events usually have paired migrate out events in another runqueue. The origin color is light blue. Clicking on a timeslice provides the runqueue event details and the runqueue state. The CPU rectangles can be navigated using the usual arrow controls. Horizontal zooming in/out is possible with the "+" and "-" buttons. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Venkatesh Pallipadi <venki@google.com> Cc: Pierre Tardy <tardyp@gmail.com> Cc: Nikhil Rao <ncrao@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com>
2010-06-01perf scripts python: Give field dict to unhandled callbackPierre Tardy
trace_unhandled() callback does not allow to access event fields, this patch resolves the problem. It can also been used as a more pythonic and flexible way for script writters to demux event types This will for example greatly simplify pytimechart event demux. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu>, Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com> Signed-off-by: Pierre Tardy <tardyp@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: syscall-counts script cleanupTom Zanussi
A small fix for the syscall counts script: - silence the match output in the shell script Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-10-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: syscall-counts-by-pid script cleanupTom Zanussi
A small fix for the syscall counts by pid script: - silence the match output in the shell script Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-9-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: failed-syscalls-by-pid script cleanupTom Zanussi
A small fixe for the failed syscalls by pid script: - silence the match output in the shell script Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-8-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: workqueue-stats script cleanupTom Zanussi
Some minor fixes for the workqueue-stats script: - Fix nuisance 'use of uninitialized value' warnings Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: wakeup-latency script cleanupTom Zanussi
Some minor fixes for the wakeup-latency script: - Fix nuisance 'use of uninitialized value' warnings - Avoid divide-by-zero error Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-5-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: rwtop script cleanupTom Zanussi
A couple of fixes for the rwtop script: - printing the totals and clearing the hashes in the signal handler eventually leads to various random and serious problems when running the rwtop script continuously. Moving the print_totals() calls to the event handlers solves that problem, and the event handlers are invoked frequently enough that it doesn't affect the timeliness of the output. - Fix nuisance 'use of uninitialized value' warnings Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Message-Id: <1273466820-9330-4-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: rw-by-pid script cleanupTom Zanussi
Some minor fixes for the rw-by-pid script: - Fix nuisance 'use of uninitialized value' warnings - Change the failed read/write sections to sort by error counts Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-10perf/trace/scripting: failed-syscalls script cleanupTom Zanussi
A couple small fixes for the failed syscalls script: - The script description says it can be restricted to a specific comm, make it so. - silence the match output in the shell script Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1273466820-9330-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30perf: Remove leftover useless options to record trace events from scriptsFrederic Weisbecker
-f, -c 1, -R are now useless for trace events recording, moreover -M is useless and event hurts. Remove them from the documentation examples and from record scripts. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-04-14perf trace/scripting: Enable scripting shell scripts for live modeTom Zanussi
It should be possible to run any perf trace script in 'live mode'. This requires being able to pass in e.g. '-i -' or other args, which the current shell scripts aren't equipped to handle. In a few cases, there are required or optional args that also need special handling. This patch makes changes the current set of shell scripts as necessary. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-11-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-14perf trace/scripting: Add rwtop and sctop scriptsTom Zanussi
A couple of scripts, one in Python and the other in Perl, that demonstrate 'live mode' tracing. For each, the output of the perf event stream is fed continuously to the script, which continuously aggregates the data and reports the current results every 3 seconds, or at the optionally specified interval. After the current results are displayed, the aggregations are cleared and the cycle begins anew. To run the scripts, simply pipe the output of the 'perf trace record' step as input to the corresponding 'perf trace report' step, using '-' as the filename to -o and -i: $ perf trace record sctop -o - | perf trace report sctop -i - Also adds clear_term() utility functions to the Util.pm and Util.py utility modules, for use by any script to clear the screen. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-10-git-send-email-tzanussi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25perf/scripts: Add syscall tracing scriptsTom Zanussi
Adds a set of scripts that aggregate system call totals and system call errors. Most are Python scripts that also test basic functionality of the new Python engine, but there's also one Perl script added for comparison and for reference in some new Documentation contained in a later patch. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-8-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-25perf/scripts: Add Python scripting engineTom Zanussi
Add base support for Python scripting to perf trace. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-23perf/scripts: Remove check-perf-trace from listed scriptsTom Zanussi
The check-perf-trace script only checks Perl functionality, and doesn't really need to be listed as as user script anyway. This only removes the '-report' shell script, so although it doesn't appear in the listing, the '-record' shell script and the check perf trace perl script itself is still available and can still be run manually as such: $ libexec/perf-core/scripts/perl/bin/check-perf-trace-record $ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 20:47:35 +0000