| Age | Commit message (Collapse) | Author |
|---|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jhmnf9g7y9ryqcjql00unk5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Do not parallelize 'clean' with other targets, figure out if it is
present and do it first, then the other targets.
Noticed with:
tools/perf> make -j24 clean all
LD arch/libperf-in.o
LD plugin_xen-in.o
arch//libperf-in.o: file not recognized: File truncated
make[3]: *** [arch/libperf-in.o] Error 1
make[2]: *** [arch] Error 2
make[2]: *** Waiting for unfinished jobs....
AR libapi.a
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kb0qs29zbz7hxn32mc5zbsoz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'tools/perf/test/make' makefile has in its default, 'all' target
builds that will pollute the source code directory, i.e. that will not
use O= variable.
The 'build-test' should be run as often as possible, preferrably after
each non strictly non-code commit, so speed it up by selecting just
the O= targets.
Furthermore it tests both the Makefile.perf file, that is normally
driven by the main Makefile, and the Makefile, reduce the time in half
by having just MK=Makefile, the most usual, tested by 'build-test'.
Please run:
make -C tools/perf -f tests/make
from time to time for testing also the in-place build tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To prevent the feature check tests to run repeately, one time per
'tests/make' target/test, this patch utilizes the previously introduced
'feature-dump' make target and FEATURES_DUMP variable, making sure that
the feature checkers run only once when doing build-test for normal test
cases.
However, since standard users doesn't reuse features dump result, we'd
better give an option to check their behaviors. The above feature
should be used to make build-test faster only. Only utilize it for
build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454068269-235999-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Those tests take a long time and sometimes we stop it, so allow randomly
shuffling the tests so that we have a better chance of running more of
them in partial 'make build-test' runs.
Using it just on the 'build-test' target, i.e.:
make -C tools/perf build-test
Is equivalent to:
make SHUF=1 -C tools/perf -f tests/make
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ey7461i9q4k8u0987j8guun6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently if we build a single target like:
$ touch util/map.c && make util/map.o
It will not rebuild util/map.o if it already exists and util/map.c is
modified.
The reason is that the top-level 'Makefile' processes util/map.o as an
implicit rule and if util/map.o exists make considers the 'util/map.o'
target as done and will not nest into Makefile.perf.
Adding FORCE for '%', because that's what we want to nest into
Makefile.perf for any target.
Adding Makefile into phony targets, because make tries to rebuild it and
it's also resolved as '%' target.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434977452-32520-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent
change to get it working for Sparc broke arm and arm64 platforms.
Use sysconf to determine the number of online CPUs only parsing
/proc/cpuinfo when sysconf is not available.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com
[ Made it fall back to parsing /proc when getconf not found ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Number of JOBS to use is set automatically to the number of processors found
in /proc/cpuinfo. SPARC uses 'CPU' lines rather than 'processor'. Update the
check in perf's Makefile to work for SPARC.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1427213455-127249-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If JOBS is not by user perf tries to autodetect the number by grepping
the number of CPUs from /proc/cpuinfo. 'grep -c' will always return an
integer so after this command JOBS should be compared to 0, not "".
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424303971-91904-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently various build test can be performed using a Makefile named
tests/make, so one needs to remember and specify it with -f option on
command line.
Add the 'build-test' target in the main Makefile as a shortcut.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389837173-3632-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Once the tags/TAGS file is generated it's never rebuilt until it's
removed by hand.
The reason is that the Makefile does not treat tags/TAGS as targets but
as files and thus won't rebuilt them once they are in place.
Adding PHONY tags/TAGS targets into Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131126125412.GJ1267@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arnaldo reported that 'make DEBUG=1' does not work anymore.
The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:
ifeq ("$(origin DEBUG)", "command line")
PERF_DEBUG = $(DEBUG)
endif
So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:
- DEBUG=0 used to be interpreted as 'debugging on'. Turn it
into 'debugging off' instead.
- Same was the case for 'DEBUG=' - turn that into debug-off
as well.
- Pass in just a clean, sanitized 'DEBUG' value and get rid of
the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arnaldo reported that non-existent build directories were not
recognized properly. The reason is readlink failure causing 'O'
to become empty.
Solve it by passing through the 'O' variable unmodified if
readlink fails.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131009150023.GA10167@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The various build lines from libtraceevent and perf mix up during a
parallel build and produce unaligned output like:
CC builtin-buildid-list.o
CC builtin-buildid-cache.o
CC builtin-list.o
CC FPIC trace-seq.o
CC builtin-record.o
CC FPIC parse-filter.o
CC builtin-report.o
CC builtin-stat.o
CC FPIC parse-utils.o
CC FPIC kbuffer-parse.o
CC builtin-timechart.o
CC builtin-top.o
CC builtin-script.o
BUILD STATIC LIB libtraceevent.a
CC builtin-probe.o
CC builtin-kmem.o
CC builtin-lock.o
To solve this, harmonize all the build message alignments to be similar
to the kernel's kbuild output: prefixed by two spaces and 11-char wide.
After the patch the output looks pretty tidy, even if output lines get
mixed up:
CC builtin-annotate.o
FLAGS: * new build flags or cross compiler
CC builtin-bench.o
AR liblk.a
CC bench/sched-messaging.o
CC FPIC event-parse.o
CC bench/sched-pipe.o
CC FPIC trace-seq.o
CC bench/mem-memcpy.o
CC bench/mem-memset.o
CC FPIC parse-filter.o
CC builtin-diff.o
CC builtin-evlist.o
CC builtin-help.o
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-3-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This was a long-standing bug, relative pathnames like O=dir did not fully
work in the build system:
$ make O=localdir clean
SUBDIR Documentation
../../scripts/Makefile.include:3: *** O=localdir does not exist. Stop.
make[1]: *** [clean] Error 2
make: *** [clean] Error 2
Fix this by canonizing the directory before passing it to Makefile.perf.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-hchMp1hozn9tqgswWcooxcru@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In case the user specifies MAKEFLAGS as an environment variable,
or uses 'make -jN' explicitly, the options can conflict and result in:
BUILD: Doing 'make -j8' parallel build
make[1]: warning: -jN forced in submake: disabling jobserver mode.
GEN common-cmds.h
make[1]: *** write jobserver: Bad file descriptor. Stop.
Make sure we invoke the main makefile in a pristine state.
Users who want to do something non-standard can use the:
make -f Makefile.perf
method to invoke the makefile.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-uen6hzTvkqqngqwjma9yoEgw@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Jiri reported that 'make .o' stopped working:
> [jolsa@krava perf]$ make -f Makefile perf.o
> cc -c -o perf.o perf.c
> In file included from builtin.h:4:0,
> from perf.c:9:
> util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
> compilation terminated.
> make: *** [perf.o] Error 1
This is due to GNU make having built-in rules for popular targets such
as *.o. Clear them out so that all targets as passed through to Makefile.perf.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-5wkuvmlaaxtfgepKcvRij8sh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mky0rtpwxi3ivxsvdjoOEmhr@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
To make it more apparent that there is not change in functionality we introduced
Makefile.parallel separately and now flip it with the main Makefile, which
moves into Makefile.perf.
The renames are:
Makefile.parallel => Makefile
Makefile => Makefile.perf
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-igRfuw9ugbnnpixLd6wpptzl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
config/Makefile is not included for the 'clean' target, so invoke the
config/feature-checks/Makefile 'clean' target from Makefile.perf.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-sh2cGvmsjbrazarlqre7pVwt@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
libtraceevent.a and liblk.a rules have always-missed dependencies,
which causes python.so to be relinked at every build attempt - even
if none of the affected code changes.
This slows down re-builds unnecessarily, by adding more than a second
to the build time:
comet:~/tip/tools/perf> time make
...
SUBDIR /fast/mingo/tip/tools/lib/lk/
make[1]: `liblk.a' is up to date.
SUBDIR /fast/mingo/tip/tools/lib/traceevent/
LINK perf
GEN python/perf.so
real 0m1.701s
user 0m1.338s
sys 0m0.301s
Add the (trivial) dependencies to not force a re-link.
This speeds up an empty re-build enormously:
comet:~/tip/tools/perf> time make
...
real 0m0.207s
user 0m0.134s
sys 0m0.028s
[ This adds some coupling between the build dependencies of
libtraceevent and liblk - but until those stay relatively
simple this should not be an issue. ]
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
util/PERF-VERSION-GEN is currently executed on every build attempt,
and this script can take a lot of time on trees that are at a
significant git-distance from Linus's tree:
$ time util/PERF-VERSION-GEN
real 0m4.343s
user 0m4.176s
sys 0m0.140s
It also takes a lot of time if the Git repository is network attached, etc.,
because the commands it uses:
TAG=$(git describe --abbrev=0 --match "v[0-9].[0-9]*" 2>/dev/null )
has to count commits from the nearest tag and thus has to access (and
decompress) every git commit blob on the relevant version path.
Even on Linus's tree it takes 0.28 seconds on a fast box to count all the
commits and get the git version string:
$ time util/PERF-VERSION-GEN
real 0m0.279s
user 0m0.247s
sys 0m0.025s
But the version string only has to be regenerated if the git repository's
head commit changes. So add a dependency of ../../.git/HEAD and touch
the file every time it's regenerated, so that Make's build rules can
pick it up and cache the result:
make: `PERF-VERSION-FILE' is up to date.
real 0m0.184s
user 0m0.117s
sys 0m0.026s
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Doing a fresh install on a user home directory needs to first make sure
that the ~/libexec/perf-core/ directory is present so that
'perf-archive' like scripts, 'perf test' attr config files and 'perf
script' scripts can be installed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-z7ryi3r1b9dn9smbfnab0fdc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for parsing a non-sample event when there is more than one
selected event but no sample_id_all bit set.
The test fails because of a bug in the evlist logic. That is fixed in a
separate patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378325897-3840-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for the newly added PERF_COUNT_SW_DUMMY event. The test
checks that tracking events continue when an event is disabled but a
dummy software event is not disabled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377975053-3811-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test that checks that sample parsing is correctly implemented.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377591794-30553-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_evlist__config() must be moved to a separate source file to avoid
Python link errors when adding support for PERF_SAMPLE_IDENTIFIER.
It is appropriate to do this because perf_evlist__config() is a helper
function for event recording. It is used by tools to apply recording
options to perf_evlist. It is not used by the Python API.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377591794-30553-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
No need to install perl or python files when the respective
NO_LIBP{YTHON,ERL} define is set.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c69d4jz08gb1zm2vpervva2q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using the information in mmap events, perf tools can read object code
associated with sampled addresses. A test is added that compares bytes
read by perf with the same bytes read using objdump.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test uses the newly added cap_usr_time_zero and time_zero of
perf_event_mmap_page. TSC from rdtsc is compared with the time
from 2 perf events. The test passes if the calculated times are
all in the correct order.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1372425741-1676-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
perl.h from new Perl release doesn't like -Wundef and -Wswitch-default:
/usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT)
^
/usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if NO_TAINT_SUPPORT
^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0,
from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if NO_TAINT_SUPPORT
^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0,
from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if NO_TAINT_SUPPORT
^
In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0,
from /usr/lib/perl5/core_perl/CORE/perl.h:3480,
from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default]
switch( left )
^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default]
switch (rem) { \
^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default]
switch(bytes_in_carry) { /* how many bytes in carry */
^
Let's disable the warnings for code which uses perl.h.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Boris just raised another variant of building perf tools which is
broken:
$ make tools/perf
...
LINK /home/robert/cx/linux/tools/perf/perf
gcc: error: ../linux/tools/lib/lk/liblk.a: No such file or directory
The variant wasn't considered by:
107de37 perf tools: Fix build errors with O and DESTDIR make vars set
There are other variant of building perf too:
$ make -C tools perf
$ make -C tools/perf
Plus variants with O= and DESTDIR set.
This patch fixes the above and was tested with the following:
$ make O=... DESTDIR=... tools/perf
$ make O=... DESTDIR=... -C tools/ perf
$ make O=... DESTDIR=... -C tools/perf
$ make tools/perf
$ make -C tools/ perf
$ make -C tools/perf
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20130716145036.GH8731@rric.localhost
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Header files of libtraceevent or no longer local headers. Thus, use
default path notation for them. Also removing extra traceevent include
path and instead handle this similar to liblk.
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Link: http://lkml.kernel.org/r/1370964558-8599-1-git-send-email-rric@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixing build errors with O and DESTDIR make vars set:
$ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf
...
make[1]: Entering directory `.../.source/perf/tools/perf'
CC .../.build/perf/perf/util/parse-events.o
util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory
compilation terminated.
make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1
...
and:
LINK /.../.build/perf/perf/perf
gcc: error: /.../.build/perf/perf//.../.source/perf/tools/lib/lk/liblk.a: No such file or directory
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Link: http://lkml.kernel.org/r/1370964158-4135-1-git-send-email-rric@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding missing liblk.a dependency for python/perf.so.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-26-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
No need to use '?=' assignment for STRIP variable, the standard
'=' does the same job without creating confusion.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1369398928-9809-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Replacing tabs with spaces for all non-commands statements
in 'Makefile' and 'config/Makefile' files.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding NO_BIONIC variable to confiure bionic setup
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-22-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switching to full path C include directories, to make the includes
clear. Plus little include cleanup.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-21-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merging all *LDFLAGS* make variable into LDFLAGS to eliminate all
special *LDFLAGS* variables and make the setup clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-20-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merging all *CFLAGS* make variable into CFLAGS to eliminate all special
*_CFLAGS_* variables and make the setup clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-19-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Removing no longer needed ifdefs.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-18-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving paths config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving libnuma check config into config/Makefile
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-16-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving stdlib check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-15-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving libbfd check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-14-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving libpython check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-13-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving libperl check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moving gtk2 check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
