| Age | Commit message (Collapse) | Author |
|---|
|
required libraries
When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.
[yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
BUILD: Doing 'make -j4' parallel build
HOSTCC fixdep.o
HOSTLD fixdep-in.o
LINK fixdep
<stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
<stdin>:1:0: warning: -fsanitize=address not supported for this target
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:224: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
[yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
/usr/include/gnu/libc-version.h
After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.
Committer testing:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:401: *** No libasan found, please install libasan. Stop.
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
$
$ sudo dnf install libasan
<SNIP>
Installed:
libasan-9.3.1-2.fc31.x86_64
$
$
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
<SNIP>
CC /tmp/build/perf/util/pmu-flex.o
FLEX /tmp/build/perf/util/expr-flex.c
CC /tmp/build/perf/util/expr-bison.o
CC /tmp/build/perf/util/expr.o
CC /tmp/build/perf/util/expr-flex.o
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/parse-events.o
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
INSTALL python-scripts
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
$
And if we rebuild without -fsanitize-address:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
CC /tmp/build/perf/exec-cmd.o
<SNIP>
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch links perf with the libpfm4 library if it is available and
LIBPFM4 is passed to the build. The libpfm4 library contains hardware
event tables for all processors supported by perf_events. It is a helper
library that helps convert from a symbolic event name to the event
encoding required by the underlying kernel interface. This library is
open-source and available from: http://perfmon2.sf.net.
With this patch, it is possible to specify full hardware events by name.
Hardware filters are also supported. Events must be specified via the
--pfm-events and not -e option. Both options are active at the same time
and it is possible to mix and match:
$ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles ....
One needs to explicitely ask for its inclusion by using the LIBPFM4 make
command line option, ie its opt-in rather than opt-out of feature
detection and build support.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ingo reported that the libaudit was always appearing as OFF:
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ OFF ]
And everything seemed to work, i.e. we were checking for a feature that
we don't use, causing confusion for people building perf, so work to
remove that nuisance while making sure that it works when an arch
doesn't provide the alternative method to generate the syscall id/name
conversion tables.
Longer explanation of the new modus operandi:
$ make -C tools/perf O=/tmp/build/perf NO_SYSCALL_TABLE=1
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
Makefile.config:665: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
MKDIR /tmp/build/perf/fs/
<SNIP>
$
The libaudit test is forced and it fails when audit-libs-devel isn't available:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
test-libaudit.c:2:10: fatal error: libaudit.h: No such file or directory
2 | #include <libaudit.h>
| ^~~~~~~~~~~~
compilation terminated.
$
If we install audit-libs-devel and rebuild it continues not to be shown as OFF
in the main auto-detection summary, but again gets tested and this time:
$ rpm -q audit-libs-devel
audit-libs-devel-3.0-0.15.20191104git1c2f876.fc31.x86_64
$
The make output for the feature detection comes clean:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
And the feature detection binary is successfully built and is dynamicly linked
with libaudit:
$ ldd /tmp/build/perf/feature/test-libaudit.bin | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007f5bf5177000)
$
As well as the resulting perf binary:
$ ldd /tmp/build/perf/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fad511c7000)
$
And 'perf trace' works using the libaudit method:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.067 ms): sleep/281872 nanosleep(rqtp: 0x7ffedbbe69d0) = 0
$
If we leave audit-libs-devel installed but don't disable the use of the best
method, the one using SYSCALL_TABLE, the default for architectures that provide
the script to build the syscall id/name mapping using the .tbl files copied
from the kernel sources, we get:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make -C tools/perf O=/tmp/build/perf
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
<SNIP>
$
Again, no mention of libaudit being on or OFF and:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
cat: /tmp/build/perf/feature/test-libaudit.make.output: No such file or directory
$
We didn't even bother checking for its availability, slightly speeding up the
build process and:
$ ldd /tmp/build/perf/perf | grep libaudit
$
We don't link with it, also:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.053 ms): sleep/299125 nanosleep(rqtp: 0x7ffc24611b50) = 0
$
And globs become available:
$ sudo /tmp/build/perf/perf trace -e *sleep sleep 1
0.000 (1000.072 ms): sleep/299136 nanosleep(rqtp: 0x7ffe7a3c4ff0) = 0
$
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is useful to see if, on x86, the legacy libaudit still works, as it
is used in architectures that don't have the SYSCALL_TABLE logic and we
want to have it tested in 'make -C tools/perf/ build-test'.
E.g.:
Without having audit-libs-devel installed:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ OFF ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
<SNIP>
After installing it:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c'
diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000)
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To help in allowing to disable it from the make command line.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-2-acme@kernel.org
[ Fixed the logic for the filter part, it should be ifeq, not ifneq ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To be consistent with other such auto-detected features.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anand K Mistry <amistry@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Python 3.8 changed the output of 'python-config --ldflags' to no longer
include the '-lpythonX.Y' flag (this apparently fixed an issue loading
modules with a statically linked Python executable). The libpython
feature check in linux/build/feature fails if the Python library is not
included in FEATURE_CHECK_LDFLAGS-libpython variable.
This adds a check in the Makefile to determine if PYTHON_CONFIG accepts
the '--embed' flag and passes that flag alongside '--ldflags' if so.
tools/perf is the only place the libpython feature check is used.
Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The file handle (FHANDLE) support is configurable so some systems might not
have it. So add a config feature item to check it on build time so that we
don't add the cgroup tracking feature based on that.
Committer notes:
Had to make the test use the same construct as its later use in
synthetic-events.c, in the next patch in this series. i.e. make it be:
struct {
struct file_handle fh;
uint64_t cgroup_id;
} handle;
To cope with:
CC /tmp/build/perf/util/cloexec.o
util/synthetic-events.c:428:22: error: field 'fh' with CC /tmp/build/perf/util/call-path.o
variable sized type 'struct file_handle' not at the end of a struct or class is a GNU
extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct file_handle fh;
^
1 error generated.
Deal with this at some point, i.e. investigate if the right thing is to
remove that -Wgnu-variable-sized-type-not-at-end from our CFLAGS, for
now do the test the same way as it is used looks more sensible.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ split from a larger patch, removed blank line at EOF ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move libperf from its current location under tools/perf to a separate
directory under tools/lib/.
Also change various paths (mainly includes) to reflect the libperf move
to a separate directory and add a new directory under MANIFEST.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191206210612.8676-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we support only static linking with kernel's libbpf
(tools/lib/bpf). This patch adds libbpf package detection and support to
link perf with it dynamically.
The libbpf package status is displayed with:
$ make VF=1
Auto-detecting system features:
...
... libbpf: [ on ]
It's not checked by default, because it's quite new. Once it's on most
distros we can switch it on.
For the same reason it's not added to the test-all check.
Perf does not need advanced version of libbpf, so we can check just for
the base bpf_object__open function.
Adding new compile variable to detect libbpf package and link bpf
dynamically:
$ make LIBBPF_DYNAMIC=1
...
LINK perf
$ ldd perf | grep bpf
libbpf.so.0 => /lib64/libbpf.so.0 (0x00007f46818bc000)
If libbpf is not installed, build stops with:
Makefile.config:486: *** Error: No libbpf devel library found,\
please install libbpf-devel. Stop.
Committer testing:
$ make LIBBPF_DYNAMIC=1 -C tools/perf O=/tmp/build/perf
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Makefile.config:493: *** Error: No libbpf devel library found, please install libbpf-devel. Stop.
make[1]: *** [Makefile.perf:225: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191126121253.28253-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By using "make TCMALLOC=1" you can enable perf to be build for usage
with libtcmalloc.so (gperftools).
Get heap profile (tools/perf directory):
$ <install gperftools>
$ make TCMALLOC=1 DEBUG=1
$ HEAPPROFILE=/tmp/heapprof ./perf ...
$ pprof ./perf /tmp/heapprof.000*
(pprof) top
Total: 2335.5 MB
1735.1 74.3% 74.3% 1735.1 74.3% memdup
402.0 17.2% 91.5% 402.0 17.2% zalloc
140.2 6.0% 97.5% 145.8 6.2% map__new
33.6 1.4% 98.9% 33.6 1.4% symbol__new
12.4 0.5% 99.5% 12.4 0.5% alloc_event
6.2 0.3% 99.7% 6.2 0.3% nsinfo__new
5.5 0.2% 100.0% 5.5 0.2% nsinfo__copy
0.3 0.0% 100.0% 0.3 0.0% dso__new
0.1 0.0% 100.0% 0.1 0.0% do_read_string
0.0 0.0% 100.0% 0.0 0.0% __GI__IO_file_doallocate
See callstack:
$ pprof --pdf ./perf /tmp/heapprof.00* > callstack.pdf
$ pprof --web ./perf /tmp/heapprof.00*
Committer testing:
Install gperftools, on fedora:
# dnf install gperftools-devel
Then build:
$ make TCMALLOC=1 DEBUG=1 -C tools/perf O=/tmp/build/perf install-bin
Verify that it linked against the right library:
$ ldd ~/bin/perf | grep tcma
libtcmalloc.so.4 => /lib64/libtcmalloc.so.4 (0x00007fb2953a7000)
$
Run 'perf trace' system wide for 1 minute:
# HEAPPROFILE=/tmp/heapprof perf trace -a sleep 1m
<SNIP>
59985.524 ( 0.006 ms): Web Content/20354 recvmsg(fd: 9<socket:[1762817]>, msg: 0x7ffee5fdafb0) = -1 EAGAIN (Resource temporarily unavailable)
59985.536 ( 0.005 ms): Web Content/20354 recvmsg(fd: 9<socket:[1762817]>, msg: 0x7ffee5fdafc0) = -1 EAGAIN (Resource temporarily unavailable)
59981.956 (10.143 ms): SCTP timer/21716 ... [continued]: select()) = 0 (Timeout)
59985.549 ( ): Web Content/20354 poll(ufds: 0x7f1df38af180, nfds: 3, timeout_msecs: 4294967295) ...
0.926 (59999.481 ms): sleep/29764 ... [continued]: nanosleep()) = 0
59992.133 ( ): SCTP timer/21716 select(tvp: 0x7ff5bf7fee80) ...
60000.477 ( 0.009 ms): sleep/29764 close(fd: 1) = 0
60000.493 ( 0.005 ms): sleep/29764 close(fd: 2) = 0
60000.514 ( ): sleep/29764 exit_group() = ?
Dumping heap profile to /tmp/heapprof.0001.heap (Exiting, 3 MB in use)
[root@quaco ~]#
Install pprof:
# dnf install pprof
And run it:
# pprof ~/bin/perf /tmp/heapprof.0001.heap
Using local file /root/bin/perf.
Using local file /tmp/heapprof.0001.heap.
Welcome to pprof! For help, type 'help'.
(pprof) top
Total: 4.0 MB
1.7 42.0% 42.0% 2.2 54.1% map__new
0.9 23.3% 65.3% 0.9 23.3% zalloc
0.5 11.4% 76.7% 0.5 11.4% dso__new
0.2 5.6% 82.3% 0.3 8.5% trace__sys_enter
0.2 4.9% 87.2% 0.2 4.9% __GI___strdup
0.2 3.8% 91.0% 0.2 3.8% new_term
0.1 2.2% 93.2% 0.4 10.1% __perf_pmu__new_alias
0.0 1.0% 94.3% 0.0 1.2% event_read_fields
0.0 0.8% 95.1% 0.0 0.8% nsinfo__new
0.0 0.7% 95.8% 0.1 3.2% trace__read_syscall_info
(pprof)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191013151427.11941-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Andi reported that 'make DEBUG=1' does not propagate to the libbperf
code. It's true also for the other flags. Changing the code to propagate
the global build flags to libperf compilation.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011122155.15738-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With Java 11 there is no seperate JRE anymore.
Details:
https://coderanch.com/t/701603/java/JRE-JDK
Therefore the detection of the JRE needs to be adapted.
This change works for s390 and x86. I have not tested other platforms.
Committer testing:
Continues to work with the OpenJDK 8:
$ rm -f ~acme/lib64/libperf-jvmti.so
$ rpm -qa | grep jdk-devel
java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
$ git log --oneline -1
a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
$ ls -la ~acme/lib64/libperf-jvmti.so
-rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
$
Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improved kbprobes robustness
- Intel PEBS support for PT hardware tracing
- Other Intel PT improvements: high order pages memory footprint
reduction and various related cleanups
- Misc cleanups
The perf tooling side has been very busy in this cycle, with over 300
commits. This is an incomplete high-level summary of the many
improvements done by over 30 developers:
- Lots of updates to the following tools:
'perf c2c'
'perf config'
'perf record'
'perf report'
'perf script'
'perf test'
'perf top'
'perf trace'
- Updates to libperf and libtraceevent, and a consolidation of the
proliferation of x86 instruction decoder libraries.
- Vendor event updates for Intel and PowerPC CPUs,
- Updates to hardware tracing tooling for ARM and Intel CPUs,
- ... and lots of other changes and cleanups - see the shortlog and
Git log for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits)
kprobes: Prohibit probing on BUG() and WARN() address
perf/x86: Make more stuff static
x86, perf: Fix the dependency of the x86 insn decoder selftest
objtool: Ignore intentional differences for the x86 insn decoder
objtool: Update sync-check.sh from perf's check-headers.sh
perf build: Ignore intentional differences for the x86 insn decoder
perf intel-pt: Use shared x86 insn decoder
perf intel-pt: Remove inat.c from build dependency list
perf: Update .gitignore file
objtool: Move x86 insn decoder to a common location
perf metricgroup: Support multiple events for metricgroup
perf metricgroup: Scale the metric result
perf pmu: Change convert_scale from static to global
perf symbols: Move mem_info and branch_info out of symbol.h
perf auxtrace: Uninline functions that touch perf_session
perf tools: Remove needless evlist.h include directives
perf tools: Remove needless evlist.h include directives
perf tools: Remove needless thread_map.h include directives
perf tools: Remove needless thread.h include directives
perf tools: Remove needless map.h include directives
...
|
|
This patch adds support for DWARF register mappings and libdw registers
initialization, which is used by perf callchain analyzing when
--call-graph=dwarf is given.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: linux-riscv <linux-riscv@lists.infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guo Ren <guoren@kernel.org>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The next cset will grap const.h copies from the kernel to keep bits.h
in sync as it started to use linux/const.h, that in turn includes
uapi/linux/const.h.
So now we have a file with the same name in tools/include and
tools/uapi/include, and one includes the other, we need to have
tools/include/uapi/ after tools/include/ for this to work, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qzjqxa1wdrt51kwadyqawnuj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add utilities to help checking capabilities of the running procss. Make
perf link with libcap, if it is available. If no libcap-dev[el], assume
no capabilities.
Committer testing:
$ make O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
<SNIP>
... libbfd: [ on ]
... libcap: [ OFF ]
... libelf: [ on ]
<SNIP>
Makefile.config:833: No libcap found, disables capability support, please install libcap-devel/libcap-dev
<SNIP>
$ grep libcap /tmp/build/perf/FEATURE-DUMP
feature-libcap=0
$ cat /tmp/build/perf/feature/test-libcap.make.output
test-libcap.c:2:10: fatal error: sys/capability.h: No such file or directory
2 | #include <sys/capability.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
$
Now install libcap-devel and try again:
$ make O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h'
diff -u tools/include/linux/bits.h include/linux/bits.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Auto-detecting system features:
<SNIP>
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
<SNIP>>
CC /tmp/build/perf/jvmti/libjvmti.o
<SNIP>>
$ grep libcap /tmp/build/perf/FEATURE-DUMP
feature-libcap=1
$ cat /tmp/build/perf/feature/test-libcap.make.output
$ ldd /tmp/build/perf/feature/test-libcap.make.bin
ldd: /tmp/build/perf/feature/test-libcap.make.bin: No such file or directory
$ ldd /tmp/build/perf/feature/test-libcap.bin
linux-vdso.so.1 (0x00007ffc35bfe000)
libcap.so.2 => /lib64/libcap.so.2 (0x00007ff9c62ff000)
libc.so.6 => /lib64/libc.so.6 (0x00007ff9c6139000)
/lib64/ld-linux-x86-64.so.2 (0x00007ff9c6326000)
$
Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
[ split from a larger patch ]
Link: http://lkml.kernel.org/r/8a1e76cf5c7c9796d0d4d240fbaa85305298aafa.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add an empty libperf.a under tools/perf/lib and link it with perf.
It can also be built separately with:
$ cd tools/perf/lib && make
CC core.o
LD libperf-in.o
AR libperf.a
LINK libperf.so
Committer testing:
$ make O=/tmp/build/perf -C tools/perf/lib/
make: Entering directory '/home/acme/git/perf/tools/perf/lib'
LINK /tmp/build/perf/libperf.so
make: Leaving directory '/home/acme/git/perf/tools/perf/lib'
$ ls -la /tmp/build/perf/libperf.so
-rwxrwxr-x. 1 acme acme 16232 Jul 22 15:30 /tmp/build/perf/libperf.so
$ file /tmp/build/perf/libperf.so
/tmp/build/perf/libperf.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=7a51d227d871b381ddb686dcf94145c4dd908221, not stripped
$ git status tools/perf
On branch perf/core
nothing to commit, working tree clean
$
$ ls -lart tools/perf/lib/
total 16
drwxrwxr-x. 16 acme acme 4096 Jul 22 15:29 ..
-rw-rw-r--. 1 acme acme 1633 Jul 22 15:29 Makefile
-rw-rw-r--. 1 acme acme 0 Jul 22 15:29 core.c
-rw-rw-r--. 1 acme acme 20 Jul 22 15:29 Build
drwxrwxr-x. 2 acme acme 4096 Jul 22 15:29 .
$
Committer notes:
Need to add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
-I$(srctree)/tools/include/uapi to tools/perf/lib/Makefile's INCLUDE
variable to pick up the latest versions of kernel headers, even in older
systems, this is in line with what is in tools/lib/bpf/Makefile.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some distros slang.h may be in a /usr/include 'slang' subdir, so use
the if slang is not explicitely disabled (by using NO_SLANG=1) and its
feature test for the common case (having /usr/include/slang.h) failed,
use the results for the test that checks if it is in slang/slang.h.
Change the only file in perf that includes slang.h to use
HAVE_SLANG_INCLUDE_SUBDIR and forget about this for good.
On a rhel6 system now we have:
$ /tmp/build/perf/perf -vv | grep slang
libslang: [ on ] # HAVE_SLANG_SUPPORT
$ ldd /tmp/build/perf/perf | grep libslang
libslang.so.2 => /usr/lib64/libslang.so.2 (0x00007fa2d5a8d000)
$ grep slang /tmp/build/perf/FEATURE-DUMP
feature-libslang=0
feature-libslang-include-subdir=1
$ cat /etc/redhat-release
CentOS release 6.10 (Final)
$
While on fedora:29:
$ /tmp/build/perf/perf -vv | grep slang
libslang: [ on ] # HAVE_SLANG_SUPPORT
$ ldd /tmp/build/perf/perf | grep slang
libslang.so.2 => /lib64/libslang.so.2 (0x00007f8eb11a7000)
$ grep slang /tmp/build/perf/FEATURE-DUMP
feature-libslang=1
feature-libslang-include-subdir=1
$
$ cat /etc/fedora-release
Fedora release 29 (Twenty Nine)
$
The feature-libslang-include-subdir=1 line is because the 'gettid()'
test was added to test-all.c as the new glibc has an implementation for
that, so we soon should have it not failing, i.e. should be the common
case soon. Perhaps I should move it out till it becomes the norm...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang")
Link: https://lkml.kernel.org/n/tip-bkgtpsu3uit821fuwsdhj9gd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Hardcoding /usr/include/slang is fundamentally incompatible with cross
compilation and will lead to the inability for a cross-compiled
environment to properly detect whether slang is available or not.
If /usr/include/slang is necessary that is a distribution specific
knowledge that could be solved with either a standard pkg-config .pc
file (which slang has) or simply overriding CFLAGS accordingly, but the
default perf Makefile should be clean of all of that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Stanislav Fomichev <sdf@google.com>
Fixes: ef7b93a11904 ("perf report: Librarize the annotation code and use it in the newt browser")
Link: http://lkml.kernel.org/r/20190614183949.5588-1-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Laura reported that the perf build failed in fedora when we got a glibc
that provides gettid(), which I reproduced using fedora rawhide with the
glibc-devel-2.29.9000-26.fc31.x86_64 package.
Add a feature check to avoid providing a gettid() helper in such
systems.
On a fedora rawhide system with this patch applied we now get:
[root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP
feature-gettid=1
[root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output
[root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin
linux-vdso.so.1 (0x00007ffc6b1f6000)
libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000)
/lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000)
[root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid
U gettid@@GLIBC_2.30
[root@7a5f55352234 perf]#
While on a fedora:29 system:
[acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP
feature-gettid=0
[acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output
test-gettid.c: In function ‘main’:
test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
return gettid();
^~~~~~
getgid
cc1: all warnings being treated as errors
[acme@quaco perf]$
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When operating in CPU-wide trace mode with a source/sink topology of N:1
packets with multiple traceID will end up in the same cs_etm_queue. In
order to properly decode packets they need to be split in different
queues, i.e one queue per traceID.
As such add support for multiple traceID per cs_etm_queue by adding a
new cs_etm_traceid_queue every time a new traceID is discovered in the
trace stream.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-15-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://github.com/c-sky/csky-linux
Pull arch/csky perf update from Guo Ren:
"Add support for perf unwind-libdw"
* tag 'csky-for-linus-5.2-perf-unwind-libdw' of git://github.com/c-sky/csky-linux:
csky: Add support for perf unwind-libdw
|
|
This patch add support for DWARF register mappings and libdw registers
initialization, which is used by perf callchain analyzing, eg:
perf record --call-graph=dwarf <COMMAND>
Here is elfutils csky backend patch set:
https://sourceware.org/ml/elfutils-devel/2019-q2/msg00007.html
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arnd.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main kernel changes were:
- add support for Intel's "adaptive PEBS v4" - which embedds LBS data
in PEBS records and can thus batch up and reduce the IRQ (NMI) rate
significantly - reducing overhead and making call-graph profiling
less intrusive.
- add Intel CPU core and uncore support updates for Tremont, Icelake,
- extend the x86 PMU constraints scheduler with 'constraint ranges'
to better support Icelake hw constraints,
- make x86 call-chain support work better with CONFIG_FRAME_POINTER=y
- misc other changes
Tooling changes:
- updates to the main tools: 'perf record', 'perf trace', 'perf
stat'
- updated Intel and S/390 vendor events
- libtraceevent updates
- misc other updates and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER
watchdog: Fix typo in comment
perf/x86/intel: Add Tremont core PMU support
perf/x86/intel/uncore: Add Intel Icelake uncore support
perf/x86/msr: Add Icelake support
perf/x86/intel/rapl: Add Icelake support
perf/x86/intel/cstate: Add Icelake support
perf/x86/intel: Add Icelake support
perf/x86: Support constraint ranges
perf/x86/lbr: Avoid reading the LBRs when adaptive PEBS handles them
perf/x86/intel: Support adaptive PEBS v4
perf/x86/intel/ds: Extract code of event update in short period
perf/x86/intel: Extract memory code PEBS parser for reuse
perf/x86: Support outputting XMM registers
perf/x86/intel: Force resched when TFA sysctl is modified
perf/core: Add perf_pmu_resched() as global function
perf/headers: Fix stale comment for struct perf_addr_filter
perf/core: Make perf_swevent_init_cpu() static
perf/x86: Add sanity checks to x86_schedule_events()
perf/x86: Optimize x86_schedule_events()
...
|
|
Thomas Backlund reported that the perf build was failing on the Mageia 7
distro, that is because it uses:
cat /tmp/build/perf/feature/test-disassembler-four-args.make.output
/usr/bin/ld: /usr/lib64/libbfd.a(plugin.o): in function `try_load_plugin':
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:243:
undefined reference to `dlopen'
/usr/bin/ld:
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:271:
undefined reference to `dlsym'
/usr/bin/ld:
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:256:
undefined reference to `dlclose'
/usr/bin/ld:
/home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:246:
undefined reference to `dlerror'
as we allow dynamic linking and loading
Mageia 7 uses these linker flags:
$ rpm --eval %ldflags
-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags
So add -ldl to this feature LDFLAGS.
Reported-by: Thomas Backlund <tmb@mageia.org>
Tested-by: Thomas Backlund <tmb@mageia.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/r/20190501173158.GC21436@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement libzstd feature check, NO_LIBZSTD and LIBZSTD_DIR defines to
override Zstd library sources or disable the feature from the command
line:
$ make -C tools/perf LIBZSTD_DIR=/path/to/zstd/sources/ clean all
$ make -C tools/perf NO_LIBZSTD=1 clean all
Auto detection feature status is reported just before compilation
starts. If your system has some version of the zstd library
preinstalled then the build system finds and uses it during the build.
If you still prefer to compile with some other version of zstd library
you have capability to refer the compilation to that version using
LIBZSTD_DIR define.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/9b4cd8b0-10a3-1f1e-8d6b-5922a7ca216b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils
repo, which changed the disassembler() function signature, so we must
use the feature test introduced in fb982666e380 ("tools/bpftool: fix
bpftool build with bintutils >= 2.9") to deal with that.
Committer testing:
After adding the missing function call to test-all.c, and:
FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes
And the fallbacks for cases where we need -liberty and sometimes -lz to
tools/perf/Makefile.config, we get:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... disassembler-four-args: [ on ]
CC /tmp/build/perf/jvmti/libjvmti.o
CC /tmp/build/perf/builtin-bench.o
<SNIP>
$
$
The feature detection test-all.bin gets successfully built and linked:
$ ls -la /tmp/build/perf/feature/test-all.bin
-rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin
$ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler
0000000000061f90 T disassembler
$
Time to move on to the patches that make use of this disassembler()
routine in binutils's libopcodes.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Both libbfd and libopcodes are distributed with binutil-dev/devel. When
libbfd is present, it is OK to assume that libopcodes also present. This
has been a safe assumption for bpftool.
This patch adds -lopcodes to perf/Makefile.config. libopcodes will be
used in the next commit for BPF annotation.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-12-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the libcrypto feature test was added we forgot to add its
FEATURE_CHECK_LDFLAGS pointing to the library needed to link with the
test-all.bin feature test fast path binary, so even when it was
introduced we got this:
$ cat /tmp/build/perf/feature/test-all.make.output
/usr/bin/ld: /tmp/ccjKeJJU.o: in function `main_test_libcrypto':
/home/acme/git/perf/tools/build/feature/test-libcrypto.c:10: undefined reference to `MD5_Init'
/usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:11: undefined reference to `MD5_Update'
/usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:12: undefined reference to `MD5_Final'
/usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:14: undefined reference to `SHA1'
collect2: error: ld returned 1 exit status
$ cat /tmp/build/perf/feature/test-libcrypto.
test-libcrypto.bin test-libcrypto.d test-libcrypto.make.output
$ cat /tmp/build/perf/feature/test-libcrypto.make.output
$
Fix it, so that we keep the fast path, which, at this point, will fail
with the unwind-ARCH feature tests, that will be fixed in a followup
patch:
$ make -C tools/perf O=/tmp/build/perf
... libcrypto: [ on ]
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
$ ldd /tmp/build/perf/feature/test-all.bin | grep libcrypto
libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f9892805000)
$
$ grep libcrypto /tmp/build/perf/FEATURE-DUMP
feature-libcrypto=1
$
With the unwind-ARCH tests fixed, we now finally manage to get
test-all.bin built and linked with the features it tests, among them the
ones fixed in this patchkit:
$ ldd /tmp/build/perf/feature/test-all.bin | egrep 'unwind|crypto'
libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f95cf2b8000)
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f95cf294000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f95cf278000)
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: 8ee4646038e4 ("perf build: Add libcrypto feature detection")
Link: https://lkml.kernel.org/n/tip-rexc248jorf5b4l3qjn888cz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As it is not normally available on x86_64 not being tested on test-all.c
but being in FEATURE_TESTS_BASIC ends up implying that those features
are present, which leads to trying to link with those libraries and a
build failure now that test-all.c is finally again building
successfully:
/usr/bin/ld: cannot find -lunwind-x86
/usr/bin/ld: cannot find -lunwind-aarch64
collect2: error: ld returned 1 exit status
make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1
make[3]: *** Waiting for unfinished jobs....
/usr/bin/ld: cannot find -lunwind-x86
/usr/bin/ld: cannot find -lunwind-aarch64
So remove those features from there and explicitely test them.
And then move this patch to just before the last one that allows this to
be exposed, so that we keep the tree bisectable.
With all this in place we get, at this point:
$ ldd /tmp/build/perf/feature/test-libunwind.bin
linux-vdso.so.1 (0x00007fffa09c6000)
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000)
libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000)
/lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000)
libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000)
$ cat /tmp/build/perf/feature/test-libunwind-x86.make.output
test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory
#include <libunwind-x86.h>
^~~~~~~~~~~~~~~~~
compilation terminated.
$ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output
test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory
#include <libunwind-aarch64.h>
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
$
$ ldd ~/bin/perf | grep unwind
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000)
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since it is not yet that generally available, avoid testing for the
presence of libcoresight in the fast path test-all.bin feature test.
# dnf search opencsd
No matches found.
# dnf search OpenCSD
No matches found.
# cat /etc/fedora-release
Fedora release 29 (Twenty Nine)
#
I.e. right now, in my system test-all.bin is failing all the time since
Fedora29 doesn't have libopencsd available:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:174:
test-libopencsd.c:2:10: fatal error: opencsd/c_api/opencsd_c_api.h: No such file or directory
#include <opencsd/c_api/opencsd_c_api.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
See:
6ab2b762befd ("perf build: Disable libbabeltrace check by default")
For the rationale, as soon as libopencsd becomes more generally packaged
and available, we do the same thing we did with babeltrace, enabling it
by default, as done in:
24787afbcd01 ("perf tools: Enable LIBBABELTRACE by default")
For now, to explicitely ask for opencsd, make sure you have it installed
and use:
make -C tools/perf CORESIGHT=1
The feature test output will be there as an empty file:
$ ls -la /tmp/build/perf/feature/test-libopencsd.make.output
Because the binary used for the feature check was successfully built:
$ ls -la /tmp/build/perf/feature/test-libopencsd.bin
-rwxrwxr-x. 1 acme acme 18336 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.bin
$ ldd /tmp/build/perf/feature/test-libopencsd.bin
linux-vdso.so.1 (0x00007fffe18cc000)
libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fb8e67f6000)
libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fb8e676f000)
libc.so.6 => /lib64/libc.so.6 (0x00007fb8e65a9000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fb8e6411000)
libm.so.6 => /lib64/libm.so.6 (0x00007fb8e628d000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fb8e6272000)
/lib64/ld-linux-x86-64.so.2 (0x00007fb8e6828000)
$
And the resulting perf binary will be linked with it:
-rw-rw-r--. 1 acme acme 0 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.make.output
$ ldd ~/bin/perf | grep opencsd
libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fd43097f000)
libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fd4308f8000)
$
To make sure this gets built before pushing things upstream I have a
ubuntu:19.04-x-arm64 container that has:
[root@quaco x-arm64]# grep CORESIGHT Dockerfile
ENV EXTRA_MAKE_ARGS=CORESIGHT=1
[root@quaco x-arm64]#
So that I always build with libopencsd before pushing things upstream.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-20vyy39jw9jgrijesi30fgox@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since we need it to resolve the AIO symbols, otherwise we fail with:
$ cat /tmp/build/perf/feature/test-all.make.output
/usr/bin/ld: /tmp/ccEqrj36.o: undefined reference to symbol 'aio_return64@@GLIBC_2.2.5'
/usr/bin/ld: //usr/lib64/librt.so.1: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
$
When we added the aio support in 'perf record' only the test-libaio.bin
target got the -lrt, i.e. the feature detection slow path. Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 2a07d814747b ("tools build feature: Check if libaio is available")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
and -lz
Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:
feature-libbfd - only link against -lbfd (debian),
see commit 2cf9040714f3 ("perf tools: Fix bfd
dependency libraries detection")
feature-libbfd-liberty - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
see commit 280e7c48c3b8 ("perf tools: fix BFD
detection on opensuse")
(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)
The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).
Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are systems such as the Android NDK API level 24 has the
open_memstream() function but doesn't provide a prototype, adding noise
to the build:
builtin-timechart.c: In function 'cat_backtrace':
builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration]
FILE *f = open_memstream(&p, &p_len);
^
builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs]
builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast
FILE *f = open_memstream(&p, &p_len);
^
Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that
can get a prototype.
Checked in the bionic git repo to be available since level 23:
https://android.googlesource.com/platform/bionic/+/master/libc/include/stdio.h#241
FILE* open_memstream(char** __ptr, size_t* __size_ptr) __INTRODUCED_IN(23);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-343ashae97e5bq6vizusyfno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are systems such as the Android NDK API level 24 has the
sigqueue() function but doesn't provide a prototype, adding noise to the
build:
util/evlist.c: In function 'perf_evlist__prepare_workload':
util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration]
if (sigqueue(getppid(), SIGUSR1, val))
^
util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs]
Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can
get a prototype.
Checked in the bionic git repo to be available since level 23:
https://android.googlesource.com/platform/bionic/+/master/libc/include/signal.h#123
int sigqueue(pid_t __pid, int __signal, const union sigval __value) __INTRODUCED_IN(23);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lmhpev1uni9kdrv7j29glyov@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This will be used by 'perf record' to speed up reading the perf ring
buffer.
Committer testing:
$ make -C tools/perf O=/tmp/build/perf
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
$ ls -la /tmp/build/perf/feature/test-libaio.*
-rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin
-rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d
-rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output
$
$ grep -i aio /tmp/build/perf/FEATURE-DUMP
feature-libaio=1
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In debian/ubuntu its libssl-dev, but for fedora/RHEL/Centos/etc its
openssl-devel, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8ee4646038e4 ("perf build: Add libcrypto feature detection")
Link: https://lkml.kernel.org/n/tip-lnxqszts6aq2c9jy4b7mlnym@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The Compiled Method Load Record (cmlr) is JDK specific interface to
access JVM stack info. This makes the jvmti agent code not compile under
another jdk, which does not support that.
Separating jvmti cmlr check into special feature check, and adding
HAVE_JVMTI_CMLR macro to indicate that.
Mark cmlr code in jvmti/libjvmti.c with HAVE_JVMTI_CMLR, so we can
compile it on system without cmlr support.
This change makes the jvmti compile with java-1.8.0-ibm package. It's
without the line numbers support, but the rest works.
Adding NO_JVMTI_CMLR compile variable for testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20181121154341.21521-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A new 'perf bench epoll' will use this, and to disable it for older
systems, add a feature test for this API.
This is just a simple program that if successfully compiled, means that
the feature is present, at least at the library level, in a build that
sets the output directory to /tmp/build/perf (using O=/tmp/build/perf),
we end up with:
$ ls -la /tmp/build/perf/feature/test-eventfd*
-rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin
-rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d
-rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output
$ ldd /tmp/build/perf/feature/test-eventfd.bin
linux-vdso.so.1 (0x00007fff3bf3f000)
libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000)
/lib64/ld-linux-x86-64.so.2 (0x00007fa984417000)
$ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP
feature-dwarf=1
feature-dwarf_getlocations=1
feature-eventfd=1
feature-fortify-source=1
feature-sync-compare-and-swap=1
$
The main thing here is that in the end we'll have -DHAVE_EVENTFD in
CFLAGS, and then the 'perf bench' entry needing that API can be
selectively pruned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As the namespace support code will use this, which is not available in
some non _GNU_SOURCE libraries such as Android's bionic used in my
container build tests (r12b and r15c at the moment).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When a build is run from something like a cron job, the user's $PATH is
rather minimal, of note, not including /usr/sbin in my own case. Because
of that, an automated rpm package build ultimately fails to find
libperf-jvmti.so, because somewhere within the build, this happens...
/bin/sh: alternatives: command not found
/bin/sh: alternatives: command not found
Makefile.config:849: No openjdk development package found, please install
JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
...and while the build continues, libperf-jvmti.so isn't built, and
things fall down when rpm tries to find all the %files specified. Exact
same system builds everything just fine when the job is launched from a
login shell instead of a cron job, since alternatives is in $PATH, so
openjdk is actually found.
The test required to get into this section of code actually specifies
the full path, as does a block just above it, so let's do that here too.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Fixes: d4dfdf00d43e ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.
However all listed examples are installing its header files in
/usr/lib/<tool-name>/...[/include]/header.h
and not in
/usr/lib/include/<tool-name>/.../header.h.
Background information:
Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.
In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem. One of those
paths should contain header files like stdbool.h.
In order to get this path, gcc is invoked with:
- on Fedora 28 (with 4.18 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
=> If perf is installed, this is: /usr/lib/include
On my machine this directory is only containing the directory "perf".
If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include
- on Ubuntu 18.04 (with 4.15 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
=> gcc returns the correct path even if perf is installed.
In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.
To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h
Output before using the command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/include/perf/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Output after using command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/perf/include/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Committer testing:
While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.
We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:
# tail -8 /root/lib/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4
0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5
0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ...
0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6
0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987
0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ...
0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0
#
Suggested-by: Stefan Liebler <stli@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 1b16fffa389d ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
It also enables users to specify wildcards, for example, perf trace -e
'open*', just like was already possible on x86, s390, and powerpc, which
means arm64 can now pass the "Check open filename arg using perf trace +
vfs_getname" test.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163454.f714b9ab49ecc8566a0b3565@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Builds started failing in Fedora on Python 3.7 with:
`.gnu.debuglto_.debug_macro' referenced in section
`.gnu.debuglto_.debug_macro' of
util/scripting-engines/trace-event-python.o: defined in discarded
section
In Fedora, Python 3.7 added -flto to the list of --cflags and since it
was only applied to util/scripting-engines/trace-event-python.c and
scripts/python/Perf-Trace-Util/Context.c, linking failed.
It's not the first time the addition of flags has broken builds: commit
c6707fdef7e2 ("perf tools: Fix up build in hardnened environments")
appears to have fixed a similar problem. "python-config --includes"
provides the proper -I flags and doesn't introduce additional CFLAGS.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180710154612.6285-1-jcline@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The first one is the bare minimum that bpf infrastructure accepts before
it expects actual events to be set up:
$ cat tools/perf/examples/bpf/empty.c
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
$
If you remove that "version" line, then it will be refused with:
# perf trace -e tools/perf/examples/bpf/empty.c
event syntax error: 'tools/perf/examples/bpf/empty.c'
\___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
The next ones will, step by step, show simple filters, then the needs
for headers will be made clear, it will be put in place and tested with
new examples, rinse, repeat.
Back to using this first one to test the perf+bpf infrastructure:
If we run it will fail, as no functions are present connecting with,
say, a tracepoint or a function using the kprobes or uprobes
infrastructure:
# perf trace -e tools/perf/examples/bpf/empty.c
WARNING: event parser found nothing
invalid or unsupported event: 'tools/perf/examples/bpf/empty.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
But, if we set things up to dump the generated object file to a file,
and do this after having run 'make install', still on the developer's
$HOME directory:
# cat ~/.perfconfig
[llvm]
dump-obj = true
#
# perf trace -e ~acme/lib/examples/perf/bpf/empty.c
LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o
WARNING: event parser found nothing
invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c'
<SNIP>
#
We can look at the dumped object file:
# ls -la ~acme/lib/examples/perf/bpf/empty.o
-rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o
# file ~acme/lib/examples/perf/bpf/empty.o
/home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped
# readelf -sw ~acme/lib/examples/perf/bpf/empty.o
Symbol table '.symtab' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license
2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version
#
# tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o
null
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We'll start putting headers for helpers to be used in eBPF proggies in
there:
# perf trace -v --no-syscalls -e empty.c |& grep "llvm compiling command : "
llvm compiling command : /usr/lib64/ccache/clang -D__KERNEL__ -D__NR_CPUS__=4 -DLINUX_VERSION_CODE=0x41100 -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h -I/home/acme/lib/include/perf/bpf -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/4.17.0-rc3-00034-gf4ef6a438cee/build -c /home/acme/bpf/empty.c -target bpf -O2 -o -
#
Notice the "-I/home/acme/lib/include/perf/bpf"
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6xq94xro8xlb5s9urznh3f9k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To be consistent with other HAVE_XXX_SUPPORT uses in Makefile.config,
this patch renames HAVE_SYSCALL_TABLE to HAVE_SYSCALL_TABLE_SUPPORT and
updates the C code accordingly.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1523269609-28824-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Give as examples of package names to install to have this built for
fedora and debian, to help the user a bit.
The part from 'e.g.:' onwards:
No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-edbi4r2pvzn7no6ebxbtczng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
