summaryrefslogtreecommitdiff
path: root/tools/perf/Documentation/perf-report.txt
AgeCommit message (Collapse)Author
2014-12-01perf report: Add --branch-history optionAndi Kleen
Add a --branch-history option to perf report that changes all the settings necessary for using the branches in callstacks. This is just a short cut to make this nicer to use, it does not enable any functionality by itself. v2: Change sort order. Rename option to --branch-history to be less confusing. v3: Updates v4: Fix conflict with newer perf base v5: Port to latest tip v6: Add more comments. Remove CCKEY_ADDRESS setting. Remove unnecessary branch_mode setting. Use a boolean. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-5-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-01perf callchain: Support handling complete branch stacks as histogramsAndi Kleen
Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Disable kernel symbol demangling by defaultAvi Kivity
Some Linux symbols (for example __vt_event_wait) are interpreted by the demangler as C++ mangled names, which of course they aren't. Disable kernel symbol demangling by default to avoid this, and allow enabling it with a new option --demangle-kernel for those who wish it. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Avi Kivity <avi@cloudius-systems.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1410581705-26968-1-git-send-email-avi@cloudius-systems.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12perf top: Add -w option for setting column widthNamhyung Kim
Add -w/--column-widths option like perf report does so that users are able to see symbols even with some very long C++ library/functions. It can be a list separated by comma for each column. $ perf top -w 0,20,30 The value of 0 means there's no limit. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1406785662-5534-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-09perf tools: Add dcacheline sortDon Zickus
In perf's 'mem-mode', one can get access to a whole bunch of details specific to a particular sample instruction. A bunch of those details relate to the data address. One interesting thing you can do with data addresses is to convert them into a unique cacheline they belong too. Organizing these data cachelines into similar groups and sorting them can reveal cache contention. This patch creates an alogorithm based on various sample details that can help group entries together into data cachelines and allows 'perf report' to sort on it. The algorithm relies on having proper mmap2 support in the kernel to help determine if the memory map the data address belongs to is private to a pid or globally shared. The alogortithm is as follows: o group cpumodes together o group entries with discovered maps together o sort on major, minor, inode and inode generation numbers o if userspace anon, then sort on pid o sort on cachelines based on data addresses The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'. Sample output: # # Samples: 206 of event 'cpu/mem-loads/pp' # Total weight : 2534 # Sort order : dcacheline,pid # # Overhead Samples Data Cacheline Command: Pid # ........ ............ ...................................................................... .................. # 13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0 9.27% 1 [k] 0xffff88082e8cea80 swapper: 0 3.59% 2 [k] 0xffffffff819ba180 swapper: 0 0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0 0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0 Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column from prematurely tabbing over and mis-aligning. Not sure what the problem is. Signed-off-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-09perf report: Add mem-mode documentation to report commandDon Zickus
Add mem-mode sorting types and mem-mode itself to perf-report documentation. Signed-off-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1400526833-141779-5-git-send-email-dzickus@redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-01perf report: Add --children optionNamhyung Kim
The --children option is for showing accumulated overhead (period) value as well as self overhead. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arun Sharma <asharma@fb.com> Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1401335910-16832-16-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-21perf report: Add -F option to specify output fieldsNamhyung Kim
The -F/--fields option is to allow user setup output field in any order. It can receive any sort keys and following (hpp) fields: overhead, overhead_sys, overhead_us, sample and period If guest profiling is enabled, overhead_guest_{sys,us} will be available too. The output fields also affect sort order unless you give -s/--sort option. And any keys specified on -s option, will also be added to the output field list automatically. $ perf report -F sym,sample,overhead ... # Symbol Samples Overhead # .......................... ............ ........ # [.] __cxa_atexit 2 2.50% [.] __libc_csu_init 4 5.00% [.] __new_exitfn 3 3.75% [.] _dl_check_map_versions 1 1.25% [.] _dl_name_match_p 4 5.00% [.] _dl_setup_hash 1 1.25% [.] _dl_sysdep_start 1 1.25% [.] _init 5 6.25% [.] _setjmp 6 7.50% [.] a 8 10.00% [.] b 8 10.00% [.] brk 1 1.25% [.] c 8 10.00% Note that, the example output above is captured after applying next patch which fixes sort/comparing behavior. Requested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-21perf tools: Allow hpp fields to be sort keysNamhyung Kim
Add overhead{,_sys,_us,_guest_sys,_guest_us}, sample and period sort keys so that they can be selected with --sort/-s option. $ perf report -s period,comm --stdio ... # Overhead Period Command # ........ ............ ............... # 47.06% 152 swapper 13.93% 45 qemu-system-arm 12.38% 40 synergys 3.72% 12 firefox 2.48% 8 xchat Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1400480762-22852-9-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-04-16perf report: Add --percentage optionNamhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute". "relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied. $ perf report -s comm # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc 6.11% as 4.35% sh 4.14% make 1.13% fixdep ... $ perf report -s comm -c cc1,gcc --percentage absolute # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc $ perf report -s comm -c cc1,gcc --percentage relative # Overhead Command # ........ ............ # 90.69% cc1 9.31% gcc Note that it has zero effect if no filter was applied. Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2013-12-10perf report: Add --header/--header-only optionsJiri Olsa
Currently the perf.data header is always displayed for stdio output, which is no always useful. Disabling header information by default and adding following options to control header output: --header - display header information (old default) --header-only - display header information only w/o further processing, forces stdio output Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1386583370-1699-2-git-send-email-jolsa@redhat.com [ Added single line explaining talking about the new --header* options, to address David Ahern comment; better man page entry for the new options, from Namhyung Kim ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-21perf report: Add --max-stack option to limit callchain stack scanWaiman Long
When callgraph data was included in the perf data file, it may take a long time to scan all those data and merge them together especially if the stored callchains are long and the perf data file itself is large, like a Gbyte or so. The callchain stack is currently limited to PERF_MAX_STACK_DEPTH (127). This is a large value. Usually the callgraph data that developers are most interested in are the first few levels, the rests are usually not looked at. This patch adds a new --max-stack option to perf-report to limit the depth of callchain stack data to look at to reduce the time it takes for perf-report to finish its processing. It trades the presence of trailing stack information with faster speed. The following table shows the elapsed time of doing perf-report on a perf.data file of size 985,531,828 bytes. --max_stack Elapsed Time Output data size ----------- ------------ ---------------- not set 88.0s 124,422,651 64 87.5s 116,303,213 32 87.2s 112,023,804 16 86.6s 94,326,380 8 59.9s 33,697,248 4 40.7s 10,116,637 -g none 27.1s 2,555,810 Signed-off-by: Waiman Long <Waiman.Long@hp.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Scott J Norton <scott.norton@hp.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1382107129-2010-4-git-send-email-Waiman.Long@hp.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-04tools/perf: Add support for record transaction flagsAndi Kleen
Add support for recording and displaying the transaction flags. They are essentially a new sort key. Also display them in a nice way to the user. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379688044-14173-6-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-04tools/perf: Support sorting by in_tx or abort branch flagsAndi Kleen
Extend the perf branch sorting code to support sorting by in_tx or abort_tx qualifiers. Also print out those qualifiers. This also fixes up some of the existing sort key documentation. We do not support no_tx here, because it's simply not showing the in_tx flag. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379688044-14173-4-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-22perf tools: Support callchain sorting based on addressesAndi Kleen
With programs with very large functions it can be useful to distinguish the callgraph nodes on more than just function names. So for example if you have multiple calls to the same function, it ends up being separate nodes in the chain. This patch adds a new key field to the callgraph options, that allows comparing nodes on functions (as today, default) and addresses. Longer term it would be nice to also handle src lines, but that would need more changes and address is a reasonable proxy for it today. I right now reference the global params, as there was no simple way to register a params pointer. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-12perf report/top: Add option to collapse undesired parts of call graphGreg Price
For example, in an application with an expensive function implemented with deeply nested recursive calls, the default call-graph presentation is dominated by the different callchains within that function. By ignoring these callees, we can collect the callchains leading into the function and compactly identify what to blame for expensive calls. For example, in this report the callers of garbage_collect() are scattered across the tree: $ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z] 22.03% ruby [.] gc_mark --- gc_mark |--59.40%-- mark_keyvalue | st_foreach | gc_mark_children | |--99.75%-- rb_gc_mark | | rb_vm_mark | | gc_mark_children | | gc_marks | | |--99.00%-- garbage_collect If we ignore the callees of garbage_collect(), its callers are coalesced: $ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z] 72.92% ruby [.] garbage_collect --- garbage_collect vm_xmalloc |--47.08%-- ruby_xmalloc | st_insert2 | rb_hash_aset | |--98.45%-- features_index_add | | rb_provide_feature | | rb_require_safe | | vm_call_method Signed-off-by: Greg Price <price@mit.edu> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu Cc: Fengguang Wu <fengguang.wu@intel.com> [ remove spaces at beginning of line, reported by Fengguang Wu ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-05-28perf report: Add --percent-limit optionNamhyung Kim
The --percent-limit option is for not showing small overhead entries in the output. Maybe we want to set a certain default value like 0.1. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01perf tools: Add support for weight v7 (modified)Andi Kleen
perf record has a new option -W that enables weightened sampling. Add sorting support in top/report for the average weight per sample and the total weight sum. This allows to both compare relative cost per event and the total cost over the measurement period. Add the necessary glue to perf report, record and the library. v2: Merge with new hist refactoring. v3: Fix manpage. Remove value check. Rename global_weight to weight and weight to local_weight. v4: Readd sort keys to manpage v5: Move weight to end v6: Move weight to template v7: Rename weight key. Original patch from Andi modified by Stephane Eranian <eranian@google.com> to include ONLY the weight supporting code and apply to pristine 3.8.0-rc4. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1359040242-8269-6-git-send-email-eranian@google.com [ committer note: changed to cope with fc5871ed and the hists_link perf test entry ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-26perf report: Add --no-demangle optionNamhyung Kim
It's sometimes useful to see undemangled raw symbol name for example other tools using the perf output to do manipulation of binaries. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Suggested-by: William Cohen <wcohen@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: William Cohen <wcohen@redhat.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571 Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf report: Add --group optionNamhyung Kim
Add --group option to enable event grouping. When enabled, all the group members information will be shown together with the leader. $ perf report --group ... # group: {ref-cycles,cycles} # ======== # # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... # 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1358845787-1350-18-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24perf report: Update documentation for sort keysNamhyung Kim
Add description of sort keys to the perf-report document and also add missing cpu and srcline keys to the command line help string. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1356599507-14226-11-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-05perf tools: Allow user to indicate path to objdump in command lineMaciek Borzecki
When analyzing perf data from hosts of other architecture than one of the local host it's useful to call objdump that is part of a toolchain for that architecture. Instead of calling regular objdump, call one that user specified in command line. Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1346754750.16299.3.camel@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-06-19perf tools: Add sort by src line/numberArnaldo Carvalho de Melo
Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-19perf report: Add a simple GTK2-based 'perf report' browserPekka Enberg
This patch adds a simple GTK2-based browser to 'perf report' that's based on the TTY-based browser in builtin-report.c. To launch "perf report" using the new GTK interface just type: $ perf report --gtk The interface is somewhat limited in features at the moment: - No callgraph support - No KVM guest profiling support - No color coding for percentages - No sorting from the UI - ..and many, many more! That said, I think this patch a reasonable start to build future features on. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: Colin Walters <walters@verbum.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain [ committer note: Added #pragma to make gtk no strict prototype problem go away as suggested by Colin Walters modulo avoiding push/pop ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-19perf report: Document --symbol-filter optionNamhyung Kim
Add missing description of --symbol-filter in Documentation/perf-report.txt. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1332125628-23088-1-git-send-email-namhyung.kim@lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-09perf report: Auto-detect branch stack sampling modeStephane Eranian
This patch enhances perf report to auto-detect when the perf.data file contains samples with branch stacks. That way it is not necessary to use the -b option. To force branch view mode to off, simply use --no-branch-stack. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331246868-19905-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-09perf report: Add support for taken branch samplingRoberto Agostino Vitillo
This patch adds support for taken branch sampling, i.e, the PERF_SAMPLE_BRANCH_STACK feature to perf report. In other words, to display histograms based on taken branches rather than executed instructions addresses. The new option is called -b and it takes no argument. To generate meaningful output, the perf.data must have been obtained using perf record -b xxx ... where xxx is a branch filter option. The output shows symbols, modules, sorted by 'who branches where' the most often. The percentages reported in the first column refer to the total number of branches captured and not the usual number of samples. Here is a quick example. Here branchy is simple test program which looks as follows: void f2(void) {} void f3(void) {} void f1(unsigned long n) { if (n & 1UL) f2(); else f3(); } int main(void) { unsigned long i; for (i=0; i < N; i++) f1(i); return 0; } Here is the output captured on Nehalem, if we are only interested in user level function calls. $ perf record -b any_call,u -e cycles:u branchy $ perf report -b --sort=symbol 52.34% [.] main [.] f1 24.04% [.] f1 [.] f3 23.60% [.] f1 [.] f2 0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow 0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn 0.01% [k] _IO_vfprintf_internal [k] strchrnul 0.01% [k] __printf [k] _IO_vfprintf_internal 0.01% [k] main [k] __printf About half (52%) of the call branches captured are from main() -> f1(). The second half (24%+23%) is split in two equal shares between f1() -> f2(), f1() ->f3(). The output is as expected given the code. It should be noted, that using -b in perf record does not eliminate information in the perf.data file. Consequently, a typical profile can also be obtained by perf report by simply not using its -b option. It is possible to sort on branch related columns: - dso_from, symbol_from - dso_to, symbol_to - mispredict Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-14-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-23perf report: Accept fifos as input fileRobert Richter
The default input file for perf report is not handled the same way as perf record does it for its output file. This leads to unexpected behavior of perf report, etc. E.g.: # perf record -a -e cpu-cycles sleep 2 | perf report | cat failed to open perf.data: No such file or directory (try 'perf record' first) While perf record writes to a fifo, perf report expects perf.data to be read. This patch changes this to accept fifos as input file. Applies to the following commands: perf annotate perf buildid-list perf evlist perf kmem perf lock perf report perf sched perf script perf timechart Also fixes char const* -> const char* type declaration for filename strings. v2: * Prevent potential null pointer access to input_name in builtin-report.c. Needed due to removal of patch "perf report: Setup browser if stdout is a pipe" Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.com Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-20perf report: Document '--call-graph' for optional print_limit argumentNamhyung Kim
The '--call-graph' command line option can receive undocumented optional print_limit argument. Besides, use strtoul() to parse the option since its type is u32. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1323703017-6060-2-git-send-email-namhyung@gmail.com Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28perf tools: make -C consistent across commands (for cpu list arg)David Ahern
Currently the meaning of -C varies by perf command: for perf-top, perf-stat, perf-record it means cpu list. For perf-report it means comm list. Then perf-annotate, perf-report and perf-script use -c for cpu list. Fix annotate, report and script to use -C for cpu list to be consistent with top, stat and record. This means report needs to use -c for comm list which does introduce a backward compatibility change. v1 -> v2 - update perf-script.txt too Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-07perf tools: Make --no-asm-raw the defaultArnaldo Carvalho de Melo
And add the annotation output knobs to all the tools that have integrated annotation (top, report). Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-gnlob67mke6sji2kf4nstp7m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-07perf tools: Make perf.data more self-descriptive (v8)Stephane Eranian
The goal of this patch is to include more information about the host environment into the perf.data so it is more self-descriptive. Overtime, profiles are captured on various machines and it becomes hard to track what was recorded, on what machine and when. This patch provides a way to solve this by extending the perf.data file with basic information about the host machine. To add those extensions, we leverage the feature bits capabilities of the perf.data format. The change is backward compatible with existing perf.data files. We define the following useful new extensions: - HEADER_HOSTNAME: the hostname - HEADER_OSRELEASE: the kernel release number - HEADER_ARCH: the hw architecture - HEADER_CPUDESC: generic CPU description - HEADER_NRCPUS: number of online/avail cpus - HEADER_CMDLINE: perf command line - HEADER_VERSION: perf version - HEADER_TOPOLOGY: cpu topology - HEADER_EVENT_DESC: full event description (attrs) - HEADER_CPUID: easy-to-parse low level CPU identication The small granularity for the entries is to make it easier to extend without breaking backward compatiblity. Many entries are provided as ASCII strings. Perf report/script have been modified to print the basic information as easy-to-parse ASCII strings. Extended information about CPU and NUMA topology may be requested with the -I option. Thanks to David Ahern for reviewing and testing the many versions of this patch. $ perf report --stdio # ======== # captured on : Mon Sep 26 15:22:14 2011 # hostname : quad # os release : 3.1.0-rc4-tip # perf version : 3.1.0-rc4 # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz # cpuid : GenuineIntel,6,15,11 # total memory : 8105360 kB # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31, # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # ======== # ... $ perf report --stdio -I # ======== # captured on : Mon Sep 26 15:22:14 2011 # hostname : quad # os release : 3.1.0-rc4-tip # perf version : 3.1.0-rc4 # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz # cpuid : GenuineIntel,6,15,11 # total memory : 8105360 kB # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31, # sibling cores : 0-3 # sibling threads : 0 # sibling threads : 1 # sibling threads : 2 # sibling threads : 3 # node0 meminfo : total = 8320608 kB, free = 7571024 kB # node0 cpu list : 0-3 # ======== # ... Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad Signed-off-by: Stephane Eranian <eranian@google.com> [ committer notes: Use --show-info in the tools as was in the docs, rename perf_header_fprintf_info to perf_file_section__fprintf_info, fixup conflict with f69b64f7 "perf: Support setting the disassembler style" ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-07perf report: Add option to show total periodArnaldo Carvalho de Melo
Just like --show-nr-samples, to help in diagnosing problems in the tools. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1lr7ejdjfvy2uwy2wkmatcpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-29perf: Support setting the disassembler styleAndi Kleen
Add -M option to report/annotate to pass directly to objdump. This allows to use -M intel for intel style disassembler syntax, which is useful for people who are very used to the Intel syntax. Link: http://lkml.kernel.org/r/1316122302-24306-2-git-send-email-andi@firstfloor.org [committer note: Add missing Documentation bits, fixup conflicts with 3e6a2a7] Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-07-05perf report/annotate/script: Add option to specify a CPU rangeAnton Blanchard
Add an option to perf report/annotate/script to specify which CPUs to operate on. This enables us to take a single system wide profile and analyse each CPU (or group of CPUs) in isolation. This was useful when profiling a multiprocess workload where the bottleneck was on one CPU but this was hidden in the overall profile. Per process and per thread breakdowns didn't help because multiple processes were running on each CPU and no single process consumed an entire CPU. The patch converts the list of CPUs returned by cpu_map__new into a bitmap for fast lookup. I wanted to use -C to be consistent with perf top/record/stat, but unfortunately perf report already uses -C <comms>. v2: Incorporate suggestions from David Ahern: - Added -c to perf script - Check that SAMPLE_CPU is set when -c is used - Update documentation v3: Create perf_session__cpu_bitmap() Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20110704215750.11647eb9@kryten Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-30perf tools: Add inverted call graph report support.Sam Liao
Add "caller/callee" option to support inverted butterfly report, in the inverted report (with caller option), the call graph start from the callee's ancestor. Users can use such view to catch system's performance bottleneck from a sysprof like view. Using this option with specified sort order like pid gives us high level view of call graph statistics. Also add "-G" alias for inverted call graph. Signed-off-by: Sam Liao <phyomh@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-12-21perf symbols: Add symfs option for off-box analysis using specified treeDavid Ahern
The symfs argument allows analysis of perf.data file using a locally accessible filesystem tree with debug symbols - e.g., tree created during image builds, sshfs mount, loop mounted KVM disk images, USB keys, initrds, etc. Anything with an OS tree can be analyzed from anywhere without the need to populate a local data store with build-ids. Commiter notes: o Fixed up symfs="/" variants handling. o prefixed DSO__ORIG_GUEST_KMODULE case with symfs too, avoiding use of files outside the symfs directory. LKML-Reference: <1291926427-28846-1-git-send-email-daahern@cisco.com> Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf report: Allow user to specify path to kallsyms fileDavid Ahern
This is useful for analyzing a perf data file on a different system than the one data was collected on and still include symbols from loaded kernel modules in the output. Commiter note: Updated the man page accordingly. LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com> Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-01perf report: Document missing optionsShawn Bohrer
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-10-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-08-21perf tools: Add --tui and --stdio to choose the UIArnaldo Carvalho de Melo
Relying just on ~/.perfconfig or rebuilding the tool disabling support for the TUI is too cumbersome, so allow specifying which UI to use and make the command line switch override whatever is in ~/.perfconfig. Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2009-12-16perf diff: Use perf_session__fprintf_hists just like 'perf record'Arnaldo Carvalho de Melo
That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-09perf tools: Fix syntax in documentationZeev Tarantov
Fix trivial syntax in perf-events user-space tools documentation. Signed-off-by: Zeev Tarantov <zeev.tarantov@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <12d7e64c0911081811i7e5b466cu6706ff6ab3e70db4@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31perf tools: Add missing parameters documentationFrederic Weisbecker
Add missing documentation for the following parameters: - perf record -R - perf report -g Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251682323-10395-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf report: Fix and improve the displaying of per-thread event countersBrice Goglin
Improve and fix the handling of per-thread counter stats recorded via perf record -s. Previously we only displayed it in debug printouts (-D) and even that output was hard to disambiguate. I moved everything to utils/values.[ch] so that we may reuse it in perf stat. We get something like this now: # PID TID cache-misses cache-references 4658 4659 495581 3238779 4658 4662 498246 3236823 4658 4663 499531 3243162 Then it'll be easy to add --pretty=raw to display a single line per thread/event. By the way, -S was also used for --symbol... So I used -T/--thread here. perf report: Add -T/--threads to display per-thread counter values We get something like this now: # PID TID cache-misses cache-references 4658 4659 495581 3238779 4658 4662 498246 3236823 4658 4663 499531 3243162 Per-thread arrays of counter values are managed in utils/values.[ch] Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11perf report: Introduce -n/--show-nr-samplesArnaldo Carvalho de Melo
[acme@doppio pahole]$ perf report -ns comm,dso,symbol -d /lib64/libc-2.10.1.so -C pahole | head -17 21.94% 32101 [.] _int_malloc 20.10% 29402 [.] __GI_strcmp 16.77% 24533 [.] __tsearch 12.61% 18450 [.] malloc_consolidate 6.42% 9394 [.] _int_free 6.28% 9191 [.] __tfind 4.56% 6678 [.] __GI___libc_free 4.46% 6520 [.] _IO_vfprintf_internal 2.59% 3786 [.] __malloc 1.17% 1716 [.] __GI_memcpy [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1247325517-12272-5-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11perf report: Adjust column width to the values sampledArnaldo Carvalho de Melo
Auto-adjust column width of perf report output to the longest occuring string length. Example: [acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13 12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr 8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc 8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len 8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch 5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type [acme@doppio pahole]$ [acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10 21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc 20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch [acme@doppio pahole]$ Also add these extra options to control the new behaviour: -w, --field-width Force each column width to the provided list, for large terminal readability. -t, --field-separator: Use a special separator character and don't pad with spaces, replacing all occurances of this separator in symbol names (and other output) with a '.' character, that thus it's the only non valid separator. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090711014728.GH3452@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add --symbols parameterArnaldo Carvalho de Melo
So that we can filter by symbol name. The 'pfunct' utility in the 'dwarves' package can be used to create a file with the functions one wants. Example: [acme@doppio pahole]$ pfunct /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | grep dwarf > /tmp/dwarf.symbols [acme@doppio pahole]$ wc -l /tmp/dwarf.symbols 93 /tmp/dwarf.symbols [acme@doppio pahole]$ head -3 /tmp/dwarf.symbols dwfl_addrdwarf dwfl_module_getdwarf dwfl_getdwarf [acme@doppio pahole]$ perf report --sort comm,dso,symbol --comms pahole --dsos /usr/lib64/libdw-0.141.so --symbols file:///tmp/dwarf.symbols 33.99% pahole /usr/lib64/libdw-0.141.so [.] dwarf_tag 29.07% pahole /usr/lib64/libdw-0.141.so [.] dwarf_decl_file 27.71% pahole /usr/lib64/libdw-0.141.so [.] dwarf_getsrclines 4.54% pahole /usr/lib64/libdw-0.141.so 0x00000000007400 3.93% pahole /usr/lib64/libdw-0.141.so [.] dwarf_decl_line 0.46% pahole /usr/lib64/libdw-0.141.so [.] dwarf_getlocation 0.18% pahole /usr/lib64/libdw-0.141.so [.] __libdwarf_next_prime 0.13% pahole /usr/lib64/libdw-0.141.so [.] dwarf_diecu [acme@doppio pahole]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246399282-20934-4-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add --comms parameterArnaldo Carvalho de Melo
So that we can filter by comm. Symbols in other comms won't be accounted for. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01perf report: Add --dsos parameterArnaldo Carvalho de Melo
So that we can filter by dso. Symbols in other dsos won't be accounted for. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23perf report: Fix help text typoIngo Molnar
Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 17:22:41 +0000