| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
|
|
Merge yet more updates from Andrew Morton:
"This is everything else from -mm for this merge window.
90 patches.
Subsystems affected by this patch series: mm (cleanups and slub),
alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat,
checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov,
panic, delayacct, gdb, resource, selftests, async, initramfs, ipc,
drivers/char, and spelling"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits)
mm: fix typos in comments
mm: fix typos in comments
treewide: remove editor modelines and cruft
ipc/sem.c: spelling fix
fs: fat: fix spelling typo of values
kernel/sys.c: fix typo
kernel/up.c: fix typo
kernel/user_namespace.c: fix typos
kernel/umh.c: fix some spelling mistakes
include/linux/pgtable.h: few spelling fixes
mm/slab.c: fix spelling mistake "disired" -> "desired"
scripts/spelling.txt: add "overflw"
scripts/spelling.txt: Add "diabled" typo
scripts/spelling.txt: add "overlfow"
arm: print alloc free paths for address in registers
mm/vmalloc: remove vwrite()
mm: remove xlate_dev_kmem_ptr()
drivers/char: remove /dev/kmem for good
mm: fix some typos and code style problems
ipc/sem.c: mundane typo fixes
...
|
|
Add fast paths to find_*_bit() functions as per kernel implementation.
Link: https://lkml.kernel.org/r/20210401003153.97325-12-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jianpeng Ma <jianpeng.ma@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sync the implementation with recent kernel changes.
Link: https://lkml.kernel.org/r/20210401003153.97325-9-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jianpeng Ma <jianpeng.ma@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some functions in tools/include/linux/bitmap.h declare nbits as int. In
the kernel nbits is declared as unsigned int.
Link: https://lkml.kernel.org/r/20210401003153.97325-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jianpeng Ma <jianpeng.ma@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
One of our benchmarks running in (Google-internal) CI pushes data
through the ringbuf faster htan than userspace is able to consume
it. In this case it seems we're actually able to get >INT_MAX entries
in a single ring_buffer__consume() call. ASAN detected that cnt
overflows in this case.
Fix by using 64-bit counter internally and then capping the result to
INT_MAX before converting to the int return type. Do the same for
the ring_buffer__poll().
Fixes: bf99c936f947 (libbpf: Add BPF ring buffer support)
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210429130510.1621665-1-jackmanb@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"perf stat:
- Add support for hybrid PMUs to support systems such as Intel
Alderlake and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel
hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP)
in commit bb42b3d39781 ("perf/x86/intel/uncore: Expose an Uncore
unit to IIO PMON mapping")
It is intended to provide four I/O performance metrics in MB per
each PCIe root port:
- Inbound Read: I/O devices below root port read from the host memory
- Inbound Write: I/O devices below root port write to the host memory
- Outbound Read: CPU reads from I/O devices below root port
- Outbound Write: CPU writes to I/O devices below root port
- Align CSV output for summary.
- Clarify --null use cases: Assess raw overhead of 'perf stat' or
measure just wall clock time.
- Improve readability of shadow stats.
perf record:
- Change the COMM when starting tha workload so that --exclude-perf
doesn't seem to be not honoured.
- Improve 'Workload failed' message printing events + what was
exec'ed.
- Fix cross-arch support for TIME_CONV.
perf report:
- Add option to disable raw event ordering.
- Dump the contents of PERF_RECORD_TIME_CONV in 'perf report -D'.
- Improvements to --stat output, that shows information about
PERF_RECORD_ events.
- Preserve identifier id in OCaml demangler.
perf annotate:
- Show full source location with 'l' hotkey in the 'perf annotate'
TUI.
- Add line number like in TUI and source location at EOL to the 'perf
annotate' --stdio mode.
- Add --demangle and --demangle-kernel to 'perf annotate'.
- Allow configuring annotate.demangle{,_kernel} in 'perf config'.
- Fix sample events lost in stdio mode.
perf data:
- Allow converting a perf.data file to JSON.
libperf:
- Add support for user space counter access.
- Update topdown documentation to permit rdpmc calls.
perf test:
- Add 'perf test' for 'perf stat' CSV output.
- Add 'perf test' entries to test the hybrid PMU support.
- Cleanup 'perf test daemon' if its 'perf test' is interrupted.
- Handle metric reuse in pmu-events parsing 'perf test' entry.
- Add test for PE executable support.
- Add timeout for wait for daemon start in its 'perf test' entries.
Build:
- Enable libtraceevent dynamic linking.
- Improve feature detection output.
- Fix caching of feature checks caching.
- First round of updates for tools copies of kernel headers.
- Enable warnings when compiling BPF programs.
Vendor specific events:
- Intel:
- Add missing skylake & icelake model numbers.
- arm64:
- Add Hisi hip08 L1, L2 and L3 metrics.
- Add Fujitsu A64FX PMU events.
- PowerPC:
- Initial JSON/events list for power10 platform.
- Remove unsupported power9 metrics.
- AMD:
- Add Zen3 events.
- Fix broken L2 Cache Hits from L2 HWPF metric.
- Use lowercases for all the eventcodes and umasks.
Hardware tracing:
- arm64:
- Update CoreSight ETM metadata format.
- Fix bitmap for CS-ETM option.
- Support PID tracing in config.
- Detect pid in VMID for kernel running at EL2.
Arch specific updates:
- MIPS:
- Support MIPS unwinding and dwarf-regs.
- Generate mips syscalls_n64.c syscall table.
- PowerPC:
- Add support for PERF_SAMPLE_WEIGH_STRUCT on PowerPC.
- Support pipeline stage cycles for powerpc.
libbeauty:
- Fix fsconfig generator"
* tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (132 commits)
perf build: Defer printing detected features to the end of all feature checks
tools build: Allow deferring printing the results of feature detection
perf build: Regenerate the FEATURE_DUMP file after extra feature checks
perf session: Dump PERF_RECORD_TIME_CONV event
perf session: Add swap operation for event TIME_CONV
perf jit: Let convert_timestamp() to be backwards-compatible
perf tools: Change fields type in perf_record_time_conv
perf tools: Enable libtraceevent dynamic linking
perf Documentation: Document intel-hybrid support
perf tests: Skip 'perf stat metrics (shadow stat) test' for hybrid
perf tests: Support 'Convert perf time to TSC' test for hybrid
perf tests: Support 'Session topology' test for hybrid
perf tests: Support 'Parse and process metrics' test for hybrid
perf tests: Support 'Track with sched_switch' test for hybrid
perf tests: Skip 'Setup struct perf_event_attr' test for hybrid
perf tests: Add hybrid cases for 'Roundtrip evsel->name' test
perf tests: Add hybrid cases for 'Parse event definition strings' test
perf record: Uniquify hybrid event name
perf stat: Warn group events from different hybrid PMU
perf stat: Filter out unmatched aggregation for hybrid event
...
|
|
Commit d110162cafc80dad ("perf tsc: Support cap_user_time_short for
event TIME_CONV") supports the extended parameters for event TIME_CONV,
but it broke the backwards compatibility, so any perf data file with old
event format fails to convert timestamp.
This patch introduces a helper event_contains() to check if an event
contains a specific member or not. For the backwards-compatibility, if
the event size confirms the extended parameters are supported in the
event TIME_CONV, then copies these parameters.
Committer notes:
To make this compiler backwards compatible add this patch:
- struct perf_tsc_conversion tc = { 0 };
+ struct perf_tsc_conversion tc = { .time_shift = 0, };
Fixes: d110162cafc8 ("perf tsc: Support cap_user_time_short for event TIME_CONV")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve MacLean <Steve.MacLean@Microsoft.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20210428120915.7123-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
C standard claims "An object declared as type _Bool is large enough to
store the values 0 and 1", bool type size can be 1 byte or larger than
1 byte. Thus it's uncertian for bool type size with different
compilers.
This patch changes the bool type in structure perf_record_time_conv to
__u8 type, and pads extra bytes for 8-byte alignment; this can give
reliable structure size.
Fixes: d110162cafc8 ("perf tsc: Support cap_user_time_short for event TIME_CONV")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve MacLean <Steve.MacLean@Microsoft.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20210428120915.7123-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By following the same protocol, other tools can share hardware PMCs with
perf. Move perf_event_attr_map_entry and BPF_PERF_DEFAULT_ATTR_MAP_PATH to
bpf_perf.h for other tools to use.
Signed-off-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: kernel-team@fb.com
Link: https://lore.kernel.org/r/20210425214333.1090950-2-song@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable
bitfields. Missing breaks in a switch caused 8-byte reads always. This can
confuse libbpf because it does strict checks that memory load size corresponds
to the original size of the field, which in this case quite often would be
wrong.
After fixing that, we run into another problem, which quite subtle, so worth
documenting here. The issue is in Clang optimization and CO-RE relocation
interactions. Without that asm volatile construct (also known as
barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and
will apply BYTE_OFFSET 4 times for each switch case arm. This will result in
the same error from libbpf about mismatch of memory load size and original
field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *),
*(u32 *), and *(u64 *) memory loads, three of which will fail. Using
barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to
calculate p, after which value of p is used without relocation in each of
switch case arms, doing appropiately-sized memory load.
Here's the list of relevant relocations and pieces of generated BPF code
before and after this patch for test_core_reloc_bitfields_direct selftests.
BEFORE
=====
#45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
#46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
160: b7 02 00 00 04 00 00 00 r2 = 4
; BYTE_SIZE relocation here ^^^
161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63>
162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65>
163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66>
164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69>
0000000000000528 <LBB0_66>:
165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69>
0000000000000548 <LBB0_63>:
169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67>
170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68>
171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69>
0000000000000560 <LBB0_68>:
172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69>
0000000000000580 <LBB0_65>:
176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69>
00000000000005a0 <LBB0_67>:
180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8)
; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^
00000000000005b8 <LBB0_69>:
183: 67 01 00 00 20 00 00 00 r1 <<= 32
184: b7 02 00 00 00 00 00 00 r2 = 0
185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
186: c7 01 00 00 20 00 00 00 r1 s>>= 32
187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72>
00000000000005e0 <LBB0_71>:
188: 77 01 00 00 20 00 00 00 r1 >>= 32
AFTER
=====
#30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
132: b7 01 00 00 08 00 00 00 r1 = 8
; BYTE_OFFSET relo here ^^^
; no size check for non-memory dereferencing instructions
133: 0f 12 00 00 00 00 00 00 r2 += r1
134: b7 03 00 00 04 00 00 00 r3 = 4
; BYTE_SIZE relocation here ^^^
135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63>
136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65>
137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66>
138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69>
0000000000000458 <LBB0_66>:
139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69>
0000000000000468 <LBB0_63>:
141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67>
142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68>
143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69>
0000000000000480 <LBB0_68>:
144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69>
0000000000000490 <LBB0_65>:
146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69>
00000000000004a0 <LBB0_67>:
148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
00000000000004a8 <LBB0_69>:
149: 67 01 00 00 20 00 00 00 r1 <<= 32
150: b7 02 00 00 00 00 00 00 r2 = 0
151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
152: c7 01 00 00 20 00 00 00 r1 s>>= 32
153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72>
00000000000004d0 <LBB0_71>:
154: 77 01 00 00 20 00 00 00 r1 >>= 323
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org
|
|
Add BTF_KIND_FLOAT support when doing CO-RE field type compatibility check.
Without this, relocations against float/double fields will fail.
Also adjust one error message to emit instruction index instead of less
convenient instruction byte offset.
Fixes: 22541a9eeb0d ("libbpf: Add BTF_KIND_FLOAT support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-3-andrii@kernel.org
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add extra logic to handle map externs (only BTF-defined maps are supported for
linking). Re-use the map parsing logic used during bpf_object__open(). Map
externs are currently restricted to always match complete map definition. So
all the specified attributes will be compared (down to pining, map_flags,
numa_node, etc). In the future this restriction might be relaxed with no
backwards compatibility issues. If any attribute is mismatched between extern
and actual map definition, linker will report an error, pointing out which one
mismatches.
The original intent was to allow for extern to specify attributes that matters
(to user) to enforce. E.g., if you specify just key information and omit
value, then any value fits. Similarly, it should have been possible to enforce
map_flags, pinning, and any other possible map attribute. Unfortunately, that
means that multiple externs can be only partially overlapping with each other,
which means linker would need to combine their type definitions to end up with
the most restrictive and fullest map definition. This requires an extra amount
of BTF manipulation which at this time was deemed unnecessary and would
require further extending generic BTF writer APIs. So that is left for future
follow ups, if there will be demand for that. But the idea seems intresting
and useful, so I want to document it here.
Weak definitions are also supported, but are pretty strict as well, just
like externs: all weak map definitions have to match exactly. In the follow up
patches this most probably will be relaxed, with __weak map definitions being
able to differ between each other (with non-weak definition always winning, of
course).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-13-andrii@kernel.org
|
|
Add BPF static linker logic to resolve extern variables and functions across
multiple linked together BPF object files.
For that, linker maintains a separate list of struct glob_sym structures,
which keeps track of few pieces of metadata (is it extern or resolved global,
is it a weak symbol, which ELF section it belongs to, etc) and ties together
BTF type info and ELF symbol information and keeps them in sync.
With adding support for extern variables/funcs, it's now possible for some
sections to contain both extern and non-extern definitions. This means that
some sections may start out as ephemeral (if only externs are present and thus
there is not corresponding ELF section), but will be "upgraded" to actual ELF
section as symbols are resolved or new non-extern definitions are appended.
Additional care is taken to not duplicate extern entries in sections like
.kconfig and .ksyms.
Given libbpf requires BTF type to always be present for .kconfig/.ksym
externs, linker extends this requirement to all the externs, even those that
are supposed to be resolved during static linking and which won't be visible
to libbpf. With BTF information always present, static linker will check not
just ELF symbol matches, but entire BTF type signature match as well. That
logic is stricter that BPF CO-RE checks. It probably should be re-used by
.ksym resolution logic in libbpf as well, but that's left for follow up
patches.
To make it unnecessary to rewrite ELF symbols and minimize BTF type
rewriting/removal, ELF symbols that correspond to externs initially will be
updated in place once they are resolved. Similarly for BTF type info, VAR/FUNC
and var_secinfo's (sec_vars in struct bpf_linker) are staying stable, but
types they point to might get replaced when extern is resolved. This might
leave some left-over types (even though we try to minimize this for common
cases of having extern funcs with not argument names vs concrete function with
names properly specified). That can be addresses later with a generic BTF
garbage collection. That's left for a follow up as well.
Given BTF type appending phase is separate from ELF symbol
appending/resolution, special struct glob_sym->underlying_btf_id variable is
used to communicate resolution and rewrite decisions. 0 means
underlying_btf_id needs to be appended (it's not yet in final linker->btf), <0
values are used for temporary storage of source BTF type ID (not yet
rewritten), so -glob_sym->underlying_btf_id is BTF type id in obj-btf. But by
the end of linker_append_btf() phase, that underlying_btf_id will be remapped
and will always be > 0. This is the uglies part of the whole process, but
keeps the other parts much simpler due to stability of sec_var and VAR/FUNC
types, as well as ELF symbol, so please keep that in mind while reviewing.
BTF-defined maps require some extra custom logic and is addressed separate in
the next patch, so that to keep this one smaller and easier to review.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-12-andrii@kernel.org
|
|
It should never fail, but if it does, it's better to know about this rather
than end up with nonsensical type IDs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-11-andrii@kernel.org
|
|
Add logic to validate extern symbols, plus some other minor extra checks, like
ELF symbol #0 validation, general symbol visibility and binding validations.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-10-andrii@kernel.org
|
|
Make skip_mods_and_typedefs(), btf_kind_str(), and btf_func_linkage() helpers
available outside of libbpf.c, to be used by static linker code.
Also do few cleanups (error code fixes, comment clean up, etc) that don't
deserve their own commit.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-9-andrii@kernel.org
|
|
Factor out logic for sanity checking SHT_SYMTAB and SHT_REL sections into
separate sections. They are already quite extensive and are suffering from too
deep indentation. Subsequent changes will extend SYMTAB sanity checking
further, so it's better to factor each into a separate function.
No functional changes are intended.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-8-andrii@kernel.org
|
|
Refactor BTF-defined maps parsing logic to allow it to be nicely reused by BPF
static linker. Further, at least for BPF static linker, it's important to know
which attributes of a BPF map were defined explicitly, so provide a bit set
for each known portion of BTF map definition. This allows BPF static linker to
do a simple check when dealing with extern map declarations.
The same capabilities allow to distinguish attributes explicitly set to zero
(e.g., __uint(max_entries, 0)) vs the case of not specifying it at all (no
max_entries attribute at all). Libbpf is currently not utilizing that, but it
could be useful for backwards compatibility reasons later.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-7-andrii@kernel.org
|
|
Currently libbpf is very strict about parsing BPF program instruction
sections. No gaps are allowed between sequential BPF programs within a given
ELF section. Libbpf enforced that by keeping track of the next section offset
that should start a new BPF (sub)program and cross-checks that by searching
for a corresponding STT_FUNC ELF symbol.
But this is too restrictive once we allow to have weak BPF programs and link
together two or more BPF object files. In such case, some weak BPF programs
might be "overridden" by either non-weak BPF program with the same name and
signature, or even by another weak BPF program that just happened to be linked
first. That, in turn, leaves BPF instructions of the "lost" BPF (sub)program
intact, but there is no corresponding ELF symbol, because no one is going to
be referencing it.
Libbpf already correctly handles such cases in the sense that it won't append
such dead code to actual BPF programs loaded into kernel. So the only change
that needs to be done is to relax the logic of parsing BPF instruction
sections. Instead of assuming next BPF (sub)program section offset, iterate
available STT_FUNC ELF symbols to discover all available BPF subprograms and
programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-6-andrii@kernel.org
|
|
Define __hidden helper macro in bpf_helpers.h, which is a short-hand for
__attribute__((visibility("hidden"))). Add libbpf support to mark BPF
subprograms marked with __hidden as static in BTF information to enforce BPF
verifier's static function validation algorithm, which takes more information
(caller's context) into account during a subprogram validation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-5-andrii@kernel.org
|
|
When used on externs SEC() macro will trigger compilation warning about
inapplicable `__attribute__((used))`. That's expected for extern declarations,
so suppress it with the corresponding _Pragma.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-4-andrii@kernel.org
|
|
xyarray__entry() is missing any bounds checking yet often the x and y
parameters come from external callers. Add bounds checks and an
unchecked __xyarray__entry().
Committer notes:
Make the 'x' and 'y' arguments to the new xyarray__entry() that does
bounds check to be of type 'size_t', so that we cover also the case
where 'x' and 'y' could be negative, which is needed anyway as having
them as 'int' breaks the build with:
/home/acme/git/perf/tools/lib/perf/include/internal/xyarray.h: In function ‘xyarray__entry’:
/home/acme/git/perf/tools/lib/perf/include/internal/xyarray.h:28:8: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
28 | if (x >= xy->max_x || y >= xy->max_y)
| ^~
/home/acme/git/perf/tools/lib/perf/include/internal/xyarray.h:28:26: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
28 | if (x >= xy->max_x || y >= xy->max_y)
| ^~
cc1: all warnings being treated as errors
Signed-off-by: Rob Herring <robh@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210414195758.4078803-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
x86 and arm64 can both support direct access of event counters in
userspace. The access sequence is less than trivial and currently exists
in perf test code (tools/perf/arch/x86/tests/rdpmc.c) with copies in
projects such as PAPI and libpfm4.
In order to support userspace access, an event must be mmapped first
with perf_evsel__mmap(). Then subsequent calls to perf_evsel__read()
will use the fast path (assuming the arch supports it).
Committer notes:
Added a '__maybe_unused' attribute to the read_perf_counter() argument
to fix the build on arches other than x86_64 and arm.
Committer testing:
Building and running the libperf tests in verbose mode (V=1) now shows
those "loop = N, count = N" extra lines, testing user space counter
access.
# make V=1 -C tools/lib/perf tests
make: Entering directory '/home/acme/git/perf/tools/lib/perf'
make -f /home/acme/git/perf/tools/build/Makefile.build dir=. obj=libperf
make -C /home/acme/git/perf/tools/lib/api/ O= libapi.a
make -f /home/acme/git/perf/tools/build/Makefile.build dir=./fd obj=libapi
make -f /home/acme/git/perf/tools/build/Makefile.build dir=./fs obj=libapi
make -C tests
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-cpumap-a test-cpumap.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-threadmap-a test-threadmap.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-evlist-a test-evlist.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-evsel-a test-evsel.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-cpumap-so test-cpumap.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-threadmap-so test-threadmap.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-evlist-so test-evlist.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-evsel-so test-evsel.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
make -C tests run
running static:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...OK
- running test-evsel.c...
loop = 65536, count = 333926
loop = 131072, count = 655781
loop = 262144, count = 1311141
loop = 524288, count = 2630126
loop = 1048576, count = 5256955
loop = 65536, count = 524594
loop = 131072, count = 1058916
loop = 262144, count = 2097458
loop = 524288, count = 4205429
loop = 1048576, count = 8406606
OK
running dynamic:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...OK
- running test-evsel.c...
loop = 65536, count = 328102
loop = 131072, count = 655782
loop = 262144, count = 1317494
loop = 524288, count = 2627851
loop = 1048576, count = 5255187
loop = 65536, count = 524601
loop = 131072, count = 1048923
loop = 262144, count = 2107917
loop = 524288, count = 4194606
loop = 1048576, count = 8409322
OK
make: Leaving directory '/home/acme/git/perf/tools/lib/perf'
#
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-4-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Similarly to BPF_SEQ_PRINTF, this macro turns variadic arguments into an
array of u64, making it more natural to call the bpf_snprintf helper.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-6-revest@chromium.org
|
|
When initializing the __param array with a one liner, if all args are
const, the initial array value will be placed in the rodata section but
because libbpf does not support relocation in the rodata section, any
pointer in this array will stay NULL.
Fixes: c09add2fbc5a ("tools/libbpf: Add bpf_iter support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-5-revest@chromium.org
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
relo->processed is set, but not used. Remove it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210415141817.53136-1-alexei.starovoitov@gmail.com
|
|
Add __T_VERBOSE() so tests can add verbose output. The verbose output is
enabled with the '-v' command line option. Running 'make tests V=1' will
enable the '-v' option when running the tests.
It'll be used in the next patch, for a user space counter access test.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-3-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to support usersapce access, an event must be mmapped. While
there's already mmap support for evlist, the usecase is a bit different
than the self monitoring with userspace access. So let's add new
perf_evsel__mmap()/perf_evsel_munmap() functions to mmap/munmap an
evsel. This allows implementing userspace access as a fastpath for
perf_evsel__read().
The mmapped address is returned by perf_evsel__mmap_base() which
primarily for users/tests to check if userspace access is enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-2-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The API gives access to inner map for map in map types (array or
hash of map). It will be used to dynamically set max_entries in it.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-7-yauheni.kaliuta@redhat.com
|
|
Wait until after the UMEM is checked for null to dereference it.
Fixes: 43f1bc1efff1 ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com
|
|
Add missing ')' for KERNEL_VERSION macro.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210405040119.802188-1-hengqi.chen@gmail.com
|
|
Remove redundant semi-colon in finalize_btf_ext().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210402012634.1965453-1-yangyingliang@huawei.com
|
|
Prior to this commit xsk_socket__create(_shared) always attempted to create
the rx and tx rings for the socket. However this causes an issue when the
socket being setup is that which shares the fd with the UMEM. If a
previous call to this function failed with this socket after the rings were
set up, a subsequent call would always fail because the rings are not torn
down after the first call and when we try to set them up again we encounter
an error because they already exist. Solve this by remembering whether the
rings were set up by introducing new bools to struct xsk_umem which
represent the ring setup status and using them to determine whether or
not to set up the rings.
Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-4-ciara.loftus@intel.com
|
|
If the call to xsk_socket__create fails, the user may want to retry the
socket creation using the same umem. Ensure that the umem is in the
same state on exit if the call fails by:
1. ensuring the umem _save pointers are unmodified.
2. not unmapping the set of umem rings that were set up with the umem
during xsk_umem__create, since those maps existed before the call to
xsk_socket__create and should remain in tact even in the event of
failure.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-3-ciara.loftus@intel.com
|
|
Calls to xsk_socket__create dereference the umem to access the
fill_save and comp_save pointers. Make sure the umem is non-NULL
before doing this.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210331061218.1647-2-ciara.loftus@intel.com
|
|
Currently, if there are multiple xdpsock instances running on a single
interface and in case one of the instances is terminated, the rest of
them are left in an inoperable state due to the fact of unloaded XDP
prog from interface.
Consider the scenario below:
// load xdp prog and xskmap and add entry to xskmap at idx 10
$ sudo ./xdpsock -i ens801f0 -t -q 10
// add entry to xskmap at idx 11
$ sudo ./xdpsock -i ens801f0 -t -q 11
terminate one of the processes and another one is unable to work due to
the fact that the XDP prog was unloaded from interface.
To address that, step away from setting bpf prog in favour of bpf_link.
This means that refcounting of BPF resources will be done automatically
by bpf_link itself.
Provide backward compatibility by checking if underlying system is
bpf_link capable. Do this by looking up/creating bpf_link on loopback
device. If it failed in any way, stick with netlink-based XDP prog.
therwise, use bpf_link-based logic.
When setting up BPF resources during xsk socket creation, check whether
bpf_link for a given ifindex already exists via set of calls to
bpf_link_get_next_id -> bpf_link_get_fd_by_id -> bpf_obj_get_info_by_fd
and comparing the ifindexes from bpf_link and xsk socket.
For case where resources exist but they are not AF_XDP related, bail out
and ask user to remove existing prog and then retry.
Lastly, do a bit of refactoring within __xsk_setup_xdp_prog and pull out
existing code branches based on prog_id value onto separate functions
that are responsible for resource initialization if prog_id was 0 and
for lookup existing resources for non-zero prog_id as that implies that
XDP program is present on the underlying net device. This in turn makes
it easier to follow, especially the teardown part of both branches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-7-maciej.fijalkowski@intel.com
|
|
Free temporary allocated memory used to construct finalized .BTF.ext data.
Found by Coverity static analysis on libbpf's Github repo.
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210327042502.969745-1-andrii@kernel.org
|
|
This patch is to make libbpf able to handle the following extern
kernel function declaration and do the needed relocations before
loading the bpf program to the kernel.
extern int foo(struct sock *) __attribute__((section(".ksyms")))
In the collect extern phase, needed changes is made to
bpf_object__collect_externs() and find_extern_btf_id() to collect
extern function in ".ksyms" section. The func in the BTF datasec also
needs to be replaced by an int var. The idea is similar to the existing
handling in extern var. In case the BTF may not have a var, a dummy ksym
var is added at the beginning of bpf_object__collect_externs()
if there is func under ksyms datasec. It will also change the
func linkage from extern to global which the kernel can support.
It also assigns a param name if it does not have one.
In the collect relo phase, it will record the kernel function
call as RELO_EXTERN_FUNC.
bpf_object__resolve_ksym_func_btf_id() is added to find the func
btf_id of the running kernel.
During actual relocation, it will patch the BPF_CALL instruction with
src_reg = BPF_PSEUDO_FUNC_CALL and insn->imm set to the running
kernel func's btf_id.
The required LLVM patch: https://reviews.llvm.org/D93563
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015234.1548923-1-kafai@fb.com
|
|
This patch records the extern sym relocs first before recording
subprog relocs. The later patch will have relocs for extern
kernel function call which is also using BPF_JMP | BPF_CALL.
It will be easier to handle the extern symbols first in
the later patch.
is_call_insn() helper is added. The existing is_ldimm64() helper
is renamed to is_ldimm64_insn() for consistency.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015227.1548623-1-kafai@fb.com
|
|
This patch renames RELO_EXTERN to RELO_EXTERN_VAR.
It is to avoid the confusion with a later patch adding
RELO_EXTERN_FUNC.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015221.1547722-1-kafai@fb.com
|
|
This patch refactors code, that finds kernel btf_id by kind
and symbol name, to a new function find_ksym_btf_id().
It also adds a new helper __btf_kind_str() to return
a string by the numeric kind value.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015214.1547069-1-kafai@fb.com
|
|
This patch refactors most of the logic from
bpf_object__resolve_ksyms_btf_id() into a new function
bpf_object__resolve_ksym_var_btf_id().
It is to get ready for a later patch adding
bpf_object__resolve_ksym_func_btf_id() which resolves
a kernel function to the running kernel btf_id.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015207.1546749-1-kafai@fb.com
|
|
Ensure that BPF static linker preserves all DATASEC BTF types, even if some of
them might not have any variable information at all. This may happen if the
compiler promotes local initialized variable contents into .rodata section and
there are no global or static functions in the program.
For example,
$ cat t.c
struct t { char a; char b; char c; };
void bar(struct t*);
void find() {
struct t tmp = {1, 2, 3};
bar(&tmp);
}
$ clang -target bpf -O2 -g -S t.c
.long 104 # BTF_KIND_DATASEC(id = 8)
.long 251658240 # 0xf000000
.long 0
.ascii ".rodata" # string offset=104
$ clang -target bpf -O2 -g -c t.c
$ readelf -S t.o | grep data
[ 4] .rodata PROGBITS 0000000000000000 00000090
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210326043036.3081011-1-andrii@kernel.org
|
|
The current code bails out with negative and positive returns.
If the callback returns a positive return code, 'ring_buffer__consume()'
and 'ring_buffer__poll()' will return a spurious number of records
consumed, but mostly important will continue the processing loop.
This patch makes positive returns from the callback a no-op.
Fixes: bf99c936f947 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325150115.138750-1-pctammela@mojatatu.com
|
|
Unfortunately some distros don't have their kernel version defined
accurately in <linux/version.h> due to different long term support
reasons.
It is important to have a way to override the bpf kern_version
attribute during runtime: some old kernels might still check for
kern_version attribute during bpf_prog_load().
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@ubuntu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210323040952.2118241-1-rafaeldtinoco@ubuntu.com
|
