summaryrefslogtreecommitdiff
path: root/tools/include
AgeCommit message (Collapse)Author
2019-07-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - support for chained PMU counters in guests - improved SError handling - handle Neoverse N1 erratum #1349291 - allow side-channel mitigation status to be migrated - standardise most AArch64 system register accesses to msr_s/mrs_s - fix host MPIDR corruption on 32bit - selftests ckleanups x86: - PMU event {white,black}listing - ability for the guest to disable host-side interrupt polling - fixes for enlightened VMCS (Hyper-V pv nested virtualization), - new hypercall to yield to IPI target - support for passing cstate MSRs through to the guest - lots of cleanups and optimizations Generic: - Some txt->rST conversions for the documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits) Documentation: virtual: Add toctree hooks Documentation: kvm: Convert cpuid.txt to .rst Documentation: virtual: Convert paravirt_ops.txt to .rst KVM: x86: Unconditionally enable irqs in guest context KVM: x86: PMU Event Filter kvm: x86: Fix -Wmissing-prototypes warnings KVM: Properly check if "page" is valid in kvm_vcpu_unmap KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane kvm: LAPIC: write down valid APIC registers KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register KVM: arm/arm64: Add save/restore support for firmware workaround state arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests KVM: arm/arm64: Support chained PMU counters KVM: arm/arm64: Remove pmc->bitmask KVM: arm/arm64: Re-create event when setting counter value KVM: arm/arm64: Extract duplicated code to own function KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions KVM: LAPIC: ARBPRI is a reserved register for x2APIC ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-09Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle on the kernel side were: - CPU PMU and uncore driver updates to Intel Snow Ridge, IceLake, KabyLake, AmberLake and WhiskeyLake CPUs. - Rework the MSR probing infrastructure to make it more robust, make it work better on virtualized systems and to better expose it on sysfs. - Rework PMU attributes group support based on the feedback from Greg. The core sysfs patch that adds sysfs_update_groups() was acked by Greg. There's a lot of perf tooling changes as well, all around the place: - vendor updates to Intel, cs-etm (ARM), ARM64, s390, - various enhancements to Intel PT tooling support: - Improve CBR (Core to Bus Ratio) packets support. - Export power and ptwrite events to sqlite and postgresql. - Add support for decoding PEBS via PT packets. - Add support for samples to contain IPC ratio, collecting cycles information from CYC packets, showing the IPC info periodically - Allow using time ranges - lots of updates to perf pmu, perf stat, perf trace, eBPF support, perf record, perf diff, etc. - please see the shortlog and Git log for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (252 commits) tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools build: Check if gettid() is available before providing helper perf jvmti: Address gcc string overflow warning for strncpy() perf python: Remove -fstack-protector-strong if clang doesn't have it perf annotate TUI browser: Do not use member from variable within its own initialization perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64 perf evsel: Do not rely on errno values for precise_ip fallback perf thread: Allow references to thread objects after machine__exit() perf header: Assign proper ff->ph in perf_event__synthesize_features() tools arch kvm: Sync kvm headers with the kernel sources perf script: Allow specifying the files to process guest samples perf tools metric: Don't include duration_time in group perf list: Avoid extra : for --raw metrics perf vendor events intel: Metric fixes for SKX/CLX perf tools: Fix typos / broken sentences perf jevents: Add support for Hisi hip08 L3C PMU aliasing perf jevents: Add support for Hisi hip08 HHA PMU aliasing perf jevents: Add support for Hisi hip08 DDRC PMU aliasing perf pmu: Support more complex PMU event aliasing perf diff: Documentation -c cycles option ...
2019-07-09tools lib: Adopt zalloc()/zfree() from tools/perfArnaldo Carvalho de Melo
Eroding a bit more the tools/perf/util/util.h hodpodge header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-08Merge branch 'for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Documentation updates and the addition of cgroup_parse_float() which will be used by new controllers including blk-iocost" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: convert docs to ReST and rename to *.rst cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS cgroup: add cgroup_parse_float()
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08bpf: sync bpf.h to tools/Stanislav Fomichev
Sync user_ip6 & msg_src_ip6 comments. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05tools: bpftool: add "prog run" subcommand to test-run programsQuentin Monnet
Add a new "bpftool prog run" subcommand to run a loaded program on input data (and possibly with input context) passed by the user. Print output data (and output context if relevant) into a file or into the console. Print return value and duration for the test run into the console. A "repeat" argument can be passed to run the program several times in a row. The command does not perform any kind of verification based on program type (Is this program type allowed to use an input context?) or on data consistency (Can I work with empty input data?), this is left to the kernel. Example invocation: # perl -e 'print "\x0" x 14' | ./bpftool prog run \ pinned /sys/fs/bpf/sample_ret0 \ data_in - data_out - repeat 5 0000000 0000 0000 0000 0000 0000 0000 0000 | ........ ...... Return value: 0, duration (average): 260ns When one of data_in or ctx_in is "-", bpftool reads from standard input, in binary format. Other formats (JSON, hexdump) might be supported (via an optional command line keyword like "data_fmt_in") in the future if relevant, but this would require doing more parsing in bpftool. v2: - Fix argument names for function check_single_stdin(). (Yonghong) Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-07-03 The following pull-request contains BPF updates for your *net-next* tree. There is a minor merge conflict in mlx5 due to 8960b38932be ("linux/dim: Rename externally used net_dim members") which has been pulled into your tree in the meantime, but resolution seems not that bad ... getting current bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed just so he's aware of the resolution below: ** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD static int mlx5e_open_cq(struct mlx5e_channel *c, struct dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) ======= int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Resolution is to take the second chunk and rename net_dim_cq_moder into dim_cq_moder. Also the signature for mlx5e_open_cq() in ... drivers/net/ethernet/mellanox/mlx5/core/en.h +977 ... and in mlx5e_open_xsk() ... drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64 ... needs the same rename from net_dim_cq_moder into dim_cq_moder. ** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix)); struct dim_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; struct mlx5e_channel *c; unsigned int irq; ======= struct net_dim_cq_moder icocq_moder = {0, 0}; >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Take the second chunk and rename net_dim_cq_moder into dim_cq_moder as well. Let me know if you run into any issues. Anyway, the main changes are: 1) Long-awaited AF_XDP support for mlx5e driver, from Maxim. 2) Addition of two new per-cgroup BPF hooks for getsockopt and setsockopt along with a new sockopt program type which allows more fine-grained pass/reject settings for containers. Also add a sock_ops callback that can be selectively enabled on a per-socket basis and is executed for every RTT to help tracking TCP statistics, both features from Stanislav. 3) Follow-up fix from loops in precision tracking which was not propagating precision marks and as a result verifier assumed that some branches were not taken and therefore wrongly removed as dead code, from Alexei. 4) Fix BPF cgroup release synchronization race which could lead to a double-free if a leaf's cgroup_bpf object is released and a new BPF program is attached to the one of ancestor cgroups in parallel, from Roman. 5) Support for bulking XDP_TX on veth devices which improves performance in some cases by around 9%, from Toshiaki. 6) Allow for lookups into BPF devmap and improve feedback when calling into bpf_redirect_map() as lookup is now performed right away in the helper itself, from Toke. 7) Add support for fq's Earliest Departure Time to the Host Bandwidth Manager (HBM) sample BPF program, from Lawrence. 8) Various cleanups and minor fixes all over the place from many others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-04bonding: add an option to specify a delay between peer notificationsVincent Bernat
Currently, gratuitous ARP/ND packets are sent every `miimon' milliseconds. This commit allows a user to specify a custom delay through a new option, `peer_notif_delay'. Like for `updelay' and `downdelay', this delay should be a multiple of `miimon' to avoid managing an additional work queue. The configuration logic is copied from `updelay' and `downdelay'. However, the default value cannot be set using a module parameter: Netlink or sysfs should be used to configure this feature. When setting `miimon' to 100 and `peer_notif_delay' to 500, we can observe the 500 ms delay is respected: 20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 In bond_mii_monitor(), I have tried to keep the lock logic readable. The change is due to the fact we cannot rely on a notification to lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is only triggered once every N times, while we need to decrement the counter each time. iproute2 also needs to be updated to be able to specify this new attribute through `ip link'. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03bpf/tools: sync bpf.hStanislav Fomichev
Sync new bpf_tcp_sock fields and new BPF_PROG_TYPE_SOCK_OPS RTT callback. Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-01tools lib: Move argv_{split,free} from tools/perf/util/Arnaldo Carvalho de Melo
This came from the kernel lib/argv_split.c, so move it to tools/lib/argv_split.c, to get it closer to the kernel structure. We need to audit the usage of argv_split() to figure out if it is really necessary to do have one allocation per argv[] entry, looking at one of its users I guess that is not the case and we probably are even leaking those allocations by not using argv_free() judiciously, for later. With this we further remove stuff from tools/perf/util/, reducing the perf specific codebase and encouraging other tools/ code to use these routines so as to keep the style and constructs used with the kernel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-j479s1ive9h75w5lfg16jroz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01tools lib: Adopt strreplace() from the kernelArnaldo Carvalho de Melo
We'll use it to further reduce the size of tools/perf/util/string.c, replacing the strxfrchar() equivalent function we have there. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x3r61ikjrso1buygxwke8id3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-29bpf: fix uapi bpf_prog_info fields alignmentBaruch Siach
Merge commit 1c8c5a9d38f60 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the fix from commit 36f9814a494 ("bpf: fix uapi hole for 32 bit compat applications") by taking the gpl_compatible 1-bit field definition from commit b85fab0e67b162 ("bpf: Add gpl_compatible flag to struct bpf_prog_info") as is. That breaks architectures with 16-bit alignment like m68k. Add 31-bit pad after gpl_compatible to restore alignment of following fields. Thanks to Dmitry V. Levin his analysis of this bug history. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Song Liu <songliubraving@fb.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-28Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull rcu/next + tools/memory-model changes from Paul E. McKenney: - RCU flavor consolidation cleanups and optmizations - Documentation updates - Miscellaneous fixes - SRCU updates - RCU-sync flavor consolidation - Torture-test updates - Linux-kernel memory-consistency-model updates, most notably the addition of plain C-language accesses Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-27bpf: sync bpf.h to tools/Stanislav Fomichev
Export new prog type and hook points to the libbpf. Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-27xsk: Add getsockopt XDP_OPTIONSMaxim Mikityanskiy
Make it possible for the application to determine whether the AF_XDP socket is running in zero-copy mode. To achieve this, add a new getsockopt option XDP_OPTIONS that returns flags. The only flag supported for now is the zero-copy mode indicator. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-26tools lib: Adopt strim() from the kernelArnaldo Carvalho de Melo
Since we're working on moving stuff out of tools/perf/util/ to tools/lib/, take the opportunity to adopt routines from the kernel that are equivalent, so that tools/ code look more like the kernel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: André Goddard Rosa <andre.goddard@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-zqy1zdu2ok17qvi0ytk8z13c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25tools lib: Adopt skip_spaces() from the kernel sourcesArnaldo Carvalho de Melo
Same implementation, will be used to replace ad-hoc equivalent code in tools/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: André Goddard Rosa <andre.goddard@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-dig691cg9ripvoiprpidthw7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25tools perf: Move from sane_ctype.h obtained from git to the Linux's originalArnaldo Carvalho de Melo
We got the sane_ctype.h headers from git and kept using it so far, but since that code originally came from the kernel sources to the git sources, perhaps its better to just use the one in the kernel, so that we can leverage tools/perf/check_headers.sh to be notified when our copy gets out of sync, i.e. when fixes or goodies are added to the code we've copied. This will help with things like tools/lib/string.c where we want to have more things in common with the kernel, such as strim(), skip_spaces(), etc so as to go on removing the things that we have in tools/perf/util/ and instead using the code in the kernel, indirectly and removing things like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements are made to the original code. Hopefully this also should help with reducing the difference of code hosted in tools/ to the one in the kernel proper. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-24Merge tag 'v5.2-rc6' into perf/core, to refresh branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-06-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin. 2) BTF based map definition, from Andrii. 3) support bpf_map_lookup_elem for xskmap, from Jonathan. 4) bounded loops and scalar precision logic in the verifier, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: sched: remove NET_CLS_IND config optionJiri Pirko
This config option makes only couple of lines optional. Two small helpers and an int in couple of cls structs. Remove the config option and always compile this in. This saves the user from unexpected surprises when he adds a filter with ingress device match which is silently ignored in case the config option is not set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15bpf/tools: sync bpf.hStanislav Fomichev
Add sk to struct bpf_sock_addr and struct bpf_sock_ops. Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-15bpf: Sync asm-generic/socket.h to tools/Martin KaFai Lau
SO_DETACH_REUSEPORT_BPF is needed for the test in the next patch. It is defined in the socket.h. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-14docs: cgroup-v1: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
Convert the cgroup-v1 files to ReST format, in order to allow a later addition to the admin-guide. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-06-14Merge tag 'v5.2-rc4' into mauroJonathan Corbet
We need to pick up post-rc1 changes to various document files so they don't get lost in Mauro's massive RST conversion push.
2019-06-13rcu: Don't return a value from rcu_assign_pointer()Andrea Parri
Quoting Paul [1]: "Given that a quick (and perhaps error-prone) search of the uses of rcu_assign_pointer() in v5.1 didn't find a single use of the return value, let's please instead change the documentation and implementation to eliminate the return value." [1] https://lkml.kernel.org/r/20190523135013.GL28207@linux.ibm.com Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: rcu@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-06-13bpf: sync BPF_FIB_LOOKUP flag changes with BPF uapiMartynas Pumputis
Sync the changes to the flags made in "bpf: simplify definition of BPF_FIB_LOOKUP related flags" with the BPF UAPI headers. Doing in a separate commit to ease syncing of github/libbpf. Signed-off-by: Martynas Pumputis <m@lambda.lt> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-10bpf/tools: sync bpf.hJonathan Lemon
Sync uapi/linux/bpf.h Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-06-07 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix several bugs in riscv64 JIT code emission which forgot to clear high 32-bits for alu32 ops, from Björn and Luke with selftests covering all relevant BPF alu ops from Björn and Jiong. 2) Two fixes for UDP BPF reuseport that avoid calling the program in case of __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption that skb->data is pointing to transport header, from Martin. 3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog workqueue, and a missing restore of sk_write_space when psock gets dropped, from Jakub and John. 4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it breaks standard applications like DNS if reverse NAT is not performed upon receive, from Daniel. 5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6 fails to verify that the length of the tuple is long enough, from Lorenz. 6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for {un,}successful probe) as that is expected to be propagated as an fd to load_sk_storage_btf() and thus closing the wrong descriptor otherwise, from Michal. 7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir. 8) Minor misc fixes in docs, samples and selftests, from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06bpf: sync tooling uapi headerDaniel Borkmann
Sync BPF uapi header in order to pull in BPF_CGROUP_UDP{4,6}_RECVMSG attach types. This is done and preferred as an extra patch in order to ease sync of libbpf. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-04KVM: X86: Provide a capability to disable cstate msr read interceptsWanpeng Li
Allow guest reads CORE cstate when exposing host CPU power management capabilities to the guest. PKG cstate is restricted to avoid a guest to get the whole package information in multi-tenant scenario. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03Merge tag 'v5.2-rc3' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "On the kernel side there's a bunch of ring-buffer ordering fixes for a reproducible bug, plus a PEBS constraints regression fix. Plus tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Fix s390 missing module symbol and warning for non-root users perf machine: Read also the end of the kernel perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms perf session: Add missing swap ops for namespace events perf namespace: Protect reading thread's namespace tools headers UAPI: Sync drm/drm.h with the kernel tools headers UAPI: Sync drm/i915_drm.h with the kernel tools headers UAPI: Sync linux/fs.h with the kernel tools headers UAPI: Sync linux/sched.h with the kernel tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel perf data: Fix 'strncat may truncate' build failure with recent gcc perf/ring-buffer: Use regular variables for nesting perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data perf/ring_buffer: Add ordering to rb->nest increment perf/ring_buffer: Fix exposing a temporarily decreased data_head perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-05-31 The following pull-request contains BPF updates for your *net-next* tree. Lots of exciting new features in the first PR of this developement cycle! The main changes are: 1) misc verifier improvements, from Alexei. 2) bpftool can now convert btf to valid C, from Andrii. 3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs. This feature greatly improves BPF speed on 32-bit architectures. From Jiong. 4) cgroups will now auto-detach bpf programs. This fixes issue of thousands bpf programs got stuck in dying cgroups. From Roman. 5) new bpf_send_signal() helper, from Yonghong. 6) cgroup inet skb programs can signal CN to the stack, from Lawrence. 7) miscellaneous cleanups, from many developers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29selftests/bpf: fix compilation error for flow_dissector.cAlan Maguire
When building the tools/testing/selftest/bpf subdirectory, (running both a local directory "make" and a "make -C tools/testing/selftests/bpf") I keep hitting the following compilation error: prog_tests/flow_dissector.c: In function ‘create_tap’: prog_tests/flow_dissector.c:150:38: error: ‘IFF_NAPI’ undeclared (first use in this function) .ifr_flags = IFF_TAP | IFF_NO_PI | IFF_NAPI | IFF_NAPI_FRAGS, ^ prog_tests/flow_dissector.c:150:38: note: each undeclared identifier is reported only once for each function it appears in prog_tests/flow_dissector.c:150:49: error: ‘IFF_NAPI_FRAGS’ undeclared Adding include/uapi/linux/if_tun.h to tools/include/uapi/linux resolves the problem and ensures the compilation of the file does not depend on having up-to-date kernel headers locally. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-28perf script: Pad DSO name for --call-traceJiri Olsa
Pad the DSO name in --call-trace so we don't have the indent screwed by different DSO name lengths, as now for kernel there's also BPF code displayed. # perf-with-kcore record pt -e intel_pt//ku -- sleep 1 # perf-core/perf-with-kcore script pt --call-trace Before: sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) kretprobe_perf_func sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) trace_call_bpf sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806464404: ([kernel.kallsyms]) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_get_current_pid_tgid sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_ktime_get_ns sleep 3660 [16] 57036.806464725: ([kernel.kallsyms]) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806464725: ([kernel.kallsyms]) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806465045: (bpf_prog_da4fe6b3d2c29b25_trace_return) __htab_map_lookup_elem sleep 3660 [16] 57036.806465366: ([kernel.kallsyms]) memcmp sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_probe_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) probe_kernel_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) __check_object_size sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) check_stack_object sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) copy_user_enhanced_fast_string sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_probe_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) probe_kernel_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) __check_object_size sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) check_stack_object sleep 3660 [16] 57036.806465687: ([kernel.kallsyms]) copy_user_enhanced_fast_string sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_get_current_uid_gid sleep 3660 [16] 57036.806466008: ([kernel.kallsyms]) from_kgid sleep 3660 [16] 57036.806466008: ([kernel.kallsyms]) from_kuid sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return) bpf_perf_event_output sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) perf_event_output sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) perf_prepare_sample sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) perf_misc_flags sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806466328: ([kernel.kallsyms]) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806466328: ([kvm]) kvm_is_in_guest sleep 3660 [16] 57036.806466649: ([kernel.kallsyms]) __perf_event_header__init_id.isra.0 sleep 3660 [16] 57036.806466649: ([kernel.kallsyms]) perf_output_begin After: sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) kretprobe_perf_func sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) trace_call_bpf sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806464404: ([kernel.kallsyms] ) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_get_current_pid_tgid sleep 3660 [16] 57036.806464725: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_ktime_get_ns sleep 3660 [16] 57036.806464725: ([kernel.kallsyms] ) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806464725: ([kernel.kallsyms] ) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806465045: (bpf_prog_da4fe6b3d2c29b25_trace_return ) __htab_map_lookup_elem sleep 3660 [16] 57036.806465366: ([kernel.kallsyms] ) memcmp sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_probe_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) probe_kernel_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) __check_object_size sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) check_stack_object sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) copy_user_enhanced_fast_string sleep 3660 [16] 57036.806465687: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_probe_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) probe_kernel_read sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) __check_object_size sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) check_stack_object sleep 3660 [16] 57036.806465687: ([kernel.kallsyms] ) copy_user_enhanced_fast_string sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_get_current_uid_gid sleep 3660 [16] 57036.806466008: ([kernel.kallsyms] ) from_kgid sleep 3660 [16] 57036.806466008: ([kernel.kallsyms] ) from_kuid sleep 3660 [16] 57036.806466008: (bpf_prog_da4fe6b3d2c29b25_trace_return ) bpf_perf_event_output sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) perf_event_output sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) perf_prepare_sample sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) perf_misc_flags sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) __x86_indirect_thunk_rax sleep 3660 [16] 57036.806466328: ([kernel.kallsyms] ) __x86_indirect_thunk_rax Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190508132010.14512-8-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-28tools headers UAPI: Sync kvm.h headers with the kernel sourcesArnaldo Carvalho de Melo
dd53f6102c30 ("Merge tag 'kvmarm-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD") 59c5c58c5b93 ("Merge tag 'kvm-ppc-next-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD") d7547c55cbe7 ("KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2") 6520ca64cde7 ("KVM: PPC: Book3S HV: XIVE: Add a mapping for the source ESB pages") 39e9af3de5ca ("KVM: PPC: Book3S HV: XIVE: Add a TIMA mapping") e4945b9da52b ("KVM: PPC: Book3S HV: XIVE: Add get/set accessors for the VP XIVE state") e6714bd1671d ("KVM: PPC: Book3S HV: XIVE: Add a control to dirty the XIVE EQ pages") 7b46b6169ab8 ("KVM: PPC: Book3S HV: XIVE: Add a control to sync the sources") 5ca806474859 ("KVM: PPC: Book3S HV: XIVE: Add a global reset control") 13ce3297c576 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration") e8676ce50e22 ("KVM: PPC: Book3S HV: XIVE: Add a control to configure a source") 4131f83c3d64 ("KVM: PPC: Book3S HV: XIVE: add a control to initialize a source") eacc56bb9de3 ("KVM: PPC: Book3S HV: XIVE: Introduce a new capability KVM_CAP_PPC_IRQ_XIVE") 90c73795afa2 ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode") 4f45b90e1c03 ("KVM: s390: add deflate conversion facilty to cpu model") a243c16d18be ("KVM: arm64: Add capability to advertise ptrauth for guest") a22fa321d13b ("KVM: arm64: Add userspace flag to enable pointer authentication") 4bd774e57b29 ("KVM: arm64/sve: Simplify KVM_REG_ARM64_SVE_VLS array sizing") 8ae6efdde451 ("KVM: arm64/sve: Clean up UAPI register ID definitions") 173aec2d5a9f ("KVM: s390: add enhanced sort facilty to cpu model") 555f3d03e7fb ("KVM: arm64: Add a capability to advertise SVE support") 9033bba4b535 ("KVM: arm64/sve: Add pseudo-register for the guest's vector lengths") 7dd32a0d0103 ("KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl") e1c9c98345b3 ("KVM: arm64/sve: Add SVE support to register access ioctl interface") 2b953ea34812 ("KVM: Allow 2048-bit register access via ioctl interface") None entails changes in tooling, the closest to that were some new arch specific ioctls, that are still not handled by the tools/perf/trace/beauty/ library, that needs to create per-arch tables to convert ioctl cmd->string (and back). From a quick look the arch specific kvm-stat.c files at: $ ls -1 tools/perf/arch/*/util/kvm-stat.c tools/perf/arch/powerpc/util/kvm-stat.c tools/perf/arch/s390/util/kvm-stat.c tools/perf/arch/x86/util/kvm-stat.c $ Are not affected. This silences these perf building warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h' diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h' diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cédric Le Goater <clg@kaod.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Peter Xu <peterx@redhat.com> Link: https://lkml.kernel.org/n/tip-3msmqjenlmb7eygcdnmlqaq1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-28tools headers UAPI: Sync drm/drm.h with the kernelArnaldo Carvalho de Melo
To pick up the changes in these csets: 060cebb20cdb ("drm: introduce a capability flag for syncobj timeline support") 50d1ebef79ef ("drm/syncobj: add timeline signal ioctl for syncobj v5") ea569910cbab ("drm/syncobj: add transition iotcls between binary and timeline v2") 27b575a9aa2f ("drm/syncobj: add timeline payload query ioctl v6") 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") 783195ec1cad ("drm/syncobj: disable the timeline UAPI for now v2") 48197bc564c7 ("drm: add syncobj timeline support v9") Which automagically results in the following new ioctls being recognized by the 'perf trace' ioctl cmd arg beautifier: $ tools/perf/trace/beauty/drm_ioctl.sh > /tmp/before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2019-05-22 10:25:31.443151182 -0300 +++ /tmp/after 2019-05-22 10:25:46.449354819 -0300 @@ -103,6 +103,10 @@ [0xC7] = "MODE_LIST_LESSEES", [0xC8] = "MODE_GET_LEASE", [0xC9] = "MODE_REVOKE_LEASE", + [0xCA] = "SYNCOBJ_TIMELINE_WAIT", + [0xCB] = "SYNCOBJ_QUERY", + [0xCC] = "SYNCOBJ_TRANSFER", + [0xCD] = "SYNCOBJ_TIMELINE_SIGNAL", [DRM_COMMAND_BASE + 0x00] = "I915_INIT", [DRM_COMMAND_BASE + 0x01] = "I915_FLUSH", [DRM_COMMAND_BASE + 0x02] = "I915_FLIP", $ I.e. the strace like raw_tracepoint:sys_enter handler in 'perf trace' will get the cmd integer value and map it to the string. At some point it should be possible to translate from string to integer and use to filter using expressions such as: # perf trace -e ioctl/cmd==DRM_IOCTL_SYNCOBJ*/ Or some more suitable syntax to express that only these ioctls when acting on DRM fds should be shown. Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-jrc9ogw33w4zgqc3pu7o1l3g@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-28tools headers UAPI: Sync drm/i915_drm.h with the kernelArnaldo Carvalho de Melo
To pick up the changes from: d1172ab3d443 ("drm/i915: Introduce struct class_instance for engines across the uAPI") 96fd2c6633b0 ("drm/i915: Drop new chunks of context creation ABI (for now)") ea593dbba4c8 ("drm/i915: Allow contexts to share a single timeline across all engines") b91715417244 ("drm/i915: Extend CONTEXT_CREATE to set parameters upon construction") e0695db7298e ("drm/i915: Create/destroy VM (ppGTT) for use with contexts") 9d1305ef80b9 ("drm/i915: Introduce the i915_user_extension_method") c8b502422bfe ("drm/i915: Remove last traces of exec-id (GEM_BUSY)") d90c06d57027 ("drm/i915: Fix I915_EXEC_RING_MASK") e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") be03564bd7b6 ("drm/i915: Include reminders about leaving no holes in uAPI enums") ba4fda620a5f ("drm/i915: Optionally disable automatic recovery after a GPU reset") We still don't take into account the _IOC_SIZE() to differentiate ioctl cmds, so more work is needed to support the extension mechanism that is being used here so that we can differentiate DRM_IOCTL_I915_GEM_CONTEXT_CREATE from the newly introduced DRM_IOCTL_I915_GEM_CONTEXT_CREATE_EXT cmd. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lkml.kernel.org/n/tip-csn0vanmc7pevyka5qcg0xyw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-28tools headers UAPI: Sync linux/fs.h with the kernelArnaldo Carvalho de Melo
To pick up the changes in: c553ea4fdf27 ("fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback") That should be used to beautify the 'sync_file_range' syscall 'flags' arg. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-at3uoqcvmqdkwaysmvbj1wpv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-28tools headers UAPI: Sync linux/sched.h with the kernelArnaldo Carvalho de Melo
To pick up the change in: b3e583825266 ("clone: add CLONE_PIDFD") This requires changes in the 'perf trace' beautification routines for the 'clone' syscall args, which is done in a followup patch. This silences the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h' diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Christian Brauner <christian@brauner.io> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lenja6gmy26dkt0ybk747qgq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 00:33:37 +0000