| Age | Commit message (Collapse) | Author |
|---|
|
As the namespace support code will use this, which is not available in
some non _GNU_SOURCE libraries such as Android's bionic used in my
container build tests (r12b and r15c at the moment).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
|
|
All conflicts were trivial overlapping changes, so reasonably
easy to resolve.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
perf propagates its feature check results to libbpf. This means
features for which perf probes must be a superset of libbpf's
required features. perf depends on FEATURE_TESTS_BASIC for its list
of features.
commit 531b014e7a2f ("tools: bpf: make use of reallocarray") added
reallocarray use to libbpf, make perf also perform the reallocarray
feature check.
Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS.
Fix this.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Commit 0c3b7e42616f ("tools build: Add support for host programs format")
introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the
variable is HOSTCFLAGS. Fix this up.
Fixes: 0c3b7e42616f ("tools build: Add support for host programs format")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
In 2016 GNU Make made a backwards incompatible change to the way '#'
characters were handled in Makefiles when used inside functions or
macros:
http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Due to this change, when attempting to run `make prepare' I get a
spurious make syntax error:
/home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop.
When inspecting `.fixdep.o.cmd' it includes two lines which use
unescaped comment characters at the top:
\# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep)
\# using basic dep data
This is because `tools/build/Build.include' prints these '\#'
characters:
printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \
This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files
for future Make").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation. Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed. Use feature
detection to probe for existence of reallocarray.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with
orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
if (elf_getshdrnum(elf, &nr_sections)) {
Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.
Now, that new Make behaviour is documented in their NEWS file:
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
C := \#
foo := $(shell echo '$C')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
So we can see the output of feature compile in following files:
tools/build/feature/test-llvm.make.output
tools/build/feature/test-llvm-version.make.output
tools/build/feature/test-clang.make.output
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So they can follow the OUTPUT variable setup as the rest of the
features.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So we can see the status when we build perf, like:
$ make LIBCLANGLLVM=1 VF=1
... cxx: [ on ]
... llvm: [ on ]
... llvm-version: [ on ]
... clang: [ on ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
|
|
The Open CoreSight Decoding Library (openCSD) is a free and open library
to decode traces collected by the CoreSight hardware infrastructure.
This patch adds the required mechanic to recognise the presence of the
openCSD library on a system and set up miscellaneous flags to be used in
the compilation of the trace decoding feature.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: http://lkml.kernel.org/r/1516211539-5166-2-git-send-email-mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1516635644-24819-1-git-send-email-mathieu.poirier@linaro.org
[ Merged missing test-libopencsd.c file, provided later by Mathieu ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
bfd.h is requiring including of config.h except when PACKAGE or
PACKAGE_VERSION are defined.
/* PR 14072: Ensure that config.h is included first. */
#if !defined PACKAGE && !defined PACKAGE_VERSION
#error config.h must be included before this header
#endif
This check has been introduced since May-2012. It doesn't show up in bfd.h
on some Linux distribution, probably because distributions have remove it
when building the package.
However, sometimes the user might just build libfd from source code then
link bpftool against it. For this case, bfd.h will be original that we need
to define PACKAGE or PACKAGE_VERSION.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Bpftool build is broken with binutils version 2.29 and later.
The cause is commit 003ca0fd2286 ("Refactor disassembler selection")
in the binutils repo, which changed the disassembler() function
signature.
Fix this by adding a new "feature" to the tools/build/features
infrastructure and make it responsible for decision which
disassembler() function signature to use.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
As 'perf bench futex wake-parallel" will use this, which is not
available in older systems such as versions of the android NDK used in
my container build tests (r12b and r15c at the moment).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Yang <james.yang@arm.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1i7iv54in4wj08lwo55b0pzv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use $(CC) instead of harcoded gcc binary name.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The BPF feature test as well as libbpf is missing the __NR_bpf
define for s390 and currently refuses to compile (selftest suite
depends on libbpf as well). Similar issue was fixed some time
ago via b0c47807d31d ("bpf: Add sparc support to tools and
samples."), just do the same and add definitions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
refresh the tree
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
And provide an alternative implementation to keep perf building on older
distros as we're about to add initial support for namespaces.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqdwijunhjlvps1ardykhw1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This allows to detect -s (--silent) option without checking GNU Make
version.
As commit e36aaea28972 ("kbuild: Fix silent builds with make-4")
pointed out, GNU Make 4.x changed the way/order it presents the
command line options into MAKEFLAGS.
In Make 3.8x, 's' is always the first in a group of short options.
The group may be prefixed with '-' in some cases.
In Make 4.x, 's' is always the last in a group of short options.
As commit e6ac89fabd03 ("kbuild: Correctly deal with make options
which contain an 's'") addressed, we also need to deal with long
options that contain 's', like --warn-undefined-variables.
Test cases:
[1] command line input: make --silent
-> MAKEFLAGS for Make 3.8x: s
-> MAKEFLAGS for Make 4.x : s
[2] command line input: make -srR
-> MAKEFLAGS for Make 3.8x: sRr
-> MAKEFLAGS for Make 4.x : rRs
[3] command line input: make -s -rR --warn-undefined-variables
-> MAKEFLAGS for Make 3.8x: --warn-undefined-variables -sRr
-> MAKEFLAGS for Make 4.x : rRs --warn-undefined-variables
My idea to cater to all the cases more easily is to filter out long
options (--%), then search 's' with $(findstring ...). This way will
be more future-proof even if future versions of Make put 's' in the
middle of the group.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Pull networking fixes from David Miller:
1) Track alignment in BPF verifier so that legitimate programs won't be
rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
2) Make tail calls work properly in arm64 BPF JIT, from Deniel
Borkmann.
3) Make the configuration and semantics Generic XDP make more sense and
don't allow both generic XDP and a driver specific instance to be
active at the same time. Also from Daniel.
4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.
5) Fix use-after-free in VRF driver, from Gao Feng.
6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
qca_spi driver, from Stefan Wahren.
7) Always run cleanup routines in BPF samples when we get SIGTERM, from
Andy Gospodarek.
8) The mdio phy code should bring PHYs out of reset using the shared
GPIO lines before invoking bus->reset(). From Florian Fainelli.
9) Some USB descriptor access endian fixes in various drivers from
Johan Hovold.
10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
Pressman.
11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.
12) Cure netdev leak in AF_PACKET when using timestamping via control
messages. From Douglas Caetano dos Santos.
13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
Lichvar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
ldmvsw: stop the clean timer at beginning of remove
ldmvsw: unregistering netdev before disable hardware
net: netcp: fix check of requested timestamping filter
ipv6: avoid dad-failures for addresses with NODAD
qed: Fix uninitialized data in aRFS infrastructure
mdio: mux: fix device_node_continue.cocci warnings
net/packet: fix missing net_device reference release
net/mlx4_core: Use min3 to select number of MSI-X vectors
macvlan: Fix performance issues with vlan tagged packets
net: stmmac: use correct pointer when printing normal descriptor ring
net/mlx5: Use underlay QPN from the root name space
net/mlx5e: IPoIB, Only support regular RQ for now
net/mlx5e: Fix setup TC ndo
net/mlx5e: Fix ethtool pause support and advertise reporting
net/mlx5e: Use the correct pause values for ethtool advertising
vmxnet3: ensure that adapter is in proper state during force_close
sfc: revert changes to NIC revision numbers
net: ch9200: add missing USB-descriptor endianness conversions
net: irda: irda-usb: fix firmware name on big-endian hosts
net: dsa: mv88e6xxx: add default case to switch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates/fixes from Ingo Molnar:
"Mostly tooling updates, but also two kernel fixes: a call chain
handling robustness fix and an x86 PMU driver event definition fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/callchain: Force USER_DS when invoking perf_callchain_user()
tools build: Fixup sched_getcpu feature test
perf tests kmod-path: Don't fail if compressed modules aren't supported
perf annotate: Fix AArch64 comment char
perf tools: Fix spelling mistakes
perf/x86: Fix Broadwell-EP DRAM RAPL events
perf config: Refactor a duplicated code for obtaining config file name
perf symbols: Allow user probes on versioned symbols
perf symbols: Accept symbols starting at address 0
tools lib string: Adopt prefixcmp() from perf and subcmd
perf units: Move parse_tag_value() to units.[ch]
perf ui gtk: Move gtk .so name to the only place where it is used
perf tools: Move HAS_BOOL define to where perl headers are used
perf memswap: Split the byteswap memory range wrappers from util.[ch]
perf tools: Move event prototypes from util.h to event.h
perf buildid: Move prototypes from util.h to build-id.h
|
|
Add a new field, "prog_flags", and an initial flag value
BPF_F_STRICT_ALIGNMENT.
When set, the verifier will enforce strict pointer alignment
regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS.
The verifier, in this mode, will also use a fixed value of "2" in
place of NET_IP_ALIGN.
This facilitates test cases that will exercise and validate this part
of the verifier even when run on architectures where alignment doesn't
matter.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
We have tools/build/feature/test-all.c to speed up feature testing,
doing all tests at once, but then all tests in this file should normally
pass.
That is not the case with the sched-getcpu one, that wasn't passing when
included from test-all.c because it needs to have _GNU_SOURCE defined
before including sched.h, but _GNU_SOURCE is defined by a header
included from another feature test included earlier in test-all.d,
test-libpython.c, resulting in:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:121:0:
test-sched_getcpu.c:1:0: error: "_GNU_SOURCE" redefined [-Werror]
#define _GNU_SOURCE
In file included from /usr/include/python2.7/pyconfig.h:6:0,
from /usr/include/python2.7/Python.h:8,
from test-libpython.c:1,
from test-all.c:13:
/usr/include/python2.7/pyconfig-64.h:1177:0: note: this is the location of the previous definition
#define _GNU_SOURCE 1
cc1: all warnings being treated as errors
Which would trigger testing the tests individually, when that
_GNU_SOURCE redefinition would not take place, and the whole process
would continue, just slower... Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 120010cb1eea ("tools build: Add test for sched_getcpu()")
Link: http://lkml.kernel.org/n/tip-3qp1it69xsc4w8gnuu1e9ayh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This change is a follow up of https://lkml.org/lkml/2017/2/2/16
The patch above avoided redefining CC, CXX and PKG_CONFIG in feature
detection. The patch was not merged due to a unsolved concern with the
-MD flag.
Later, commit c8c188679ccf ("tools build: Use the same CC for feature
detection and actual build") did the change for CC and CXX but not
PKG_CONFIG.
This patch makes PKG_CONFIG consistent with CC and CXX and moves the -MD
to CFLAGS, as suggested by Jiri in the thread above.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
( This is a rebased version of https://lkml.org/lkml/2017/2/7/662 )
Python's CC and link Makefile variables were not passed to feature
detection, causing feature detection to use system's Python rather than
PYTHON_CONFIG's one. This created a mismatch between the detected Python
support and the one actually used by perf when PYTHON_CONFIG is
specified.
Fix it by moving Python's variable initialization to before feature
detection and pass FLAGS_PYTHON_EMBED to Python's feature detection's
build target.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When build with: 'make CC=clang' we were not using that CC to do
feature detection, which resulted in features being detected with gcc
and then the actual tools being built with clang.
Most of the time these compilers are compatible enough, so no
problem was being noticed.
As soon as a system with an old enough clang, one that hasn't
the cpuid.h header is used, and a gcc with it, the "get_cpuid" feature
will be found available but then code that will use can't be compiled.
Noticed with this combination:
/ $ gcc --version | head -1
gcc (Alpine 6.3.0) 6.3.0
/ $ clang --version | head -1
clang version 3.8.1 (tags/RELEASE_381/final)
/ $ cat /etc/alpine-release
3.5.0
/ $
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-60q18nvlvgpyfv7e2qqgx4ou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of trying to go on adding more ifdef conditions, do a feature
test and define HAVE_SCHED_GETCPU_SUPPORT instead, then use it to
provide the prototype. No need to change the stub, as it is already a
__weak symbol.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yge89er9g90sc0v6k0a0r5tr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ingo reported following build failure:
On Sat, Feb 11, 2017 at 12:12:34PM +0100, Ingo Molnar wrote:
>
> So I had this oldish 32-bit 15.10 Ubuntu installation around (fully updated), and
> trying to build perf gave me:
>
> deimos:~/tip/tools/perf> make
> BUILD: Doing 'make -j4' parallel build
> make[3]: *** No rule to make target '/usr/include/x86_64-linux-gnu/sys/types.h', needed by 'fixdep.o'. Stop.
> Makefile:42: recipe for target 'fixdep-in.o' failed
> make[2]: *** [fixdep-in.o] Error 2
> /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed
> make[1]: *** [fixdep] Error 2
> Makefile:68: recipe for target 'all' failed
> make: *** [all] Error 2
>
> Now this got a bit better after I did a 'make mrproper' in the kernel tree:
>
> deimos:~/tip/tools/perf> make
> BUILD: Doing 'make -j4' parallel build
> HOSTCC fixdep.o
> /home/mingo/tip/tools/build/fixdep: 1: /home/mingo/tip/tools/build/fixdep: Syntax error: "(" unexpected
> /home/mingo/tip/tools/build/Makefile.build:101: recipe for target 'fixdep.o' failed
> make[3]: *** [fixdep.o] Error 2
> Makefile:42: recipe for target 'fixdep-in.o' failed
> make[2]: *** [fixdep-in.o] Error 2
> /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed
> make[1]: *** [fixdep] Error 2
> Makefile:68: recipe for target 'all' failed
> make: *** [all] Error 2
>
> After some digging it turns out that my 'fixdep' binary was 64-bit:
>
> deimos:~/tip/tools/perf> file /home/mingo/tip/tools/build/fixdep
> /home/mingo/tip/tools/build/fixdep: ELF 64-bit LSB executable, x86-64, version 1
> (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
> 2.6.32, BuildID[sha1]=d527f736b57b5ba47210fbcb562a3b52867d21c1, not stripped
>
> But it did not get cleaned out by 'make clean'.
>
> Only after I did a 'make clean' in tools/ itself, did it get built properly.
It shows we don't clean up properly the fixdep objects, so adding
special rule for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When doing a kernel build with 'make -s', everything is silenced except
the objtool build. That's because the tools tree support for silent
builds is some combination of missing and broken.
Three changes are needed to fix it:
- Makefile: propagate '-s' to the sub-make's MAKEFLAGS variable so the
tools Makefiles can see it.
- tools/scripts/Makefile.include: fix the tools Makefiles' ability to
recognize '-s'. The MAKE_VERSION and MAKEFLAGS checks are copied from
the top-level Makefile. This silences the "DESCEND objtool" message.
- tools/build/Makefile.build: add support to the tools Build files for
recognizing '-s'. Again the MAKE_VERSION and MAKEFLAGS checks are
copied from the top-level Makefile. This silences all the object
compile/link messages.
Reported-and-Tested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Link: http://lkml.kernel.org/r/e8967562ef640c3ae9a76da4ae0f4e47df737c34.1484799200.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
|
|
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Cancel builtin llvm and clang support when LLVM version is less than
3.9.0: following commits uses newer API.
Since Clang/LLVM's API is not guaranteed to be stable, add a
test-llvm-version.cpp feature checker, issue warning if LLVM found in
compiling environment is not tested yet.
Committer Notes:
Testing it:
Environment:
$ cat /etc/fedora-release
Fedora release 25 (Twenty Five)
$ rpm -q llvm-devel clang-devel
llvm-devel-3.8.0-1.fc25.x86_64
clang-devel-3.8.0-2.fc25.x86_64
$
Before:
$ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel
INSTALL GTK UI
LINK /tmp/build/perf/perf
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)'
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)'
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)'
<SNIP>
After:
Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0)
Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot
to git pull, duh) combo, all works as expected, it is properly detected
and built into the resulting perf binary.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com
[ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We've been hit several times by a Makefile bug where line indented by
tab was falsely considered as target command.
We prevent this by always using space indentation for everything except
for the target commands.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Putting extra line between dependencies and cmd_* definition
to make it more readable.
Before:
$ cat .builtin-top.o.cmd
...
/home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \
/home/jolsa/kernel/linux-perf/tools/include/linux/time64.h
cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-...
...
After:
$ cat .builtin-top.o.cmd
...
/home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \
/home/jolsa/kernel/linux-perf/tools/include/linux/time64.h
cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-...
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Check if basic clang compiling environment is ready.
Doesn't like 'llvm-config --libs' which can returns llvm libraries in right
order and duplicates some libraries if necessary, there's no correspondence for
clang libraries (-lclangxxx). to avoid extra complexity and to avoid new clang
breaking libraries ordering, use --start-group and --end-group.
In this test case, manually identify required clang libs and hope it to be
stable. Putting all clang libraries here is possible (use make's wildcard), but
then feature checking becomes very slow.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-9-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Check if basic LLVM compiling environment is ready.
Use llvm-config to detect include and library directories. Avoid using
'llvm-config --cxxflags' because its result contain some unwanted flags
like --sysroot (if LLVM is built by yocto).
Use '?=' to set LLVM_CONFIG, so explicitly passing LLVM_CONFIG to make
would override it.
Use 'llvm-config --libs BPF' to check if BPF backend is compiled in.
Since now BPF bytecode is the only required backend, no need to waste
time linking llvm and clang if BPF backend is missing. This also
introduce an implicit requirement that LLVM should be new enough. Old
LLVM doesn't support BPF backend.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-8-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Clang doesn't support multiple arguments being passed to -Wp, so split
them.
Fixes this error:
HOSTCC tools/objtool/fixdep.o
cat: tools/objtool/.fixdep.o.d: No such file or directory
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161128024346.17371-1-pefoley2@pefoley.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The fixdep tool, among other things, replaces the target of the object
in the gcc generated dependency output file.
The parsing code assumes there's only single target in the rule but this
is not always the case as described in here:
https://gcc.gnu.org/ml/gcc-help/2016-11/msg00099.html
Make the fixdep code smart enough to skip all the possible targets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161201130025.GA16430@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding support to detect jvmti support. It is not plugged into the
FEATURE_TESTS machinery, because it's quite rare and will be used
separately from perf via feature_check call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding support to remove options from final CFLAGS for both object file
and build target. It's now possible to remove CFLAGS options like:
CFLAGS_REMOVE_krava.o += -Wstrict-prototypes
Committer notes:
This comes from the kernel's kbuild infrastructure, the subset that is
supported in tools/ is being documented at tools/build/Documentation/Build.txt.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Check if g++ is available. The result will be used by builtin clang and
LLVM support. Since LLVM requires C++11, this feature detector checks
std::move().
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1474874832-134786-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
