summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26ALSA: seq-dummy: remove deadlock-causing events on closeClemens Ladisch
When the last subscriber to a "Through" port has been removed, the subscribed destination ports might still be active, so it would be wrong to send "all sounds off" and "reset controller" events to them. The proper place for such a shutdown would be the closing of the actual MIDI port (and close_substream() in rawmidi.c already can do this). This also fixes a deadlock when dummy_unuse() tries to send events to its own port that is already locked because it is being freed. Reported-by: Peter Billam <peter@www.pjb.com.au> Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/simple', ↵Mark Brown
'asoc/fix/ts3a227e', 'asoc/fix/wm8904' and 'asoc/fix/wm8960' into asoc-linus
2015-01-26Merge remote-tracking branches 'asoc/fix/adi', 'asoc/fix/compress', ↵Mark Brown
'asoc/fix/fsl-ssi', 'asoc/fix/imx', 'asoc/fix/intel', 'asoc/fix/omap', 'asoc/fix/rockchip' and 'asoc/fix/rt286' into asoc-linus
2015-01-26Merge remote-tracking branch 'asoc/fix/pcm512x' into asoc-linusMark Brown
2015-01-26Merge remote-tracking branch 'asoc/fix/fsl-esai' into asoc-linusMark Brown
2015-01-18ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210Jason Lee Cragg
Signed-off-by: Jason Lee Cragg <jcragg@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: firewire-lib: limit the MIDI data rateClemens Ladisch
Do no send MIDI bytes at the full rate at which FireWire packets happen to be sent, but restrict them to the actual rate of a real MIDI port. This is required by the specification, and prevents data loss when the device's buffer overruns. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: firewire-lib: remove rx_blocks_for_midi quirkClemens Ladisch
There are several devices that expect to receive MIDI data only in the first eight data blocks of a packet. If the driver restricts the data rate to the allowed rate (as mandated by the specification, but not yet implemented by this driver), this happens naturally. Therefore, there is no reason to ever try to use more data packets with any device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ASoC: omap-mcbsp: Correct CBM_CFS dai format configurationPeter Ujfalusi
We should select FSR also to be driven by McBSP, not only FSX. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-15ASoC: soc-compress.c: fix NULL dereferenceQais Yousef
In soc_new_compress() when rtd->dai_link->dynamic is set, we create the pcm substreams with this call: ret = snd_pcm_new_internal(rtd->card->snd_card, new_name, num, 1, 0, &be_pcm); which passes 0 as capture_count leading to be_pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream being NULL, hence when trying to set rtd a few lines below we get an oops. Fix by using rtd->dai_link->dpcm_playback and rtd->dai_link->dpcm_capture as playback_count and capture_count to snd_pcm_new_internal(). Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-15ASoC: rt286: set the same format for dac and adcBard Liao
There is only one I2S I/F, AD/DA path must operate to the same format. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14ASoC: wm8904: fix runtime warningBo Shen
Correct the path name for mux to get rid of the following warning: --->8--- wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTL wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTL wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTR wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTR wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACL wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACL wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACR wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACR ---8<--- Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14ASoC: simple-card: Fix crash in asoc_simple_card_unref()Geert Uytterhoeven
If asoc_simple_card_probe() fails, asoc_simple_card_unref() may be called before dev_set_drvdata(), causing a NULL pointer dereference in asoc_simple_card_unref(): Unable to handle kernel NULL pointer dereference at virtual address 000000d4 ... PC is at asoc_simple_card_unref+0x14/0x48 LR is at asoc_simple_card_probe+0x3d4/0x40c This typically happens because asoc_simple_card_parse_of() returns -EPROBE_DEFER, but other failure modes are possible. devm_snd_soc_register_card()/snd_soc_register_card() may fail either before or after dev_set_drvdata(). Pass a snd_soc_card pointer instead of a platform_device pointer to asoc_simple_card_unref() to fix this. Note that if CONFIG_OF_DYNAMIC=n, of_node_put() is a dummy, and gcc may optimize away the loop over card->dai_link, never actually dereferencing card, and thus avoiding the crash... Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e512e001dafa54e5 ("ASoC: simple-card: Fix the reference count of device nodes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-14ASoC: fsl: imx-wm8962: Set the card owner fieldFabio Estevam
The following crash happens when trying to unload the snd_soc_imx_wm8962 module while playback is active: [ 208.666868] Unable to handle kernel paging request at virtc [ 208.674110] pgd = 80004000 [ 208.676867] [7f06541c] *pgd=4c334811, *pte=00000000, *ppte=00000000 [ 208.683211] Internal error: Oops: 80000007 [#1] SMP ARM [ 208.688445] Modules linked in: snd_soc_wm8962 snd_soc_fsl_ssi snd_soc_imx_audmux imx_pcm_fiq evbug] ... In order to avoid such problem, fill the card owner field as suggested by Lars-Peter Clausen: "But looking at the source it seems that this is a core feature of ALSA and at least for the card module itself it will do the ref-counting when a stream is started/stopped. And we even support setting the owner of a card in ASoC. It's just that pretty much no ASoC card driver bothers to set the owner field in the snd_soc_card struct. So this particular problem can be fixed by updating the imx-wm8962 driver to set the owner field." By doing as suggested, we no longer see the crash when attempting to unload the snd_soc_imx_wm8962 module while playback is active: $ modprobe -r snd_soc_imx_wm8962 modprobe: can't unload module snd_soc_imx_wm8962: Resource temporarily unavailable Reported-by: Jiada Wang <jiada_wang@mentor.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-09ASoC: pcm512x: Fix DSP program selectionPeter Rosin
The DSP programs are listed out of order. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-09ASoC: rt5677: Modify the behavior that updates the PLL parameter.Oder Chiou
The patch modified the behavior that updates the PLL parameter. It set the update bit before the PLL power up. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-08ASoC: fsl_ssi: Fix irq error checkFabio Estevam
Commit 2ffa531078037a0 ("ASoC: fsl_ssi: Fix module unbound") changed the way to retrieve the irq number from irq_of_parse_and_map() to platform_get_irq(), but missed to updated the irq error check accordingly. We should test for negative irq number and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-08ASoC: rockchip: i2s: applys rate symmetry for CPU DAIJianqun Xu
This patch applys rate symmetry for rockchip i2s DAI. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07ASoC: Intel: Add NULL checks for the stream pointerJie Yang
We should not send IPC stream commands to FW when the stream is NULL, dereference the NULL pointer may also occur without precheck. Here add NULL pointer checks for these stream APIs. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07ALSA: fireworks: fix an endianness bug for transaction lengthTakashi Sakamoto
Although the 't->length' is a big-endian value, it's used without any conversion. This means that the driver always uses 'length' parameter. Fixes: 555e8a8f7f14("ALSA: fireworks: Add command/response functionality into hwdep interface") Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-07ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hdaAaron Plattner
Vendor ID 0x10de0072 is used by a yet-to-be-named GPU chip. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-01-06ASoC: wm8960: Fix capture sample rate from 11250 to 11025Zidan Wang
wm8960 codec can't support sample rate 11250, it must be 11025. Signed-off-by: Zidan Wang <b50113@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-05ASoC: adi: Add missing return statement.Andrew Jackson
The probe routine was disabling the clock even if the system was configured successfully. Add a return statement to leave clocks enabled. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: Intel: Don't change offset of block allocator during fixed allocateJie Yang
The offset of block allocator, ba->offset, should not be changed during fixed address allocating, for the caller may treat it as the offset of allocated memory and use it. In the case that we allocate more than 1 blocks, we should make sure this offset is correct. Here introduces a temp allocator for the later continuous allocating. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ASoC: ts3a227e: Check and report jack status at probeCheng-Yi Chiang
ts3a227e does not trigger interrupt to report jack status when system boots from warm reset because ts3a227e's power remains on during warm reset. Read jack status at probe to get current jack status. Note that if system boots from EC reset, then this issue will not happen. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-05ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecsTakashi Iwai
stac_store_hints() does utterly wrong for masking the values for gpio_dir and gpio_data, likely due to copy&paste errors. Fortunately, this feature is used very rarely, so the impact must be really small. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-05ALSA: snd-usb-caiaq: fix stream count checkDaniel Mack
Commit 897c329bc ("ALSA: usb: caiaq: check for cdev->n_streams > 1") introduced a safety check to protect against bogus data provided by devices. However, the n_streams variable is already divided by CHANNELS_PER_STREAM, so the correct check is 'n_streams > 0'. Fix this to un-break support for stereo devices. Signed-off-by: Daniel Mack <daniel@zonque.org> Cc: stable@kernel.org [v3.18+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30time: move the timecounter/cyclecounter code into its own file.Richard Cochran
The timecounter code has almost nothing to do with the clocksource code. Let it live in its own file. This will help isolate the timecounter users from the clocksource users in the source tree. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30Merge tag 'asoc-fix-v3.19-rc2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.19 A few fixes for v3.19, a few driver specifics and one core fix which fixes a boot crash on OMAP if deferred probing kicks in due to attempting to modify static data.
2014-12-30ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registersAurelien BOUIN
The xDC field should have 5 bit width according to Reference Manual. Thus this patch fixes it. Signed-off-by: Aurelien BOUIN <a_bouin@yahoo.fr> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-26ALSA: hda_intel: apply the Seperate stream_tag for SkylakeLibin Yang
The total stream number of Skylake's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-26ALSA: hda_controller: Separate stream_tag for input and output streams.Rafal Redzimski
Implemented separate stream_tag assignment for input and output streams. According to hda specification stream tag must be unique throughout the input streams group, however an output stream might use a stream tag which is already in use by an input stream. This change is necessary to support HW which provides a total of more than 15 stream DMA engines which with legacy implementation causes an overflow on SDxCTL.STRM field (and the whole SDxCTL register) and as a result usage of Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller. Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-24Merge remote-tracking branches 'asoc/fix/dwc', 'asoc/fix/intel', ↵Mark Brown
'asoc/fix/rockchip' and 'asoc/fix/rt5677' into asoc-linus
2014-12-24Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2014-12-24ASoC: rockchip: i2s: fix maxburst of dma data to 4Jianqun Xu
Since RK3288 DMAC's burst length only support max to 4, here set maxburst of playback and capture dma data to 4. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rockchip: i2s: fix error defination of transmit data levelJianqun Xu
According to description about "Transmit Data Level", This bit field controls the level at which a DMA request is made by the transmit logic. It is equal to the watermark level. That is, the dma_tx_req signal is generated when the number of valid data entries in the TXFIFO (TXFIFO0 if CSR=00 TXFIFO1 if CSR=01 TXFIFO2 if CSR=10 TXFIFO3 if CSR=11) is equal to or below this field value. Different to receive data level, transmit data level does not need to "-1". Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: Intel: correct the fixed free block allocationJie Yang
For block span more than 1 section, when allocate it from a free block, we need allocate the remain buffers within the block, and then continue alloc the rest of needed size buffer. Here also make sure this free block is moved from free list to used list, and add it to block_list which may be used for power gating disabling later. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panicFang, Yang A
snd_kcontrol_chip should return snd_soc_component instead of snd_soc_codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: Intel: Fix BYTCR machine driver MODULE_ALIASJarkko Nikula
snd_soc_sst_bytcr_dpcm_rt5640 doesn't autoload because MODULE_ALIAS doesn't match with "bytt100_rt5640" platform device. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: Intel: Fix BYTCR firmware nameJarkko Nikula
BYTCR DSP firmware is in intel/ subdirectory. See linux-firmware.git commit d562a3b63632 ("linux-firmware: add sst audio firmware for baytrail platforms"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Iterate over all channelsAndrew Jackson
The Designware core can be configured with up to four stereo channels. Each stereo channel is individually configured so, when the driver's hw_params call is made, each requested stereo channel has to be programmed. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Ensure FIFOs are flushed to prevent channel swapAndrew Jackson
Flush the FIFOs when the stream is prepared for use. This avoids an inadvertent swapping of the left/right channels if the FIFOs are not empty at startup. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-22ASoC: Intel: Add I2C dependency to two new machinesJarkko Nikula
Fix following build error when CONFIG_I2C is not enabled: sound/soc/codecs/rt5640.c:2252:1: warning: data definition has no type or storage class module_i2c_driver(rt5640_i2c_driver); ^ sound/soc/codecs/rt5640.c:2252:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int] sound/soc/codecs/rt5640.c:2252:1: warning: parameter names (without types) in function declaration sound/soc/codecs/rt5640.c:2241:26: warning: ‘rt5640_i2c_driver’ defined but not used [-Wunused-variable] static struct i2c_driver rt5640_i2c_driver = { ^ cc1: some warnings being treated as errors Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-20Merge tag 'pm-config-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CONFIG_PM_RUNTIME elimination from Rafael Wysocki: "This removes the last few uses of CONFIG_PM_RUNTIME introduced recently and makes that config option finally go away. CONFIG_PM will be available directly from the menu now and also it will be selected automatically if CONFIG_SUSPEND or CONFIG_HIBERNATION is set" * tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Eliminate CONFIG_PM_RUNTIME tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-19Merge tag 'sound-fix-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few fixes that have landed after the previous pull request. All are driver specific fixes including: - error/int value fixes in OXFW, - Intel Skylake HD-audio HDMI codec support, - Additional HD-audio Realtek codecs and AD1986A codec fixes/quirks, - a few more DSD support and a quirk for Arcam rPAC in usb-audio, - a typo fix for Scarlett 6i6, - fixes for new ASIHPI firmware, - ASoC Exynos7 cleanups, - Intel ACPI support, and - a fix for PCM512 register cache sync" * tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC ALSA: hda/realtek - New codec support for ALC298 ALSA: asihpi: update to HPI version 4.14 ALSA: asihpi: increase tuner pad cache size ALSA: asihpi: relax firmware version check ALSA: usb-audio: Fix Scarlett 6i6 initialization typo ALSA: hda - Add quirk for Packard Bell EasyNote MX65 ALSA: usb-audio: add native DSD support for Matrix Audio DACs ALSA: hda/realtek - New codec support for ALC256 ALSA: hda/realtek - Add new Dell desktop for ALC3234 headset mode ASoC: Intel: fix possible acpi enumeration panic ALSA: hda/hdmi - apply Haswell fix-ups to Skylake display codec ASoC: Intel: fix return value check in sst_acpi_probe() ALSA: hda - Make add_stereo_mix_input flag tristate ALSA: hda - Create capture source ctls when stereo mix input is added ALSA: hda - Fix typos in snd_hda_get_int_hint() kerneldoc comments ALSA: hda - add codec ID for Skylake display audio codec ALSA: oxfw: some signedness bugs ALSA: oxfw: fix detect_loud_models() return value ASoC: rt5677: add REGMAP_I2C and REGMAP_IRQ dependency ...
2014-12-19sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
The sst-haswell-pcm driver is a new user of CONFIG_PM_RUNTIME. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in sound/soc/intel/sst-haswell-pcm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 12:47:19 +0000