summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2017-04-12ASoC: Intel: Skylake: Add support for deferred DSP module bindJeeja KP
Module at the end of DSP pipeline that needs to be connected to a module in another pipeline are represented as a PGA(leaf node) and in PGA event handler these modules are bound/unbounded. Modules other than PGA leaf can be connected directly or via switch to a module in another pipeline. Example: reference path. To support the deferred DSP module bind, following changes are done: o When the path is enabled, the destination module that needs to be bound may not be initialized. If the module is not initialized, add these modules in a deferred bind list. o When the destination module is initialized, check for these modules in deferred bind list. If found, bind them. o When the destination module is deleted, Unbind the modules. o When the source module is deleted, remove the entry from the deferred bind list. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-30ASoC: Intel: bxtn: fix spelling mistake: "Timout" -> "Timeout"Colin Ian King
trivial fix to spelling mistake in dev_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Fix module state after unbind and deleteJeeja KP
When DSP module is unbound, the module state needs to be in INIT_DONE state instead of UNINT. Also the state needs to be set to UNINIT after module is deleted from DSP pipeline. So, set the module state to INIT_DONE after unbind and then UNINIT after module is deleted. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Fix DMA position reporting for capture streamHardik T Shah
As per hardware recommendation, for every capture stream completion following operations need to be done in order to reflect the actual data that is received in position buffer. 1. Wait for 20us before reading the DMA position in buffer once the interrupt is generated for stream completion. 2. Read any of the register to flush the DMA position value. This is dummy read operation. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Rearrangement of code to cleanup SKL SST libraryJeeja KP
Skylake driver topology header/driver structure is referenced and used in SST library which creates circular dependency. Hence the rearrangement. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: remove hard coded ACPI pathVinod Koul
We should not hard code the ACPI path to get acpi_handle. Instead use ACPI_HANDLE macro to do the job. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Remove redundant vmixer handlerVinod Koul
Initially vmixer and mixer widget handlers were bit different, but over time they became same so remove the duplicate code. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Don't unload module when in useVinod Koul
A module may have multiple instances in DSP, so unload only when usage count is zero. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Add 16-bit constraint to FE bxt_rt298 machineG Kranthi
Add constraint to FE to restrict sample format to 16-bit for bxt_rt298 machine Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: hdac_hdmi: Update sig_bits based on converter capabilityJeeja KP
When creating the codec dai, use sig_bits to update the max bps based on the codec capability. So both the link DMA and codec format will be calculated based on DAI sig_bits. So update the sig_bits with converter capability and use the sig_bits for HDA format calculation. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Use the sig_bits to define dai bps capabilityJeeja KP
For calculating the HDA DMA format, use the max_bps supported by the DAI caps instead of fixing it to 32/24. For host DMA the Max bps support is 32, but in case of link DMA, this depends on the codec capability. So use the sig_bits to define the bps supported by dai. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29Merge branch 'topic/hda' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2017-03-29ALSA: hda: Fix LLCH register readB, Jayachandran
LLCH is a 16 bit register. Use readw instead of readl API. Signed-off-by: B, Jayachandran <jayachandran.b@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27ASoC: intel: remove unused variable data and associated codeColin Ian King
The variable 'data' is assigned null and never re-assigned. There is also a redundant check for data being non-null which is always false, so remove this and the variable data and dma_addr as they are not used once the dead code has been removed. Detected with CoverityScan, CID#1324015 ("'Constant' variable gaurds dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27ASoC: intel: Don't print FW version repeatedlyTakashi Iwai
Intel SST driver spews an info message "FW Versoin xxxx" at each time the device gets initialized. Since it's triggered at each PM (or even runtime PM), it appears so ofetn, and rather becomes annoying than useful. This patch suppresses the superfluous messages by checking the currently loaded FW version with the previously loaded one. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21ASoC: Intel: Update bxt_da7219_max98357a to add a newHarsha Priya
This patch adds a platform clock widget to turn off the clock only when both headset capture and headset playback are not in use. This removes turning off the clock in hw_free so that the clock is on when either capture or playback of headset is in progress. Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix parameter overwrite for KPB ModuleDharageswari R
KPB module default parameter were overwritten by the dynamic instance id once use case is executed. This will cause module crash from subsequent execution of use case as the updated parameters are used. So instead of over writing the default parameter, make a copy and update the module parameter and use this in IPC message. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Kranthikumar, GudishaX <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix module load when module size > DMA buffer sizeJeeja KP
When module size > DMA buffer size, driver copies first chunk and waits for the BDL complete interrupt. BDL complete interrupt never occurs and wait time expires as module load IPC is not send to start the DMA from DSP. To fix the above issue need to follow the below steps: 1. After copying the first chunk, send the module load IPC to start the DMA. 2. Wait for the BDL interrupt. Once interrupt is received, copy the next chunk. 3. Continue step 2 till all bytes are copied. 4. When all the bytes are copied (bytes_left = 0), wait for module load IPC response 5. Handled module load IPC response messages, check the load module IPC response and wake up the thread to complete module load. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Remove get dsp_ops in cleanup routineG Kranthi
dsp ops is already set in init, so use this in cleanup routine instead of again retrieving it. Also constify struct skl_dsp_ops. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Disable notifications at boot after DSP FW initG Kranthi
DSP firmware sends notification every 1ms, which is disabled in runtime suspend. But if a system has no runtime pm, we keep getting notification, so disable after FW init as well. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Remove BE prepare opsJeeja KP
Remove BE prepare ops which enables MCLK by default. If MCLK is required to be enabled for any specific platform, it needs to be enabled in the corresponding machine driver. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: bxtn: Reload the firmware in case of D3 failureJeeja KP
If D3 IPC fails or times out, firmware needs to be reloaded as driver continues the reset. So set the fw_load flag to false to reload the firmware in D0. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: bxtn: Update DSP core state in D0Jeeja KP
In system suspend, firmware needs to be re-downloaded as IMR is cleared. When firmware is downloaded in D0, core state is not set to running state causing instability with subsequent D0-D3 cycles. So set the core state correctly during D0 and check the DSP core state if not in reset to set the DSP to D3. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: bxtn: Disable interrupt when DSP is in D3Jeeja KP
When DSP is in D3, no interrupts are expected, so disable interrupt while entering D3. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix not to stop src pipe in pre pmd event handlerGuneshwor Singh
If the widget is a mixin module, just unbind between source and sink and don't stop the source pipe as there can be multiple sinks connected. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipeJeeja KP
DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Enable bytcht_nocodec machine driverPierre-Louis Bossart
Make sure this machine driver is only used if enabled explicitly and if there is no information found in the SSDT. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S accessPierre-Louis Bossart
Add card with dummy codec and DAI to make I2S signals observable. Uses Mic and Speaker pins/widgets to control DAPM Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driverPierre-Louis Bossart
Add entries in HID table and reference to bytcht_da7213 driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: add machine driver for BYT/CHT + DA7213Pierre-Louis Bossart
Add new machine driver, tested with Ard-Audio-DA7212 [1] connected to MinnowBoardMAX Turbot. The MCLK is managed by the codec driver using the "mclk" handle to reuse existing code, but it could just as well be handled by this machine driver. [1] http://www.dialog-semiconductor.com/content/ard-audio-da7212 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Skylake: code cleanup for pin fixup limitationTakashi Sakamoto
As a commit 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") describes, 'fixups is applied to pin 0 only'. On the other hand, the commit left some codes as what they were. This might confuses readers. This commit fixes the issue. This doesn't change driver behaviour at all. Fixes: 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08ASoC: Intel: Skylake: use a helper macro to rounding-up calculationTakashi Sakamoto
In 'include/linux/kernel.h', there's a helper macro to round numerical value. Let's use it. Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bxtn: optimize ROM init retriesJeeja KP
During S3->S0 transition, sometime ROM init fails because of authentication engine loads later than the OS. In this case driver waits for a longer period and then retries the FW download causing huge delay in resume time of audio device. To avoid this, ROM INIT wait time is set to a optimal value and increased the retries for firmware download. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bxtn: Store the FW/Library context at bootJeeja KP
Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bdw-rt5677: Use devm_gpiod_get()Andy Shevchenko
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get() and apply proper flags. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: Skylake: fix spelling mistake: "allocationf" -> "allocation"Colin Ian King
Trivial fix to spelling mistake in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01Merge tag 'sound-fix-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute fixes for rc1: - ALSA core timer and sequencer fixes for bugs spotted by syzkaller - a couple of trivial HD-audio fixups - additional PCI / codec IDs for Intel Geminilake - fixes for CT-XFi DMA mask bugs" * tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix link corruption by event error handling ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming ALSA: ctxfi: Fallback DMA mask to 32bit ALSA: timer: Reject user params with too small ticks ALSA: hda: Add Geminilake HDMI codec ID ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine ALSA: hda - Add Geminilake PCI ID
2017-02-28ALSA: seq: Fix link corruption by event error handlingTakashi Iwai
The sequencer FIFO management has a bug that may lead to a corruption (shortage) of the cell linked list. When a sequencer client faces an error at the event delivery, it tries to put back the dequeued cell. When the first queue was put back, this forgot the tail pointer tracking, and the link will be screwed up. Although there is no memory corruption, the sequencer client may stall forever at exit while flushing the pending FIFO cells in snd_seq_pool_done(), as spotted by syzkaller. This patch addresses the missing tail pointer tracking at snd_seq_fifo_cell_putback(). Also the patch makes sure to clear the cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar mess-up of the FIFO linked list. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 GamingTakashi Iwai
Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like Inspiron 7599 to support its subwoofer speaker. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28ALSA: ctxfi: Fallback DMA mask to 32bitTakashi Iwai
Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit architectures, and bails out if it fails. This causes a problem on some platforms since the 64bit DMA isn't always guaranteed. We should fall back to the default 32bit DMA when 64bit DMA fails. Fixes: 6d74b86d3c0f ("ALSA: ctxfi - Allow 64bit DMA") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28ALSA: timer: Reject user params with too small ticksTakashi Iwai
When a user sets a too small ticks with a fine-grained timer like hrtimer, the kernel tries to fire up the timer irq too frequently. This may lead to the condensed locks, eventually the kernel spinlock lockup with warnings. For avoiding such a situation, we define a lower limit of the resolution, namely 1ms. When the user passes a too small tick value that results in less than that, the kernel returns -EINVAL now. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "overwriten" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: overwrien||overwritten Link: http://lkml.kernel.org/r/1481573103-11329-30-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: deintializing||deinitializing deintialize||deinitialize deintialized||deinitialized Link: http://lkml.kernel.org/r/1481573103-11329-28-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "intialization" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: intialization||initialization The "inintialization" in drivers/acpi/spcr.c is a different pattern but I fixed it as well in this commit. Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "unneded" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: unneded||unneeded Link: http://lkml.kernel.org/r/1481573103-11329-15-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "an union" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: an union||a union Link: http://lkml.kernel.org/r/1481573103-11329-5-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "swith" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: swith||switch swithable||switchable swithed||switched swithing||switching While we are here, fix the "update" to "updates" in the touched hunk in drivers/net/wireless/marvell/mwifiex/wmm.c. Link: http://lkml.kernel.org/r/1481573103-11329-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-23 06:21:11 +0000