summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2016-07-21ASoC: cs53l30: Fix bit shift issue of TDM modeNicolin Chen
The TDM mode using PCM format now has two-bit right shift due to the format configuration in the driver. According to Figure 4-13 in the CS53L30 datasheet, using ASP_SCLK_INV = 0 and SHIFT_LEFT = 1 should be the correct combination to create one-bit right shift for the DSP type A format. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-21ASoC: cs53l30: Fix a bug for TDM slot location validationNicolin Chen
The maximum slot number of CS53L30 is 4 while it should support the situation that's less than 4 channels based on the rx_mask. So when the driver validates the last slot location, it should check the last active slot instead of always the 4th one. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-18ASoC: rockchip: correct the spdif clkChris Zhong
The spdif mclk should be 128 times of sample rate, and there is a internal divider, the real rate of spdif mclk is mclk / (div + 1). Hence, the original driver always get the good frequency for 48000/96000/44100/192000. But for 32000, the mclk is incorrect, it should be 32000*128, but get 48000*128. Do not use the internal divider here, just set all mclk to 128 * sample rate directly. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-18ALSA: usb-audio: Fix quirks code is not calledKazuki Oikawa
snd_usb_{set_interface,ctl_msg}_quirk checks chip->usb_id to need calling a quirks code. But existed code path that not calling dev_set_drvdata in usb_audio_probe. Fixes: 79289e24194a ("ALSA: usb-audio: Refer to chip->usb_id for quirks and MIDI creation") Signed-off-by: Kazuki Oikawa <k@oikw.org> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-17ALSA: echoaudio: purge contradictions between dimension matrix members and ↵Takashi Sakamoto
total number of members Currently, sound device drivers for PCI cards produced by Echo Audio support dimension parameter of element information. But the information has contradictions to the number of members of each element. I guess that this comes from the assumption that these sound cards are used only by 'echomixer' in userspace. But ideally, they should be used with usual ALSA control applications. This commit removes the contradiction. As a result, 'Monitor Mixer Volume' and 'VMixer Volume' elements are shown in usual ALSA control applications such as 'amixer' and 'alsamixer' in series. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-16ASoC: rsrc-card: use asoc_simple_card_parse_card_name()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-16ASoC: rsrc-card: use asoc_simple_dai instead of rsrc_card_daiKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-16ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-16Merge branch 'topic/simple' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rcar
2016-07-16ASoC: simple-card: use asoc_simple_card_parse_card_name()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-16ASoC: simple-card-utils: add asoc_simple_card_parse_card_name()Kuninori Morimoto
simple-card needs to get its card name. This patch makes this method simple style standard. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-16ASoC: simple-card: use asoc_simple_card_parse_dailink_name()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-16ASoC: simple-card-utils: add asoc_simple_card_set_dailink_name()Kuninori Morimoto
Current simple-card is creating dai_link->name / dai_link->stream_name. These are based on CPU + Codec name, or "fe.CPU" or "be.Codec" if it was DPCM. This patch adds asoc_simple_card_set_dailink_name() and set dailink name as common method. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15ASoC: nau8825: drop redundant idiom when converting integer to booleanJohn Hsu
Thanks Mark and Anatol for the discussion. According to the result, the standard C will translate any non-zero value into true, or false otherwise. QUOTE: "6.3.1.2 Boolean type When any scalar value is converted to _Bool, the result is 0 if the value compares equal to 0; otherwise, the result is 1 " Thus, the "!!" idiom is removed. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: nau8825: jack connection decision with different insertion logicJohn Hsu
The original design only covers the jack insertion logic is active low. Add more condition to cover no matter the logic is active low and high. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: mediatek: Add HDMI dai-links to the mt8173-rt5650 machine driverPC Liao
This patch adds HDMI audio output support to the MT8173 RT5650 machine driver. Signed-off-by: PC Liao <pc.liao@mediatek.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: mediatek: mt2701: fix non static symbol warningWei Yongjun
Fixes the following sparse warning: sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:72:5: warning: symbol 'mt2701_dai_num_to_i2s' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Garlic Tseng <garlic.tseng@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Fix conflicting pcm dev drvdata on haswellBen Zhang
soc-core sets the snd_soc_pcm_runtime->dev drvdata to snd_soc_pcm_runtime in soc_post_component_init, and access it in places like codec_reg_show. hsw_pcm_open overwrites the drvdata to point to hsw_pcm_data, confusing soc-core, and causing crashes when cat /sys/devices/pci0000:00/INT3438:00/.../System PCM/codec_reg This patch removes the set in hsw_pcm_open since it's no longer used. commit 7ff9d6714a5c ("ASoC: Intel: Split hsw_pcm_data for playback and capture") already removed all calls to snd_soc_pcm_get_drvdata(rtd). Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: board: add kabylake nau88l25_ssm4567 machine idVinod Koul
Like SKL we have skl_nau88l25_ssm4567 machine for KBL, so add the ID for this machine too. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: board: add kabylake nau88l25_max98357a machine idVinod Koul
Like SKL we have skl_nau88l25_max98357a machine for KBL, so add the ID for this machine too. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Kbl: add kabylake additional machine entriesVinod Koul
Like SKL, we have two more machines for KBL, so add these IDs Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: reduce machine name for skl_nau88l25_max98357aVinod Koul
The platform device id table expects names to be less that 20chars, so truncate the name in skl id table and skl_nau88l25_max98357a machine. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: reduce machine name for skl_nau88l25_ssm4567Vinod Koul
The platform device id table expects names to be less that 20chars, so truncate the name in skl id table and skl_nau88l25_ssm4567 machine. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: Fix fw reload failureSenthilnathan Veppur
FW reload had two issues: - We need to disable the core 0 on when fw fails - Before loading firmware mark boot flag as false This patch fixes these two Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: rt5514-spi: Convert to use devm_* APIAxel Lin
Use devm_* API to simplify the code. This patch also fixes the return value in probe error paths. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-13ALSA: mixart: don't print an unintialized variable on errorDan Carpenter
My static checker complains that "resp" could be unitialized on error when we print its value. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-12ALSA: ak4114: remove redundant check on err being < 0Colin Ian King
snd_ak4114_create checks if the error return err is less than zero or not. This is a redundant check, err can only be < 0 to get to the __fail label, in which case just return err and remove the redundant check (since we never return -EIO). Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-12ALSA: ak4117: remove redundant check on err being < 0Colin Ian King
snd_ak4117_create checks if the error return err is less than zero or not. This is a redundant check, err can only be < 0 to get to the __fail label, in which case just return err and remove the redundant check (since we never return -EIO). Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-12ALSA: hda: add AMD Stoney PCI ID with proper driver capsAwais Belal
This allows the device to correctly show up as ATI HDMI rather than a generic one and allows the driver to use the available caps. Signed-off-by: Awais Belal <awais_belal@mentor.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-12ASoC: ab8500-codec: remove platform data based probeArnd Bergmann
The ux500 platform hasn't used board files for a long time, and nothing defines a ab8500_codec_platform_data, so we can just remove the probing based on that and always use device tree properties directly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12sgtl5000: add Lineout volume controlKalle Kankare
This controls the volume for the line out pins of SGTL5000. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-12sound: oss: Remove useless initialisationAmitoj Kaur Chawla
Remove useless initialisation of variable whose value is reinitialised later. The Coccinelle semantic patch used to make this change is as follows: @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-11ASoC: Intel: board: add kabylake machine idVinod Koul
Kabylake platform is similar to Skylake. So, add machine id. Since same machine driver supports both, add these in id table. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: rt286: set combo jack for KabylakeVinod Koul
Like in Skylake, Kabylake also uses combo jack so add Kabylake to DMI match for combo jack configuration. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: hdac_hdmi: Add device id for KabylakeShreyas NC
Kabylake platform is similar to Skylake. So, add the device id. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: Intel: add kablake device IDsVinod Koul
Kabylake is next generation Intel platform which has similar audio controller to Skylake, so add the ID and driver data in SKL driver. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ALSA: hda - fix use-after-free after module unloadPeter Wu
register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by: Peter Wu <peter@lekensteyn.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-11ASoC: Intel: atom: fix missing breaks that would cause the wrong operation ↵Alan Cox
to execute Now we correctly error an attempt to execute an unsupported operation. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: Intel: Skylake: Initialize module list for BroxtonVinod Koul
The module list was not initialized for Broxton DSP code, so initialize it. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: hdac_hdmi: Fix potential NULL dereferenceVinod Koul
Static checker warns: Pointer 'hlink' returned from call to function 'snd_hdac_ext_bus_get_link' at line may be NULL and will be dereferenced" So we should always check the return of snd_hdac_ext_bus_get_link() before referencing the link pointer Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ASoC: intel: Fix sst-dsp dependency on dw stuffTakashi Iwai
The recent commit [a92ea59b74e2: ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in] introduced more strict kconfig dependency (depends on DW_DMAC_CORE=y) for avoiding the build failures due to dependency messes in intel-sst. This makes, however, it impossible to use this driver with the modularized systems, i.e. typically on Linux distros. The problem addressed in the commit above is that sst_dsp_new() and sst_dsp_free() includes the firmware init / finish that call dw_*() functions. Thus building it as built-in with DW_DMAC_CORE module results in the missing symbols. However, these sst_dsp functions are basically called only from the drivers that depend on DW_DMAC_CORE already. That is, once when these functions are split out, the rest can be independent from dw stuff. This patch attempts to solve the issue by the following: - Split sst-dsp stuff into two modules: snd-soc-sst-dsp and snd-soc-sst-firmware. - Move sst_dsp_new() and sst_dsp_free() to the latter module so that the former module can be independent from DW_DMAC_CORE. - Add a new kconfig SND_SOC_INTEL_SST_FIRMWARE to select the latter module by machine drivers. One only remaining pitfall is that each machine driver has to select SND_SOC_INTEL_SST_FIRMWARE carefully depending on DW_DMAC_CORE. This can't be done cleanly due to the restriction of the current kbuild. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=988117 Fixes: a92ea59b74e2 ('ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: atom: statify cht_quirkVinod Koul
Sparse rightly warns: sound/soc/intel/atom/sst/sst_acpi.c:353:22: warning: symbol 'cht_quirk' was not declared. Should it be static? So statify this Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: cht: fix uninit variable warningVinod Koul
Kbuild bot reports that we might use dai_index uninitialized. sound/soc/intel/boards/cht_bsw_rt5645.c:391:37: warning: 'dai_index' may be used uninitialized in this function [-Wmaybe-uninitialized] Since it is theoretically possible, set it while initializing. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Skylake: Fix to use the actual size for TLV controlDharageswari R
DSP expects the actual length of parameters that is set through TLV to be passed in large config set, so pass the actual size received in tlv_control_set() instead of max size. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: rt5645: Add ACPI ID 10EC5640Vinod Koul
Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it. Also add DMI quirk for jack detection. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 [Jack detection] Suggested-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Add surface3 entry in CHT-RT5645 machineVinod Koul
Surface3 device is a CHT machine, so add entry for it. Also update the HID from BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Atom: Add quirk for Surface 3Vinod Koul
Surface 3 is CHT based device which shows up with RT5645 codec. But the BIOS reports ACPI ID as 5640! To solve this, add a DMI overide for cht-5640 machine. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ALSA: pcm: Free chmap at PCM free callback, tooTakashi Iwai
The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by: Laxminath Kasam <b_lkasam@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-08ALSA: ctl: Stop notification after disconnectionTakashi Iwai
snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-08ALSA: hda/realtek - add new pin definition in alc225 pin quirk tableHui Wang
We have some Dell laptops which can't detect headset mic, the machines use the codec ALC225, they have some new pin configuration values, after adding them in the alc225 pin quirk table, they work well. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 16:47:19 +0000