summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2014-12-08Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2014-12-08Merge remote-tracking branch 'asoc/topic/cache' into asoc-nextMark Brown
2014-12-08Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/davinci', ↵Mark Brown
'asoc/fix/max98090', 'asoc/fix/sigmadsp' and 'asoc/fix/tlv320aic31xx' into asoc-linus
2014-12-08Merge remote-tracking branch 'asoc/fix/pcm' into asoc-linusMark Brown
2014-12-08ASoC: wm5102: Initialize dac_comp_lock mutexMark Brown
Commit d74bcaaeb6682 (ASoC: wm5102: Move ultrasonic response settings lock to the driver level) created a driver local mutex for protecting the ultrasonic response settings but neglected to initialize that mutex, causing loud complaints from lockep and potential runtime failures. Fix this by initializing the mutex. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-12-08ASoC: samsung: Fix non-DT use of I2S controllerMark Brown
The changes in commit a5a56871f804e (ASoC: samsung: add support for exynos7 I2S controller) introduce a new variant_regs structure in the driver data which is now mandatory for accessing registers. Unfortunately this is only hooked up for DT platforms so non-DT platforms like my primary development platform for audio are broken by this change and crash on boot. Since the only non-DT user of these device is s3c64xx fix this by making the standard samsung-i2s device be of type I2Sv3 and add a new I2Sv4 name to the platform data section, currently using the I2Sv5 information which should be about right. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-08Merge branch 'for-next' into for-linusTakashi Iwai
2014-12-07ASoC: rsnd: rename SSI function name of PIOKuninori Morimoto
Current R-Car sound SSI PIO/DMA mode are using interrupt. it is no longer "xxx_pio_xxx", rename it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-07ASoC: rsnd: add salvage support for under/over flow error on SSIKuninori Morimoto
L/R channel will be switched if under/over flow error happen on Renesas R-Car sound device by the HW bugs. Then, HW restart is required for salvage. This patch add salvage support for SSI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-06ALSA: usb-audio: Don't resubmit pending URBs at MIDI error recoveryTakashi Iwai
In snd_usbmidi_error_timer(), the driver tries to resubmit MIDI input URBs to reactivate the MIDI stream, but this causes the error when some of URBs are still pending like: WARNING: CPU: 0 PID: 0 at ../drivers/usb/core/urb.c:339 usb_submit_urb+0x5f/0x70() URB ef705c40 submitted while active CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.6-2-desktop #1 Hardware name: FOXCONN TPS01/TPS01, BIOS 080015 03/23/2010 c0984bfa f4009ed4 c078deaf f4009ee4 c024c884 c09a135c f4009f00 00000000 c0984bfa 00000153 c061ac4f c061ac4f 00000009 00000001 ef705c40 e854d1c0 f4009eec c024c8d3 00000009 f4009ee4 c09a135c f4009f00 f4009f04 c061ac4f Call Trace: [<c0205df6>] try_stack_unwind+0x156/0x170 [<c020482a>] dump_trace+0x5a/0x1b0 [<c0205e56>] show_trace_log_lvl+0x46/0x50 [<c02049d1>] show_stack_log_lvl+0x51/0xe0 [<c0205eb7>] show_stack+0x27/0x50 [<c078deaf>] dump_stack+0x45/0x65 [<c024c884>] warn_slowpath_common+0x84/0xa0 [<c024c8d3>] warn_slowpath_fmt+0x33/0x40 [<c061ac4f>] usb_submit_urb+0x5f/0x70 [<f7974104>] snd_usbmidi_submit_urb+0x14/0x60 [snd_usbmidi_lib] [<f797483a>] snd_usbmidi_error_timer+0x6a/0xa0 [snd_usbmidi_lib] [<c02570c0>] call_timer_fn+0x30/0x130 [<c0257442>] run_timer_softirq+0x1c2/0x260 [<c0251493>] __do_softirq+0xc3/0x270 [<c0204732>] do_softirq_own_stack+0x22/0x30 [<c025186d>] irq_exit+0x8d/0xa0 [<c0795228>] smp_apic_timer_interrupt+0x38/0x50 [<c0794a3c>] apic_timer_interrupt+0x34/0x3c [<c0673d9e>] cpuidle_enter_state+0x3e/0xd0 [<c028bb8d>] cpu_idle_loop+0x29d/0x3e0 [<c028bd23>] cpu_startup_entry+0x53/0x60 [<c0bfac1e>] start_kernel+0x415/0x41a For avoiding these errors, check the pending URBs and skip resubmitting such ones. Reported-and-tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-06ASoC: samsung: Fix error handling for clock lookupMark Brown
Return the error code we got from clk_get() and check to make sure that clk_prepare_enable() worked. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-05ALSA: atmel_abdac: Add missing clock prepareAlexander Stein
Clocks must be prepared before enabling them. Do this in one step. Replace clk_enable with clk_prepare_enable and clk_disable with clk_disable_unprepare. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-05ALSA: sound/atmel/ac97c.c: Add missing clock prepareAlexander Stein
Clocks must be prepared before enabling them. Do this in one step. Replace clk_enable with clk_prepare_enable and clk_disable with clk_disable_unprepare. This fixes the following warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:895 __clk_enable+0x24/0x9c() Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.0-rc7+ #245 [<c000dce8>] (unwind_backtrace) from [<c000bcf0>] (show_stack+0x10/0x14) [<c000bcf0>] (show_stack) from [<c001664c>] (warn_slowpath_common+0x60/0x80) [<c001664c>] (warn_slowpath_common) from [<c00166fc>] (warn_slowpath_null+0x18/0x20) [<c00166fc>] (warn_slowpath_null) from [<c02fd7ac>] (__clk_enable+0x24/0x9c) [<c02fd7ac>] (__clk_enable) from [<c02fdbb4>] (clk_enable+0x18/0x2c) [<c02fdbb4>] (clk_enable) from [<c0322688>] (atmel_ac97c_probe+0x154/0x694) [<c0322688>] (atmel_ac97c_probe) from [<c0235e08>] (platform_drv_probe+0x48/0x94) [<c0235e08>] (platform_drv_probe) from [<c02345f8>] (driver_probe_device+0x138/0x350) [<c02345f8>] (driver_probe_device) from [<c02348bc>] (__driver_attach+0x68/0x8c) [<c02348bc>] (__driver_attach) from [<c0232bd0>] (bus_for_each_dev+0x70/0x84) [<c0232bd0>] (bus_for_each_dev) from [<c0233cd8>] (bus_add_driver+0xfc/0x1f8) [<c0233cd8>] (bus_add_driver) from [<c0234f0c>] (driver_register+0x9c/0xe0) [<c0234f0c>] (driver_register) from [<c0008ac4>] (do_one_initcall+0x110/0x1c8) [<c0008ac4>] (do_one_initcall) from [<c053cd58>] (kernel_init_freeable+0xf8/0x1b8) [<c053cd58>] (kernel_init_freeable) from [<c03c0414>] (kernel_init+0x8/0xe4) [<c03c0414>] (kernel_init) from [<c00096d0>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa201 ]--- atmel_ac97c fffa0000.sound: AC'97 0 does not respond - RESET atmel_ac97c fffa0000.sound: AC'97 0 access is not valid [0xffffffff], removing mixer. ------------[ cut here ]------------ Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-05Merge tag 'sound-3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixlet from Takashi Iwai: "Just one commit for adding a copule of HD-audio quirk entries" * tag 'sound-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add headset Mic support for new Dell machine
2014-12-05ALSA: hda - Fix built-in mic at resume on Lenovo Ideapad S210Takashi Iwai
The built-in mic boost volume gets almost muted after suspend/resume on Lenovo Ideapad S210. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88121 Reported-and-tested-by: Roman Kagan <rkagan@mail.ru> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-05ALSA: sound/atmel/ac97c.c: Fix device index for pcmAlexander Stein
chip->pdev->id is -1 by default. This is an invalid index resulting in device file names like /dev/snd/pcmC0D-1p. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-05ASoC: rt5677: make volume TLV closer to realityDylan Reid
The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Update the masks to reflect that these are registers have the LSB ignored. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04ASoC: fsl_ssi: fix error path in probeJiada Wang
SSI component isn't unregistered if fsl_ssi_debugfs_create() fails in probe phase. To fix it, this commit replaces label error_asoc_register with error_irq. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04ASoC: fsl_ssi: Fix module unboundFabio Estevam
Trying to remove the snd-soc-fsl-ssi module leads to the following warning: [ 31.515336] ------------[ cut here ]------------ [ 31.520091] WARNING: CPU: 2 PID: 434 at fs/proc/generic.c:521 remove_proc_entry+0x14c/0x16c() [ 31.528708] remove_proc_entry: removing non-empty directory 'irq/79', leaking at least '202c000.ss' [ 31.537911] Modules linked in: snd_soc_wm8962 snd_soc_imx_wm8962 snd_soc_fsl_ssi(-) evbug [ 31.546249] CPU: 2 PID: 434 Comm: rmmod Not tainted 3.18.0-rc6-00028-g3314bf6-dirty #1 [ 31.554235] Backtrace: [ 31.556816] [<80011ea8>] (dump_backtrace) from [<80012044>] (show_stack+0x18/0x1c) [ 31.564416] r6:80142c88 r5:00000000 r4:00000000 r3:00000000 [ 31.570267] [<8001202c>] (show_stack) from [<806980ec>] (dump_stack+0x88/0xa4) [ 31.577588] [<80698064>] (dump_stack) from [<80029d78>] (warn_slowpath_common+0x70/0x94) [ 31.585711] r5:00000009 r4:bb61fd90 [ 31.589423] [<80029d08>] (warn_slowpath_common) from [<80029e40>] (warn_slowpath_fmt+0x38/0x40) [ 31.598187] r8:bb61fdfe r7:be05d76d r6:be05d9a8 r5:00000002 r4:be05d700 [ 31.605054] [<80029e0c>] (warn_slowpath_fmt) from [<80142c88>] (remove_proc_entry+0x14c/0x16c) [ 31.613709] r3:806a79c0 r2:808229a0 [ 31.617371] [<80142b3c>] (remove_proc_entry) from [<80070380>] (unregister_irq_proc+0x94/0xb8) [ 31.625989] r10:00000000 r8:8000ede4 r7:80955f2c r6:0000004f r5:8118e738 r4:be00af00 [ 31.633952] [<800702ec>] (unregister_irq_proc) from [<80069dac>] (free_desc+0x2c/0x64) [ 31.641898] r6:0000004f r5:80955f38 r4:be00af00 [ 31.646604] [<80069d80>] (free_desc) from [<80069e68>] (irq_free_descs+0x4c/0x8c) [ 31.654092] r7:00000081 r6:00000001 r5:0000004f r4:00000001 [ 31.659863] [<80069e1c>] (irq_free_descs) from [<8006fc3c>] (irq_dispose_mapping+0x40/0x5c) [ 31.668247] r6:be17b844 r5:be17b800 r4:0000004f r3:802c5ec0 [ 31.673998] [<8006fbfc>] (irq_dispose_mapping) from [<7f004ea4>] (fsl_ssi_remove+0x58/0x70 [snd_so) [ 31.683948] r4:bb5bba10 r3:00000001 [ 31.687618] [<7f004e4c>] (fsl_ssi_remove [snd_soc_fsl_ssi]) from [<803720a0>] (platform_drv_remove) [ 31.697564] r5:7f0064f8 r4:be17b810 [ 31.701195] [<80372080>] (platform_drv_remove) from [<80370494>] (__device_release_driver+0x78/0xc) [ 31.710361] r5:7f0064f8 r4:be17b810 [ 31.713987] [<8037041c>] (__device_release_driver) from [<80370d20>] (driver_detach+0xbc/0xc0) [ 31.722631] r5:7f0064f8 r4:be17b810 [ 31.726259] [<80370c64>] (driver_detach) from [<80370304>] (bus_remove_driver+0x54/0x98) [ 31.734382] r6:00000800 r5:00000000 r4:7f0064f8 r3:bb67f500 [ 31.740149] [<803702b0>] (bus_remove_driver) from [<80371398>] (driver_unregister+0x30/0x50) [ 31.748617] r4:7f0064f8 r3:bd9f7080 [ 31.752245] [<80371368>] (driver_unregister) from [<80371f3c>] (platform_driver_unregister+0x14/0x) [ 31.761498] r4:7f00655c r3:7f005a70 [ 31.765130] [<80371f28>] (platform_driver_unregister) from [<7f005a84>] (fsl_ssi_driver_exit+0x14/) [ 31.776147] [<7f005a70>] (fsl_ssi_driver_exit [snd_soc_fsl_ssi]) from [<8008ed80>] (SyS_delete_mod) [ 31.786553] [<8008ec64>] (SyS_delete_module) from [<8000ec20>] (ret_fast_syscall+0x0/0x48) [ 31.794824] r6:00c46d18 r5:00000800 r4:00c46d18 [ 31.799530] ---[ end trace 954e8a3a15379e52 ]--- The cause of problem and solution are well explained by Lars-Peter: "The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping." Tested on a imx6q-sabresd board. Reported-by: Jiada Wang <jiada_wang@mentor.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04ASoC: soc-pcm: do not hw_free BE if it's still usedQiao Zhou
Do not free BE hw if it's still used by other FE during dpcm runtime shutdown. Otherwise the BE runtime state will be STATE_HW_FREE and won't be updated to STATE_CLOSE when shutdown ends, because BE dai shutdown function won't close pcm when detecting BE is still under use. With STATE_HW_FREE, BE can't be triggered start again. This corner case can easily appear when one BE is used by two FE, without this patch "ASoC: dpcm: Fix race between FE/BE updates and trigger"(ea9d0d771fcd32cd56070819749477d511ec9117). One FE tries to shutdown but it's raced against xrun on another FE. It improves the be dai hw_free logic. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04ASoC: Augment existing card DAPM routes in snd_soc_of_parse_audio_routingPeter Rosin
If a snd_soc_card has any DAPM routes when it calls snd_soc_of_parse_audio_routing, those are clobbered without this change. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ALSA: ctxfi: Neaten get_daio_rscJoe Perches
Move the pointer declarations into the blocks that use them. Neaten the kfree calls when the _init functions fail. Trivially reduces object size (defconfig x86-64) $ size sound/pci/ctxfi/ctdaio.o.* text data bss dec hex filename 5287 224 0 5511 1587 sound/pci/ctxfi/ctdaio.o.new 5319 224 0 5543 15a7 sound/pci/ctxfi/ctdaio.o.old Signed-off-by: Joe Perches <joe@perches.com> Noticed-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-03ASoC: rsnd: remove un-necessary parameter from rsnd_src_start/stop()Kuninori Morimoto
rsnd_src_start/stop() requests struct rsnd_dai as parameter. but, it is not used, and become more complex in L/R error handling. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: share SSI starting method between PIO/DMA modeKuninori Morimoto
Basically, SSI starting method is same between PIO/DMA mode. Let's share it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: set SRC_ROUTE_MODE0 on each rsnd_src_set_convert_rate()Kuninori Morimoto
Current src.c sets SRC_ROUTE_MODE0 on rsnd_src_start(), but, set it in rsnd_src_set_convert_rate() is natural. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: initialize SRC on rsnd_src_init()Kuninori Morimoto
Current src initialize SRC on rsnd_src_set_convert_rate() but, it should be done on rsnd_src_init(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: use rsnd_src_convert_rate() once on rsnd_src_set_convert_rate_gen2()Kuninori Morimoto
using many rsnd_src_convert_rate() is not readable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: tidyup rsnd_io_to_runtime() macroKuninori Morimoto
Avoid NULL pointer access Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: move snd_kcontrol_new fucntions to core.cKuninori Morimoto
Current DVC is using snd_kcontrol_new functions, but, SRC will need same method. Move common functions to core.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: show master clock rate when ADG probeKuninori Morimoto
master clock rate is useful information for debug. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: synchronize SSI start/stop sequence between PIO/DMA modeKuninori Morimoto
Current SSI start/stop sequence is different between PIO/DMA mode, but, almost all are same. this patch synchronize it. It will be shared in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: clear status register when HW startKuninori Morimoto
Let's clear SSI status when HW start Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: care SSIWSR register in rsnd_ssi_hw_start()Kuninori Morimoto
Current SSI is careing SSIWSR which controls WS continue mode when DMA mode, but, it should be cared when PIO mode too. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: tidyup SSI interrupt enable/disable methodKuninori Morimoto
Current SSI doesn't care interrupt "disable" method. And, it is used when PIO mode only at this point. SSI interrupt will be used for sound R/L issue workaround when DMA mode too. This patch tidyup SSI interrupt enable/disable method. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: tidyup PIO/DMA mode settings methodKuninori Morimoto
Current ssi.c has .cr_etc which is used for SSICR's etc settings. but, it is used as PIO/DMA switching purpose now. This patch tidyup this method. This is prepare for under/over run issue handling Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: rsnd_src_ssiu_stop() stops SSIU compulsorilyKuninori Morimoto
rsnd_src_ssiu_stop() is used to stop SSIU, but it shouldn't depend on whether it is using SSIU. This patch stops SSIU compulsorily. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: add callback status check methodKuninori Morimoto
R-Car sound can use SSI/SRC/DVC modules, and these are controlled as rsnd_mod in rsnd driver. These rsnd_mod has each own function as callback. Basically these callback function has pair like probe/remove, start/stop, etc. And, these functions are called by order to each stage like below. 1. src->probe 2. ssi->probe 3. dvc->probe 4. src->start 5. ssi->start 6. dvc->start 7. src->stop 8. ssi->stop 9. dvc->stop 10. src->remove 11. ssi->remove 12. dvc->remove But, current rsnd driver doesn't care about its status which indicates which function is called. For example, if 5) returns error, 6) is not called. In such case, 9) should not be called. This patch care about each modules status. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: rsnd: add .fallback callbackKuninori Morimoto
Current R-Car sound has PIO fallback support if it couldn't use DMA. This fallback is done in .remove callback, but, it should have .fallback callback. Otherwise, normal .remove callback will have strange behavior. This patch adds .fallback callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: mop500: Deletion of unnecessary checks before the function call ↵Markus Elfring
"of_node_put" The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: fsi: Deletion of unnecessary checks before the function call "clk_disable"Markus Elfring
The clk_disable() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ASoC: dwc: Allocate resources with devm_ioremap_resourceAndrew Jackson
Prepare for the introduction of device-tree support by re-ordering some of the allocations and using devm_iomap_resource to simplify IO mapping. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03ALSA: hda - Drop AZX_DCAPS_ALIGN_BUFSIZETakashi Iwai
We introduced AZX_DCAPS_ALIGN_BUFSIZE to explicity show that the controller needs the alignment, with a slight hope that the buffer size alignment will be disabled as default in future. But the reality tells that most chips need the buffer size alignment, and it'll be likely enabled in future, too. This patch drops AZX_DCAPS_ALIGN_BUFSIZE to give back one more precious DCAPS bit for future use. At the same time, rename AZX_DCAPS_BUFSIZE with AZX_DCAPS_NO_ALIGN_BUFSIZE for avoiding confusion. AZX_DCAPS_ALIGN_BUFSIZE are still kept (but commented out) in each DCAPS presets for a purpose as markers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-03ALSA: hda - Define the DCAPS preset for the old Intel chipsetsTakashi Iwai
Just for improving readability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-03Merge tag 'v3.18-rc7' into for-nextTakashi Iwai
... for allowing more cleanups of hda_intel.c driver-caps where both upstream and for-next contain the changes.
2014-12-03ALSA: i2sbus: Deletion of unnecessary checks before the function call ↵Markus Elfring
"release_and_free_resource" The release_and_free_resource() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02ALSA: trident: Deletion of a check before snd_util_memhdr_free()Markus Elfring
The snd_util_memhdr_free() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02ALSA: echoaudio: Deletion of a check before release_and_free_resource()Markus Elfring
The release_and_free_resource() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02ALSA: asihpi: Deletion of an unnecessary check before the function call "vfree"Markus Elfring
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02ASoC: Kconfig: remove not used SND_AT91_SOC_AFEB9260 optionNicolas Ferre
Now that the driver snd-soc-afeb9260.c is deleted, remove its Kconfig option. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-02ALSA: hda/realtek - Add headset Mic support for new Dell machineKailang Yang
Dell has new machines. It supports headset Mic and Headphone Mic. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 17:54:41 +0000