| Age | Commit message (Collapse) | Author |
|---|
|
With this patch, the dma buffer size is fetched from topology binary. This
buffer size is applicable for gateway copier modules.
Now that we can configure DSP dma buffer size, the device can support deep
buffer playback. DSP fetches large buffer and can result fewer wakes,
which helps in power reduction.
Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assignment if ->probe() fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
GPIO ACPI mapping table is defined on platform basis. Codec driver
shouldn't have known what platform is using it.
Make codec driver more generic by moving platform code to where it
belongs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I2C devices are enumerated by IDs, and not by instances.
Make it clear by using proper module device table for ACPI case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Intel SST driver allocates lots of pages at suspend for saving the
firmware states, and this may occasionally lead to the allocation
error due to the high order, ending up with the suspend failure.
Use kvzalloc() so that it can fall back to vmalloc() gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds Kabylake I2S machine driver which uses codecs
MAX98927 as speakers and RT5514 as dmic on ssp0 and
RT5663 as headset on ssp1.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
|
|
C99 style struct initialization helps in readability as well as
initialization of variables not specified as NULL. This patch
changes the struct data definitions in skl.c that were not in c99 style.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
|
|
This patch adds Kabylake I2S machine driver which uses codecs
MAX98927 as speakers and RT5514 as dmic on ssp0 and
RT5663 as headset on ssp1.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Hsin-yu Chao <hychao@google.com>
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
|
|
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Nicolas Porcel <nicolasporcel06@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new machine driver, tested with Weibu F3C MiniPC.
Based heavily on code provided by David Yang @ Everest, and other
machine drivers in the same directory.
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
[drake@endlessm.com: cleanups and modernization]
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a 4-channel dmic fixup so that DMIC copier will receive
4 channel data and further selection will be done by mic-select module.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
User may prefer to select data from particular mics. A mic-select module
in DSP allows this selection.
Create possible enum controls to allow user to select a combination of
mics to capture data from. Based on the user selection, parameters are
generated and passed to mic-select module during init.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mic-select module is a DSP module, which is used to select one or more
input channels.
This patch adds mic-select module type.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In commit 9a075265c6dc ("ASoC: Intel: sst: Remove unused function
sst_restore_shim64()"), we deleted the sst_restore_shim64() since it
was never used. ...but a quick look at the code shows that we should
also be able to remove the sst_save_shim64() function and the
structure members we were storing data in.
Once we delete sst_save_shim64() there are no longer any users of the
'sst_shim_regs64' structure. That means we can delete it completely
and also avoid allocating memory for it. This saves a whopping 136
bytes of devm allocated memory. We also get the nice benefit of
avoiding an error path in the init code.
Note that the saving code that we're removing (and the comments
talking about how important it is to do the save) has been around
since commit 336cfbb05edf ("ASoC: Intel: mrfld- add ACPI module").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds kbl_rt5663_max98927_i2s machine driver entry into machine table
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds Kabylake I2S machine driver which uses codecs
MAX98927 as speakers and RT5663 as headset, configured to ssp0
& ssp1 respectively.
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use quirk function to select the correct machine driver
by checking all codecs instead of only one based on quirk data.
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sst_acpi_mach has a quirk field to handle board specific quirks.
Patch moves quirk call to sst_acpi_find_machine() instead of calling
it in respective driver
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create a helper function to search for a matching machine
based on HID. No functional change
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
C99 style struct initialization helps in readability as well as
initialization of variables not specified as NULL.
Patch modifies all skl machine data.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
C99 style struct initialization helps in readability as well as
initialization of variables not specified as NULL.
Patch modifies all atom machine data.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Module init params are additional data block in the module private data.
Skylake driver doesn't yet have support to parse multiple data blocks if
it appears in private data. Add support for parsing of multiple data
blocks and module init params.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Looks like the function has never been used since it was added by commit
b0d94acd634a ("ASoC: Intel: mrfld - add shim save restore"). Removing it
fixes the following warning when building with clang:
sound/soc/intel/atom/sst/sst.c:360:20: error: unused function
'sst_restore_shim64' [-Werror,-Wunused-function]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Looks like the function has never been used since it was added by commit
17119a465706 ("ASoC: Intel: Add Cherrytrail & Braswell machine driver
cht_bsw_max98090_ti"). Removing it fixes the following warning when
building with clang:
sound/soc/intel/boards/cht_bsw_max98090_ti.c:42:35: error: unused
function 'cht_get_codec_dai' [-Werror,-Wunused-function]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Trivial fix to spelling mistake in dev_err message. Also replace "fail"
with "failure".
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A driver for Intel SST driver for old atom platform includes a variable
which has no external linkage. These functions should have static
qualifier.
This commit adds the qualifier to localize the variable. This issue is
detected by sparse:
sst.c:261:1: warning: symbol 'dev_attr_firmware_version' was not declared. Should it be static?
Cc: Sebastien Guiriec <sebastien.guiriec@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i915 component framework expects the caller to be invoking
snd_hdac_i915_init() from a thread context. Otherwise it results in
lockups on drm side.
So move the registering of component interface and probing of codecs on
this bus to a worker thread.
init_failed in skl structure is not used currently, so renamed to
init_done and used to track the initialization done in worker thread.
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a one-liner change that has a significant impact:
disabling the build of OSS. It's been unmaintained for long time, and
we'd like to drop the stuff. Finally, as the first step, stop the
build. Let's see whether it works without much complaints.
Other than that, there are two small fixes for HD-audio"
* tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
sound: Disable the build of OSS drivers
ALSA: hda: Fix cpu lockup when stopping the cmd dmas
ALSA: hda - Add mute led support for HP EliteBook 840 G3
|
|
OSS drivers are left as badly unmaintained, and now we're facing a
problem to clean up the hackish set_fs() usage in their codes. Since
most of drivers have been covered by ALSA, and the others are dead old
and inactive, let's leave them RIP.
This patch is the first step: disable the build of OSS drivers.
We'll eventually drop the whole codes and clean up later.
Note that sound/oss/dmasound is still kept, since it's a completely
different implementation of OSS, and it doesn't suffer from set_fs()
hack. Moreover, the build of ALSA is disabled on M68K by some reason,
thus disabling it shall result in a regression. This one will be
disabled / removed once when we add the support in ALSA side.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
|
|
Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out
when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq())
causes hard lockup so unlock while waiting using jiffies.
---<-snip->---
<0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
<4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem
<4>[ 1211.603053] irq event stamp: 13366
<4>[ 1211.603053] hardirqs last enabled at (13365):
...
<4>[ 1211.603059] Call Trace:
<4>[ 1211.603059] ? delay_tsc+0x3d/0xc0
<4>[ 1211.603059] __delay+0xa/0x10
<4>[ 1211.603060] __const_udelay+0x31/0x40
<4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core]
<4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel]
<4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core]
<4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec]
<4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel]
<4>[ 1211.603061] pci_pm_suspend+0x71/0x140
<4>[ 1211.603062] dpm_run_callback+0x6f/0x330
<4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0
<4>[ 1211.603062] __device_suspend+0xf9/0x370
<4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60
<4>[ 1211.603063] async_suspend+0x1a/0x90
<4>[ 1211.603063] async_run_entry_fn+0x34/0x160
<4>[ 1211.603063] process_one_work+0x1f4/0x6d0
<4>[ 1211.603063] ? process_one_work+0x16e/0x6d0
<4>[ 1211.603064] worker_thread+0x49/0x4a0
<4>[ 1211.603064] kthread+0x107/0x140
<4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0
<4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40
<4>[ 1211.603065] ret_from_fork+0x2e/0x40
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419
Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set")
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
CC: stable <stable@vger.kernel.org> # 4.7
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
set_memory_* functions have moved to set_memory.h. Switch to this
explicitly.
Link: http://lkml.kernel.org/r/1488920133-27229-14-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This typo is quite common. Fix it and add it to the spelling file so
that checkpatch catches it earlier.
Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Florin Tudorache <florin_tudorache@live.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a relatively calm development cycle, and no scaring changes are
seen in both core and driver sides. Here are some highlights:
ASoC:
- A new API for hooking up jacks more generically and easily
- Card longname is set based on DMI for a unique UCM profile
- Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960,
Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86
systems with DA7213
HD-audio:
- Many new quirks to support headset for various devices (mostly ASUS
ones) as usual
- Support for dual codecs on some Gigabyte mobos and Lenovo laptop
- Improvement on PCM position reporting for Skylake and newer
FireWire:
- New drivers for MOTU and RME Fireface series
- Updates for Digidesign Digi00x and TASCAM series
- Support for tracepoints
Others:
- USB-audio: improved support for quirk_alias option
- Cleanups, constification allover the places"
* tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
ASoC: codec: wm8960: Relax bit clock computation when using PLL
ASoC: codec: wm9860: avoid maybe-uninitialized warning
ASoC: nau8824: leave Class D gain at chip default
ASoC: nau8824: rename controls to match DAPM controls
ASoC: Intel: Skylake: Return negative error code
ASoC: Intel: Skylake: Fix unused variable warning
ASoC: Intel: Skylake: fix uninitialized pointer use
ASoC: sti: Fix error handling if of_clk_get() fails
ASoC: cs4271: configure reset GPIO as output
ASoC: dwc: Disallow building designware_pcm as a module
ALSA: ali5451: fix spelling mistake in "ali_capture_preapre"
ASoC: stm32: add SAI driver
ASoC: stm32: add bindings for SAI
ASoC: Intel: Skylake: Add loadable module support on KBL platform
ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version
ASoC: Intel: Skylake: Register dsp_fw_ops for kabylake
ASoC: Intel: Skylake: Modify arguments to reuse module transfer function
ASoC: Intel: Skylake: Commonize library load
ASoC: Intel: Skylake: Move sst common initialization to a helper function
ASoC: nau8824: new driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.12
A quiet release for the core, but lots of new drivers this time around:
- A new, generalized, API for hooking up jacks which makes it easier to
write generic machine drivers for simple cases.
- Continuing fixes for issues with the x86 CPU drivers.
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
DA7213
|
|
For 4.12 merge.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New drivers:
- add LED support for MT6323 PMIC
- add LED support for Motorola CPCAP PMIC
New features and improvements:
- add LED trigger for all CPUs aggregated which is useful on tiny
boards with more CPU cores than LED pins
- add OF variants of LED registering functions as a preparation for
adding generic support for Device Tree parsing
- dell-led improvements and cleanups, followed by moving it to the
x86 platform driver subsystem which is a more appropriate place for
it
- extend pca9532 Device Tree support by adding the LEDs
'default-state' property
- extend pca963x Device Tree support by adding nxp,inverted-out
property for inverting the polarity of the output
- remove ACPI support for lp3952 since it relied on a non-official
ACPI IDs"
* tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: pca9532: Extend pca9532 device tree support
leds: cpcap: new driver
mfd: cpcap: Add missing include dependencies
leds: lp3952: Use 'if (ret)' pattern
leds: lp3952: Remove ACPI support for lp3952
leds: mt6323: Fix an off by one bug in probe
dt-bindings: leds: Add document bindings for leds-mt6323
leds: Add LED support for MT6323 PMIC
leds: gpio: use OF variant of LED registering function
leds: core: add OF variants of LED registering functions
platform/x86: dell-wmi-led: fix coding style issues
dell-led: move driver to drivers/platform/x86/dell-wmi-led.c
dell-led: remove code related to mic mute LED
platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c
ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func
ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set()
dell-led: remove GUID check from dell_micmute_led_set()
leds/trigger/cpu: Add LED trigger for all CPUs aggregated
|
|
'asoc/topic/zte-tdm' into asoc-next
|
|
'asoc/topic/unregister', 'asoc/topic/ux500', 'asoc/topic/wm5100' and 'asoc/topic/wm8903' into asoc-next
|
|
'asoc/topic/topology', 'asoc/topic/twl6040' and 'asoc/topic/txx9' into asoc-next
|
|
'asoc/topic/stm', 'asoc/topic/sunxi' and 'asoc/topic/tas2552' into asoc-next
|
|
'asoc/topic/simple', 'asoc/topic/sirf' and 'asoc/topic/ssm4567' into asoc-next
|
|
'asoc/topic/rt5645' and 'asoc/topic/rt5677' into asoc-next
|
|
'asoc/topic/pxa' and 'asoc/topic/qcom' into asoc-next
|
