summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2010-07-19ALSA: echoaudio: check kmalloc() resultKulikov Vasiliy
If kmalloc() fails exit with -ENOMEM. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Ack-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-19Merge branch 'devel' of git.alsa-project.org:alsa-kernel into topic/miscTakashi Iwai
2010-07-19ALSA: pcm core - add a safe check to the silence filling functionJaroslav Kysela
In situation when appl_ptr is far greater then hw_ptr, the hw_avail value can be greater than buffer_size. Check for this. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-07-19ALSA: hda-intel - do not mix audio and modem function IDsJaroslav Kysela
The function IDs are different for audio and modem. Do not mix them. Also, show the unsolicited bit in the function_id register. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-07-19fix comment typos concerning "challenge"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19pm_qos: Get rid of the allocation in pm_qos_add_request()James Bottomley
All current users of pm_qos_add_request() have the ability to supply the memory required by the pm_qos routines, so make them do this and eliminate the kmalloc() with pm_qos_add_request(). This has the double benefit of making the call never fail and allowing it to be called from atomic context. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: mark gross <markgross@thegnar.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-17ASoC: imx: check kzalloc() result and fix memory leakKulikov Vasiliy
If kzalloc() fails we must exit with -ENOMEM. Also we must free allocated runtime->private_data on error as it would be lost on next call to snd_imx_open(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-17ASoC: imx: check kzalloc() result and fix memory leakKulikov Vasiliy
If kzalloc() fails we must exit with -ENOMEM. Also we must free allocated runtime->private_data on error as it would be lost on next call to snd_imx_open(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-17ASoC: davinci: check kzalloc() result (typo)Kulikov Vasiliy
The code checks 'davinci_vc' after kzalloc() and do not checks 'davinci_vcif_dev' that kzalloc() result is assigned to. It seems that it is a typo (autocompletion?). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-17ASoC: fsi: Add specified ID for soc-audioKuninori Morimoto
Specified ID is necessary, when some codecs are used with FSI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-17Merge branch 'for-2.6.35' into for-2.6.36Mark Brown
2010-07-17ASoC: Remove duplicate AUX definition from WM8776Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-07-17ASoC: TWL6040: Correct widget handling for driversJorge Eduardo Candelaria
In order to reduce pop-noise at powering up/down of the DACs and Drivers, these components have to be handled in a specific sequence. Headset, Handsfree, and Earphone drivers are now registered as PGA components to ensure DACs are enabled first. Also, add a delay to leave time for DACs to settle before continuing power up/down sequence. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-16ALSA: asihpi - Avoid useless assignment of returned index values.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-16ALSA: asihpi - Avoid using c99 uintX types.Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-16ALSA: asihpi - HPI version 4.04.01Eliot Blennerhassett
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-16ALSA: asihpi: fix sign bugKulikov Vasiliy
bytes_per_sec is unsigned, so if snd_pcm_format_width() return error we would not see it. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-15ALSA: Kconfig: SND_AC97_POWER_SAVE description improvementMichael Witten
The description has been expanded to explain the time-out value provided by the power_save module parameter. Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-15Kconfig: fixo typo in "Xilinx'"Michael Witten
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-14ASoC: Handle read failures in codec_regMark Brown
When a device is powered down volatile registers can't be read so attempts to display codec_reg will show error values, and obviously it is also possible for there to be hardware errors too. Check for errors from reads and display them more clearly when formatting codec_reg. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-14Merge branch 'for-2.6.35' into for-2.6.36Mark Brown
2010-07-14ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_registerAxel Lin
snd_soc_unregister_codec is called twice if snd_soc_register_dai fail. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-14ASoC: wm8727: add a missing return in wm8727_platform_probeAxel Lin
otherwise the error path will always be executed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-14sound/oss-msnd-pinnacle: ioctl needs the inodeArnd Bergmann
This broke in sound/oss: convert to unlocked_ioctl, when I missed one of the ioctl functions still using the inode pointer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-13ALSA: hda - Add support of dual-ADCs for Realtek ALC275Takashi Iwai
Some VAIO models with ALC275 have dual ADCs for both internal and external mics, and the driver needs to switch one of them appropriately. This patch adds a basic support for this functionality, dynamic switching between two ADCs per jack plug state. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-13ASoC: au1x: fix section mismatch in psc-i2s.cManuel Lauss
Annotate platform probe callback with __devinit instead of plain __init. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: kirkwood-i2s: Handle mute/unmute playback/recordarnaud.patard@rtp-net.org
The controller has mute/unmute capability and some bootloader may mute them at boot. If it's not handled, all things will seem to be working but no sound will come out of the speaker/headphone. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: Fix kirkwood i2s mono playbackarnaud.patard@rtp-net.org
Kirkwood controller needs to be informed if the audio stream is mono or not. Failing to do so will result in playing at the wrong speed. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: Fixup for master modeKuninori Morimoto
This patch add hw_params to snd_soc_dai_ops, because board specific set_rate is needed when FSI was used as master mode. This patch remove fsi_clk_ctrl from fsi_dai_startup, because clock should be disabled before set_rate. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: Add pr_err for noticing unsupported accessKuninori Morimoto
This patch didn't use dev_err, because it is difficult to get struct device here. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: Change struct fsi_regs to fsi_coreKuninori Morimoto
Many registers which were grouped by category were added in FSI2. To make easy to switch FSI/FSI2, fsi_core was added instead of fsi_regs. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: remove noisy CR_FMT macroKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: remove un-used variable on fsi_dai_startupKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: Remove unnecessary casts of private_dataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: Remove unnecessary casts of private_dataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13Merge branch 'for-2.6.35' into for-2.6.36Mark Brown
2010-07-13ASoC: fsi: fixup wrong value setting order of TDMKuninori Morimoto
channel size should be set before setting register value Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: fixup clock inversion operationKuninori Morimoto
Clock inversion should be specified by each flags bit. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: TWL4030: DAC power optimizationPeter Ujfalusi
Restructure the DAPM connections in order to enable only the needed DAC (out of four in twl4030 series). I need to keep the 'AIF Enable' supply connected to the L2/R2 digital path, since the digital loopback needs AIF and APLL running. If no valid route available, than none of the DAC will be powered, but the AIF and APLL is going to be enabled. Furthermore, if only one audio path have valid route, than only the corresponding DAC will be powered. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsomicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-13ASoC: TWL4030: Fix for digital loopback gain rangePeter Ujfalusi
When the gain is configured using dB value it was not possible to use -24dB since the loopback got muted instead of -24dB. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsomicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-12Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Restore cleared pin controls on resume
2010-07-12sound/oss: convert to unlocked_ioctlArnd Bergmann
These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12fix comnment/printk typos concerning "empty"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-12sound: push BKL into open functionsArnd Bergmann
This moves the lock_kernel() call from soundcore_open to the individual OSS device drivers, where we can deal with it one driver at a time if needed, or just kill off the drivers. All core components in ALSA already provide adequate locking in their open()-functions and do not require the big kernel lock, so there is no need to add the BKL there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12ALSA: HDA: VT1708S: fix Smart5.1 modeClemens Ladisch
Correctly configure bidirectional pins when resuming; do not power down widgets when they are needed for Smart5.1 output; and on 3-jack boards, create the streams and controls needed for six channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Viliam Kubis <viliam.kubis@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12ALSA: via82xx: allow changing the initial DXS volumeClemens Ladisch
As per-stream volume controls, the DXS controls are not intended to adjust the overall sound level and so are initialized every time a stream is opened. However, there are special situations where one wants to reduce the overall volume in the digital domain, i.e., before the AC'97 codec's PCM volume control. To allow this, add a module parameter that sets the initial DXS volume. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Soeren D. Schulze <soeren.d.schulze@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-09ALSA: usb-audio: silence a superfluous warningClemens Ladisch
It is not advisable to print a warning when a device does not support setting the sample rate because this is perfectly valid for devices with a single rate or where rates are implicitly changed by selecting another alternate setting. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-09Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2010-07-09ALSA: hda - Limit the amp value to writeTakashi Iwai
Check the amp max value at put callbacks and set the upper limit so that the driver won't write any invalid value over the defined range. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-09ALSA: hda - Add beep mixer support to Conexant codecsTakashi Iwai
Added the beep mixer controls to Conexant codecs. They simply control the digital beep generator widget. For cx5047, I couldn't find any beep generator, so it's not implemented there. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 00:19:50 +0000