summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2018-08-18Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull DMAengine updates from Vinod Koul: "This round brings couple of framework changes, a new driver and usual driver updates: - new managed helper for dmaengine framework registration - split dmaengine pause capability to pause and resume and allow drivers to report that individually - update dma_request_chan_by_mask() to handle deferred probing - move imx-sdma to use virt-dma - new driver for Actions Semi Owl family S900 controller - minor updates to intel, renesas, mv_xor, pl330 etc" * tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Add Actions Semi Owl family S900 DMA driver dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr() dmaengine: mic_x100_dma: use the new helper to simplify the code dmaengine: add a new helper dmaenginem_async_device_register dmaengine: imx-sdma: add memcpy interface dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' dmaengine: dma_request_chan_by_mask() to handle deferred probing dmaengine: pl330: fix irq race with terminate_all dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST" dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address dmaengine: mv_xor_v2: enable COMPILE_TEST dmaengine: mv_xor_v2: move unmap to before callback dmaengine: mv_xor_v2: convert callback to helper function dmaengine: mv_xor_v2: kill the tasklets upon exit dmaengine: mv_xor_v2: explicitly freeup irq dmaengine: sh: rcar-dmac: Add dma_pause operation dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier dmaengine: idma64: Support dmaengine_terminate_sync() dmaengine: hsu: Support dmaengine_terminate_sync() ...
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-15ALSA: update dell-wmi mic-mute registration to new world orderLinus Torvalds
Commit c647f806b8c2 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") changed the return value of the snd_hda_gen_add_micmute_led() without actually updating the callers. Admittedly, almost no callers actually cared about the return value. But one call site very much did: the Dell wmi code. It would see the registration return zero, which _used_ to mean "failed" but now means "success", and clear the dell_micmute_led_set_func pointer. End result: the successful registration would end up calling the Dell code that thought it had all failed, and call through a NULL pointer. To make matters worse, it ends up being a tail-call, and with the retpoline sequence you don't even see the caller (dell_micmute_update()) in the stack trace, so the error ended up way less obvious than it should have been. Fixes: c647f806b8c2 "ALSA: hda - Allow multiple ADCs for mic mute LED controls" Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-13Merge tag 'asoc-v4.19' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.19 A fairly big update, including quite a bit of core activity this time around (which is good to see) along with a fairly large set of new drivers. - A new snd_pcm_stop_xrun() helper which is now used in several drivers. - Support for providing name prefixes to generic component nodes. - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing. - Generalization of the DIO2125 support to a simple amplifier driver. - Accessory detection support for the audio graph card. - DT support for PXA AC'97 devices. - Quirks for a number of new x86 systems. - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
2018-08-12Merge branch 'for-next' into for-linusTakashi Iwai
Preparation for 4.19 merge material. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-09Merge branch 'asoc-4.19' into asoc-nextMark Brown
2018-08-09Merge branch 'asoc-4.18' into asoc-linusMark Brown
2018-08-09ASoC: adav80x: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056531 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-09ASoC: da7219: Add delays to capture path to remove DC offset noiseAdam Thomson
On some platforms it has been noted that a pop noise can be witnessed when capturing audio, mainly for first time after a headset jack has been inserted. This is due to a DC offset in the Mic PGA and so to avoid this delays are required when powering up the capture path. This commit rectifies the problem by adding delays post Mic PGA and post Mixin PGA. The post Mic PGA delay is determined based on Mic Bias voltage, and is only applied the first time after a headset jack is inserted. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-09ALSA: usb-audio: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357413 ("Missing break in switch") Addresses-Coverity-ID: 114917 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-09ALSA: mixart: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment with a proper "fall through" annotation, which is what GCC is expecting to find. Addresses-Coverity-ID: 114889 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: opl3: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114878 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add exit commands for Recon3DConnor McAdams
This patch adds exit functions for the Recon3D, and cleans up the current exit function. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Change mixer controls for Recon3DConnor McAdams
This patch adds changes to setup the Recon3D's mixer controls. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add Recon3D input and output select commandsConnor McAdams
This patch adds commands to the alternative input and output select commands to support the Recon3D. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add DSP setup defaults for Recon3DConnor McAdams
The Recon3D can use many of the same functions as the Recon3Di, so many of the r3di prefix function remain the same, but change their names to the more generic r3d prefix. This patch does this, and adds quirk checks for things specific to the Recon3Di. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add Recon3D startup functions and setupConnor McAdams
This patch adds functions for Recon3D startup, and sets values for things such as use_pci_mmio. It also renames some functions and tables from the sbz prefix into ca0132, as the Recon3D uses them as well. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmioConnor McAdams
This patch adds the ability to choose whether or not to map the pci region2, which is used for things such as GPIO on the Recon3D and Sound Blaster Z. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add Recon3D pincfgConnor McAdams
This patch adds pin configs from the Recon3D, taken from the Window's driver. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add quirk ID and enum for Recon3DConnor McAdams
This patch adds the PCI subsys ID for the Recon3D that has been tested, and adds the QUIRK_R3D enumeration. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Add alt_functions unsolicited responseConnor McAdams
This patch fixes a previous oversight where the microphone unsolicited response would use the wrong input selection function. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Clean up ca0132_init function.Connor McAdams
This patch cleans up ca0132_init by removing unnecessary commands and ordering things better. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ALSA: hda/ca0132 - Create mmio gpio function to make code clearerConnor McAdams
This patch adds a new function, ca0132_mmio_gpio_set, to clear up what is going on with writes to mmio region 0x320. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-08ASoC: wm_adsp: Make DSP name configurable by codec driverRichard Fitzgerald
Instead of harcoding that a core must always be called "DSPn" add a name member to struct wm_adsp so that the owning codec driver can provide a custom name. This allows for re-use of the wm_adsp driver with parts where the processing cores are named differently. If no name is provided the default DSPn name is used. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08Merge branch 'asoc-4.18' into asoc-4.19 wmadsp depMark Brown
2018-08-08ASoC: wm_adsp: Declare firmware controls from codec driverRichard Fitzgerald
To allow for more flexibility in naming of DSP-type cores move the creation of the firmware controls to the codec drivers instead of having a hardcoded list in wm_adsp. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08ASoC: max98373: Added software reset register to readable registersRyan Lee
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08ASoC: wm_adsp: Correct DSP pointer for preloader controlAjit Pandey
The offset of the DSP core needs to be taken into account for the DSP preloader control get and put. Currently the dsp->preloaded variable will only ever be read/updated on the first DSP, whilst this doesn't affect the operation of the control the readback will be incorrect. Signed-off-by: Ajit Pandey <ajit.pandey@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-08ASoC: rt5677: Fix initialization of rt5677_of_match.dataMatthias Kaehlcke
The driver expects to find the device id in rt5677_of_match.data, however it is currently assigned to rt5677_of_match.type. Fix this. The problem was found with the help of clang: sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to zero treated as a null pointer constant of type 'const void *' [-Wnon-literal-null-conversion] { .compatible = "realtek,rt5677", RT5677 }, ^~~~~~ Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-07ASoC: compress: make BE and FE order inline with dpcmSrinivas Kandagatla
For some reason order of startup/hw_params/prepare are reversed in dynamic compress usecase when compared to dpcm usecase. This is a issue with platforms like QCOM where it expects the BE to be initialized before FE. Interestingly the compress trigger callback order is inline with dpcm. Am not 100% sure why the compress audio case has been reversed. This patch is making the order inline with dpcm. If the reverse ordering is just co-incendental then this change makes sense and will avoid inventing some new mechanism to cope with ordering. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ALSA: intel_hdmi: remove redundant variable cfg_valColin Ian King
Variable cfg_val is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'cfg_val' set but not used [-Wunused-but-set-variable] [ Background info about val_bit field from alsa-devel ML thread: tiwai: Actually this made me wonder what is the definition of val_bit. It seems always 1 in the current code after the commit 964ca8083c02. Pierre? pbossart: This val_bit is only there for debug/test, it should be set to one by default and has nothing to do with the lpcm_id. This variable was set even in patches before upstream submission and was never needed, I guess it must be a 9-yr old issue. Good catch! ] Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-06ASoC: AMD: Set delay value for the capture caseAkshu Agrawal
ACP->SYSMEM DMA happens at every I2S->SYSMEM period completion. Thus, there is delay of x frames till I2S->SYSMEM reaches a period length. This delay is communicated to user space. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: AMD: Modified DMA pointer for captureMukunda, Vijendar
Give position on ACP->SYSMEM DMA channel for the number of bytes that have been transferred on the basis of current descriptor under service. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: AMD: Make ACP->SYSMEM DMA non circularAkshu Agrawal
In capture case we don't want ACP to SYSMEM dma to be circular. This is because if an in place DSP filter is applied to captured output then circular DMA can overwrite the filter value with stale data. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8994: Fix missing break in switchGustavo A. R. Silva
Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-06ASoC: qdsp6: q6afe-dai: add SLIM tx AIF_IN dapmSrinivas Kandagatla
Add missing AIF_IN dapm for slim tx ports. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: qcom: remove unused header files from common.hSrinivas Kandagatla
This patch removes unused header files from common.h. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: sdm845: remove unused header filesSrinivas Kandagatla
This patch removes unused header files from the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: apq8096: remove unused header filesSrinivas Kandagatla
This patch removes unused header files from the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: qcom: make common.c as proper moduleSrinivas Kandagatla
This patch converts common helper functions in to proper module and also fixes below warning. WARNING: sound/soc/qcom/snd-soc-sdm845: 'qcom_snd_parse_of' exported twice. Previous export was in sound/soc/qcom/snd-soc-apq8096.ko Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8903: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: da9055: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm5100-tables: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: da7213: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: twl6040: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: da7219: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8996: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: cs4270: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: wm8990: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-06ASoC: tda7419: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>