Age | Commit message (Collapse) | Author |
|
The new Dell IoT platform uses kabylake + alc3277 codec, and alc3277
shares the driver with the codec rt5660, here we generate a new
machine driver based on kbl_da7219_max98357a.
The audio design on this IoT platform is as below:
- Intel kabylake platform
- connect the codec ALC3277 via SSP0
- line-out and line-in with Micbias jacks
- line-out mute control and jack detection of line-out and line-in
- two HDMI ports with audio capability
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-4.21 intel dep
|
|
Add support for the spdif input decoder of the axg SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
add IEC958_SUBFRAME_LE to the list of format accepted by the fifo frontend.
As opposed to what was initially noted in the toddr dai driver, the spdifin
does not place the msb at bit 28, it just output a whole spdif subframe.
Placing the msb at bit 28 in the toddr driver just filters out the parity,
user, channel status and validity bits. It is better to just provide the
whole spdif subframe to the userspace and let the iec958 plugin deal with
it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asoc_simple_card_probe
Commit 4fb7f4df49d3 ("ASoC: simple-card: use cpu/codec pointer on
simple_dai_props") updated {cpu,codec}_dai to be pointers in struct
simple_dai_props but didn't update these locations to dereference the
pointers.
This patch fixup it for non DT simple-card use case.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
eukrea-tlv320.c machine driver runs on non-DT platforms
and include <asm/mach-types.h> header file in order to be able
to use some machine_is_eukrea_xxx() macros.
Building it for ARM64 causes the following build error:
sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory
Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320
driver when ARM64 is selected.
This is needed in preparation for the i.MX8M support.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rsnd is using RSND_REG_xxx for register naming,
and using RSND_REG_##f style macro for read/write.
The biggest reason why it uses this style is that
we can avoid non-existing register access.
But, its demerit is sequential register access code will
be very ugly.
Current rsnd driver is well tested, so, let's remove RSND_REG_
from rsnd_reg, and cleanup sequential register access code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current simple-scu-card didn't care about codec_conf
for multi DPCM case. This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge simple-card and simple-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on simple-scu-card.
It is same logic with simple-card, thus easy merging.
This is prepare for merging simple card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-scu-card.c is supporting "convert-rate/channels" which is
used for DPCM.
But, sound card might have multi codecs, and each codec might need
each convert-rate/channels.
This patch supports each codec's convert-rate/channles support.
top node convert-rate/channels will overwrite settings if exist.
It can't support each codec's convert-rate/channels if sound card had
multi codecs without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DPCM case, it uses CPU-dummy / dummy-Codec dai links.
If sound card is caring only DPCM, link count = dai count,
but, if non DPCM case, link count != dai count.
Now, we want to merge simple-card and simple-scu-card,
then, we need to care both link / dai count more carefly
This patch cares it, and prepare for merging simple card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-card is supporting dai-link support, but simple-scu-card
doesn't have it.
This patch support it. This is prepare for merging simple-card
and simple-scu-card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current simple-scu-card driver is parsing codec position for DPCM
and consider DAI format. But, current operation is doing totally pointless,
because it should be called for each CPU/Codec pair.
Let's tidyup asoc_simple_card_parse_daifmt() timing.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge simple-card and simple-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on simple-card.
It is same logic with simple-scu-card, thus easy merging.
This is prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When CONFIG_OF is disabled, of_graph_parse_endpoint() does not
initialize 'info', and gcc can see that:
sound/soc/generic/simple-card-utils.c: In function 'asoc_simple_card_parse_graph_dai':
sound/soc/generic/simple-card-utils.c:284:13: error: 'info.port' may be used uninitialized in this function [-Werror=maybe-uninitialized]
It's probably best to check the return code anyway, and that also
takes care of the warning.
Fixes: b6f3fc005a2c ("ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Calling into the codec driver adds a dependency on that being reachable
from the module:
ERROR: "rt5663_sel_asrc_clk_src" [sound/soc/qcom/snd-soc-sdm845.ko]
undefined!
Add the corresponding select statement, as it is done in the other user
(Intel).
Fixes: f7485875a687 ("ASoC: sdm845: Add configuration for headset codec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
From the da7219 spec, the button A, B, C and D are remapped to
0, 1, 2 and 3 respectively where button A is KEY_PLAYPAUSE,
B is KEY_VOLUMEUP, C is KEY_VOLUMEDOWN and D is KEY_VOICECOMMAND.
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Signed-off-by: Max Chang <changmax@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk for the Point of View Mobii TAB-P1005W-232 v2.0 tablet, this
BYTCR device uses IN1 for its MIC and JD2 for jack-detect, rather then the
default IN3 and JD1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk for the Prowise PT301 tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Also it uses IN1 for its MIC and JD2 for jack-detect, rather then the
default IN3 and JD1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver rewritten, assign copyright notice and change module author
as original one remains silent and I want to be notified about bugs.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set DAI format and sysclk for headset codec.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set TDM time slots and DAI format for speaker codec.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound capture and line bypass currently do not work as well as
some mixer controls. Fix that by building proper audio paths and
adjusting volume controls to match datasheet.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop "Common NI Values Table" and calculate LRCLK divider, then
add allowed rate constraints based on master clock frequency.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement set_bias_level to drive shutdown bit, so device is
put to sleep when unused.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ret is assigned later, no need to initialize it.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Realtek codec ALC3277 is 100% compatible with the codec RT5660
in I2S mode. And on the Dell IoT platform, the codec is ALC3277,
and the HID of the codec in the BIOS is 10EC3277, so adding this
ID to the ACPI match table.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Get the reset GPIO through the GPIO consumer API. This allows specifying the
DT property as "reset-gpios" without breaking existing DT users.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Get the reset GPIO through the GPIO consumer API. This allows specifying the
DT property as "reset-gpios" without breaking existing DT users.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
For the FSL ASoC card, the full node names appear to be "ssi", "esai",
and "sai", so there's not any reason to use strstr and of_node_name_eq
can be used instead.
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AMD platform device acp_audio_dma can only be created by parent PCI
device driver (drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c). Pass struct
device of the parent to snd_pcm_lib_preallocate_pages() so
dma_alloc_coherent() can use correct dma_ops. Otherwise, it will
use default dma_ops which is nommu_dma_ops on x86_64 even when
IOMMU is enabled and set to non passthrough mode.
Though platform device inherits some dma related fields during its
creation in mfd_add_device(), we can't simply pass its struct device
to snd_pcm_lib_preallocate_pages() because dma_ops is not among the
inherited fields. Even it were, drivers/iommu/amd_iommu.c would
ignore it because get_device_id() doesn't handle platform device.
This change shouldn't give us any trouble even struct device of the
parent becomes null or represents some non PCI device in the future,
because get_dma_ops() correctly handles null struct device or uses
the default dma_ops if struct device doesn't have it set.
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We shouldn't assume CPU physical address we get from page_to_phys()
is same as DMA address we get from dma_alloc_coherent(). On x86_64,
we won't run into any problem with the assumption when dma_ops is
nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled.
And it's most likely different from CPU physical address when AMD
IOMMU is not in passthrough mode.
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Gnawty model Chromebook uses pmc_plt_clk_0 instead of pmc_plt_clk_3
for the mclk, just like the Clapper and Swanky models.
This commit adds a DMI based quirk for this.
This fixing audio no longer working on these devices after
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
that commit fixes us unnecessary keeping unused clocks on, but in case of
the Gnawty that was breaking audio support since we were not using the
right clock in the cht_bsw_max98090_ti machine driver.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201787
Cc: stable@vger.kernel.org
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Jaime Pérez <19.jaime.91@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch added max98373_reset function to avoid amp software reset failure and code duplication.
Reset verification step has been added for stable amp reset and it repeats verification maximum 3 times when it is failed.
Chip revision ID is available when the amp is in the idle state which means software reset is completed well.
Additional 10ms delay was added for every retrial and maximum 30ms delay can be applied.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge audio-graph-card and audio-graph-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on audio-graph-card.
It is same logic with audio-graph-scu-card, thus easy merging.
This is prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current audio-graph-scu-card didn't care about codec_conf
for multi DPCM case. This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge audio-graph-card and audio-graph-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on audio-graph-scu-card.
It is same logic with audio-graph-card, thus easy merging.
This is prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DPCM case, it uses CPU-dummy / dummy-Codec dai links.
If sound card is caring only DPCM, link count = dai count,
but, if non DPCM case, link count != dai count.
Now, we want to merge audio-graph-card and audio-graph-scu-card,
then, we need to care both link / dai count more carefly
This patch cares it, and prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asoc_simple_card_get_dai_id() returns DAI ID, but it is based on
DT node's "endpoint" position.
Almost all cases 1 port has 1 endpoint, thus, it was no problem.
But in reality, port : endpoint = 1 : N, thus, counting endpoint
is BUG, it should based on "port" ID.
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support")
added TDM Split mode support for rsnd driver.
But, it cares audio-graph-card style only. We can't use TDM Split
mode on simple-card style now.
This patch fixup this issue.
Fixes: f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub")
add new .get_id/.get_id_sub to indicate module ID/subID.
It is used for SSIU and CTU. In SSIU case, subID indicates BUSIF,
but register settings is based on SSIU ID.
OTOH, in CTU case, subID indicates CTU channel, and register settings
is based on it. This means regmap read/write function needs to care it.
This patch fixup this issue. It can't play MIXed sound without this
patch.
Fixes: c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For TDM debug purpose, indicating Channel and Mode is very
useful. This patch indicate it if it has #define DEBUG
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Clapper model Chromebook uses pmc_plt_clk_0 instead of pmc_plt_clk_3
for the mclk, just like the Swanky model.
This commit adds a DMI based quirk for this.
This fixing audio no longer working on these devices after
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
that commit fixes us unnecessary keeping unused clocks on, but in case of
the Clapper that was breaking audio support since we were not using the
right clock in the cht_bsw_max98090_ti machine driver.
Cc: stable@vger.kernel.org
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These boards are now fully ported to devicetree and make use of the
simple-card driver, so the platform specific machine driver can be
removed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Entry needed for ICL RVP w/ RT274
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
256 * fs * 2 * mclk_src_scaling[i].param
Signed-off-by: Young_X <YangX92@hotmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pcm3168 codec support runtime_[resume|suspend], whenever it
is not active, it enters suspend mode, and it's clock and regulators
will be disabled. so there is no need to disable them again in
remove callback. Otherwise we got following kernel warnings,
when unload pcm3168a driver
[ 222.257514] unbalanced disables for amp-en-regulator
[ 222.262526] ------------[ cut here ]------------
[ 222.267158] WARNING: CPU: 0 PID: 2423 at drivers/regulator/core.c:2264 _regulator_disable+0x28/0x108
[ 222.276291] Modules linked in:
[ 222.279343] snd_soc_pcm3168a_i2c(-)
[ 222.282916] snd_aloop
[ 222.285272] arc4
[ 222.287194] wl18xx
[ 222.289289] wlcore
[ 222.291385] mac80211
[ 222.293654] cfg80211
[ 222.295923] aes_ce_blk
[ 222.298366] crypto_simd
[ 222.300896] cryptd
[ 222.302992] aes_ce_cipher
[ 222.305696] crc32_ce
[ 222.307965] ghash_ce
[ 222.310234] aes_arm64
[ 222.312590] gf128mul
[ 222.314860] snd_soc_rcar
[ 222.317476] sha2_ce
[ 222.319658] xhci_plat_hcd
[ 222.322362] sha256_arm64
[ 222.324978] xhci_hcd
[ 222.327247] sha1_ce
[ 222.329430] renesas_usbhs
[ 222.332133] evdev
[ 222.334142] sha1_generic
[ 222.336758] rcar_gen3_thermal
[ 222.339810] cpufreq_dt
[ 222.342253] ravb_streaming(C)
[ 222.345304] wlcore_sdio
[ 222.347834] thermal_sys
[ 222.350363] udc_core
[ 222.352632] mch_core(C)
[ 222.355161] usb_dmac
[ 222.357430] snd_soc_pcm3168a
[ 222.360394] snd_soc_ak4613
[ 222.363184] gpio_keys
[ 222.365540] virt_dma
[ 222.367809] nfsd
[ 222.369730] ipv6
[ 222.371652] autofs4
[ 222.373834] [last unloaded: snd_soc_pcm3168a_i2c]
[ 222.378629] CPU: 0 PID: 2423 Comm: rmmod Tainted: G WC 4.14.63-04798-gd456126e4a42-dirty #457
[ 222.388196] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[ 222.396199] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[ 222.402117] PC is at _regulator_disable+0x28/0x108
[ 222.406906] LR is at _regulator_disable+0x28/0x108
[ 222.411695] pc : [<ffff0000083bd89c>] lr : [<ffff0000083bd89c>] pstate: 00000145
[ 222.419089] sp : ffff00000a0a3c80
[ 222.422401] x29: ffff00000a0a3c80
[ 222.425799] x28: ffff8006fa8c6200
[ 222.429199] x27: ffff0000086f1000
[ 222.432597] x26: 000000000000006a
[ 222.435997] x25: 0000000000000124
[ 222.439395] x24: 0000000000000018
[ 222.442795] x23: 0000000000000006
[ 222.446193] x22: ffff8006f925d490
[ 222.449592] x21: ffff8006f9ac2068
[ 222.452991] x20: ffff8006f9ac2000
[ 222.456390] x19: 0000000000000005
[ 222.459787] x18: 000000000000000a
[ 222.463186] x17: 0000000000000000
[ 222.466584] x16: 0000000000000000
[ 222.469984] x15: 000000000d3f616a
[ 222.473382] x14: 0720072007200720
[ 222.476781] x13: 0720072007200720
[ 222.480179] x12: 0720072007200720
[ 222.483578] x11: 0720072007200720
[ 222.486975] x10: 0720072007200720
[ 222.490375] x9 : 0720072007200720
[ 222.493773] x8 : 07200772076f0774
[ 222.497172] x7 : 0000000000000000
[ 222.500570] x6 : 0000000000000007
[ 222.503969] x5 : 0000000000000000
[ 222.507367] x4 : 0000000000000000
[ 222.510766] x3 : 0000000000000000
[ 222.514164] x2 : c790b852091e2600
[ 222.517563] x1 : 0000000000000000
[ 222.520961] x0 : 0000000000000028
[ 222.524361] Call trace:
[ 222.526805] Exception stack(0xffff00000a0a3b40 to 0xffff00000a0a3c80)
[ 222.533245] 3b40: 0000000000000028 0000000000000000 c790b852091e2600 0000000000000000
[ 222.541075] 3b60: 0000000000000000 0000000000000000 0000000000000007 0000000000000000
[ 222.548905] 3b80: 07200772076f0774 0720072007200720 0720072007200720 0720072007200720
[ 222.556735] 3ba0: 0720072007200720 0720072007200720 0720072007200720 000000000d3f616a
[ 222.564564] 3bc0: 0000000000000000 0000000000000000 000000000000000a 0000000000000005
[ 222.572394] 3be0: ffff8006f9ac2000 ffff8006f9ac2068 ffff8006f925d490 0000000000000006
[ 222.580224] 3c00: 0000000000000018 0000000000000124 000000000000006a ffff0000086f1000
[ 222.588053] 3c20: ffff8006fa8c6200 ffff00000a0a3c80 ffff0000083bd89c ffff00000a0a3c80
[ 222.595883] 3c40: ffff0000083bd89c 0000000000000145 0000000000000000 0000000000000000
[ 222.603713] 3c60: 0000ffffffffffff ffff00000a0a3c30 ffff00000a0a3c80 ffff0000083bd89c
[ 222.611543] [<ffff0000083bd89c>] _regulator_disable+0x28/0x108
[ 222.617375] [<ffff0000083bd9c4>] regulator_disable+0x48/0x68
[ 222.623033] [<ffff0000083be8e4>] regulator_bulk_disable+0x58/0xc0
[ 222.629134] [<ffff0000007d831c>] pcm3168a_remove+0x30/0x50 [snd_soc_pcm3168a]
[ 222.636270] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[ 222.644106] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[ 222.649766] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[ 222.656640] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[ 222.661951] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[ 222.667609] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[ 222.673268] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[ 222.678666] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[ 222.687019] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[ 222.692850] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[ 222.699289] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[ 222.707119] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[ 222.714948] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[ 222.722778] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[ 222.730607] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[ 222.738436] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[ 222.746266] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[ 222.754096] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[ 222.761926] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[ 222.769755] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 222.777589] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[ 222.782899] ---[ end trace eaf8939a3698b1a8 ]---
[ 222.787609] Failed to disable VCCDA2: -5
[ 222.791649] ------------[ cut here ]------------
[ 222.796283] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:595 clk_core_disable+0xc/0x1d8
[ 222.804460] Modules linked in:
[ 222.807511] snd_soc_pcm3168a_i2c(-)
[ 222.811083] snd_aloop
[ 222.813439] arc4
[ 222.815360] wl18xx
[ 222.817456] wlcore
[ 222.819551] mac80211
[ 222.821820] cfg80211
[ 222.824088] aes_ce_blk
[ 222.826531] crypto_simd
[ 222.829060] cryptd
[ 222.831155] aes_ce_cipher
[ 222.833859] crc32_ce
[ 222.836127] ghash_ce
[ 222.838396] aes_arm64
[ 222.840752] gf128mul
[ 222.843020] snd_soc_rcar
[ 222.845637] sha2_ce
[ 222.847818] xhci_plat_hcd
[ 222.850522] sha256_arm64
[ 222.853138] xhci_hcd
[ 222.855407] sha1_ce
[ 222.857589] renesas_usbhs
[ 222.860292] evdev
[ 222.862300] sha1_generic
[ 222.864917] rcar_gen3_thermal
[ 222.867968] cpufreq_dt
[ 222.870410] ravb_streaming(C)
[ 222.873461] wlcore_sdio
[ 222.875991] thermal_sys
[ 222.878520] udc_core
[ 222.880789] mch_core(C)
[ 222.883318] usb_dmac
[ 222.885587] snd_soc_pcm3168a
[ 222.888551] snd_soc_ak4613
[ 222.891341] gpio_keys
[ 222.893696] virt_dma
[ 222.895965] nfsd
[ 222.897886] ipv6
[ 222.899808] autofs4
[ 222.901990] [last unloaded: snd_soc_pcm3168a_i2c]
[ 222.906783] CPU: 0 PID: 2423 Comm: rmmod Tainted: G WC 4.14.63-04798-gd456126e4a42-dirty #457
[ 222.916349] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[ 222.924351] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[ 222.930270] PC is at clk_core_disable+0xc/0x1d8
[ 222.934799] LR is at clk_core_disable_lock+0x20/0x34
[ 222.939761] pc : [<ffff0000083ab9b8>] lr : [<ffff0000083acd28>] pstate: 800001c5
[ 222.947154] sp : ffff00000a0a3cf0
[ 222.950466] x29: ffff00000a0a3cf0
[ 222.953864] x28: ffff8006fa8c6200
[ 222.957263] x27: ffff0000086f1000
[ 222.960661] x26: 000000000000006a
[ 222.964061] x25: 0000000000000124
[ 222.967458] x24: 0000000000000015
[ 222.970858] x23: ffff8006f9ffa8d0
[ 222.974256] x22: ffff8006faf16480
[ 222.977655] x21: ffff0000007e7040
[ 222.981053] x20: ffff8006faadd100
[ 222.984452] x19: 0000000000000140
[ 222.987850] x18: 000000000000000a
[ 222.991249] x17: 0000000000000000
[ 222.994647] x16: 0000000000000000
[ 222.998046] x15: 000000000d477819
[ 223.001444] x14: 0720072007200720
[ 223.004843] x13: 0720072007200720
[ 223.008242] x12: 0720072007200720
[ 223.011641] x11: 0720072007200720
[ 223.015039] x10: 0720072007200720
[ 223.018438] x9 : 0720072007200720
[ 223.021837] x8 : 0720072007200720
[ 223.025236] x7 : 0000000000000000
[ 223.028634] x6 : 0000000000000007
[ 223.032034] x5 : 0000000000000000
[ 223.035432] x4 : 0000000000000000
[ 223.038831] x3 : 0000000000000000
[ 223.042229] x2 : 0000000004720471
[ 223.045628] x1 : 0000000000000000
[ 223.049026] x0 : ffff8006faadd100
[ 223.052426] Call trace:
[ 223.054870] Exception stack(0xffff00000a0a3bb0 to 0xffff00000a0a3cf0)
[ 223.061309] 3ba0: ffff8006faadd100 0000000000000000
[ 223.069139] 3bc0: 0000000004720471 0000000000000000 0000000000000000 0000000000000000
[ 223.076969] 3be0: 0000000000000007 0000000000000000 0720072007200720 0720072007200720
[ 223.084798] 3c00: 0720072007200720 0720072007200720 0720072007200720 0720072007200720
[ 223.092628] 3c20: 0720072007200720 000000000d477819 0000000000000000 0000000000000000
[ 223.100458] 3c40: 000000000000000a 0000000000000140 ffff8006faadd100 ffff0000007e7040
[ 223.108287] 3c60: ffff8006faf16480 ffff8006f9ffa8d0 0000000000000015 0000000000000124
[ 223.116117] 3c80: 000000000000006a ffff0000086f1000 ffff8006fa8c6200 ffff00000a0a3cf0
[ 223.123947] 3ca0: ffff0000083acd28 ffff00000a0a3cf0 ffff0000083ab9b8 00000000800001c5
[ 223.131777] 3cc0: ffff00000a0a3cf0 ffff0000083acd1c 0000ffffffffffff ffff8006faadd100
[ 223.139606] 3ce0: ffff00000a0a3cf0 ffff0000083ab9b8
[ 223.144483] [<ffff0000083ab9b8>] clk_core_disable+0xc/0x1d8
[ 223.150054] [<ffff0000083acd58>] clk_disable+0x1c/0x28
[ 223.155198] [<ffff0000007d8328>] pcm3168a_remove+0x3c/0x50 [snd_soc_pcm3168a]
[ 223.162334] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[ 223.170167] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[ 223.175826] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[ 223.182700] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[ 223.188012] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[ 223.193669] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[ 223.199329] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[ 223.204726] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[ 223.213079] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[ 223.218909] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[ 223.225349] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[ 223.233179] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[ 223.241008] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[ 223.248838] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[ 223.256668] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[ 223.264497] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[ 223.272327] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[ 223.280157] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[ 223.287986] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[ 223.295816] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 223.303648] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[ 223.308958] ---[ end trace eaf8939a3698b1a9 ]---
[ 223.313752] ------------[ cut here ]------------
[ 223.318383] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:477 clk_core_unprepare+0xc/0x1ac
[ 223.326733] Modules linked in:
[ 223.329784] snd_soc_pcm3168a_i2c(-)
[ 223.333356] snd_aloop
[ 223.335712] arc4
[ 223.337633] wl18xx
[ 223.339728] wlcore
[ 223.341823] mac80211
[ 223.344092] cfg80211
[ 223.346360] aes_ce_blk
[ 223.348803] crypto_simd
[ 223.351332] cryptd
[ 223.353428] aes_ce_cipher
[ 223.356131] crc32_ce
[ 223.358400] ghash_ce
[ 223.360668] aes_arm64
[ 223.363024] gf128mul
[ 223.365293] snd_soc_rcar
[ 223.367909] sha2_ce
[ 223.370091] xhci_plat_hcd
[ 223.372794] sha256_arm64
[ 223.375410] xhci_hcd
[ 223.377679] sha1_ce
[ 223.379861] renesas_usbhs
[ 223.382564] evdev
[ 223.384572] sha1_generic
[ 223.387188] rcar_gen3_thermal
[ 223.390239] cpufreq_dt
[ 223.392682] ravb_streaming(C)
[ 223.395732] wlcore_sdio
[ 223.398261] thermal_sys
[ 223.400790] udc_core
[ 223.403059] mch_core(C)
[ 223.405588] usb_dmac
[ 223.407856] snd_soc_pcm3168a
[ 223.410820] snd_soc_ak4613
[ 223.413609] gpio_keys
[ 223.415965] virt_dma
[ 223.418234] nfsd
[ 223.420155] ipv6
[ 223.422076] autofs4
[ 223.424258] [last unloaded: snd_soc_pcm3168a_i2c]
[ 223.429050] CPU: 0 PID: 2423 Comm: rmmod Tainted: G WC 4.14.63-04798-gd456126e4a42-dirty #457
[ 223.438616] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[ 223.446618] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[ 223.452536] PC is at clk_core_unprepare+0xc/0x1ac
[ 223.457239] LR is at clk_unprepare+0x28/0x3c
[ 223.461506] pc : [<ffff0000083ab5a4>] lr : [<ffff0000083ace4c>] pstate: 60000145
[ 223.468900] sp : ffff00000a0a3d00
[ 223.472211] x29: ffff00000a0a3d00
[ 223.475609] x28: ffff8006fa8c6200
[ 223.479009] x27: ffff0000086f1000
[ 223.482407] x26: 000000000000006a
[ 223.485807] x25: 0000000000000124
[ 223.489205] x24: 0000000000000015
[ 223.492604] x23: ffff8006f9ffa8d0
[ 223.496003] x22: ffff8006faf16480
[ 223.499402] x21: ffff0000007e7040
[ 223.502800] x20: ffff8006faf16420
[ 223.506199] x19: ffff8006faadd100
[ 223.509597] x18: 000000000000000a
[ 223.512997] x17: 0000000000000000
[ 223.516395] x16: 0000000000000000
[ 223.519794] x15: 0000000000000000
[ 223.523192] x14: 00000033fe89076c
[ 223.526591] x13: 0000000000000400
[ 223.529989] x12: 0000000000000400
[ 223.533388] x11: 0000000000000000
[ 223.536786] x10: 00000000000009e0
[ 223.540185] x9 : ffff00000a0a3be0
[ 223.543583] x8 : ffff8006fa8c6c40
[ 223.546982] x7 : ffff8006fa8c6400
[ 223.550380] x6 : 0000000000000001
[ 223.553780] x5 : 0000000000000000
[ 223.557178] x4 : ffff8006fa8c6200
[ 223.560577] x3 : 0000000000000000
[ 223.563975] x2 : ffff8006fa8c6200
[ 223.567374] x1 : 0000000000000000
[ 223.570772] x0 : ffff8006faadd100
[ 223.574170] Call trace:
[ 223.576615] Exception stack(0xffff00000a0a3bc0 to 0xffff00000a0a3d00)
[ 223.583054] 3bc0: ffff8006faadd100 0000000000000000 ffff8006fa8c6200 0000000000000000
[ 223.590884] 3be0: ffff8006fa8c6200 0000000000000000 0000000000000001 ffff8006fa8c6400
[ 223.598714] 3c00: ffff8006fa8c6c40 ffff00000a0a3be0 00000000000009e0 0000000000000000
[ 223.606544] 3c20: 0000000000000400 0000000000000400 00000033fe89076c 0000000000000000
[ 223.614374] 3c40: 0000000000000000 0000000000000000 000000000000000a ffff8006faadd100
[ 223.622204] 3c60: ffff8006faf16420 ffff0000007e7040 ffff8006faf16480 ffff8006f9ffa8d0
[ 223.630033] 3c80: 0000000000000015 0000000000000124 000000000000006a ffff0000086f1000
[ 223.637863] 3ca0: ffff8006fa8c6200 ffff00000a0a3d00 ffff0000083ace4c ffff00000a0a3d00
[ 223.645693] 3cc0: ffff0000083ab5a4 0000000060000145 0000000000000140 ffff8006faadd100
[ 223.653523] 3ce0: 0000ffffffffffff ffff0000083ace44 ffff00000a0a3d00 ffff0000083ab5a4
[ 223.661353] [<ffff0000083ab5a4>] clk_core_unprepare+0xc/0x1ac
[ 223.667103] [<ffff0000007d8330>] pcm3168a_remove+0x44/0x50 [snd_soc_pcm3168a]
[ 223.674239] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[ 223.682070] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[ 223.687731] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[ 223.694604] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[ 223.699915] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[ 223.705572] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[ 223.711230] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[ 223.716628] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[ 223.724980] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[ 223.730811] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[ 223.737250] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[ 223.745079] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[ 223.752909] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[ 223.760739] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[ 223.768568] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[ 223.776398] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[ 223.784227] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[ 223.792057] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[ 223.799886] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[ 223.807715] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 223.815546] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[ 223.820855] ---[ end trace eaf8939a3698b1aa ]---
Fix this issue by only disable clock and regulators in remove callback
when CONFIG_PM isn't defined
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introducing a module param for wakeup_delay in order to
align with modeswitch_delay parameter. With this change, both
wakeup_delay and modeswitch_delay parameters can be passed
as module parameters.
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On startup, applications such as PulseAudio or CRAS enable playback or
capture on all PCM devices to verify that configurations are correct,
and close them immediately. For DMICs, this can result in the clock
being turned off very quickly, which may not compatible with internal
state machine transition requirements.
This patch add a mode-switch delay which will prevent the clock from
being turned off without complying with manufacturer timing
specifications. While the DMIC clock may be controlled at a lower level,
be it with hardware or firmware, applying the delay during the
STOP_TRIGGER phase ensures that there is no race condition, e.g. with
the hardware/firmware turning off the clock earlier
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a callback for init ops on dai_link to create and setup jack.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|