summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2011-11-08ASoC: Convert WM8962 to direct regmap usageMark Brown
This initial conversion just moves the register init, regulator acquisition and device verification out to the I2C probe(). Movement of other parts of the driver like the GPIO and beep generation code will follow. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: Convert WM8996 gpiolib to regmapMark Brown
Actually pretty straightforward. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: Move most WM8996 resource acquisition to I2C probeMark Brown
Now that the WM8996 driver is using the regmap API for register I/O we no longer need the ASoC card to be active in order to interact with the chip. In order to be more idiomatic for Linux move most of the existing probe() function out into the I2C probe() function prior to registration with ASoC. The IRQ and GPIO init will be moved separately as these are slightly more involved. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: Convert WM8996 to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: Avoid a redundant read in cs42l51_pdn_eventAxel Lin
snd_soc_update_bits already does read-modify-write, no need to read the register before calling snd_soc_update_bits. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: add valid data position control supportKuninori Morimoto
FSI2 can control valid data position, like package in front/back or stream mode (16bit x 2). But current fsi driver is assuming it was in-back. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: ak4642: ak4642 was testedKuninori Morimoto
ak4642 was tested by ms7724se board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: fixup compile warningKuninori Morimoto
This patch fixup below warning ${linux}/sound/soc/sh/fsi.c:442:3:\ warning: passing argument 1 of '__fsi_reg_read' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:517:3: \ warning: passing argument 1 of '__fsi_reg_write' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:663:3: \ warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\ from integer without a cast Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08Merge branch 'for-3.2' into for-3.3Mark Brown
2011-11-08Merge branch 'for-3.2' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2
2011-11-08Merge branch 'for-3.2' into for-3.3Mark Brown
Conflicts: sound/soc/codecs/wm8940.c
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert the check of NO_PRESENCE pincfg default bit ALSA: hda - Fix a regression for DMA-position check with CA0110 ALSA: hda - Fix silent output regression with ALC861 ALSA: control: remove compilation warning on 32-bit ALSA: ua101: fix crash when unplugging
2011-11-06ALSA: hda - Revert the check of NO_PRESENCE pincfg default bitTakashi Iwai
The implementation on commit [08a1f5eb: ALSA: hda - Check NO_PRESENCE pincfg default bit] seems like a mis-interpretation of specification. The spec gives the reversed bit definition. But, following the spec also causes to change so many existing device configurations, thus we can't change it so easily for now. For 3.2-rc1, it's safer to revert this check (actually this patch comments out the code). We may re-introduced the fixed version once after the wider test-case coverages are done. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-06ALSA: hda - Fix a regression for DMA-position check with CA0110Takashi Iwai
The regression-fix in 3.1 for the check of DMA-position validity caused yet another regression for CA0110. As usual, this hardware seems working only with LPIB properly. Adding the appropriate driver-caps bit to force LPIB fixes the problem. Reported-and-tested-by: Andres Freund <andres@anarazel.de> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-06ALSA: hda - Fix silent output regression with ALC861Takashi Iwai
The 3.1 kernel has a regression for ALC861 codec where no sound output is heard with the default setup. It's because the amps in DACs aren't properly unmuted while the output mixers are assigned only to pins. This patch fixes the missing initialization of DACs when no mixer is assigned to them. Tested-by: Andrea Iob <andrea_iob@yahoo.it> Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-06ALSA: control: remove compilation warning on 32-bitOlof Johansson
This was introduced by 'ALSA: control: add support for ENUMERATED user space controls' which adds a u64 variable that gets cast to a pointer: sound/core/control.c: In function 'snd_ctl_elem_init_enum_names': sound/core/control.c:1089: warning: cast to pointer from integer of different size Cast to uintptr_t before casting to pointer to avoid the warning. Signed-off-by: Olof Johansson <olof@lixom.net> [cl: replace long with uintptr_t] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-06ALSA: ua101: fix crash when unpluggingClemens Ladisch
If the device is unplugged while running, it is possible for a PCM device to be closed after the disconnect callback has returned. This means that kill_stream_urb() and disable_iso_interface() would try to access already-invalid or freed USB data structures. The function free_usb_related_resources() was intended to prevent this, but forgot to clear the affected variables. Reported-and-tested-by: Olivier Courtay <olivier@courtay.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.33+ <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-05Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-04ASoC: Ensure we get an impedence reported for WM8958 jack detectMark Brown
Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Don't use wm8994->control_data when requesting IRQsMark Brown
The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Don't use wm8994->control_data in wm8994_readable_register()Mark Brown
The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-04ASoC: Disable thermal shutdown when not using speakers in wm_hubsMark Brown
The thermal shutdown support in wm_hubs devices is tied to the speaker drivers (which are the only high power subsystems within the device). Ensure minimal current usage when the thermal shutdown support is not required by disabling the circuit when the speaker drivers are powered down. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Manage thermal shutdown for WM8962Mark Brown
Disable the thermal shutdown circuits for headphone and speaker when the relevant outputs are not enabled in order to save current in idle modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Only enable thermal shutdown when required on WM9081Mark Brown
The WM9081 thermal shutdown is only effective when the speaker output is enabled so disable it when that is not in use for a small current saving. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04ASoC: Remove needless unlikely()Mark Brown
There's no point in adding unlikely() annotations outside of hot paths and on systems using these features the annotation will always be wrong (as opposed to being something that only comes up once in a while) so the annotation may even be harmful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda/realtek - Skip invalid digital out pins ALSA: hda/sigmatel - Automatically retrieve digital I/O widgets ALSA: hda - Remove unused variables ALSA: hda/realtek - Don't create alt-stream for capture when unnecessary ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default ALSA: hda - Check NO_PRESENCE pincfg default bit ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLK ASoC: Ensure the WM8962 oscillator and PLLs start up disabled ASoC: Ensure WM8962 PLL registers are reset ALSA: intel8x0 - Fix inclusion of kvm_para.h ALSA: hda_hwdep: Fix possible buffer overflow ASoC: Fix return value of wm5100_gpio_direction_out() ASoC: WM8904: Set `invert' bit for Capture Switch ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt ASoC: wm8711: Fix wrong mask for setting input audio data bit length select ALSA: intel8x0: Improve performance in virtual environment ALSA: hdspm - Enable all firmware ranges for PCI MADI/AES cards ALSA: hdsp - Correct HDSP_VERSION_BIT constant, thus partly fixing RPM detection ALSA: hdspm - Fix MADI channel format in the status ioctl ...
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-03Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-11-03ALSA: hda/realtek - Skip invalid digital out pinsTakashi Iwai
Some BIOS report invalid pins as digital output pins. The driver checks the connection but it doesn't do it fully correctly, and it leaves some undefined value as the audio-out widget, which makes the driver spewing warnings. This patch fixes the issue. Reference: https://bugzilla.novell.com/show_bug.cgi?id=727348 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-03ALSA: hda/sigmatel - Automatically retrieve digital I/O widgetsCharles Chin
Revise stac92xx_parse_auto_config to automatically scan for digital input and output converters. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda - Remove unused variablesTakashi Iwai
Just clean-up what GCC caught. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda/realtek - Don't create alt-stream for capture when unnecessaryTakashi Iwai
When the driver finds multiple ADCs, it tries to create an alternative capture PCM stream. However, these secondary ADCs might be useless or in uncontrolled paths in some cases, e.g. when auto-mic or dynamic ADC-switching is enabled. Also, when only a single capture source is available, the multi-streams don't make sense, too. With this patch, the driver checks such condition and skips the alt stream appropriately. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02Merge branch 'for-linus' of git://github.com/richardweinberger/linuxLinus Torvalds
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits) um: fix ubd cow size um: Fix kmalloc argument order in um/vdso/vma.c um: switch to use of drivers/Kconfig UserModeLinux-HOWTO.txt: fix a typo UserModeLinux-HOWTO.txt: remove ^H characters um: we need sys/user.h only on i386 um: merge delay_{32,64}.c um: distribute exports to where exported stuff is defined um: kill system-um.h um: generic ftrace.h will do... um: segment.h is x86-only and needed only there um: asm/pda.h is not needed anymore um: hw_irq.h can go generic as well um: switch to generic-y um: clean Kconfig up a bit um: a couple of missing dependencies... um: kill useless argument of free_chan() and free_one_chan() um: unify ptrace_user.h um: unify KSTK_... um: fix gcov build breakage ...
2011-11-02ASoC: Fix sort of jz4740 in MakefileMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-02ASoC: Sort LM4857 with the CODECs in the MakefileMark Brown
Having a separate list for amps is a little confusing now the official driver model for them is the same as for other CODECs so let's sort them into the CODEC list, but only do this for those that are actual CODEC drivers so it's easier to remember which ones need updating. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-02um: switch to use of drivers/KconfigAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02ALSA: hda - Add support for 92HD65 / 92HD66 family of codecsCharles Chin
These codecs have SPDIF-in, which is new to the 92HD83xxx compatible families, so a bit of logic is added to support them. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda - Disable power-widget control for IDT 92HD83/93 as defaultCharles Chin
The power-widget control in patch_stac92hd83xxx() never worked properly, thus it's safer to turn it off as default for now. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda - Check NO_PRESENCE pincfg default bitTakashi Iwai
HD-audio spec defines a bit in pin default configuration for indicating that the pin isn't used for jack-detection although the codec is capable of it. Better to check this bit as well in jack_is_detectable() helper function. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-01ASoC: Disable MICBIAS and SYSCLK when stopping WM8962 accessory detectionMark Brown
They aren't needed any more. If machines need them for other purposes then further changes will be required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-01ASoC: WM8962 accessory detection requires MICBIASMark Brown
Force MICBIAS on as well as SYSCLK as the WM8962 accessory detection can't function without both. No point in making machine drivers manually enable it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-01ASoC: Enable SYSCLK last when enabling WM8962 mic detectionMark Brown
Ensure everything is set up before we start detecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-01ASoC: Start WM8962 FLL if SYSCLK is enabledMark Brown
Since we have code to automatically manage the start and stop of the FLL based on the SYSCLK widget if SYSCLK is already enabled and the FLL is configured then we need to start it up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-01ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLKMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-01ASoC: Ensure the WM8962 oscillator and PLLs start up disabledMark Brown
Since there is no current software control for these they would otherwise be left enabled, consuming power. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-01ASoC: Ensure WM8962 PLL registers are resetMark Brown
The WM8962 has a separate software reset for the PLL registers. Ensure that these are reset also on startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-01ALSA: intel8x0 - Fix inclusion of kvm_para.hTakashi Iwai
<linux/kvm_para.h> should be included instead of <asm/...> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-01ALSA: hda_hwdep: Fix possible buffer overflowAlexander Stein
If a line in the firmware file is larger than the given buffer size (and so the firmware file size), size is set to a value larger than the actual buffer size. This results in an overflow in the buffer passed. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-01 09:24:19 +0000