summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2012-09-10ASoC: wm8523: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10ASoC: wm8523: Move regulator acquisition to I2C probe()Mark Brown
This is better style since we acquire all needed resources before we try to do the ASoC card probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10ASoC: wm8523: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10ASoC: wm8983: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10ASoC: wm8983: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-08ASoC: dapm: Add flags to regulator suppliesMark Brown
This will be used to enable additional control of the regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-09-06ASoC: imx-mc13783: use defines instead of numerical address of registerGaëtan Carlier
This uses already defined name of registers and makes code more readable. Signed-off-by: Gaëtan Carlier <gcembed@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: Revert 'ASoC: imx-ssi: Remove mono support'Javier Martin
Revert 0865a75(ASoC: imx-ssi: Remove mono support). The bug this patch is meant to solve doesn't occur in Visstrim_M10 boards. Furthermore, after applying this patch sound in Visstrim_M10 is played at slower rates. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: dapm: Ensure bypass paths are suspended and resumedMark Brown
Since bypass paths aren't part of DAPM streams and we may not have any DAPM streams there may not be anything that triggers a DAPM sync for them. Mark all input and output widgets as dirty and then sync to do so at the end of suspend and resume. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-09-06ASoC: Davinci: McASP: add support new McASP IP VariantHebbar, Gururaja
The OMAP2+ variant of McASP is different from Davinci variant w.r.to some register offset. Changes - Add new MCASP_VERSION_3 to identify new variant. New DT compatible "ti,omap2-mcasp-audio" to identify version 3 controller. - The register offsets are handled depending on the version. Note: DMA parameters (dma fifo offset) are not updated and will be done later. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: tegra: move platform data headerStephen Warren
Move the Tegra+WM8903 ASoC platform data header out of arch/arm/mach-tegra, as a pre-requisite of single zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: wm0010: Fix warning, use format %zu for type size_tEmil Goode
Fix warning by using format specifier %zu for type size_t Sparse warning: sound/soc/codecs/wm0010.c:411:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: wm0010: unlock on error pathDan Carpenter
We're holding the wm0010->lock mutex when we goto err_core. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: wm0010: Add missing IRQF_ONESHOTFengguang Wu
FYI, there are new coccinelle warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7 head: e3523e01869da20fdd12ffd19ae1df7bf492650e commit: e3523e01869da20fdd12ffd19ae1df7bf492650e [95/95] ASoC: wm0010: Add initial wm0010 DSP driver All coccinelle warnings: + sound/soc/codecs/wm0010.c:850:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT -- + sound/soc/codecs/wm0010.c:660:1-7: preceding lock on line 359 vim +850 sound/soc/codecs/wm0010.c 847 trigger = IRQF_TRIGGER_FALLING; 848 trigger |= IRQF_ONESHOT; 849 > 850 ret = request_threaded_irq(irq, NULL, wm0010_irq, trigger, 851 "wm0010", wm0010); 852 if (ret) 853 dev_err(wm0010->dev, "Failed to request IRQ %d: %d\n", Please consider folding the attached diff :-) Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05Merge branch 'asoc-omap' into for-3.7Mark Brown
2012-09-05ASoC: omap-mcbsp: Fix compilation error due to leftover codePeter Ujfalusi
Part of commit (which patches sound/soc/omap/mcbsp.c file): 8fef626 ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code since the tree where it has been applied did not had the earlier patch: d0db84e ASoC: omap-mcbsp: Fix 6pin mux configuration which changed code around omap_mcbsp_6pin_src_mux(). Because of the missing part from 8fef626 the sound/soc/omap/mcbsp.c does not compile in linux-next. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05Merge tag 'v3.6-rc4' into asoc-omapMark Brown
Linux 3.6-rc4
2012-08-31ASoC: Davinci: evm: Fix typo in cpu dai nameHebbar, Gururaja
Fix typo caused by recent commit (cf53756 - ASoC: davinci: davinci-pcm does not need to be a plaform_driver) Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28ASoC: Rename ep93xx soc directory to cirrusAlexander Shiyan
This patch is to rename the directory "ep93xx" in "cirrus". Name more accurately reflects the manufacturer and allows to add drivers not only for architecture ep93xx in this directory. Patch not contain any functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28ASoC: SAMSUNG: Change Kconfig to support all SAMSUNG ASoCSangsu Park
All SAMSUNG ASoC needs SND_SOC_SAMSUNG configuration. This patch change Kconfig to support all SAMSUNG ASoC. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: Davinci: McASP: add device tree support for McASPHebbar, Gururaja
Add device tree probe for McASP driver. Note: DMA parameters are not populated from DT and will be done later. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC/ARM: Davinci: McASP: split asp header into platform and audio specificHebbar, Gururaja
Davinci McASP header & driver are shared by few OMAP platforms (like TI81xx, AM335x). Splitting asp header into Davinci platform specific header and Audio specific header helps to share them across platforms. Audio specific defines is moved to to common <linux/platform_data/davinci_asp.h> so that the header can be accessed by all related platforms. While here, correct the header usage (remove multiple header re-definitions and unused headers) and remove platform names from structures comments and enum. Also some some coding style errors. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: davinci: davinci-pcm does not need to be a plaform_driverHebbar, Gururaja
Same as the commit 518de86 (ASoC: tegra: register 'platform' from DAIs, get rid of pdev). It makes davinci-pcm not a platform_driver but helper to register "platform", so that the platform_device for davinci-pcm can be saved completely. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: tlv320aic3x: Add device tree bindingsHebbar, Gururaja
Device tree support for tlv320aic3x CODEC driver. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: ad1836: Use module_spi_driverSachin Kamat
module_spi_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: wm8770: Use module_spi_driverSachin Kamat
module_spi_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: tlv320aic26: Use module_spi_driverSachin Kamat
module_spi_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25Merge branch 'asoc-omap' into for-3.7Mark Brown
2012-08-25ASoC: omap-mcbsp: Single macro for st channel volume set/getPeter Ujfalusi
Since we always need to have set and get callbacks for McBSP sidetone it makes sense to combine the two macro to create the two callbacks. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: omap-mcbsp: Use macro to create the McBSP2/3 ST controlsPeter Ujfalusi
To remove duplicated code from the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: omap-mcbsp: Only print warning if the st_data is missing for the portPeter Ujfalusi
When asked to add the ST controls warn only if the st_data is missing. In this way we do not block the otherwise functional card to probe. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: omap-mcbsp: Check mcbsp->id instead of cpu_dai->id when adding ST controlsPeter Ujfalusi
In ddevice tree booted kernel all device have unique name and their device id is set to 0. Use the mcbsp->id for checking to decide which control set we should add for McBSP sidetone handling. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Move resource acquisition to device probeMark Brown
This is more idimatic for modern drivers. Also fix a couple of return codes while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Tweak diagnostic outputMark Brown
Make it scan better by writing ROM with capitals. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Don't double free reset GPIOMark Brown
We are using devm_ to allocate the GPIO so it will be freed automatically. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Set idle_bias_offMark Brown
Doesn't make any practical difference given that _SUSPEND and _OFF are equivalent for the driver but it's what we're really doing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Add dummy widget for CLKINMark Brown
Make it easier to integrate the management of the clock supplying the WM0010 with DAPM by providing a dummy supply widget which supplies the interface widgets, this can be connected to clock outputs by the machines. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Enable 44.1kHz supportMark Brown
With appropriate clocking configuration the WM0010 driver supports 44.1kHz audio; enable that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: samsung: Add hookup of WM0010 on SpeysideMark Brown
The Speyside platform by default has a WM0010 fitted. Now that we have a public driver hook it up in the machine integration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: wm0010: Fix passthrough routingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-23ASoC: wm0010: Add initial wm0010 DSP driverDimitris Papastamos
The WM0010 is a compact digital signal processor that has been highly optimised for low-power audio applications. Extensive memory resources and core optimisation allow the device to manage all audio processing algorithms efficiently and autonomously, while the host processor sleeps or performs other tasks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-23ASoC: wm8994: Update for new WM1811 variantsMark Brown
There are some new WM1811 variants distinguished by both revision and cust_id which need slightly different handling. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22Merge branch 'asoc-omap' into for-3.7Mark Brown
2012-08-22ASoC: omap-mcbsp: Add device tree bindingsPeter Ujfalusi
Device tree support for McBSP modules on OMAP2+ SoC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the codePeter Ujfalusi
We can use the has_ccr flag to replace the cpu_is_omap* checks. This provides future proof implementation and we do not need to update the code if new OMAP revision starts to use the McBSP driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: omap-mcbsp: Remove unused definesPeter Ujfalusi
NUM_LINKS is no longer in use by the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration codePeter Ujfalusi
Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin configuration. When moving to devicetree these callback can no longer be used in a clean way anymore. If a board require to change the 6pin port to work in 4pin setup it needs to set up the mux in the board file. For OMAP2/3: u32 devconf0; /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); For OMAP4: u32 mcbsp_pad; /* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */ mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0); mcbsp_pad |= ((1 << 31) | (1 << 30)); omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0); In case when the kernel is booted with DT blob the pinctrl-single will be provided as soon as it is enabled on the platform. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxingPeter Ujfalusi
The muxing is done at board level, no need to do it in the ASoC machine driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driverPeter Ujfalusi
Move the McBSP CLKS re-parenting code to ASoC driver from arch/arm/mach-omap2. The call fort the re-parenting has been already limited to OMAP2+ SoC in the ASoC driver. There is no longer need to have callback function for it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22ASoC: wm_hubs: Allow configuration of MICBIAS power up delay via pdataMark Brown
Sometimes the analogue circuitry connected to the microphone needs some time to settle after power up. Allow systems to configure this delay in the platform data, the driver will then insert the required delay during power up of paths that involve the microphone. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 21:40:26 +0000