summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2016-12-15ASoC: samsung: add GPIOLIB dependencyFabian Frederick
Both SND_SOC_SMARTQ and SND_SOC_SAMSUNG_TM2_WM5110 use gpio/consumer.h This patch adds GPIOLIB || COMPILE_TEST to Kconfig entries to fix runtime dependency. See commit 638f958baeaf ("extcon: Allow compile test of GPIO consumers if !GPIOLIB") for similar problem and explanations. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-15ASoC: samsung: include gpio consumer.hFabian Frederick
Fix the following build errors on X86_32 !GPIOLIB sound/soc/samsung/tm2_wm5110.c:220:3: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] sound/soc/samsung/tm2_wm5110.c:438:24: error: implicit declaration of function 'devm_gpiod_get' [-Werror=implicit-function-declaration] Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-15ASoC: samsung: smdk_wm8580: remove unused ‘bfs’Vinod Koul
In smdk_hw_params(), 'bfs' is initialized and assigned bits based on params_width, but never used. We could have removed the whole switch case but then driver might be relying on checking bits, so I have kept the case for now. sound/soc/samsung/smdk_wm8580.c: In function ‘smdk_hw_params’: sound/soc/samsung/smdk_wm8580.c:35:6: warning: variable ‘bfs’ set but not used [-Wunused-but-set-variable] int bfs, rfs, ret; Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-12Merge remote-tracking branches 'asoc/topic/wm9712', 'asoc/topic/wm9713' and ↵Mark Brown
'asoc/topic/zte' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/wm8580', 'asoc/topic/wm8753', ↵Mark Brown
'asoc/topic/wm8978', 'asoc/topic/wm9081' and 'asoc/topic/wm9705' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/tlv320aic31xx', ↵Mark Brown
'asoc/topic/topology', 'asoc/topic/uda1380', 'asoc/topic/wm2200' and 'asoc/topic/wm8523' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/stac9766', 'asoc/topic/sti', ↵Mark Brown
'asoc/topic/sti-codec', 'asoc/topic/sunxi' and 'asoc/topic/tegra' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/rt5665', 'asoc/topic/rt5670', ↵Mark Brown
'asoc/topic/rt5677', 'asoc/topic/samsung' and 'asoc/topic/simple' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/rt5514', 'asoc/topic/rt5616', ↵Mark Brown
'asoc/topic/rt5640', 'asoc/topic/rt5660' and 'asoc/topic/rt5663' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rl6347a', ↵Mark Brown
'asoc/topic/rockchip', 'asoc/topic/rt286' and 'asoc/topic/rt298' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/of-graph', 'asoc/topic/pxa', ↵Mark Brown
'asoc/topic/qcom' and 'asoc/topic/rk808' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/inntel', 'asoc/topic/input', ↵Mark Brown
'asoc/topic/max98504' and 'asoc/topic/nau8825' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/dpcm', 'asoc/topic/es8328', ↵Mark Brown
'asoc/topic/extcon' and 'asoc/topic/fsl' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/cs42l42', 'asoc/topic/cs42l56', ↵Mark Brown
'asoc/topic/cs42l73' and 'asoc/topic/cs42xx8' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/compress', 'asoc/topic/const' and ↵Mark Brown
'asoc/topic/cs35l34' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/arizona', ↵Mark Brown
'asoc/topic/atmel', 'asoc/topic/bcm' and 'asoc/topic/bitfield' into asoc-next
2016-12-12Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branch 'asoc/topic/dmaengine' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branch 'asoc/topic/dapm-pin' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branch 'asoc/topic/component' into asoc-nextMark Brown
2016-12-12Merge remote-tracking branches 'asoc/fix/da7219-pops' and 'asoc/fix/qcom' ↵Mark Brown
into asoc-linus
2016-12-12Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2016-12-12ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error pathRichard Fitzgerald
buf was allocated by kzalloc() so it should be passed to kfree() Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-12ASoC: topology: avoid uninitialized kcontrol_typeArnd Bergmann
When num_kcontrols is zero, widget->dobj.widget.kcontrol_type gets set to an uninitialized local variable: sound/soc/soc-topology.c: In function 'soc_tplg_dapm_widget_create': sound/soc/soc-topology.c:1566:36: error: 'kcontrol_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] I could not figure out which of the valid types would be appropriate here, so this sets it to '0', which is invalid but at least well-defined here. There is probably a better way to address the issue. Fixes: eea3dd4f1247 ("ASoC: topology: Only free TLV for volume mixers of a widget") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-08ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT defineShawn Guo
The macro ZX_SPDIF_CLK_RAT should be 2 instead of 4. With this fix, we can get correct audio output on HDMI through SPDIF interface. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-08ASoC: zte: spdif and i2s drivers are not zx296702 specificShawn Guo
ZTE ZX SPDIF and I2S drivers can work on not only ZX296702 but also other ZTE ZX family SoCs like ZX296718, which is an arm64 platform. Let's make a few renaming and tweak the Kconfig a bit to get the drivers available for other ZTE ZX platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-07ASoC: rsnd: setup BRGCKR/BRRA/BRRB when startingKuninori Morimoto
Current rsnd driver setups BRGCKR/BRRA/BRRB when .probe timing. But it breaks sound after Suspend/Resume. These should be setups every start timing. This patch is tested on R-Car Gen3 Salvator-X board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-07ASoC: rsnd: enable/disable ADG when suspend/resume timingKuninori Morimoto
Current rsnd driver enables ADG clock when .probe timing, but it breaks sound after Suspend/Resume. These should be setups every suspend/resume timing too. This patch is tested on R-Car Gen3 Salvator-X board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-07ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_paramsKuninori Morimoto
ssi->usrcnt will be updated on snd_soc_dai_ops::trigger, but snd_pcm_ops::hw_params will be called *before* it. Thus, ssi->usrcnt is still 0 when 1st call. rsnd_ssi_hw_params() needs to check its called count, this means trigger should be if (ssi->usrcnt) instead of if (ssi->usrcnt > 1). Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06dbri: move dereference after check for NULLDan Carpenter
We accidentally introduced a dereference before the NULL check in xmit_descs() as part of silencing a GCC warning. Fixes: 16f46050e709 ("dbri: Fix compiler warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic captureSathyanarayana Nujella
This patch updates FE channel constraints & BE fixup to support quad channel DMIC capture. DMIC pin's BE fixup is configured based on channel input, i.e. either stereo or quad. Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06ASoC: nau8825: disable sinc filter for high THD of ADCJohn Hsu
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD. Therefor, disable the filter when codec initiation for better performance when recording. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL settingAxel Lin
The logic of "value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_XXXXXX;" is unnecessary complex. By setting CS35L34_MCLK_DIV | CS35L34_MCLK_RATE_MASK as the mask for regmap_update_bits() call, what the code does is exactly the same as setting value = CS35L34_MCLK_RATE_XXXXXX. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: Intel: atom: save FW versionSebastien Guiriec
After the boot of the SST FW the firmware version is send back to the driver. This patch is saving the FW version inside the driver. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: Intel: atom: Add sysfs entry in order to store FW versionSebastien Guiriec
This patch is adding a sysfs entry in order to be able to get access to SST FW version. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: cs42l56: Fix misuse of regmap_update_bitsFlorian Vaussard
Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the CS42L56_AIN*_REF_MASK masks, which equal 0x10, 0x20, 0x40 and 0x80. Fix the driver to make it consistent with the API. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: topology: Only free TLV for volume mixers of a widgetMengdong Lin
This patch will check the type of embedded controls for a widget, and only free the TLV of volume mixers. Bytes controls don't have TLV. Just free the private value which is used as struct soc_mixer_control for volume mixers or soc_bytes_ext for bytes controls. No need to cast to these types before freeing it. Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: topology: Allow a widget to have multiple enum controlsMengdong Lin
This patch can create multiple enumerated mixer controls for a widget. Previously topology kernel driver assumes a widget can have only one emumerated mixer control. We need to remove this restriction for Broxton. Its firmware modules (widgets) may need multiple enum controls based on the channel and MIC combination. No ABI change is needed. The ABI allows a widget to embed multiple controls. Reported-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: simple_card_utils: tidyup file comment/defineKuninori Morimoto
simple_card_utils was created as simple_card_core in 1st prototype, and current code still have it. Let's tidyup Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: rsnd: rsnd_get_dalign() needs to care SSIU, not SSIKuninori Morimoto
SSIU was controlled by SSI before, but commit c7f69ab53("ASoC: rsnd: use mod base common method on SSIU") separated it into ssiu.c But, it didn't care about rsnd_get_dalign() for judging SSI_BUSIF_DALIGN register value which changes the stream data order. This function will be called from cmd/src/ssiu now, but current code still cares ssi, not ssiu. This patch fix it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01ASoC: samsung: Add machine driver for Exynos5433 based TM2 boardSylwester Nawrocki
This patch adds the sound machine driver for the TM2 and TM2E boards. Speaker and headphone playback, Main Mic capture, Bluetooth, Voice call and external accessory are supported. Signed-off-by: Inha Song <ideal.song@samsung.com> [k.kozlowski: rebased on 4.1] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> [s.nawrocki: rebased to 4.7, adjustment to the ASoC core changes, removed unused ops and direct calls to the max98504 function, added parsing of "audio-amplifier" and "audio-codec" properties, added TDM API calls, switched to gpiod API] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01Merge branch 'topic/component' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2016-12-01ASoC: add Component level suspend/resumeKuninori Morimoto
In current ALSA SoC, Codec only has suspend/resume feature, but it should be supported on Component level. This patch adds it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01ASoC: core: replace aux_comp_list to component_dev_listKuninori Morimoto
Now, Card has component_dev_list, we can replace aux_comp_list to component_dev_list with new auxiliary flags Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01ASoC: core: replace codec_dev_list to component_dev_list on CardKuninori Morimoto
Current Card has Codec list (= codec_dev_list), but Codec will be removed in the future. Because of this reason, this patch adds new Component list in Card, and replace Codec list. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30ASoC: sun4i-codec: Add support for H3 codecChen-Yu Tsai
The codec on the H3 is similar to the one found on the A31. One key difference is the analog path controls are routed through the PRCM block. This is supported by the sun8i-codec-analog driver, and tied into this codec driver with the audio card's aux_dev. In addition, the H3 has no HP (headphone) and HBIAS support, and no MIC3 input. The FIFO related registers are slightly rearranged. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30ASoC: sun4i-codec: Add support for A23 codecChen-Yu Tsai
The codec in the A23 is similar to the one found on the A31. One key difference is the analog path controls are routed through the PRCM block. This is supported by the sun8i-codec-analog driver, and tied into this codec driver with the audio card's aux_dev. In addition, the A23 does not have LINEOUT, and it does not support headset jack detection or buttons. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:50:34 +0000