summaryrefslogtreecommitdiff
path: root/sound/usb
AgeCommit message (Collapse)Author
2016-10-12ALSA: line6: fix a crash in line6_hwdep_write()Dan Carpenter
The error checking here is messed up so we could end up dereferencing -EFAULT. Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-10ALSA: line6: Fix POD X3 Live audio inputAndrej Krutak
The commit c039aaa77a7d1d9375665a8b59ec16dc7d23e259 was incomplete, missing part of the setup for Live. This makes also audio input work, in addition to audio output. Fixes: c039aaa77a7d1d9375665a8b59ec16dc7d23e259 Reported-by: Eddi De Pieri <eddi@depieri.net> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-29Merge branch 'for-linus' into for-nextTakashi Iwai
2016-09-25ALSA: usb-line6: use the same declaration as definition in header for MIDI ↵Takashi Sakamoto
manufacturer ID Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-23ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variantsAnssi Hannula
The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB). However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device. This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information. Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise. Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: David W <regulars@d-dub.org.uk> Tested-by: David W <regulars@d-dub.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-21ALSA: line6: snd-usb-line6 depends on CONFIG_SND_HWDEPValdis Kletnieks
ERROR: "snd_hwdep_new" [sound/usb/line6/snd-usb-line6.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed make[1]: *** [__modpost] Error 1 Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-20ALSA: line6: fix ifnullfree.cocci warningskbuild test robot
sound/usb/line6/driver.c:484:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci CC: Andrej Krutak <dev@andree.sk> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add hwdep interface to access the POD control messagesAndrej Krutak
We must do it this way, because e.g. POD X3 won't play any sound unless the host listens on the bulk EP, so we cannot export it only via libusb. The driver currently doesn't use the bulk EP messages in other way, in future it could e.g. sense/modify volume(s). Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Cleanup podhd initializationAndrej Krutak
Only initialize PCM for POD HD devices that support it. No POD HD seems to support MIDI, thus drop the initialization. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Only determine control port properties if neededAndrej Krutak
Not all line6 devices use the control port. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3)Andrej Krutak
Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add support for POD X3Andrej Krutak
This includes audio in/out and basic initialization via control EP (emulates what original driver does). The initialization is done similarly to original POD, firmware and serial IDs are read and exported via sysfs. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Allow processing of raw incoming messagesAndrej Krutak
Not all PODs use MIDI via USB data interface, thus allow avoiding that code and instead using direct processing. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP)Andrej Krutak
POD X3 can initialize similarly to older PODs, but it doesn't have the MIDI interface. Instead, configuration is done via proprietary bulk EP messages. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during captureAndrej Krutak
E.g. POD X3 seems to require playback data to be sent to it to generate capture data. Otherwise the device stalls and doesn't send any more capture data until it's reset. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Allow different channel numbers for in/outAndrej Krutak
Changes bytes_per_frame to bytes_per_channel. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Support assymetrical in/out configurationsAndrej Krutak
Splits max_packet_size to max_packet_size_in/out (e.g. for different channel counts). Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add high-speed USB supportAndrej Krutak
This has two parts: * intervals_per_second setup (high speed needs 8000, instead of 1000) * iso_buffers setup (count of iso buffers depends on USB speed, 2 is not enough for high speed) Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Enable different number of URBs for frame transfersAndrej Krutak
This basically changes LINE6_ISO_BUFFERS constant to a configurable iso_buffers property. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-11Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge from for-linus just to make the further development easier.
2016-08-29ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114Ken Lin
Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb-audio: rmove print for failure of kmallocShawn Lin
kmalloc already print similar error once failing to alloc enough memory, so let's remove this dump here. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb: fine-tune Tenor error compensation valueDaniel Mack
Users of devices affected by the Tenor feedback data error report buffer underruns, even with the +/- 0x1.0000 quirk applied. Compensating the error with 0xf000 instead seems to reliably fix that issue. See https://sourceforge.net/p/alsa/mailman/message/35230259/ Reported-and-tested-by: Norman Nolte <norman.nolte@gmx.net> Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb: use TEAC UD-H01 quirk for more devicesDaniel Mack
The quirk seems to be necessary not only for TEAC UD-H01 devices, but to more that are based on the Tenor 8802TL chipset. Devices built by T+A are affected too, and they apparently all use the same USB PID:PID. Extend the quirky handling for that device as well, and rename the quirks flag. Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: usb: move udh01_fb_quirk setting to quirks.cDaniel Mack
That's a quirk, after all, so move it where to all the other quirks live. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: line6: Fix POD sysfs attributes segfaultAndrej Krutak
The commit 02fc76f6a changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6a7db ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: line6: Give up on the lock while URBs are released.Andrej Krutak
Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1e5b2 ('ALSA: line6: Reorganize PCM stream handling') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-22ALSA: line6: Remove double line6_pcm_release() after failed acquire.Andrej Krutak
If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee6dd2 ('ALSA: line6: Handle error from line6_pcm_acquire()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-11ALSA: usb: caiaq: audio: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: usb-audio: Add quirk for ELP HD USB CameraVittorio Gambaletta (VittGam)
The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD ↵Piotr Karasinski
(VF0610) VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by: Piotr Karasinski <peter.karasinski@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-25Merge branch 'for-next' into for-linusTakashi Iwai
Merged 4.8 changes.
2016-07-18ALSA: usb-audio: Fix quirks code is not calledKazuki Oikawa
snd_usb_{set_interface,ctl_msg}_quirk checks chip->usb_id to need calling a quirks code. But existed code path that not calling dev_set_drvdata in usb_audio_probe. Fixes: 79289e24194a ("ALSA: usb-audio: Refer to chip->usb_id for quirks and MIDI creation") Signed-off-by: Kazuki Oikawa <k@oikw.org> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-17ALSA: usb-audio: Change structure initialisation to C99 styleAmitoj Kaur Chawla
To allow for structure randomisation, replace the in order struct initialisation style with explicit field style. The Coccinelle semantic patch used to make this change is as follows: @decl@ identifier i1,fld; type T; field list[n] fs; @@ struct i1 { fs T fld; ...}; @@ identifier decl.i1,i2,decl.fld; expression e; position bad.p, bad.fix; @@ struct i1 i2@p = { ..., + .fld = e - e@fix ,...}; Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-16Merge branch 'for-next' into for-linusTakashi Iwai
2016-05-11ALSA: usb-audio: Yet another Phoneix Audio device quirkTakashi Iwai
Phoenix Audio has yet another device with another id (even a different vendor id, 0556:0014) that requires the same quirk for the sample rate. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10Merge branch 'for-linus' into for-nextTakashi Iwai
2016-05-08ALSA: usb-midi: correct speed checkingOliver Neukum
Allow for SS+ USB devices Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-08ALSA: usb-audio: correct speed checkingOliver Neukum
Allow handling SS+ USB devices correctly. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-29ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)Takashi Iwai
Phoenix Audio MT202pcs (1de7:0114) and MT202exe (1de7:0013) need the same workaround as TMX320 for avoiding the firmware bug. It fixes the frequent error about the sample rate inquiries and the slow device probe as consequence. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117321 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-29ALSA: usb-audio: Limit retrying sample rate readsTakashi Iwai
There are many USB audio devices with buggy firmware that don't react with the sample rate reading properly. This often results in the flood of error messages and slowing down the operation. The sample rate read back is basically only for confirming the sample rate setup, and it's not critically important. As a compromise, in this patch, we stop the sample rate read back once when the device gives errors more than tolerance (twice, as of now). This should improve most of error cases while we still can catch the firmware bugginess. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-26Merge branch 'for-linus' into for-nextTakashi Iwai
For taking back the recent change of HDA HDMI fixes for i915 HSW/BDW. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-14Merge tag 'sound-4.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "We've had a very calm development cycle, so far. Here are the few fixes for HD-audio and USB-audio, all of which are small and easy" * tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix inconsistent monitor_present state until repoll ALSA: hda - Fix regression of monitor_present flag in eld proc file ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s ALSA: sscape: Use correct format identifier for size_t ALSA: usb-audio: Add a quirk for Plantronics BT300 ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320 ALSA: hda - Bind with i915 only when Intel graphics is present
2016-04-12ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB DockKailang Yang
This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-09ALSA: usb-audio: allow clock source validity interruptsDaniel Mack
miniDSP USBStreamer UAC2 devices send clock validity changes with the control field set to zero. The current interrupt handler ignores all packets if the control field does not match the mixer element's, but it really should only do that in case that field is needed to distinguish multiple elements with the same ID. This patch implements a logic that lets notifications packets pass if the element ID is unique for a given device. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-09ALSA: usb-audio: add UAC2 clock sources as mixer controlsDaniel Mack
UAC2 specifies clock sources that optionally have validity controls. This patch exposes them as mixer controls, so they can be read (and at least in theory even be written) by userspace applications in order to make clock selection policy decisions. This implementation does nothing if the device is not UAC2 compliant, or if the clock source does not define said validity control bits. Tested with a miniDSP USBStreamer (0x2752/0x0016). Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-06ALSA: usb-audio: Add a quirk for Plantronics BT300Dennis Kadioglu
Plantronics BT300 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1". This patch adds the USB ID of the BT300 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu <denk@post.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-05Merge tag 'media/v4.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some bug fixes on au0828 and snd-usb-audio: - the au0828+snd-usb-audio MC patch broke several things and produced some race conditions. Better to revert the patches, and re-work on them for a next version - fix a regression at tuner disable links logic - properly handle dev_state as a bitmask" * tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] Revert "[media] media: au0828 change to use Managed Media Controller API" [media] Revert "[media] sound/usb: Use Media Controller API to share media resources" [media] au0828: Fix dev_state handling [media] au0828: fix au0828_v4l2_close() dev_state race condition [media] media: au0828 fix to clear enable/disable/change source handlers [media] v4l2-mc: cleanup a warning [media] au0828: disable tuner links and cache tuner/decoder
2016-04-04ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320Takashi Iwai
Phoenix Audio TMX320 gives the similar error when the sample rate is asked: usb 2-1.3: 2:1: cannot get freq at ep 0x85 usb 2-1.3: 1:1: cannot get freq at ep 0x2 .... Add the corresponding USB-device ID (1de7:0014) to snd_usb_get_sample_rate_quirk() list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-01Merge tag 'sound-4.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes: - a fix in ALSA timer core to avoid possible BUG() trigger - a fix in ALSA timer core 32bit compat layer - a few HD-audio quirks for ASUS and HP machines - AMD HD-audio HDMI controller quirks - fixes of USB-audio double-free at some error paths - a fix for memory leak in DICE driver at hotunplug" * tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Use mod_timer() for rearming the system timer ALSA: hda - fix front mic problem for a HP desktop ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps ALSA: dice: fix memory leak when unplugging ALSA: hda - Apply fix for white noise on Asus N550JV, too ALSA: hda - Fix white noise on Asus N750JV headphone ALSA: hda - Asus N750JV external subwoofer fixup ALSA: timer: fix gparams ioctl compatibility for different architectures
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 11:55:49 +0000