summaryrefslogtreecommitdiff
path: root/sound/usb/caiaq
AgeCommit message (Collapse)Author
2009-06-02ALSA: snd_usb_caiaq: use strlcpyDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: snd_usb_caiaq: clean whitespacesDaniel Mack
Cosmetic changes only, no code change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-27ALSA: snd-usb-caiaq: fix reported elapsed periodsDaniel Mack
Reset the internal period position counter upon stream startup. This fixes initial aplay underruns and problems related to latency picky applications such as pulseaudio. Bumped the version number to 1.3.14. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathesDaniel Mack
Cleanup only, no functional change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14ALSA: snd-usb-caiaq: clean up header includesDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/usb-caiaq' into for-linusTakashi Iwai
2009-03-24Merge branch 'topic/snd_card_new-err' into for-linusTakashi Iwai
2009-03-18ALSA: snd-usb-caiaq: bump version numberDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: snd-usb-caiaq: drop bogus iso packetsDaniel Mack
Drop inbound packets that are smaller than expected. This has been observed at the very beginning of the streaming transaction. And when the hardware is in panic mode (which can only very rarely happen in case of massive EMI chaos), mute the input channels. Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: Mark Hills <mark@pogo.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: snd-usb-caiaq: only warn once on streaming errorsDaniel Mack
Limit the number of printed warnings to one in case of streaming errors. printk() happens to be expensive, especially in code called as often as here. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Increase version number to 1.3.12Mark Hills
Indicates fixes affecting control messages and switching of input mode on Audio 8 DJ and Audio 4 DJ. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Remove duplicate A8DJ controlMark Hills
Remove a duplicate control which causes an error when it is registered, and causes later controls to not be registered. The device does not have a fourth ground lift control. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Do not expose hardware input mode 0 of A4DJMark Hills
In the context of the Audio 4 DJ (when compared to Audio 8 DJ), hardware input mode 0 is not used. Expose modes 1 (line) and 2 (phono) to the user as modes 0 and 1 respectively. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Set default input mode of A4DJMark Hills
Do not start the device with input mode undefined. Mimic the behaviour of the Audio 8 DJ and start in phono input mode. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Send the correct command when setting controlsMark Hills
Fixes a bug where an incorrect command was sent which had no effect on the device. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-16ALSA: snd-usb-caiaq: support for two more audio devicesDaniel Mack
- Added support for two new audio devices from Native Instuments, 'Audio4DJ' and 'GuitarRig mobile' - Add missing statement about 'Session IO' in Kconfig help text - Version number bumped to 1.3.11 Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Return proper error code at probe in sound/usb/*Takashi Iwai
Some drivers in soudn/usb/* don't handle the error code properly from snd_card_create(). This patch fixes these places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in other sound/*Takashi Iwai
Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-09ALSA: caiaq - Version 1.3.10Takashi Iwai
Increase the version number in module info to indicate the fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-08ALSA: caiaq - Fix Oops with MIDITakashi Iwai
The snd-usb-caiaq driver causes Oops occasionally when accessing MIDI devices. This patch fixes the Oops and invalid URB submission errors as well. Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-02ALSA: Use usb_set/get_intfdataJulia Lawall
Use the USB functions usb_get_intfdata and usb_set_intfdata instead of dev_get_drvdata and dev_set_drvdata, respectively. The semantic patch that makes this change for the usb_get_intfdata case is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @header@ @@ #include <linux/usb.h> @same depends on header@ position p; @@ usb_get_intfdata@p(...) { ... } @depends on header@ position _p!=same.p; identifier _f; struct usb_interface*intf; @@ _f@_p(...) { <+... - dev_get_drvdata(&intf->dev) + usb_get_intfdata(intf) ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-27ALSA: snd-usb-caiaq: clean up the control adding codeDaniel Mack
snd-usb-caiaq: clean up the control adding code by moving dulpicate code to a function. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-19[ALSA] snd_usb_caiaq: add support for 'Session I/O' interfaceDaniel Mack
This patch adds suport for Native Instruments new 'Guitar Rig Session I/O' audio hardware. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-21caiaq endianness fixAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24[ALSA] snd_usb_caiaq: make high sample rates work with A8DJDaniel Mack
This patch for snd_usb_caiaq makes sample rates higher dann 48KHz work with devices which have more than 2 stereo input/output pairs. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] snd_usb_caiaq: correct input channel orderDaniel Mack
This patch corrects the input channel order of hardware supported by snd_usb_caiaq. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] snd_usb_caiaq: fix potential lockups lockingDaniel Mack
This patch fixes potential lockups in snd_usb_caiaq by refining the locking mechanims and by using usb_kill_urb() in favor to usb_unlink_urb(). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-22[ALSA] caiaq - fix section mismatch warningSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the function setup_card() to the function .devinit.text:snd_usb_caiaq_control_init() setup_card() are only used by init_card(). init_card() are only used by snd_probe() snd_probe() are used for the .probe parameter in usb_driver.probe Annotate them all __devinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] usb/caiaq: decrease period_bytes_minDaniel Mack
This patch decreases the snd_pcm_hardware->period_bytes_min field in the caiaq/usb audio driver. The hardware can actually handle as few as 128 bytes, depending on the system. So it makes no sense to keep applications from actually using such values. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound: fix caiaq section mismatchesRandy Dunlap
Fix section mismatch in caiaq: these __devinit functions can be called at any time so they should not be __devinit. WARNING: vmlinux.o(.text+0x10a8dae): Section mismatch: reference to .init.text:snd_usb_caiaq_audio_init (between 'setup_card' and 'create_card') WARNING: vmlinux.o(.text+0x10a8dd6): Section mismatch: reference to .init.text:snd_usb_caiaq_midi_init (between 'setup_card' and 'create_card') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb-caiaq - add support for Kore controller 2Daniel Mack
Added support for Native Instrument's Kore controller 2. This device has no audio but MIDI, input devices and ALSA controllers only. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - remove ifdefTakashi Iwai
Remove ifdef and fix Makefile for conditional builds. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - add control API and more input featuresDaniel Mack
- added support for all input controllers on Native Instrument's 'Kore controller'. - added ALSA controls to switch LEDs on 'RigKontrol 2', 'RigKontrol3', 'Audio Kontrol 1' and 'Kore controller'. - added ALSA controls to switch input mode, software lock and ground lift features on 'Audio 8 DJ'. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] caiaq - misc input handling fixesDmitry Torokhov
- link input device with its parent so that it placed in proper spot in sysfs hierarchy - drivers that allow changing their keymaps should use private copy of the keymap so that one instance of a device does not affect another instance - it is preferred for drivers to properly set up input_dev->phys to help userspace locate devices - drivers should use usb_to_input_id(), or perform endianess conversion, themselves, otherwise ID is not correct on big-endian boxes - whitespace and formatting cleanup Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16[ALSA] caiaq - support for Native Instrument's RigKontrol3Daniel Mack
This patch adds support for Native Instrument's upcoming RigKontrol3 sound interface. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] snd_usb_caiaq_input_free() fixKarsten Wiese
input_free_device()'s comment says: input_free_device() should only be used if input_register_device() was not called yet or if it failed. Once device was registered use input_unregister_device() and memory will be freed once last refrence to the device is dropped. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] snd-usb-caiaq: Make playback workKarsten Wiese
some typo fixes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Add Native Instrument usb audio device supportDaniel Mack
Add snd-usb-caiaq driver to support caiaq usb-audio devices from Native Instrument: * Native Instruments RigKontrol2 * Native Instruments Kore Controller * Native Instruments Audio Kontrol 1 * Native Instruments Audio 8 DJ Signed-off-by: Daniel Mack <daniel@caiaq.org> Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 22:27:49 +0000