summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2019-11-18ASoC: qcom: q6asm: add support to flac configSrinivas Kandagatla
Qualcomm DSPs expect flac config to be set for flac decoders, so add the API to program the flac config to the DSP Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191115102705.649976-3-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: rt5677: rt5677_check_hotword() can be statickbuild test robot
Fixes: 21c00e5df439 ("ASoC: rt5677: Enable jack detect while DSP is running") Signed-off-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20191114153304.n4pyix7qadu76tx4@4978f4969bb8 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: ti: davinci-mcasp: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113095445.3211-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: dmaengine: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113095445.3211-2-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: soc-core: care card_probed at soc_cleanup_card_resources()Kuninori Morimoto
soc_cleanup_card_resources() will call card->remove(), but it should be called if card->probe() or card->late_probe() are called. snd_soc_bind_card() might be error before calling card->probe() / card->late_probe(). In that time, card->remove() will be called. This patch adds card_probed parameter to judge it. Fixes: bfce78a559655 ("ASoC: soc-core: tidyup soc_init_dai_link()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/87o8xg4ltr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: soc-core: move snd_soc_unbind_card() next to snd_soc_bind_card()Kuninori Morimoto
To makes code readable, this patch moves snd_soc_unbind_card() next to snd_soc_bind_card(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pnhw4lu5.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: soc-core: call snd_soc_dapm_shutdown() at soc_cleanup_card_resources()Kuninori Morimoto
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. snd_soc_bind_card() is calling snd_soc_dapm_init() for both card and component. Let's call paired snd_soc_dapm_shutdown() at paired soc_cleanup_card_resources(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22c4lub.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: tas2770: clean up an indentation issueColin Ian King
There is a block that is indented too deeply, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191112190218.282337-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: tidyup soc_probe_aux_devices()Kuninori Morimoto
snd_soc_bind_card() is calling many initialize functions for each card / link / dai / aux etc, etc, etc... When error happen, the message is indicated at snd_soc_bind_card(), not at each functions. But, only soc_probe_aux_devices() case is indicating error at functions, not at snd_soc_bind_card(). It is not an issue, but unbalanced. This patch moves error message to snd_soc_bind_card(). Also avoids deep-nested code. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lfsthkw9.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_bind_card() and snd_soc_instantiate_card()Kuninori Morimoto
having both soc_bind_card() and snd_soc_instantiate_card() is very confusable. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mud9hkwj.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge soc_remove_component() and soc_cleanup_component()Kuninori Morimoto
having both soc_remove_component() and soc_cleanup_component() is very confusable. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o8xphkwt.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_remove_dai_link() and soc_unbind_dai_link()Kuninori Morimoto
We don't need to separete snd_soc_remove_dai_link() and soc_unbind_dai_link() anymore. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pni5hkx1.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_add_dai_link() and soc_bind_dai_link()Kuninori Morimoto
We don't need to separete snd_soc_add_dai_link() and soc_bind_dai_link() anymore. Let's merge these. One note is that before this patch, it adds list (A) eventhough if it had dai_link->ignore (1), or already bounded dai_link (2). But I guess it is wrong. This patch also solve this issue. /* BEFORE */ int soc_bind_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... } int snd_soc_add_dai_link(...) { ... => ret = soc_bind_dai_link(...); => if (ret < 0) => return ret; (A) list_add_tail(&dai_link->list, &card->dai_link_list); ... } /* AFTER */ int snd_soc_add_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... (A) list_add_tail(&dai_link->list, &card->dai_link_list); return 0; } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22lhkx8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_unregister_dai() and soc_del_dai()Kuninori Morimoto
We don't need to separete snd_soc_unregister_dai() and soc_del_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87sgn1hkxg.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_register_dai() and soc_add_dai()Kuninori Morimoto
We don't need to separete snd_soc_register_dai() and soc_add_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tv7hhkxm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: remove soc_is_dai_link_bound()Kuninori Morimoto
Because complex separeted "card pre-listed component" and "topology added component" duplicated operation is now becoming simple, we don't need to check already bound dai_link which is not exist anymore. This patch removes soc_is_dai_link_bound(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v9rxhkxw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: topology: free kcontrol memory on errorDragos Tarcatu
The volume and bytes kcontrols are currently not freeing their memory on initialization failures. When an error occurs, all the widgets loaded so far are unloaded via sof_widget_unload(). But this only happens for the widgets that got successfully loaded. Fix that by kfree()-ing the allocated memory on load error. Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222039.19651-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: only suspend to D0I3 when neededKeyon Jie
We should suspend audio to D3 by default, for the sake of power saving, change the condition of D0I3 suspending here to that when there is stream with suspend_ignored specified. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: add helper to check if we should enter d0i3 suspendKeyon Jie
Add helper to check if the DSP should be put in D0i3. This function returns true if a stream has ignored the SUSPEND trigger to keep the pipelines running in the DSP. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: add check before setting d0_substateKeyon Jie
Add check before seeting d0_substate and return success if Audio DSP is already in the target substate. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: add state machine to commentsKeyon Jie
Add Audio DSP state machine with comments. Note that the 'D0<-->runtime D0I3' part is not implemented yet. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: Intel: hda: use fallback for firmware namePierre-Louis Bossart
We have platforms such as CFL with no known I2S codec being used, and the ACPI tables are currently empty, so fall-back to using the firmware filename used in nocodec mode Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: Intel: acpi-match: split CNL tables in threePierre-Louis Bossart
Due to firmware manifest/signature differences, we have to use different firmware names, so split CNL machine table in three (CNL, CFL, CML). The CFL table is currently empty since all known platforms use HDaudio, but let's plan ahead. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: wm8904: configure sysclk/FLL automaticallyMichael Walle
This adds a new mode WM8904_CLK_AUTO which automatically enables the FLL if a frequency different than the MCLK is set. These additions make the codec work with the simple-card driver in general and especially in systems where the MCLK doesn't match the required clock. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191108203152.19098-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraintYu-Hsuan Hsu
On KBL platform, the microphone is attached to external codec(rt5514) instead of PCH. However, TDM slot between PCH and codec is 16 bits only. In order to avoid setting wrong format, we should add a constraint to force to use 16 bits format forever. Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: Add DA7213 audio codec as selectable optionSebastian Reichel
This commit adds the Dialog DA7213 audio codec as a selectable option in the kernel config. Currently the driver can only be selected for Intel Baytrail/Cherrytrail devices or if SND_SOC_ALL_CODECS is enabled. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20191108174843.11227-3-sebastian.reichel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Wait for DSP to boot before loading firmwareCurtis Malainey
Wait for hardware to startup. If we load before hardware is ready we could end up corrupting the firmware. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-12-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Set ADC clock to use PLL and enable ASRCCurtis Malainey
Use the PLL to kept the correct 24M clock rate so frequency shift does not occur when using the DSP VAD. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-11-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: bdw-rt5677: Turn on MCLK1 for DSP via DAPMCurtis Malainey
The RT5677 DSP needs the I2S MCLK1 to run its DSP. Add a dapm route to SSP0 CODEC IN so the clock is turned on automatically when the DSP is turned on. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-10-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Allow VAD to be shut on/off at all timesCurtis Malainey
Due to limitations of the clocking configuration, we have no way of scheduling our hibernation before the bdw dsp hibernates. This causes issues when the system suspends with an open stream. We need userspace to toggle the kcontrol before we are suspended so that any writes on suspend are not lost and we don't corrupt the regmap. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-9-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Disable irq at suspendBen Zhang
The irq is disabled at suspend to avoid running the threaded irq handler after the codec has been powered off. At resume, codec irq is re-enabled and the interrupt status register is checked to see if headphone has been pluggnd/unplugged while the device is suspended. There is still a chance that the headphone gets enabled or disabled after the codec is suspended. disable_irq syncs the threaded irq handler, but soc-jack's threaded irq handler schedules a delayed work to poll gpios (for debounce). This is still OK. The codec won't be powered back on again because all audio paths have been suspended, and there are no force enabled supply widgets (MICBIAS1 is disabled). The gpio status read after codec power off could be wrong, so the gpio values are checked again after resume. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-8-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Stop and restart DSP over suspend/resumeBen Zhang
MCLK1 gets disabled at suspend and re-enabled at resume. Before MCLK1 is re-enabled, if the DSP is already on (either the DSP was left on during suspend, or the DSP is turned on early at resume), i2c register read returns garbage and corrupts the regmap cache. This patch stops the DSP before suspend and restarts it after resume with a dalay to ensure MCLK is on while loading firmware. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-7-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatileBen Zhang
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1 while it's streaming audio over SPI. The DSP firmware turns on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap does not believe that register can change by itself. When BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't read the register first before write, so PLL2 power bit is cleared by accident. Marking MX-64h as volatile in regmap solved the issue. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Add DAPM audio path for hotword streamBen Zhang
Add a DAPM audio path from "DMIC L1" to "DSP Buffer" so that when hotwording is enabled, DAPM does not power off the codec with SND_SOC_BIAS_OFF. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-5-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Enable jack detect while DSP is runningBen Zhang
Before a hotword is detected, GPIO1 pin is configured as IRQ output so that jack detect works. When a hotword is detected, the DSP firmware configures the GPIO1 pin as GPIO1 and drives a 1. rt5677_irq() is called after a rising edge on the GPIO1 pin, due to either jack detect event or hotword event, or both. All possible events are checked and handled in rt5677_irq() where GPIO1 pin is configured back to IRQ output if a hotword is detected. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-4-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM deviceBen Zhang
This link is needed for the RT5677 DSP to do hotwording Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-3-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Load firmware via SPI using delayed workBen Zhang
The firmware rt5677_elf_vad is an ELF binary obtained from request_firmware(). Sections of the ELF are loaded to the DSP via SPI. A model (e.g. en_us.mmap) can optionally be loaded to the DSP at RT5677_MODEL_ADDR to overwrite the baked-in model in rt5677_elf_vad. Then we switch to DSP mode, load firmware, and let DSP run. When a hotword is detected, an interrupt is fired and rt5677_irq() is called. When 'DSP VAD Switch' is turned off, the codec is set back to normal mode. The kcontrol 'DSP VAD Switch' is automatically enabled/disabled when the hotwording PCM stream is opened/closed. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-2-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: fsl_audmix: Add spin lock to protect tdmsShengjiu Wang
Audmix support two substream, When two substream start to run, the trigger function may be called by two substream in same time, that the priv->tdms may be updated wrongly. The expected priv->tdms is 0x3, but sometimes the result is 0x2, or 0x1. Fixes: be1df61cf06e ("ASoC: fsl: Add Audio Mixer CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/1e706afe53fdd1fbbbc79277c48a98f8416ba873.1573458378.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2019-11-08ASoC: SOF: Intel: hda: set L1SEN on S0ix suspendKeyon Jie
Set L1SEN to make sure the system can enter S0ix, and restore it on resume. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191101170916.26517-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-08ASoC: SOF: topology: fix missing NULL pointer checkKeyon Jie
Add check to avoid possible NULL pointer dereference issue. This issue was reported by static analysis tools, we didn't face this issue but we can't rule it out either as a false positive. Reported-by: Keqiao Zhang <keqiao.zhang@intel.com> Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191101170916.26517-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-08ASoC: core: Fix compile warning with CONFIG_DEBUG_FS=nTakashi Iwai
Paper over a compile warning: sound/soc/soc-pcm.c:1185:8: warning: unused variable ‘name’ Fixes: 0632fa042541 ("ASoC: core: Fix pcm code debugfs error") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191107134833.1502-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-06ASoC: SOF: topology: Fix bytes control size checksDragos Tarcatu
When using the example SOF amp widget topology, KASAN dumps this when the AMP bytes kcontrol gets loaded: [ 9.579548] BUG: KASAN: slab-out-of-bounds in sof_control_load+0x8cc/0xac0 [snd_sof] [ 9.588194] Write of size 40 at addr ffff8882314559dc by task systemd-udevd/2411 Fix that by rejecting the topology if the bytes data size > max_size Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-06Merge branch 'for-5.4' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.5
2019-11-06ASoC: soc-core: fixup dead-lock at snd_soc_unregister_component()Kuninori Morimoto
snd_soc_unregister_component() is calling snd_soc_lookup_component() under mutex_lock(). But, snd_soc_lookup_component() itself is using mutex_lock(), thus it will be dead-lock. This patch adds _nolocked version of it, and avoid dead-lock issue. Fixes: ac6a4dd3e9f0("ASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component()") Reported-by: "kernelci.org bot" <bot@kernelci.org>" Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87bltph4da.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-06ASoC: soc-core: fix RIP warning on card removalPierre-Louis Bossart
SOF module load/unload tests show nasty recurring warnings: WARNING: CPU: 5 PID: 1339 at sound/core/control.c:466 snd_ctl_remove+0xf0/0x100 [snd] RIP: 0010:snd_ctl_remove+0xf0/0x100 [snd] This regression was introduced by the removal of the call to soc_remove_link_components() before soc_card_free() is invoked. Go back to the initial order but only call soc_remove_link_components() once. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Fixes: 5a4c9f054ceea ("ASoC: soc-core: snd_soc_unbind_card() cleanup") GitHub issue: https://github.com/thesofproject/linux/issues/1424 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191106145801.9316-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-06ASoC: SOF: topology: Fix bytes control size checksDragos Tarcatu
When using the example SOF amp widget topology, KASAN dumps this when the AMP bytes kcontrol gets loaded: [ 9.579548] BUG: KASAN: slab-out-of-bounds in sof_control_load+0x8cc/0xac0 [snd_sof] [ 9.588194] Write of size 40 at addr ffff8882314559dc by task systemd-udevd/2411 Fix that by rejecting the topology if the bytes data size > max_size Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-05ASoC: soc-core: remove topology specific operationKuninori Morimoto
soc-core has some API which is used from topology, but it is doing topology specific operation at soc-core. soc-core should care about core things, and topology should care about topology things, otherwise, it is very confusable. For example topology type is not related to soc-core, it is topology side issue. This patch removes meaningless check from soc-core. This patch keeps extra initialization/destruction at snd_soc_add_dai_link() / snd_soc_remove_dai_link() which were for topology. From this patch, non-topology card can use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87pni6251h.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-05ASoC: soc-core: call snd_soc_register_dai() from snd_soc_register_dais()Kuninori Morimoto
ALSA SoC has 2 functions. snd_soc_register_dai() is used from topology snd_soc_register_dais() is used from snd_soc_add_component() In general, people think like _dai() is called from _dais() with for loop. But in reality, these are very similar but different implementation. We shouldn't have duplicated and confusing implementation. This patch calls snd_soc_register_dai() from snd_soc_register_dais() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87r22m251l.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-05ASoC: soc-core: don't call snd_soc_dapm_new_dai_widgets() at ↵Kuninori Morimoto
snd_soc_register_dai() ALSA SoC has 2 functions. snd_soc_register_dai() is used from topology snd_soc_register_dais() is used from snd_soc_add_component() In general, people think like _dai() is called from _dais() with for loop. But in reality, these are very similar but different implementation. We shouldn't have duplicated and confusing implementation. snd_soc_register_dai() is now used from topology. But to reduce duplicated code, it should be used from _dais(), too. Because of topology side specific reason, it is calling snd_soc_dapm_new_dai_widgets(), but it is not needed _dais() side. This patch factorizes snd_soc_register_dai() to topology / _dais() common part, and topology specific part. And do topology specific part at soc-topology. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87sgn2251p.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-05ASoC: soc-core: have legacy_dai_naming at snd_soc_register_dai()Kuninori Morimoto
ALSA SoC has 2 functions. snd_soc_register_dai() is used from topology snd_soc_register_dais() is used from snd_soc_add_component() In general, people think like _dai() is called from _dais() with for loop. But in reality, these are very similar but different implementation. We shouldn't have duplicated and confusing implementation. snd_soc_register_dai() is now used from topology. But to reduce duplicated code, it should be used from _dais(), too. To prepare it, this patch adds missing parameter legacy_dai_naming to snd_soc_register_dai(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87tv7i251u.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 06:09:02 +0000