| Age | Commit message (Collapse) | Author |
|---|
|
|
|
'asoc/fix/da7213', 'asoc/fix/free' and 'asoc/fix/jack' into asoc-linus
|
|
|
|
commit 25165f79adc7 ("ASoC: rsnd: enable clock-frequency for both
44.1kHz/48kHz") supported both 44.1kHz/48kHz for AUDIO_CLKOUTx,
but it didn't care its parent clock name.
This patch fixes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Element size in the manifest should be updated for each token, so that the
loop can parse all the string elements in the manifest. This was not
happening when more than two string elements appear consecutively, as it is
not updated with correct string element size. Fixed with this patch.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SKL+ platforms, all IPC commands are serialised, i.e. the driver sends
a new IPC to DSP, only after receiving a reply from the firmware for the
current IPC.
Hence it seems apparent that there is only a single modifier of the IPC RX
List. However, during an IPC timeout case in a multithreaded environment,
there is a possibility of the list element being deleted two times if not
properly protected.
So, use spin lock save/restore to prevent rx_list corruption.
Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 90431eb49bff ("ASoC: rsnd: don't use PDTA bit for 24bit on SSI")
fixups 24bit mode data alignment, but PIO was not cared.
This patch fixes PIO mode 24bit data alignment
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_cleanup_card_resources() call snd_card_free() at the last of its
procedure. This turned out to lead to a use-after-free.
PCM runtimes have been already removed via soc_remove_pcm_runtimes(),
while it's dereferenced later in soc_pcm_free() called via
snd_card_free().
The fix is simple: just move the snd_card_free() call to the beginning
of the whole procedure. This also gives another benefit: it
guarantees that all operations have been shut down before actually
releasing the resources, which was racy until now.
Reported-and-tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
|
|
Initialize asoc_simple_card_init_mic with the correct struct
asoc_simple_jack.
Fixes: 9eac361877b3 ("ASoC: simple-card: add new asoc_simple_jack and use it")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If SSI uses shared pin, some SSI will be used as parent SSI.
Then, normal SSI's remove and Parent SSI's remove
(these are same SSI) will be called when unbind or remove timing.
In this case, free_irq() will be called twice.
This patch solve this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PM functions used in this driver are the ones defined in
sounc/soc/soc-core.c.
When suspending (using snd_soc_suspend), the regcache is marked dirty
but is never synced on resume.
Sync regcache on resume of Atmel ClassD device.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current SSI uses PDTA bit which indicates data that Input/Output
data are Right-Aligned. But, 24bit sound should be Left-Aligned
in this HW. Because Linux is using Right-Aligned data, and HW uses
Left-Aligned data, current 24bit data is missing lower 8bit.
To fix this issue, this patch removes PDTA bit, and shift 8bit
in necessary module
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the SRM lock check section of code the '&' bitwise operator is
used as part of checking lock status. Functionally the code works
as intended, but the conditional statement is a boolean comparison
so should really use '&&' logical operator instead. This commit
rectifies this discrepancy.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Thinkpad Helix 2 is a tablet PC, the audio is powered by Core M
broadwell-audio and rt286 codec. For all versions of Linux kernel,
the stereo output doesn't work properly when earphones are plugged
in, the sound was coming out from both channels even if the audio
contains only the left or right channel. Furthermore, if a music
recorded in stereo is played, the two channels cancle out each other
out, as a result, no voice but only distorted background music can be
heard, like a sound card with builtin a Karaoke sount effect.
Apparently this tablet uses a combo jack with polarity incorrectly
set by rt286 driver. This patch adds DMI information of Thinkpad Helix 2
to force_combo_jack_table[] and the issue is resolved. The microphone
input doesn't work regardless to the presence of this patch and still
needs help from other developers to investigate.
This is my first patch to LKML directly, sorry for CC-ing too many
people here.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=93841
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i915 component framework expects the caller to be invoking
snd_hdac_i915_init() from a thread context. Otherwise it results in
lockups on drm side.
So move the registering of component interface and probing of codecs on
this bus to a worker thread.
init_failed in skl structure is not used currently, so renamed to
init_done and used to track the initialization done in worker thread.
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This typo is quite common. Fix it and add it to the spelling file so
that checkpatch catches it earlier.
Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.12
A quiet release for the core, but lots of new drivers this time around:
- A new, generalized, API for hooking up jacks which makes it easier to
write generic machine drivers for simple cases.
- Continuing fixes for issues with the x86 CPU drivers.
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
DA7213
|
|
For 4.12 merge.
|
|
'asoc/topic/zte-tdm' into asoc-next
|
|
'asoc/topic/unregister', 'asoc/topic/ux500', 'asoc/topic/wm5100' and 'asoc/topic/wm8903' into asoc-next
|
|
'asoc/topic/topology', 'asoc/topic/twl6040' and 'asoc/topic/txx9' into asoc-next
|
|
'asoc/topic/stm', 'asoc/topic/sunxi' and 'asoc/topic/tas2552' into asoc-next
|
|
'asoc/topic/simple', 'asoc/topic/sirf' and 'asoc/topic/ssm4567' into asoc-next
|
|
'asoc/topic/rt5645' and 'asoc/topic/rt5677' into asoc-next
|
|
'asoc/topic/pxa' and 'asoc/topic/qcom' into asoc-next
|
|
'asoc/topic/mtk' and 'asoc/topic/nau8540' into asoc-next
|
|
'asoc/topic/imx' into asoc-next
|
|
'asoc/topic/fsl', 'asoc/topic/fsl-asrc' and 'asoc/topic/fsl-esai' into asoc-next
|
|
'asoc/topic/da7213', 'asoc/topic/dio2125' and 'asoc/topic/dwc' into asoc-next
|
|
'asoc/topic/au1761' and 'asoc/topic/blackfin' into asoc-next
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASoC: Fixes for v4.11
A few last minute fixes for v4.11, the STI fix is relatively large but
driver specific and has been cooking in -next for a little while now:
- A fix from Takashi for some suspend/resume related crashes in the
Intel drivers.
- A fix from Mousumi Jana for issues with incorrectly created
enumeration controls generated from topology files which could cause
problems for userspace.
- Fixes from Arnaud Pouliquen for some crashes due to races with the
interrupt handler in the STI driver.
# gpg: Signature made Wed 26 Apr 2017 00:27:33 KST
# gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0
# gpg: issuer "broonie@kernel.org"
# gpg: key 0D9EACE2CD7BEEBC: no public key for trusted key - skipped
# gpg: key 0D9EACE2CD7BEEBC marked as ultimately trusted
# gpg: key CCB0A420AF88CD16: no public key for trusted key - skipped
# gpg: key CCB0A420AF88CD16 marked as ultimately trusted
# gpg: key 162614E316005C11: no public key for trusted key - skipped
# gpg: key 162614E316005C11 marked as ultimately trusted
# gpg: key A730C53A5621E907: no public key for trusted key - skipped
# gpg: key A730C53A5621E907 marked as ultimately trusted
# gpg: key 276568D75C6153AD: no public key for trusted key - skipped
# gpg: key 276568D75C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [ultimate]
# gpg: aka "Mark Brown <broonie@debian.org>" [ultimate]
# gpg: aka "Mark Brown <broonie@kernel.org>" [ultimate]
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [ultimate]
# gpg: aka "Mark Brown <broonie@linaro.org>" [ultimate]
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [ultimate]
|
|
Bitclk is derived from sysclk using bclk_divs.
Sysclk can be derived in two ways:
(1) directly from MLCK
(2) MCLK via PLL
Commit 3c01b9ee2ab9d0d ("ASoC: codec: wm8960: Relax bit clock
computation")
relaxed bitclk computation when sysclk is directly derived from MCLK.
Lets do the same thing when sysclk is derived via PLL.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The new PLL configuration code triggers a harmless warning:
sound/soc/codecs/wm8960.c: In function 'wm8960_configure_clocking':
sound/soc/codecs/wm8960.c:735:3: error: 'best_freq_out' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
wm8960_set_pll(codec, freq_in, best_freq_out);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/wm8960.c:699:12: note: 'best_freq_out' was declared
here
Fix this by reworking the code such that:
1) When there is no PLL freq available return -EINVAL and make
sure *bclk_idx, *dac_idx, *sysclk_idx are initialized with
invalid values.
2) When there is a PLL freq available initialize *bclk_idx,
*dac_idx and *sysclk_idx with correct values and immediately
return the freq available.
Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search")
Fixes: 303e8954af8d ("ASoC: codec: wm8960: Stop when a matching PLL freq is found")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove initial configuration of Class D gain for 1R and 2L.
Leave them at the chip default.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the name of kcontrols to match up the DAPM
widget controls.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
skl_tplg_add_pipe() returned EEXIST instead of negative EEXIST, so fix that
and handle the return value as well.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With compiler option W=1, we have one more warning in the driver for
'set but unused variable', so remove the unused variable to fix it.
sound/soc/intel/skylake/skl-pcm.c: In function ‘skl_platform_open’:
sound/soc/intel/skylake/skl-pcm.c:954:26: warning: variable ‘runtime’ set but not used [-Wunused-but-set-variable]
struct snd_pcm_runtime *runtime;
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The error handling in bxt_sst_dsp_init() got changed in a way that
it now derefences an uninitialized pointer when printing a warning
about the device not being found:
sound/soc/intel/skylake/bxt-sst.c: In function 'bxt_sst_dsp_init':
sound/soc/intel/skylake/bxt-sst.c:567:14: error: 'skl' may be used uninitialized in this function [-Werror=maybe-uninitialized]
As we do have a valid device pointer available at the call site,
let's use that instead.
Fixes: 9fe9c7119283 ("ASoC: Intel: Skylake: Move sst common initialization to a helper function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We intended to return here. The current code has a static checker
warning because we set "ret" but don't use it.
Fixes: 76c2145ded6b ("ASoC: sti: Add CPU DAI driver for playback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During reset "refactoring" the output configuration was lost.
This commit repairs sound on EDB93XX boards.
Fixes: 9a397f4 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 4.6+
|
|
Designware PCM is an extension to Designware I2S and they are dependent
on each other. For this reason, make Designware PCM a boolean which will
compile with Desigwnare I2S module. The name of the module is not changed
but the name of the files need to be changed.
Also, without this commit we get errors when probbing designware_i2s module
because of unspecified license:
designware_pcm: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
designware_pcm: Unknown symbol __rcu_read_lock (err 0)
designware_pcm: Unknown symbol devm_snd_soc_register_platform (err 0)
designware_pcm: Unknown symbol synchronize_rcu (err 0)
designware_pcm: Unknown symbol __rcu_read_unlock (err 0)
designware_pcm: Unknown symbol snd_soc_set_runtime_hwparams (err 0)
So, this is really needed as a fix.
Fixes: 79361b2b98b7 ("ASoC: dwc: Add PIO PCM extension")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch implements SAI ASoC driver for STM32.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kabylake platform expects modules in a library manifest. After loading
base firmware library manifest is loaded using load library IPC. This is
followed by module load using load multiple modules IPC.
Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com>
Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kabylake uses code loader dma and wait on notification instead of ipc
reply for load library ipc status. So modify the argument of
skl_sst_ipc_load_library to check on flag to wait for ipc reply.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
