summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2017-04-26ASoC: Intel: Skylake: Register dsp_fw_ops for kabylakeSubhransu S. Prusty
For audio kabylake is same as skylake except the module load approach. This patch registers different dsp_fw_ops for kabylake and next patch adds the module load support for kabylake. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26ASoC: Intel: Skylake: Modify arguments to reuse module transfer functionG Kranthi
Kabylake also uses code loader dma for module load and library load. skl_transfer_module can be reused. Modify the arguments to include library index to be passed to lib load ipc and module/lib check to use correct ipc for lib/module load. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26ASoC: Intel: Skylake: Commonize library loadSubhransu S. Prusty
request firmware, strip extended manifest and release library changes are common to kabylake and APL. So move these common code to utils to be reused in later patches for kabylake library load. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26ASoC: Intel: Skylake: Move sst common initialization to a helper functionG Kranthi
Some skl sst context are not dependent of platform and initializing them independently for each platform can lead to errors. So optimize by moving them to a helper function and platform specific init code can call this. Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26ASoC: nau8824: new driverJohn Hsu
Add driver for NAU88L24. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: John Hsu <supercraig0719@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-25Merge tag 'asoc-fix-v4.11-rc7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.11 A few last minute fixes for v4.11, the STI fix is relatively large but driver specific and has been cooking in -next for a little while now: - A fix from Takashi for some suspend/resume related crashes in the Intel drivers. - A fix from Mousumi Jana for issues with incorrectly created enumeration controls generated from topology files which could cause problems for userspace. - Fixes from Arnaud Pouliquen for some crashes due to races with the interrupt handler in the STI driver.
2017-04-25ASoC: tas2552: Propagate the error code in suspend/resumeFabio Estevam
tas2552_suspend() and tas2552_resume() currently always return success, even though they may fail. Fix this behaviour by always propagating the error code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-25ASoC: bytcr_rt5640: log quirk configuration errorsPierre-Louis Bossart
Now that quirks can be overridden with a module parameter, log errors so that non-sensical quirks introduced by mistake are identified. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-25ASoC: bytcr_rt5640: Fix a typo and quirk parameter typeTakashi Iwai
The previous patch for adding the quirk module option had a typo in its info print, which results in a weird output. Also, the parameter type should be rather unsigned int instead of signed int. Fixes: 9f2cf73ed65b ("ASoC: bytcr_rt5640: Allow quirk set via module option") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-25Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/topology' and ↵Mark Brown
'asoc/fix/sti' into asoc-linus
2017-04-25ASoC: intel: Fix PM and non-atomic crash in bytcr driversTakashi Iwai
The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # v4.1+
2017-04-24ASoC: wm5100: fix spelling mistake: "micropone" -> "microphone"Colin Ian King
Trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: bytcr_rt5640: Allow quirk set via module optionTakashi Iwai
The bytcr-rt5640 driver has a few quirk setups depending on the board, where the quirk value is set by DMI matching. When you have a new device to add the support, you often experience to try the different quirk by trial-and-error. Or, you may have a development model that still has no proper DMI string. In either case, you'd need to compile the driver at each time. This patch introduces a module option to override the quirk value on the fly. User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to override the default value without recompilation. It's a raw value, so user needs to check the source code for the meaning of each bit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: Call snd_soc_set_dmi_name() unconditionallyTakashi Iwai
Since recently UCM can pick up a configuration specific to the board via card longname field, and we introduced a helper function snd_soc_set_dmi_name() for that. So far, it was used only in one place (sound/soc/intel/boards/broadwell.c), but it should be more widely applied. This patch puts a big hammer for that: it lets snd_soc_register_card() calling snd_soc_set_dmi_name() unconditionally, so that all x86 devices get the better longname string. This would have no impact for other systems without DMI support, as snd_soc_set_dmi_name() is no-op on them. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: Provide a dummy wrapper of snd_soc_set_dmi_name()Takashi Iwai
For systems without DMI, it makes no sense to have the code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: imx-wm8962: Remove global variablesFabio Estevam
Currently the following variables are global: - card_priv, sample_rate and sample_format ,which is not a good idea as it prevents the usage of multiple instances. Make sample_rate and sample_format part of the imx_priv structure and allocate imx_priv via the standard devm_kzalloc() mechanism inside the probe function. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: samsung: Add Odroid ASoC machine driverSylwester Nawrocki
This dedicated driver allows to support SoC specific clock settings and helps to ensure proper number of channels gets negotiated in multicodec system configurations. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: qcom: move clock names into LPASS variant structLinus Walleij
The clock names for the two supported codecs are either "mi2s-*" name variants generated by code. This naming scheme does not work for platforms like MSM8660 which has I2S channels named CODEC_I2S_SPKR (rather than just "MI2S tertiary" and other repetitive names) and consequently have clocks named "codec-i2s-spkr-osr-clk" and similar. Skip the runtime generation of clock names and replace it with name lookup tables encoded into the variant data. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: cs35l35: Allow user to configure IMON SCALECharles Keepax
On the chip the IMON signal is a full 24-bits however normally only some of the bits will be sent over the bus. The chip provides a field to select which bits of the IMON will be sent back, this is the only feedback signal that has this feature. Add an additional entry to the cirrus,imon device tree property to allow the IMON scale parameter to be passed. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: Intel: Skylake: Fix a couple user after free bugsDan Carpenter
We need to use the _safe() version of list_for_each_entry() here because of the kfree(modules). Fixes: b8c722ddd548 ("ASoC: Intel: Skylake: Add support for deferred DSP module bind") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: fsl_asrc_dma: use correct direction enum typeStefan Agner
The direction argument is of type enum dma_transfer_direction, and not enum dma_data_direction. The enumeration values are the same so this did not had an effect in practise. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: mediatek: add I2C dependency for CS42XX8Arnd Bergmann
We should not select drivers that depend on I2C when that is disabled, as it results in a build error: warning: (SND_SOC_MT2701_WM8960) selects SND_SOC_WM8960 which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && I2C) sound/soc/codecs/wm8960.c:1469:1: error: data definition has no type or storage class [-Werror] sound/soc/codecs/wm8960.c:1469:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] Fixes: 8625c1dbd876 ("ASoC: mediatek: Add mt2701-wm8960 machine driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: Intel: Skylake: Uninitialized variable in probe_codec()Dan Carpenter
My static checker complains that if snd_hdac_bus_get_response() returns -EIO then "res" is uninitialized. Fix this by initializing it to -1 so that the error is handled correctly. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: rsnd: Fix possible NULL pointer dereferenceMarek Vasut
25165f79adc76b812bfb4d8f2ab120aafb28d0e6 ("ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz") supports both 44.1kHz/48kHz clock-frequency settings for ADG which will be used for AUDIO_OLKOUTn. But some board doesn't need it, thus, it is not mandatory. But, above patch didn't care about the case of "clock-frequency" DT property was not present. This patch ignores ADG settings if AUDIO_OLKOUTn was not used. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> [Kuninori: tidyup not to break non AUDIO_OLKOUTn case] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: rsnd: fix semicolon.cocci warningskbuild test robot
sound/soc/sh/rcar/adg.c:462:54-55: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHzKuninori Morimoto
Current clock-frequency allows only 1 clock, but ADG can handle both 44.1kHz/48kHz base clocks. This patch enables these. On Salvator-X board, AUDIO_CLKOUT which is generated by ADG is connected to ak4613 MCKI, and it should be synchronized with LRCK. Thus, we need both 44.1kHz/48kHz base clock-frequency. Otherwise, either one sounds strange in high frequency sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19ASoC: rsnd: rsnd_mod_make_sure() is not under DEBUGKuninori Morimoto
rsnd_mod_make_sure() will be used any situation, thus, under DEBUG is not realistic. This patch move it to non DEBUG area Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19ASoC: ak4613: use snd_soc_update_bits() to avoid Reserve bit on I/O CTRLKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: cs35l35: Correct some register defaultsCharles Keepax
Correct some minor errors in the register defaults. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: topology: use j for internal loop counterColin Ian King
Currently variable i is being for 2 nested for loops. Fix this by using integer loop counter j for the inside for loop. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirkNicole Faerber
The Thinkpad Tablet tablet has a similar audio setup as the Intel Braswell platform. A quirk is needed to detect the platform and setup the platform data properly: Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 Signed-off-by: Nicole Faerber <nicole.faerber@id3p.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: Intel: Atom: update Thinkpad 10 quirkPierre-Louis Bossart
There are multiple skews of the same Lenovo audio hardware based on the Realtek RT5670 codec. Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 For all these devices, the same quirk is used to force the machine driver to be based on RT5670 instead of RT5640 as indicated by the BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Tested-by: Nicole Faerber <nicole.faerber@dpin.de> Tested-by: Viacheslav Ostroukh <v.dev@ostroukh.me> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: nau8540: fix tab conversion problemJohn Hsu
Fix the tab converting to space problem. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14ASoC: rt5514: Unconfuse the rt5514 at probe / resume timeDouglas Anderson
The rt5514 can get confused and incorrectly detect a start bit if the SCL/SDA lines happen to both go low and then high again. This situation has been seen to happen at reboot time and is also theoretically possible during suspend/resume if the rt5514 keeps power but we shut down the i2c connection. When this happens the rt5514 is confused about the state of the i2c bus and won't recognize its own address. That will lead to the rt5514 incorrectly NAKing the first transfer. A single i2c transfer to any address should be enough to get the rt5514 out of this funky state. It is currently believed that this problem should be fixed in the rt5514 driver itself because it seems that the i2c controller in the rt5514 is easily confused. Most i2c devices wouldn't detect a start bit in this case. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14ASoC: rt5514: Avoid relying on uninitialized "val" valueDouglas Anderson
In rt5514_i2c_probe() if the regmap_read(RT5514_VENDOR_ID2) fails then "val" may be left as uninitialized. Current code relies on "val" not being RT5514_DEVICE_ID, but that's potentially unsafe. Let's check for errors from regmap_read() and also explicitly init the value do we're not passing a possibly uninitialized int to printk. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14ASoC: rt5514: Mark rt5514_i2c_driver as staticDouglas Anderson
There's no reason for rt5514_i2c_driver to be non-static. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12ASoC: Intel: Skylake: Add support for deferred DSP module bindJeeja KP
Module at the end of DSP pipeline that needs to be connected to a module in another pipeline are represented as a PGA(leaf node) and in PGA event handler these modules are bound/unbounded. Modules other than PGA leaf can be connected directly or via switch to a module in another pipeline. Example: reference path. To support the deferred DSP module bind, following changes are done: o When the path is enabled, the destination module that needs to be bound may not be initialized. If the module is not initialized, add these modules in a deferred bind list. o When the destination module is initialized, check for these modules in deferred bind list. If found, bind them. o When the destination module is deleted, Unbind the modules. o When the source module is deleted, remove the entry from the deferred bind list. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12ASoC: fsl_esai: Remove unneeded definitionFabio Estevam
There is no need for defining FSL_ESAI_RATES locally as the standard SNDRV_PCM_RATE_8000_192000 definition can be used instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12Merge branch 'for-linus' into for-nextTakashi Iwai
2017-04-11ASoC: hisilicon: Use devm_snd_soc_register_componentJohn Stultz
Per feedback from Mark Brown, this patch updates the hi6210-i2s driver to use devm_snd_soc_register_component which simplifies the logic a bit. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11ASoC: hisilicon: Address style nit to use break in final default of switch ↵John Stultz
statement Mark Brown suggested a style change to use break in the final default of a switch statement, so this patch addresses that. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11ASoC: hisilicon: Add error returns even for cases that shouldn't happen.John Stultz
This patch addresses feedback from Mark Brown, adding a few extra error returns in cases that shouldn't happen Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11ASoC: tas2552: Return the real error codeFabio Estevam
In the case of error in tas2552_codec_probe() we should better propagate the real error code instead of always returning '-EIO'. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11ASoC: topology: Fix to store enum text valuesMousumi Jana
Add missing enum texts store in soc_enum. Signed-off-by: Mousumi Jana <mousumix.jana@intel.com> Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Kranthikumar, GudishaX <gudishax.kranthikumar@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11ASoC: rt5665: move rt5665_set_jack_detect to .set_jackBard Liao
Now, we can use .set_jack callback function on codec level. So we don't need export rt5665_set_jack_detect. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11Merge branch 'topic/jack' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rt5665
2017-04-10ASoC: sgtl5000: Allow LRCLK pad drive strength to be changedFabio Estevam
Introduce the "lrclk-strength" property to allow LRCLK pad drive strength to be changed via device tree. When running a stress playback loop test on a mx6dl wandboard channel swap can be noticed on about 10% of the times. While debugging this issue I noticed that when probing the SGTL5000 LRCLK pin with the scope the swap did not happen. After removing the probe the swap started to happen again. After changing the LRCLK pad drive strength to the maximum value the issue is gone. Same fix works on a mx6dl Colibri board as well. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10ASoC: jack: add snd_soc_codec_set_jackBard Liao
There are many codecs with the capability of jack detection. Usually, we create a jack on machine driver but there is no common function for machine driver to deliver the jack pointer to codec driver. snd_soc_codec_set_jack can be used for delivering the jack pointer to codec driver and enable the jack detection function. To make it work, codec driver need to define a callback function to receive the jack pointer and do all necessary procedure for enabling jack detection. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10ASoC: hisilicon: Add hi6210 i2s audio driverAndy Green
Add driver for hi6210 i2s controller found on hi6220 boards. Signed-off-by: Andy Green <andy.green@linaro.org> [jstultz: Forward ported to mainline, fairly major rework based on suggestions from Mark Brown] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10ASoC: fsl_ssi: Use the tolower() functionFabio Estevam
Code can be simplified by using the standard tolower() funtion. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Timur Tabi <timur@tabi.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 02:26:27 +0000