summaryrefslogtreecommitdiff
path: root/sound/soc/ux500
AgeCommit message (Collapse)Author
2020-07-23ASoC: ux500: use asoc_substream_to_rtd()Kuninori Morimoto
Now we can use asoc_substream_to_rtd() macro, let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v9ij0yv9.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-10ASoC: ux500: ux500_msp_i2s: Remove unused variables 'reg_val_DR' and ↵Lee Jones
'reg_val_TSTDR' Looks like these have been unchecked since the driver's inception in 2012. Fixes the following W=1 kernel build warning(s): sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_rx’: sound/soc/ux500/ux500_msp_i2s.c:398:6: warning: variable ‘reg_val_DR’ set but not used [-Wunused-but-set-variable] sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_tx’: sound/soc/ux500/ux500_msp_i2s.c:415:6: warning: variable ‘reg_val_TSTDR’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Roger Nilsson <roger.xr.nilsson@stericsson.com> Cc: Sandeep Kaushik <sandeep.kaushik@st.com> Link: https://lore.kernel.org/r/20200709162328.259586-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-12ASoC: ux500: mop500: Fix some refcounted resources issuesChristophe JAILLET
There are 2 issues here: - if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()' is a no-op because the 'mop500_dai_links' structure has not been initialized yet, so the referenced are not decremented - The reference stored in 'mop500_dai_links[i].codecs' is refcounted only once in the probe and must be decremented only once. Fixes: 39013bd60e79 ("ASoC: Ux500: Dispose of device nodes correctly") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: ux500: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/871rpjir34.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-21ASoC: ux500: ux500_msp_dai: remove unused DAI .suspend/.resumeKuninori Morimoto
This patch removes unused DAI driver .suspend/.resume Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v9p7x7io.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-04ASoC: ux500: Remove redundant variable "status"zhong jiang
local variable "status" is not used. hence it is safe to remove and just return 0. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Link: https://lore.kernel.org/r/1572528855-25990-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ux500: mop500: consider CPU-Platform possibilityKuninori Morimoto
commit 9ae6cdb184b6 ("ASoC: ux500: mop500: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 9ae6cdb184b6 ("ASoC: ux500: mop500: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26Merge tag 'v5.2-rc6' into asoc-5.3Mark Brown
Linux 5.2-rc6
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19ASoC: ux500: mop500: don't select unnecessary PlatformKuninori Morimoto
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06ASoC: ux500: mop500: use modern dai_link styleKuninori Morimoto
ASoC is now supporting modern style dai_link (= snd_soc_dai_link_component) for CPU/Codec/Platform. This patch switches to use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10ASoC: ux500: add MODULE_LICENSE tagArnd Bergmann
This adds MODULE_LICENSE/AUTHOR/DESCRIPTION tags to the ux500 platform drivers, to avoid these build warnings: WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-plat-dma.o WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-mach-mop500.o The company no longer exists, so the email addresses of the authors don't work any more, but I've added them anyway for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-01Merge remote-tracking branches 'asoc/topic/twl6040', 'asoc/topic/txx9', ↵Mark Brown
'asoc/topic/utils', 'asoc/topic/ux500' and 'asoc/topic/wm8523' into asoc-next
2017-08-21ASoC: ux500: Remove unnecessary function callDonglin Peng
First of all,the address of pdev->dev is assigned to mop500_card.dev, then the function platform_set_drvdata copies the value the variable card to pdev->dev.driver_data,but when calling snd_soc_register_card, the function dev_set_drvdata(card->dev, card) will also do the same copy operation,so i think that the former copy operation can be removed. Signed-off-by: Peng Donglin <dolinux.peng@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-18ASoC: ux500: constify snd_soc_dai_ops structuresArvind Yadav
snd_soc_dai_ops are not supposed to change at runtime. All functions working with snd_soc_dai_ops provided by <sound/soc-dai.h> work with const snd_soc_dai_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17ASoC: ux500: Restore platform DAI assignmentsJohan Hovold
This reverts commit f1013cdeeeb9 ("ASoC: ux500: drop platform DAI assignments"), which seems to have been based on a misunderstanding and prevents the platform driver callbacks from being made (e.g. to preallocate DMA memory). The real culprit for the warnings about attempts to create duplicate procfs entries was commit 99b04f4c4051 ("ASoC: add Component level pcm_new/pcm_free" that broke PCM creation on systems that use more than one platform component. Fixes: f1013cdeeeb9 ("ASoC: ux500: drop platform DAI assignments") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable <stable@vger.kernel.org> # 4.11
2017-03-07ASoC: ux500: Added blank line after declarationsCodrut Grosu
This was reported by checkpatch.pl Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: ux500: Remove unuseful break after returnCodrut Grosu
This was reported by checkpatch.pl Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: ux500: Added */ to the next lineCodrut Grosu
This was reported by checkpatch.pl Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06ASoC: ux500: drop platform DAI assignmentsLinus Walleij
This platform is completely probed by device tree nowadays, so we need to do a bigger cleanup removing all the non-DT codepaths. This cleanup must however go in as a fix since it fixes a regression. Currently when Ux500 audio is enabled, dmesg complains like this: entry->name == "prealloc" entry->name == "prealloc_max" entry->name == "prealloc" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346 proc_register+0xf0/0x110 proc_dir_entry 'sub0/prealloc' already registered (...) entry->name == "prealloc_max" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346 proc_register+0xf0/0x110 proc_dir_entry 'sub0/prealloc_max' already registered (...) snd-soc-mop500 soc:sound: ab8500-codec-dai.0 <-> 80124000.msp mapping ok entry->name == "prealloc" entry->name == "prealloc_max" entry->name == "prealloc" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346 proc_register+0xf0/0x110 proc_dir_entry 'sub0/prealloc' already registered (...) entry->name == "prealloc_max" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346 proc_register+0xf0/0x110 proc_dir_entry 'sub0/prealloc_max' already registered snd-soc-mop500 soc:sound: ab8500-codec-dai.1 <-> 80125000.msp mapping ok This is because PCMs are created twice for the same hardware, and this happens because both "platform" and "CPU" DAI links are specified. But platform/CPU is an either/or pair, not a both/and pair. This has maybe worked in the past, but it is causing trouble now, so let us begin the cleanups by removing the platform assignment and silencing the boot noise, and make a proper DT cleanup for the next kernel cycle. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-03ASoC: ux500: fix spelling mistake "Unsopported" -> "Unsupported"Colin Ian King
Trivial fix to spelling mistakes in dev_err messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23Merge branch 'topic/hw-constraint-single' into for-nextTakashi Iwai
2015-10-21ASoC: ux500: Use snd_pcm_hw_constraint_single()Lars-Peter Clausen
Use the new snd_pcm_hw_constraint_single() helper function instead of calling snd_pcm_hw_constraint_minmax() with the same value for min and max to install a constraint that limits the possible configuration values to a single value. Using snd_pcm_hw_constraint_single() makes the indented result clearer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-14ASoC: ux500: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14ASoC: mop500: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-20ASoC: ux500: adjust devm usageJulia Lawall
The explicit call to devm_regulator_put in the probe and remove functions does not seem to be necessary. In particular, the functions prcmu_qos_remove_requirement and ux500_msp_i2s_cleanup_msp in the remove function seem to do nothing that can interfere with devm_regulator_put, making it safe to allow devm_regulator_put to occur after the end of the remove function. Convert the calls to clk_get to devm_clk_get, and remove the corresponding calls to clk_put in the probe and remove functions. Replace various gotos by direct returns, and drop unneeded labels. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown
2015-05-21ASoC: mop500_ab8500: Add a NULL pointer check in mop500_ab8500_machine_init()Rajan Vaja
Avoid possible crash (NULL pointer dereference) by making sure that dem_kzalloc() is successful. Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: dmaengine_pcm: Make FLAG_NO_RESIDUE internalLars-Peter Clausen
Whether residue can be reported or not is not a property of the audio controller but of the DMA controller. The FLAG_NO_RESIDUE was initially added when the DMAengine framework had no support for describing the residue reporting capabilities of the controller. Support for this was added quite a while ago and recently the DMAengine framework started to complain if a driver does not describe its capabilities and a lot of patches have been merged that add support for this where it was missing. So it should be safe to assume that driver on actively used platforms properly implement the DMA capabilities API. This patch makes the FLAG_NO_RESIDUE internal and no longer allows audio controller drivers to manually set the flag. If a DMA driver against expectations does not support reporting its capabilities for now the generic DMAengine PCM driver will now emit a warning and simply assume that residue reporting is not supported. In the future this might be changed to aborting with an error. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-12ASoC: mop500_ab8500: Use card DAPM context to access widgetsLars-Peter Clausen
The dapm field of the snd_soc_codec struct will eventually be removed (replaced with the DAPM context from the component embedded inside the CODEC). Replace its usage with the card's DAPM context. The idea is that DAPM is hierarchical and with the card at the root it is possible to access widgets from other contexts through the card context. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07ASoC: mop500_ab8500: Use snd_soc_runtime_set_dai_fmt()Lars-Peter Clausen
Use snd_soc_runtime_set_dai_fmt() to configure the format for the DAI link rather than configuring each DAI individually. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-03ASoC: mop500: Deletion of unnecessary checks before the function call ↵Markus Elfring
"of_node_put" The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10ASoC: simple-card: Remove useless castsJean-Francois Moine
There is no need to cast the cpu_of_node or codec_of_node of the dai_links when calling of_put_node. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20ASoC: ux500: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-20ASoC: mop500_ab8500: Replace instances of rtd->codec->card with rtd->cardLars-Peter Clausen
No need to go via the CODEC to get a pointer to the card. This will help to eventually remove the card field from the snd_soc_codec struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: ux500: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: ux500: Fix sparse non static symbol warningWei Yongjun
Fixes the following sparse warning: sound/soc/ux500/ux500_msp_i2s.c:649:5: warning: symbol 'ux500_msp_i2s_of_init_msp' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Dramatically reduce the size of the DAI driver data structLee Jones
We no longer have a means to differentiate between MSP devices at probe time, mainly because we don't really have to. So rather than have an over- sized static data structure in place, where the only difference between devices is the ID and name (which are unused), we'll just create one succinct, statically assigned and shared one instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Differentiate between pdata and DT initialisationLee Jones
If booting with full DT support (i.e. DMA too, the last piece of the puzzle), then we don't need to use the compatible_request_channel call back or require some of the historical bumph which probably isn't required by a platform data start-up now either. This will also be ripped out in upcoming commits. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Take out pointless dev_dbg() callLee Jones
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT caseLee Jones
In this patch we do two things. Firstly, instead of open coding the store of DMA data in to the DAI for later use, we use the API provided. Secondly we create and store similar DMA data for the DT case, only this time we use 'struct snd_dmaengine_dai_dma_data' which is provided by the core for this very reason. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Extend Device Tree support to deal with DMA dataLee Jones
Soon we will strip out pdata support from the Ux500 set of ASoC drivers. When this happens it will have to supply a DMA slave_config to the dmaengine. At the moment a great deal of this comes from pdata via AUXDATA. We need to become independent of this soon. This patch starts the process by allocating memory for the associated data structures and fetches the MSP id used for const struct indexing. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Expect different saved DMA data when obtaining from DAI storeLee Jones
In preparation for full Device Tree enablement we must differentiate between the two varying ways DMA data can be held in the DAI store. If we're booting with Device Tree the provided 'snd_dmaengine_dai_dma_data' data structure shall be used, whereas in order to avoid breaking legacy platform data we also need to be able to translate DMA data stored using the UX500 specific 'ux500_msp_dma_params' method. Once we move over to solely use Device Tree, we can enforce the use of 'snd_dmaengine_dai_dma_data' and this code can be removed altogether. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Stop pretending that we support varying address widthsLee Jones
The Slave Config's addr_width attribute is populated by data_width of dma_cfg, which in turn is derived from dma_params' data_size attribute and that comes from the slot_width which is always 16 bits (2 Bytes). We're cutting out the middle man here and just setting the DMA Slave Config directly. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: Ux500: Match platform by device node when booting Device TreeLee Jones
We're getting closer to fully enabling the Ux500 ASoC driver for Device Tree. When we switch over from using AUXDATA we'll need to match platform by only Device Tree nodes. In this patch we NULL out the platform_name, and supply nodes for each platform device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Provide better checking for Device Tree and/or Platform DataLee Jones
These drivers will not work without platform specific data, which is passed in via Device Tree or Platform Data. To avoid the chance of NULL pointer dereferencing and alike, let's ensure we have at least one of the methods in play before continuing. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ARM: ux500: Don't use enums for MSP IDs - for easy DT conversionLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>