summaryrefslogtreecommitdiff
path: root/sound/soc/soc-dapm.c
AgeCommit message (Collapse)Author
2012-11-09ASoC: dapm: Use card_list during DAPM shutdownMisael Lopez Cruz
DAPM shutdown incorrectly uses "list" field of codec struct while iterating over probed components (codec_dev_list). "list" field refers to codecs registered in the system, "card_list" field is used for probed components. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-26ASoC: dapm: Allow regulators to bypass as well as disable when idleMark Brown
Allow regulators managed via DAPM to make use of the bypass support that has recently been added to the regulator API by setting a flag SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will be put into bypass mode before being disabled, allowing the regulator to fall into bypass mode if it can't be disabled due to other users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Merge tag 'v3.6-rc6' into for-3.7Mark Brown
Linux 3.6-rc6 has all our bug fixes. Conflicts (trivial overlap): sound/soc/omap/am3517evm.c
2012-09-18ASoC: Avoid recalculating the bitmask for SOC_ENUM controlsLars-Peter Clausen
For ENUM controls the bitmask is calculated based on the number of items. Currently this is done each time the control is accessed. And while the performance impact of this should be negligible we can easily do better. The roundup_pow_of_two macro performs the same calculation which is currently done manually, but it is also possible to use this macro with compile time constants and so it can be used to initialize static data. So we can use it to initialize the mask field of a ENUM control during its declaration. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: dapm: Ensure bypass paths are suspended and resumedMark Brown
Since bypass paths aren't part of DAPM streams and we may not have any DAPM streams there may not be anything that triggers a DAPM sync for them. Mark all input and output widgets as dirty and then sync to do so at the end of suspend and resume. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-08-25ASoC: dapm: Don't force card bias level to be updatedMark Brown
Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) means that any DAPM context being updated will have the bias level automatically set, including the card. We can't safely do this as the card callbacks are called for each device context and so the management of the card bias is more complex. Several multi-component cards rely on this behaviour. Skip updates during the asynchronous run entirely. We should really do them in the synchronous section but it's not 100% clear which values to pick as the different DAPM contexts may have different bias levels. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: dapm: Make sure we update the bias level for CODECs with no opMark Brown
Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) ensures that we update non-CODEC DAPM contexts but means that if a CODEC has no set_bias_level() operation it'll not be updated. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The most important feature of this patch set is the new async infrastructure that makes sure async_synchronize_full() synchronizes all domains and allows us to remove all the hacks (like having scsi_complete_async_scans() in the device base code) and means that the async infrastructure will "just work" in future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi, megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in sas and FC. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) [SCSI] Revert "[SCSI] fix async probe regression" [SCSI] cleanup usages of scsi_complete_async_scans [SCSI] queue async scan work to an async_schedule domain [SCSI] async: make async_synchronize_full() flush all work regardless of domain [SCSI] async: introduce 'async_domain' type [SCSI] bfa: Fix to set correct return error codes and misc cleanup. [SCSI] aacraid: Series 7 Async. (performance) mode support [SCSI] aha152x: Allow use on 64bit systems [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning [SCSI] bfa: squelch lockdep complaint with a spin_lock_init [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED [SCSI] ufs: reverse the ufshcd_is_device_present logic [SCSI] ufs: use module_pci_driver [SCSI] usb-storage: update usb devices for write cache quirk in quirk list. [SCSI] usb-storage: add support for write cache quirk [SCSI] set to WCE if usb cache quirk is present. [SCSI] virtio-scsi: hotplug support for virtio-scsi [SCSI] virtio-scsi: split scatterlist per target ...
2012-07-23Merge branch 'for-3.5' into for-3.6Mark Brown
2012-07-23ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvementsMark Brown
Ever since the DAPM performance improvements we've been marking all widgets as not dirty after each DAPM run. Since _PRE and _POST events aren't part of the DAPM graph this has rendered them non-functional, they will never be marked dirty again and thus will never be run again. Fix this by skipping them when marking widgets as not dirty. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@vger.kernel.org
2012-07-20[SCSI] async: introduce 'async_domain' typeDan Williams
This is in preparation for teaching async_synchronize_full() to sync all pending async work, and not just on the async_running domain. This conversion is functionally equivalent, just embedding the existing list in a new async_domain type. The .registered attribute is used in a later patch to distinguish between domains that want to be flushed by async_synchronize_full() versus those that only expect async_synchronize_{full|cookie}_domain to be used for flushing. [jejb: add async.h to scsi_priv.h for struct async_domain] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-13ASoC: dapm: Fix compilation warningMarek Belisko
Fix following: sound/soc/soc-dapm.c: In function ‘dapm_clock_event’: sound/soc/soc-dapm.c:1021:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06ASoC: dapm: Allow routes to be deleted at runtimeMark Brown
Since we're now relying on DAPM for things like enabling clocks when we reparent the clocks for widgets we need to either use conditional routes (which are expensive) or remove routes at runtime. Add a route removal API to support this use case. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-06ASoC: dapm: Mark widgets as dirty when a route is addedMark Brown
If we add a new route at runtime then we'll need to recheck the connections to the affected widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-06ASoC: dapm: Make sure all dapm contexts are updatedLiam Girdwood
Make sure we set the bias level for all DAPM contexts when changing level. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06ASoC: dapm: Fix locking during codec shutdownLiam Girdwood
Codec shutdown performs a DAPM power sequence that might cause conflicts and/or race conditions if another stream power event is running simultaneously. Use card's dapm mutex to protect any potential race condition between them. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-07-03ASoC: dapm: Fix dapm_set_path_status() connectBenoît Thébaudeau
dapm_set_path_status() sets connect incorrectly in the case max > 1 with invert. In that case, the raw disconnect value should be max, which corresponds to the userspace value 0. This use case currently does not appear upstream, but it could break SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future. This patch completes commit 3a9abe8. Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <alsa-devel@alsa-project.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03ASoC: dapm: Remove incomplete stereo codeBenoît Thébaudeau
Stereo is not yet supported by dapm widgets, so remove stereo code from snd_soc_dapm_get_volsw(), and warn if stereo controls are detected. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-29ASoC: dapm: Fix snd_soc_dapm_put_volsw() connectBenoît Thébaudeau
snd_soc_dapm_put_volsw() sets connect incorrectly in the case max > 1 with invert. In that case, the raw disconnect value should be max, which corresponds to the userspace value 0. This use case currently does not appear upstream, but it could break SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25Merge tag 'v3.5-rc4' into for-3.6Mark Brown
Linux 3.5-rc4 contains some bug fixes which overlap with new features.
2012-06-23ASoC: dapm: Try to add all routes even if one failsMark Brown
We may as well print as many errors as we can in one go rather than requiring developers to iterate through all their typos. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-08ASoC: dapm: Fix input list to use source widgetsLiam Girdwood
We should only add source widgets to the input list. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05ASoC: dapm: The clock API is even less consistent than thoughtMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04ASoC: dapm: Bodge for lack of a widely available clk APIMark Brown
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-04ASoC: dapm: Fix connected widget capture path query.Liam Girdwood
Make sure we check the correct path for capture. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04ASoC: dapm: Use devm_clk_get()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03ASoC: core: Add widget SND_SOC_DAPM_CLOCK_SUPPLYOla Lilja
Adds a supply-widget variant for connection to the clock-framework. This widget-type corresponds to the variant for regulators. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge tag 'v3.4-rc7' into for-3.5Mark Brown
Linux 3.4-rc7 Conflicts): drivers/base/regmap/regmap.c (overlap with bug fixes) sound/soc/blackfin/bf5xx-ssm2602.c (overlap with bug fixes)
2012-04-27ASoC: dapm: Move CODEC<->CODEC params off stackMark Brown
Reduce our stack consumption by moving the params off the stack, they are reasonably large and might be an issue on platforms with small stacks. Reported-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Ackeded-by: Liam Girdwood <lrg@ti.com>
2012-04-26Merge tag 'sound-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A workaround for an ASUS laptop and a few ASoC changes; most of the commits are tagged for stable, too." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8994: Improve sequencing of AIF channel enables ALSA: HDA: Add external mic quirk for Asus Zenbook UX31E ASoC: fsi: update for dmaengine prep_slave_sg fallout. ASoC: core: Fix card RTD count for deferred probe. ASoC: cs42l73: don't use negative array index ASoC: dapm: Ensure power gets managed for line widgets
2012-04-26ASoC: dpcm: Add runtime dynamic route updateLiam Girdwood
This patch allows DPCM to dynamically alter the FE to BE PCM links at runtime based on mixer setting updates. DAPM is looked up after every mixer update and we perform a DPCM runtime update if the mixer has a change of value. This patchs adds/changes the following :- o Adds DPCM runtime update core. o Changes soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() to return if a change has occured rather than 0. No other users check atm. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18ASoC: dapm: Add API call to query valid DAPM pathsLiam Girdwood
In preparation for ASoC DSP support. Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path. This will be used by the DSP core to determine the runtime DAI mappings between FE and BE DAIs in order to run PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16ASoC: soc-dapm: Use '%llx' with 'u64' type.Fabio Estevam
Fix the following build warning: sound/soc/soc-dapm.c: In function 'snd_soc_dai_link_event': sound/soc/soc-dapm.c:2913: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'u64' '%llx' should be used with 'u64' type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16ASoC: core: Support transparent CODEC<->CODEC DAI linksMark Brown
Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-16ASoC: dapm: Allow DAI widgets to be routed throughMark Brown
In order to allow CODEC<->CODEC links to function we will need to allow DAPM paths to be created that pass through DAIs rather than only ones that are source or sunk at the DAI. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-15ASoC: dapm: release lock on error pathsDan Carpenter
We added locking here but there were a couple error paths where we forgot to drop the lock before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-12ASoC: dapm: Ensure power gets managed for line widgetsMark Brown
Line widgets had not been included in either the power up or power down sequences so if a widget had an event associated with it that event would never be run. Fix this minimally by adding them to the sequences, we should probably be doing away with the specific widget types as they all have the same priority anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-04-09Merge tag 'v3.4-rc2' into for-3.5Mark Brown
Linux 3.4-rc2 contains some bug fixes we need, including the addition of an export for regcache_sync_region().
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-01ASoC: dapm: Remove bodges for no-widget CODECsMark Brown
Now that we're creating widgets for all DAIs there should be no more need for the bodges we've been carrying for non-DAPM CODEC drivers so remove them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-01ASoC: dapm: Only lock CODEC for I/O if not using regmapMark Brown
If we do use regmap then regmap will take care of things for us. We actually already have this check at a higher level for the current users but this makes sure we do the right thing in the future too if we need to. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-01ASoC: DAPM: Make sure DAPM widget IO ops hold the component mutexLiam Girdwood
Currently not all DAPM widget IO ops are holding their component mutex (codec or platform). Make sure this is now held for DAPM widget IO operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Add regulator member to struct dapm_widgetLiam Girdwood
Currently DAPM widgets use the private data for their regulator. Add a regulator * for widgets to use instead of private data. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Rename dapm mutex subclass to better match usageLiam Girdwood
Rename SND_SOC_DAPM_CLASS_PCM to SND_SOC_DAPM_CLASS_RUNTIME to better match the usage and align with card mutex too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Add platform stream event supportLiam Girdwood
Currently stream events are only perfomed on codec stream widgets only. There is now a need to be able to perform stream events on platform widgets too. e.g. we have the ABE platform driver with several DAI links to dummy codecs. We need to be able to perform stream events on any of the dummy codec DAI links. This patch also removes the snd_soc_dai * parameter since it's already contained within the rtd * parameter. Finally makle stream event return void since no one checks it anyway. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: lock mixer & mux update power with DAPM mutexLiam Girdwood
Both snd_soc_dapm_mux_update_power() and snd_soc_dapm_mixer_update_power() can be called internally within DAPM core (with DAPM mutex held) and externally. Provide some wrappers so that external users of both functions do not have to remember to hold the DAPM mutex. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Use DAPM mutex for DAPM ops instead of codec mutexLiam Girdwood
It has now become necessary to use a DAPM mutex instead of the codec mutex to lock the DAPM operations. This is due to the recent multi component support and forth coming Dynamic PCM updates. Currently we lock DAPM operations with the codec mutex of the calling RTD context. However, DAPM operations can span the whole card context and all components. This patch updates the DAPM operations that use the codec mutex to now use the DAPM mutex PCM subclass for all DAPM ops. We also add a mutex subclass for DAPM init and PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-18Merge branch 'topic/asoc' into for-linusTakashi Iwai
2012-03-12ASoC: Revert widget I/O locking for 3.4Mark Brown
The widget locking depends on some of the other locking changes which are queued up for 3.5 not 3.4 so revert the locking changes and reapply them in 3.5. This reverts commit 66bf93212f19548f5ed221356b2d70189cc18254 and 96acc357bedad69fbc94d1b923a960af5a411c6f. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-07ASoC: dapm: Only lock CODEC for I/O if not using regmapMark Brown
If we do use regmap then regmap will take care of things for us. We actually already have this check at a higher level for the current users but this makes sure we do the right thing in the future too if we need to. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 16:28:24 +0000