summaryrefslogtreecommitdiff
path: root/sound/soc/intel
AgeCommit message (Collapse)Author
2017-03-15ASoC: Intel: Skylake: Fix not to stop src pipe in pre pmd event handlerGuneshwor Singh
If the widget is a mixin module, just unbind between source and sink and don't stop the source pipe as there can be multiple sinks connected. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipeJeeja KP
DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Enable bytcht_nocodec machine driverPierre-Louis Bossart
Make sure this machine driver is only used if enabled explicitly and if there is no information found in the SSDT. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S accessPierre-Louis Bossart
Add card with dummy codec and DAI to make I2S signals observable. Uses Mic and Speaker pins/widgets to control DAPM Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driverPierre-Louis Bossart
Add entries in HID table and reference to bytcht_da7213 driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: add machine driver for BYT/CHT + DA7213Pierre-Louis Bossart
Add new machine driver, tested with Ard-Audio-DA7212 [1] connected to MinnowBoardMAX Turbot. The MCLK is managed by the codec driver using the "mclk" handle to reuse existing code, but it could just as well be handled by this machine driver. [1] http://www.dialog-semiconductor.com/content/ard-audio-da7212 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13ASoC: Intel: Skylake: code cleanup for pin fixup limitationTakashi Sakamoto
As a commit 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") describes, 'fixups is applied to pin 0 only'. On the other hand, the commit left some codes as what they were. This might confuses readers. This commit fixes the issue. This doesn't change driver behaviour at all. Fixes: 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08ASoC: Intel: Skylake: use a helper macro to rounding-up calculationTakashi Sakamoto
In 'include/linux/kernel.h', there's a helper macro to round numerical value. Let's use it. Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: Skylake: fix invalid memory access due to wrong reference of ↵Takashi Sakamoto
pointer In 'skl_tplg_set_module_init_data()', a pointer to 'params' member of 'struct skl_algo_data' is calculated, then casted to (u32 *) and assigned to a member of configuration data. The configuration data is passed to the other functions and used to process intel IPC. In this processing, the value of member is used to get message data, however this can bring invalid memory access in 'skl_set_module_params()' as a result of calculation of a pointer for actual message data. (sound/soc/intel/skylake/skl-topology.c) skl_tplg_init_pipe_modules() ->skl_tplg_set_module_init_data() (has this bug) ->skl_tplg_set_module_params() (sound/soc/intel/skylake/skl-messages.c) ->skl_set_module_params() ((char *)param) + data_offset This commit fixes the bug. Fixes: abb740033b56 ("ASoC: Intel: Skylake: Add support to configure module params") Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # v4.5+
2017-03-07ASoC: Intel: bxtn: optimize ROM init retriesJeeja KP
During S3->S0 transition, sometime ROM init fails because of authentication engine loads later than the OS. In this case driver waits for a longer period and then retries the FW download causing huge delay in resume time of audio device. To avoid this, ROM INIT wait time is set to a optimal value and increased the retries for firmware download. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bxtn: Store the FW/Library context at bootJeeja KP
Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: bdw-rt5677: Use devm_gpiod_get()Andy Shevchenko
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get() and apply proper flags. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: Intel: Skylake: fix spelling mistake: "allocationf" -> "allocation"Colin Ian King
Trivial fix to spelling mistake in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-19Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2017-02-19Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2017-02-17ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add Geminlake IDsVinod Koul
Geminilake is next gen SoC, so add the IDs for Geminilake. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Check device type to get endpoint configurationSenthilnathan Veppur
Geminilake has two different devices connected to the same SSP, so use device_type check to get correct device configuration. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add jack port initialize in rt286 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: bxt: Create ASoC jack for hdmi in bxt_da7219_max98357 machineJeeja KP
Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in bxt_da7219_max98357 machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: bxt: Create ASoC jack for hdmi in bxt_rt298 machineJeeja KP
Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in bxt_rt298.c machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Create ASoC jack for hdmi in nau88l25_ssm4567 machineJeeja KP
Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in skl_nau88l25_ssm4567 machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Create ASoC jack for hdmi in skl_nau88l25_max98357a ↵Jeeja KP
machine Creates ASoC jack for HDMI PCM and calls hdmi codec API to initialize jack in skl_nau88l25_max98357a machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Create ASoC jack for hdmi in rt286 machineJeeja KP
Creates ASoC jack for HDMI pcm and calls hdmi codec API to initialize jack in skl_rt268 machine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-08ASoC: Intel: Skylake: Add route change to nau88l25_ssm4567 machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in nau88l25_ssm4567 machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-08ASoC: Intel: Skylake: Add route change to nau88l25_max98357a machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in nau88l25_max98357a machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-08ASoC: Intel: bxt: Add route change to rt298 machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in bxt_rt298 machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: Skylake: Report Platform ID info from NHLTSubhransu S. Prusty
This patch create entry in sysfs file system to report the platform_id = "pci-id-oem_id-oem_table_id-oem_revision" for board identification. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: bxt: add channel map support in bxt_da7219_max98357a machineJeeja KP
HDMI registers channel map controls per PCM. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which also registers channel map in the late probe callback handler. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: bxt: Add route change to da7219_max98357a machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in bxt_da7219_max98357a machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: Skylake: Add route change to rt286 machineJeeja KP
To support MST moved pin to port, this changes the routes based on port. So change the route in skl_rt286 machine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-04ASoC: Intel: bxt: add channel map support in rt298 machineJeeja KP
HDMI registers channel map controls per pcm. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which registers channel map in the late probe callback handler. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-01ASoC: cht-bsw-rt5645: fix unused variable compiler warningPierre-Louis Bossart
Missed unused variable in previous changes, oops. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht-bsw-rt5645: fix DAI formatsPierre-Louis Bossart
Remove default and set I2S mode correctly both on codec and cpu sides Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: add support for ALC3270 codecPierre-Louis Bossart
Use ACPI ID 10EC3270 to load machine driver for cht-bsw-rt5645 and add reference to 3270 to use the rt5645 mode Tested on Asus T100HA Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht-bsw-rt5645: select ASRC source based on routing quirkPierre-Louis Bossart
Some platforms use AIF2, use routing information to set ASRC as needed Suggested-by: Bard Liao <bardliao@realtek.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht-bsw-rt5645: add quirks for SSP0/AIF1/AIF2 routingPierre-Louis Bossart
This driver may be used on Baytrail CR platforms where SSP2 is not available. Add quirks and routing detection based on work done for RT5640. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: Baytrail: add quirk for Lenovo Thinkpad 10Pierre-Louis Bossart
the BIOS reports this codec as RT5640 but it's a rt5670. Use the quirk mechanism to use the cht_bsw_rt5672 machine driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht_bsw_rt5645: harden ACPI device detectionPierre-Louis Bossart
Fix classic issue of having multiple codecs listed in DSDT but a single one actually enabled. The previous code did not handle such errors and could also lead to uninitalized configurations Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: Atom: add machine driver for baytrail-rt5645 hardwarePierre-Louis Bossart
Use machine driver initially defined for CherryTrail Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: rt5645: add support for RT5648Pierre-Louis Bossart
add ACPI ID 10EC5648 found e.g on Asus X205TA and use rt5645 driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: add support for Realtek 5651 on CherrytrailPierre-Louis Bossart
RT5651 is used on some Cherrytrail platforms, add the ACPI ID in machine table. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156191 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: Atom: Add HP Pavilion x2 10-p000 machine entryAlexandrov Stansilav
Add machine entry for HP X2 Pavilion 10-p100. This notebook contains rt5640 codec, but with ACPI ID "10EC3276". Signed-off-by: Alexandrov Stansilav <neko@nya.ai> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: cht_bsw_rt5645: add Baytrail MCLK supportPierre-Louis Bossart
The existing code assumes a 19.2 MHz MCLK as the default hardware configuration. This is valid for CherryTrail but not for Baytrail. Add explicit MCLK configuration to set the 19.2 clock on/off depending on DAPM events. This is a prerequisite step to enable devices with Baytrail and RT5645 such as Asus X205TA Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31Merge branch 'fix/intel' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2017-01-31ASoC: Intel: atom: fix frame polarityPierre-Louis Bossart
The current frame sync polarity definitions are inconsistent in the Atom/DPCM driver, fix to align with regular ASoC definitions and update code in platform and machine drivers for RT5640 and RT5651. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: boards: remove .pm_ops in all Atom/DPCM machine driversPierre-Louis Bossart
This patch corrects an omission in bytcr_rt5640 and bytcr_rt5651. All existing machine drivers shall not use .pm_ops to avoid a double suspend, as initially implemented by 3f2dcbeaeb2b ("ASoC: Intel: Remove soc pm handling to allow platform driver handle it"). Reported-by: Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 02:33:45 +0000