summaryrefslogtreecommitdiff
path: root/sound/soc/fsl
AgeCommit message (Collapse)Author
2016-05-05ASoC: fsl_sai: Allow setting the SAI MCLK directionFabio Estevam
On mx6ul the General Purpose Register 1 (GPR1) contains the following bits for configuring the direction of the SAI MCLKs: SAI1_MCLK_DIR, SAI2_MCLK_DIR, SAI3_MCLK_DIR Introduce the "fsl,sai-mclk-direction-output" optional property to allow configuring the SAI_MCLK outputs. Tested on a imx6ul-evk board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-05ASoC: fsl_sai: Introduce a compatible string for MX6ULFabio Estevam
MX6UL may need to configure the General Purpose Register 1 (GPR1), so it is better to add a new compatible string to differentiate. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29ASoC: fsl_ssi: add CCSR_SSI_SOR to volatile register listCaleb Crome
The CCSR_SSI_SOR is a register that clears the TX and/or the RX fifo on the i.MX SSI port. The fsl_ssi_trigger writes this register in order to clear the fifo at trigger time. However, since the CCSR_SSI_SOR register is not in the volatile list, the caching mechanism prevented the register write in the trigger function. This caused the fifo to not be cleared (because the value was unchanged from the last time the register was written), and thus causes the channels in both TDM or simple I2S mode to slip and be in the wrong time slots on SSI restart. This has gone unnoticed for so long because with simple stereo mode, the consequence is that left and right are swapped, which isn't that noticeable. However, it's catestrophic in some systems that require the channels to be in the right slots. Signed-off-by: Caleb Crome <caleb@crome.org> Suggested-by: Arnaud Mouiche <arnaud.mouiche@invoxia.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-13ASoC: fsl: imx-pcm-fiq: use correct format specifierHeinrich Schuchardt
Documentation/printk-formats.txt has size_t: use %zu or %zx runtime->dma_bytes is of type size_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-18Merge tag 'sound-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514" * tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits) ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation ALSA: mixart: silence an uninitialized variable warning ALSA: usb-audio: Add sanity checks for endpoint accesses ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk() ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() ALSA: hda - Limit i915 HDMI binding only for HSW and later ALSA: hda - Fix unconditional GPIO toggle via automute ALSA: mixart: silence unitialized variable warnings ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda ASoC: rsnd: add simplified module explanation ASoC: hdac_hdmi: Add broxton device ID ASoC: Intel: Bxtn: Add Broxton PCI ID ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops ASoC: Intel: add dmabuffer to common sst_dsp ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core ASoC: Intel: Skylake: Fix whitepsace issues ASoC: Intel: Skylake: Move module id defines ...
2016-03-14Merge branch 'mm-pat-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull dma_*_writecombine rename from Ingo Molnar: "Rename dma_*_writecombine() to dma_*_wc() This is a tree-wide API rename, to move the dma_*() write-combining APIs closer in name to their usual API families. (The old API names are kept as compatibility wrappers to not introduce extra breakage.) The patch was Coccinelle generated" * 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
2016-03-13Merge remote-tracking branches 'asoc/topic/fsl-sai', 'asoc/topic/fsl-ssl', ↵Mark Brown
'asoc/topic/hdac' and 'asoc/topic/max9867' into asoc-next
2016-03-13Merge remote-tracking branches 'asoc/topic/davinci', 'asoc/topic/fsl-card' ↵Mark Brown
and 'asoc/topic/fsl-mpc5200' into asoc-next
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-22ASoC: fsl_ssi: remove explicit register defaultsMaciej S. Szmigiero
There is no guarantee that on fsl_ssi module load SSI registers will have their power-on-reset values. In fact, if the driver is reloaded the values in registers will be whatever they were set to previously. However, the cache needs to be fully populated at probe time to avoid non-atomic allocations during register access. Special case here is imx21-class SSI, since according to datasheet it don't have SACC{ST,EN,DIS} regs. This fixes hard lockup on fsl_ssi module reload, at least in AC'97 mode. Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support MEGA Fast") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-22ASoC: fsl_ssi: Go back to explicit register defaultsFabio Estevam
Commit 5c408fee2546 ("ASoC: fsl_ssi: remove explicit register defaults") causes the driver to fail to probe: fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW fsl-ssi-dai 2028000.ssi: Failed to init register map fsl-ssi-dai: probe of 2028000.ssi failed with error -22 , so revert this commit. Reported-by: Mika Penttilä <mika.penttila@nextfour.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10Merge remote-tracking branches 'asoc/fix/imx-spdif', 'asoc/fix/mtk', ↵Mark Brown
'asoc/fix/mxs-saif', 'asoc/fix/qcom' and 'asoc/fix/rt286' into asoc-linus
2016-02-05ASoC: fsl-asoc-card: add cs4271 and cs4272 supportFelipe F. Tonello
add cs4271 and cs42727 support for fsl-asoc-card Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: fsl-asoc-card: Don't add DAPM routes for ASRC if it doesn't existNicolin Chen
There are a pair of warnings when ASRC is absent in the DTB: fsl-asoc-card sound: ASoC: no source widget found for ASRC-Playback fsl-asoc-card sound: ASoC: Failed to add route ASRC-Playback -> direct -> CPU-Playback fsl-asoc-card sound: ASoC: no sink widget found for ASRC-Capture fsl-asoc-card sound: ASoC: Failed to add route CPU-Capture -> direct -> ASRC-Capture This is because the driver is still trying to add DAPM routes for ASRC even if it doesn't exist on that platform. The warnings are harmless but it might be annoying. So this patch drops the DAPM routes of ASRC when it's absent in the DAI link. Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ASoC: imx-spdif: Fix crash on suspendLars-Peter Clausen
When registering a ASoC card the driver data of the parent device is set to point to the card. This driver data is used in the snd_soc_suspend()/resume() callbacks. The imx-spdif driver overwrites the driver data with custom data which causes snd_soc_suspend() to crash. Since the custom driver is not used anywhere simply deleting the line which sets the custom driver data fixes the issue. Fixes: 43ac946922b3 ("ASoC: imx-spdif: add snd_soc_pm_ops for spdif machine driver") Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-25ASoC: fsl_ssi: remove explicit register defaultsMaciej S. Szmigiero
There is no guarantee that on fsl_ssi module load SSI registers will have their power-on-reset values. In fact, if the driver is reloaded the values in registers will be whatever they were set to previously. However, the cache needs to be fully populated at probe time to avoid non-atomic allocations during register access. Special case here is imx21-class SSI, since according to datasheet it don't have SACC{ST,EN,DIS} regs. This fixes hard lockup on fsl_ssi module reload, at least in AC'97 mode. Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support MEGA Fast") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: fsl-mpc5200: Use usleep_range() instead of msleep()Xiubo Li
Since msleep() will sleep longer than intended time for values less than 20ms, this patch allows the use of usleep_range for just 1ms. usleep_range is a finer precision implementation of msleep and is designed to be a drop-in replacement for udelay where a precise sleep/busy-wait is unnecessary. More details see Documentation/timers/timers-howto.txt. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: fsl_sai: Use usleep_range() instead of msleep()Xiubo Li
Since msleep() will sleep longer than intended time for values less than 20ms, this patch allows the use of usleep_range for just 1ms. usleep_range is a finer precision implementation of msleep and is designed to be a drop-in replacement for udelay where a precise sleep/busy-wait is unnecessary. More details see Documentation/timers/timers-howto.txt. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-11Merge remote-tracking branches 'asoc/topic/fsl-asrc' and ↵Mark Brown
'asoc/topic/fsl-ssi' into asoc-next
2016-01-11Merge remote-tracking branches 'asoc/topic/bcm2835' and 'asoc/topic/cleanup' ↵Mark Brown
into asoc-next
2016-01-10ASoC: fsl_ssi: mark some registers preciousMaciej S. Szmigiero
Mark some registers precious since their reads have side effects (like clearing flags). Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-10ASoC: fsl_ssi: mark SACNT register volatileMaciej S. Szmigiero
SACNT register should be marked volatile since its WR and RD bits are cleared by SSI after completing the relevant operation. This unbreaks AC'97 register access. Fixes: 05cf237972fe ("ASoC: fsl_ssi: Add driver suspend and resume to support MEGA Fast") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05ASoC: fsl_asrc: sound is wrong after suspend/resumeZidan Wang
The register ASRCFG is volatile, but some bits need to be recovered after suspend/resume. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-24ASoC: twl6040, fsl: use to_platform_deviceGeliang Tang
Use to_platform_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23Merge remote-tracking branches 'asoc/topic/fsl-spdif', 'asoc/topic/img' and ↵Mark Brown
'asoc/topic/intel' into asoc-next
2015-12-23Merge remote-tracking branches 'asoc/topic/dpcm', 'asoc/topic/dwc', ↵Mark Brown
'asoc/topic/fsl', 'asoc/topic/fsl-asrc' and 'asoc/topic/fsl-esai' into asoc-next
2015-12-23Merge remote-tracking branches 'asoc/topic/atmel-classd', 'asoc/topic/const' ↵Mark Brown
and 'asoc/topic/da7218' into asoc-next
2015-12-23Merge remote-tracking branch 'asoc/topic/pcm-list' into asoc-nextMark Brown
2015-12-23Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', ↵Mark Brown
'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus
2015-12-23ASoC: fsl-asoc-card: use different route map for AC'97 modeMaciej S. Szmigiero
fsl_ssi uses different stream names ("AC97 Playback" / "AC97 Capture") in AC'97 mode so in this case fsl-asoc-card route map should also be using them. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23ASoC: fsl_asrc: add support for 8-30kHz output sample rateZidan Wang
Add 8kHz, 11.025kHz, 16kHz, 22.05kHz output sample rate support. According referance menual, "Limited support for the case when output sampling rates is between 8kHz and 30kHz. The limitation is the supported ratio (Fsin/Fsout) range as between 1/24 to 8." Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23ASoC: imx-pcm-dma: add NULL testJulia Lawall
Add NULL test on call to devm_kzalloc. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ * x = devm_kzalloc(...); ... when != x == NULL *x // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: fsl_sai: fix no frame clk in master modeZidan Wang
After several open/close sai test with ctrl+c, there will be I/O error. The SAI can't work anymore, can't recover. There will be no frame clock. With adding the software reset in trigger stop, the issue can be fixed. This is a hardware bug/errata and reset is the only option. According to the reference manual, the software reset doesn't reset any control register but only internal hardware logics such as bit clock generator, status flags, and FIFO pointers. (Our purpose is just to reset the clock generator while the software reset is the only way to do that.) Since slave mode doesn't use the clock generator, only apply the reset procedure to the master mode. For asynchronous mode, TX will not be reset when RX is still running. In this case, i can't reproduce this issue. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: fsl: use correct format string for dma_addr_tArnd Bergmann
We get a warning for the imx-pcm-fiq driver when CONFIG_LPAE is enabled on ARM, because dma_addr_t is 64-bit then: sound/soc/fsl/imx-pcm-fiq.c: In function 'snd_imx_pcm_mmap': sound/soc/fsl/imx-pcm-fiq.c:223:107: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] This changes the printk to use the correct format string for printing a dma_addr_t. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', ↵Mark Brown
'asoc/fix/fsl', 'asoc/fix/fsl-sai' and 'asoc/fix/intel' into asoc-linus
2015-11-25ASoC: fsl_asrc: spba clock is needed by asrc deviceShengjiu Wang
ASRC need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to ASRC registers Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: fsl_spdif: spba clk is needed by spdif deviceShengjiu Wang
SPDIF need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to SPDIF registers. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: fsl_esai: spba clock is needed by esai deviceShengjiu Wang
ESAI need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to ESAI registers. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: fsl: using params_width function to simplify codeZidan Wang
using params_width function to simplify code. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25Merge branch 'topic/fsl-sai' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl
2015-11-25ASoC: fsl_sai: add tdm slots operation supportZidan Wang
Add tdm slots operation support. If tdm slots and slot width have been configured in machine driver, we should use these values. Otherwise, using relevant channels and word length to set slots and slot width. SAI will generate BCLK depends on sample rate, slots and slot width. And there may be unused BCLK cycles before each LRCLK transition. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: fsl: clarify ac97 dependencyArnd Bergmann
A new randconfig build failure shows that the fsl-asoc-card module must not be built-in when the AC97 driver is a loadable module: sound/built-in.o: In function `fsl_asoc_card_late_probe': :(.text+0x571d8): undefined reference to `snd_ac97_update_bits' I couldn't come up with a nice solution, so this adds another dependency on "X || !X", which is the Kconfig way of saying that we have an optional dependency on something that might be a loadable module. Fixes: 50760cad9de9 ("ASoC: fsl-asoc-card: add AC'97 support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20ASoC: fsl-asoc-card: Update the rtd queryVinod Koul
sound card rtd was an array and was updated to a list so update the driver to use a list Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: Vendor drivers get a link's runtime by snd_soc_get_pcm_runtime()Mengdong Lin
Vendor drivers no longer access a DAI link's runtime by the link index but by matching the link name via snd_soc_get_pcm_runtime(). We assume each DAI link has a unique name. This is preparation for changing runtimes from an array to a list later. Vendor drivers changed: sound/soc/fsl/fsl-asoc-card.c sound/soc/fsl/imx-wm8962.c sound/soc/pxa/mioa701_wm9713.c sound/soc/samsung/bells.c sound/soc/samsung/littlemill.c sound/soc/samsung/odroidx2_max98090.c sound/soc/samsung/snow.c sound/soc/samsung/speyside.c sound/soc/samsung/tobermory.c sound/soc/tegra/tegra_wm8903 Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-17ASoC: fsl-sai: set xCR4/xCR5/xMR for SAI master modeZidan Wang
For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4), RCR5(TCR5) and RMR(TMR) for playback(capture), or there will be sync error sometimes. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-17ASoC: fsl-sai: don't set bclk for Tx/Rx Synchronous with another SAI modeZidan Wang
In fsl_sai_set_bclk function, we should not set bclk for Tx/Rx Synchronous with another SAI mode. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: fsl_ssi: using macro for default register mapZidan Wang
using macro for default register map Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: fsl_spdif: STL and STR registers are non volatileZidan Wang
STL and STR registers are writable and not readable. So they are non volatile. Remove them from volatile list, and add default register value for them. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: fsl-sai: add default register map for regmap cacheZidan Wang
FSL_SAI_TDR register is writable and not readable. According to regmap_volatile() function, if FSL_SAI_TDR want to be volatile, it should be readable. So we should remove FSL_SAI_TDR from volatile register list. If the flat cache don't have default register map, when do regcache_sync operation, the non volatile and writable registers will be synchronised to 0. FSL_SAI_TDR reigster will be written a 0 and cause channel swap. So add default register map for flat cache, and such register will not be written. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: fsl_esai: ETDR and TX0~5 registers are non volatileZidan Wang
ETDR and TX0~5 registers are writable and not readable. So they are non volatile. Remove them from volatile list, and add default register value for them. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 13:59:38 +0000