summaryrefslogtreecommitdiff
path: root/sound/soc/dwc
AgeCommit message (Collapse)Author
2020-03-27ASoC: dwc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87wo7bir8j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-18ASoC: dwc: dwc-i2s: use for_each_pcm_streams() macroKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87y2t1aa8t.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-18ASoC: soc-pcm: merge playback/cature_active into stream_activeKuninori Morimoto
DAI has playback_active and capture_active to care usage count. OTOH, we have SNDRV_PCM_STREAM_PLAYBACK/CAPTURE. But because of this kind of implementation mismatch, ALSA SoC has many verbose code. To solve this issue, this patch merge playback_active/capture_active into stream_active[2]; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/875zg5botu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-21ASoC: dwc: dwc-i2s: move .suspend/.resume to componentKuninori Morimoto
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y2u3x7iy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-11ASoC: dwc: Use managed buffer allocationTakashi Iwai
Clean up the drivers with the new managed buffer allocation API. The superfluous snd_pcm_lib_malloc_pages() and snd_pcm_lib_free_pages() calls are dropped, as well as the superfluous snd_pcm_lib_preallocate_free_for_all() call. As of the result, hw_free and pcm_destruct ops became empty and got removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191210142614.19405-4-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-11ASoC: dwc: Drop superfluous ioctl PCM opsTakashi Iwai
ASoC PCM core deals the empty ioctl field now as default. Let's kill the redundant lines. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191210145406.21419-6-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-09ASoC: Remove superfluous snd_dma_continuous_data()Takashi Iwai
The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-08ASoC: dwc: dwc-pcm: remove snd_pcm_opsKuninori Morimoto
snd_pcm_ops is no longer needed. Let's use component driver callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87h84r90dk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06ASoC: dwc: Drop superfluous PCM preallocation error checksTakashi Iwai
snd_pcm_lib_preallocate_pages() and co always succeed, so the error check is simply redundant. Drop it. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-28Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es7134', ↵Mark Brown
'asoc/topic/es8316', 'asoc/topic/es8328' and 'asoc/topic/fsl' into asoc-next
2018-02-16ASoC: dwc: Extends DW_I2S_QUIRK_COMP_PARAM1 to playbackAkshu Agrawal
When we have same register to tell capture and playback capability of a device and we want separate cpu dais for playback and capture. Then, DW_I2S_QUIRK_COMP_PARAM1 is used to enable one capability per dai. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: dwc-pcm: replace platform to componentKuninori Morimoto
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-09ASoC: dwc: fix typos in KconfigNik Nyby
This fixes a few typos in the snd_designware description. Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-14ASoC: dwc: Delete an error message for a failed memory allocation in ↵Markus Elfring
dw_i2s_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-17ASoC: dwc: constify snd_soc_dai_ops structureGustavo A. R. Silva
This structure is only stored in the ops field of a snd_soc_dai_driver structure. That field is declared const, so snd_soc_dai_ops structures that have this property can be declared as const also. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28ASoC: dwc: Added a quirk DW_I2S_QUIRK_16BIT_IDX_OVERRIDE to dwc driverVijendar Mukunda
Added quirk DW_I2S_QUIRK_16BIT_IDX_OVERRIDE to Designware driver. This quirk will set idx value to 1. By setting this quirk, it will override supported format as 16 bit resolution and bus width as 2 Bytes. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-30ASoC: dwc: Disallow building designware_pcm as a moduleJose Abreu
Designware PCM is an extension to Designware I2S and they are dependent on each other. For this reason, make Designware PCM a boolean which will compile with Desigwnare I2S module. The name of the module is not changed but the name of the files need to be changed. Also, without this commit we get errors when probbing designware_i2s module because of unspecified license: designware_pcm: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint designware_pcm: Unknown symbol __rcu_read_lock (err 0) designware_pcm: Unknown symbol devm_snd_soc_register_platform (err 0) designware_pcm: Unknown symbol synchronize_rcu (err 0) designware_pcm: Unknown symbol __rcu_read_unlock (err 0) designware_pcm: Unknown symbol snd_soc_set_runtime_hwparams (err 0) So, this is really needed as a fix. Fixes: 79361b2b98b7 ("ASoC: dwc: Add PIO PCM extension") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09ASoC: dwc: Enable 24 bit sample size in PIO modeJose Abreu
Sample size of 24 bits use in reality 32 bits for storage. We can safelly enable this sample size and treat the data as 32 bits. Tested in a x86_64 platform and in ARC AXS101 SDP platform. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09ASoC: dwc: Add record capability in PIO modeJose Abreu
Up until now PIO mode offered only playback support. With this patch we add support for record mode. The PCM was refactored so that we could reuse the existing infrastructure without many changes. We have support for 16 and 32 bits of sample size using only 2 channels. Tested in a x86_64 platform and in ARC AXS101 SDP platform. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-14ASoC: dwc: Fix PIO mode initializationJose Abreu
We can no longer rely on the return value of devm_snd_dmaengine_pcm_register(...) to check if the DMA handle is declared in the DT. Previously this check activated PIO mode but currently dma_request_chan returns either a valid channel or -EPROBE_DEFER. In order to activate PIO mode check instead if the interrupt line is declared. This reflects better what is documented in the DT bindings (see Documentation/devicetree/bindings/sound/ designware-i2s.txt). Also, initialize use_pio variable which was never being set causing PIO mode to never work. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: dwc: Drop DMA channel names assignmentSylwester Nawrocki
The dw_configure_dai_by_dt() function and further dev->{play,capture} _dma_data.dt data structures seem to be used in this driver only in case of a system using devicetree, thus chan_name assignments have no effect since they will be ignored in dmaengine_pcm_request_chan_of() call and will be substituted with values taken form dmaengine_pcm_dma_channel_names[] table ("tx", "rx"). Also there is no any "TX", "RX" dma-names entries in arch/arm/boot/dts, only lower case "tx", "rx" seem to be used. Lastly, this driver doesn't set SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME flag when registering a dmaengine PCM to indicate the chan_name should be used. My intention is to eventually remove the struct snd_dmaengine_dai_dma_data chan_name field as there is also a chan_names[] field in struct snd_dmaengine_pcm_config which can be used for same purpose. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-26SoC: dwc: trivial fix of spelling mistake "unsuppted" -> "unsupported"Colin Ian King
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21ASoC: dwc: make pcm support built-in when necessaryArnd Bergmann
The new PIO mode for the dwc audio driver causes a link failure when it is built as a loadable module but the audio driver is built-in: sound/built-in.o: In function `i2s_irq_handler': :(.text+0x58c64): undefined reference to `dw_pcm_push_tx' sound/built-in.o: In function `dw_i2s_probe': :(.text+0x593dc): undefined reference to `dw_pcm_register' We could link both into a single module, but apparently the author intended them to be separate, so this instead changes the Makefile to force the pcm module to be built-in if the base module is. This is a bit hacky but not as bad as trying to work around it in Kconfig language. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 79361b2b98b7 ("ASoC: dwc: Add PIO PCM extension") Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-13ASoC: dwc: Add PIO PCM extensionJose Abreu
A PCM extension was added to I2S driver so that audio samples are transferred using PIO mode. The PCM supports two channels @ 16 or 32 bits with rates 32k, 44.1k and 48k. Although the mainline I2S driver uses ALSA DMA engine the I2S controller can be built without DMA support, therefore this is the reason why this extension was added. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Rob Herring <robh@kernel.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30ASoC: dwc: Add helper functions to disable/enable irqsJose Abreu
Helper functions to disable and enable the I2S interrupts were added. Only the interrupts of the used channels are enabled. Also, there is no need to enable irqs at dw_i2s_config(), they are already enabled at startup. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Rob Herring <robh@kernel.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: alsa-devel@alsa-project.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-07ASoC: dwc: Use fifo depth to program FCRJose Abreu
This patch makes Designware I2S driver use the fifo depth value to program the fifo configuration register instead of using hardcoded values. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05ASoC: dwc: Unmask I2S interrupts only for enabled channelsJose Abreu
There is no need to unmask all interrupts at I2S start. This can cause performance issues in slower platforms. Unmask only the interrupts for the used channels. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-02ASoC: dwc: Ensure i2s_reg_comp{1,2} is always initialisedJon Medhurst (Tixy)
In the case that the driver is configured from device-tree i2s_reg_comp1 and i2s_reg_comp2 aren't initialised, breaking the driver. Fix this by unconditionally setting these values before checking for quirks. Fixes: a242cac1d3aa ("ASoC: dwc: add quirk to override COMP_PARAM_1 register") Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-10ASoC: dwc: add quirk to override COMP_PARAM_1 registerMaruthi Srinivas Bayyavarapu
DWC for capture in ACP 2.x IP reports playback and capture capabilities though it supports only capture. Added a quirk to override default value to represent capture capability only. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07ASoC: dwc: reconfigure dwc in 'resume' from 'suspend'Maruthi Srinivas Bayyavarapu
DWC IP can be powered off during system suspend in some platforms. After system is resumed, dwc needs to be programmed again to continue audio use case. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07ASoC: dwc: add quirk for different register offsetMaruthi Srinivas Bayyavarapu
DWC in ACP 2.x IP has different offsets for I2S_COMP_PARAM_* registers. Added a quirk to support the same. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07ASoC: dwc: add runtime suspend/resume functionalityMaruthi Srinivas Bayyavarapu
When DW controller is in master mode, it can disable/enable clock during the device runtime suspend/resume sequence. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es8328', ↵Mark Brown
'asoc/topic/fsl' and 'asoc/topic/fsl-card' into asoc-next
2015-10-24ASoC: dwc: add check for master/slave formatMaruthi Srinivas Bayyavarapu
DW i2s controller's master/slave config can be read from a read-only register. Machine driver can try to set a master/slave format on cpu-dai using 'set_fmt' of dai ops. A check is added to verify codec is master when dwc is slave and vice-versa. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-05ASoC: dwc: support dw i2s in slave modeMaruthi Srinivas Bayyavarapu
dw i2s controller can work in slave mode, codec being master. dw i2s is made to support master/slave operation, by reading dwc register. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02ASoC: dwc: fix dma stop transferring issueyitian
Designware I2S uses tx empty and rx available signals as the DMA handshaking signals. during music playing, if XRUN occurs, i2s_stop() function will be executed and both tx and rx irq are masked, when music continues to be played, i2s_start() is executed but both tx and rx irq are not unmasked which cause I2S stop sending DMA handshaking signal to DMA controller, and it finally causes music playing will be stopped once XRUN occurs for the first time. [On list discussion suggests this may be partly a race condition on slow systems -- broonie] Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02ASoC: dwc: correct irq clear methodYitian Bu
from Designware I2S datasheet, tx/rx XRUN irq is cleared by reading register TOR/ROR, rather than by writing into them. Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-02-04Merge remote-tracking branches 'asoc/topic/doc', 'asoc/topic/dwc', ↵Mark Brown
'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next
2015-01-28ASoC: dwc: Remove unnecessary conditional compilationAndrew Jackson
of_match_ptr is already conditionally compiled based on CONFIG_OF so further conditional compilation is not required. Remove conditional compilation surrounding of_match_ptr. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Add devicetree support for Designware I2SAndrew Jackson
Allow the driver to be configured through a device tree rather than platform data. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Register components with managed interfaceAndrew Jackson
Register SOC component using managed interface to simplify error handling and future introduction of device tree. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Prepare clock before useAndrew Jackson
Some I2S clocks may require some time to get the clock ready for operation and so need to be prepared before they are enabled. So, prepare the clock as well as enabling it, but combine the two through clk_prepare_enable. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Read I2S block configuration from registersAndrew Jackson
The I2S block provides component parameter registers which describe how the block is instantiated. Use these registers to extract the block's configuration rather than relying on platform data. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30ASoC: dwc: Switch to managed clock resourceAndrew Jackson
Simplify error handling during probe by using managed clock resources. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Iterate over all channelsAndrew Jackson
The Designware core can be configured with up to four stereo channels. Each stereo channel is individually configured so, when the driver's hw_params call is made, each requested stereo channel has to be programmed. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Ensure FIFOs are flushed to prevent channel swapAndrew Jackson
Flush the FIFOs when the stream is prepared for use. This avoids an inadvertent swapping of the left/right channels if the FIFOs are not empty at startup. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-22ASoC: dwc: Reorder code in preparation for DT supportAndrew Jackson
Move code that configures the DAI and DMA into a separate function. This reduces the size of the dw_i2s_probe function and will make it easier to add support for device tree to the driver. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22ASoC: dwc: Remove unnecessary debug messages and testsAndrew Jackson
The devm_XXX allocation functions print a message on failure, so additional messages are not required. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...