| Age | Commit message (Collapse) | Author |
|---|
|
Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".
On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)
BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config
overrides and the existing mic/mute LED setup. This patch implements
those in the fixup table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO
bit 0x04. However, unlike other devices, this amp seems to shut down
itself after the certain period, hence the OS needs to up/down the bit
dynamically only during the actual playback.
This patch adds the control of the GPIO bit via the existing pcm_hook
mechanism. Ideally it should be triggered at the actual stream start,
but we have only the state change at prepare/cleanup, so use those for
switching the GPIO bit on/off. This should be good enough for the
purpose, and was actually confirmed to work fine.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.
This patch provides a fixup for the fixed DAC/pin mapping for this
device.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In 9bbb94e57df1 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo
laptops") an existing Lenovo quirk was made more generic by removing a
0x12 pin requirement from the entry. This made the second chance table
Thinkpad jack entry unreachable as the pin configurations became
identical.
Revert the 0x12 pin requirement removal and move Thinkpad jack pin quirk
back to the primary pin table as they can co-exist when more specific
configurations come first.
Add a more targeted pin quirk for Lenovo devices that have 0x12 as
0x40000000.
Tested on Yoga 6 (AMD) laptop.
[ Corrected the commit ID -- tiwai ]
Fixes: 9bbb94e57df1 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YI0oefvTYn8URYDb@yoga
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the cx5066_fixups[] entries for HP devices for avoiding
the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all. That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.
Let's unify them with the single vendor-quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices
for avoiding the oversight of the duplicated or unapplied item in
future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung
and Lemote devices for avoiding the oversight of the duplicated or
unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for ASUS devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for Dell devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way. So now we simply keep
the PCI SSID order for the whole.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc882_fixup_tbl[] entries for Clevo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also, user lower hex letters in the entry.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This applies a SND_PCI_QUIRK(...) to the Clevo PCx0Dx barebones. This
fix enables audio output over the headset jack and ensures that a
microphone connected via the headset combo jack is correctly recognized
when pluged in.
[ Rearranged the list entries in a sorted order -- tiwai ]
Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210427153025.451118-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Cracking noises have been reported on the built-in speaker for certain
Bullseye platforms, when volume is > 80%.
This issue is caused by the specific combination of Codec and AMP in
this platform, and cannot be fixed by the AMP, so indead must be fixed
at codec level, by adding attenuation to the volume.
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1924997
Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After booting for first time on Bullseye, the DMIC is currently muted.
Instead, the DMIC volume should be set to a valid initial value.
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1923557
Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove a duplicate vendor+subvendor pin fixup entry as one is masking
the other and making it unreachable. Consider the more specific newcomer
as a second chance instead.
The generic entry is made less strict to also match for laptops with
slightly different 0x12 pin configuration. Tested on Lenovo Yoga 6 (AMD)
where 0x12 is 0x40000000.
Fixes: 607184cb1635 ("ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YIXS+GT/dGI/LtK6@yoga
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
845 G8
On HP EliteBook 845 G8, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.
In addition to that, the mic captures lots of noises, so also limits the
mic boost. The quality of capture audio becomes crystal clear after
limiting the mic boost.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210420115530.1349353-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Boot with plugged headset, the Headset Mic will be gone.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/207eecfc3189466a820720bc0c409ea9@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GA503 has almost exactly the same default setup as the GA401
model with the same issues. The GA401 quirks solve all the issues
so we will use the full quirk chain.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210419030411.28304-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp
used for ELD notifications), display connection change done during suspend,
can be lost due to following sequence of events:
1. system in S3 suspend
2. DP/HDMI receiver connected
3. system resumed
4. HDA controller resumed, but card->deferred_resume_work not complete
5. acomp eld_notify callback
6. eld_notify ignored as power state is not CTL_POWER_D0
7. HDA resume deferred work completed, power state set to CTL_POWER_D0
This results in losing the notification, and the jack state reported to
user-space is not correct.
The check on step 6 was added in commit 8ae743e82f0b ("ALSA: hda - Skip
ELD notification during system suspend"). It would seem with the deferred
resume logic in ASoC core, this check is not safe.
Fix the issue by modifying the check to use "dev.power.power_state.event"
instead of ALSA specific card power state variable.
BugLink: https://github.com/thesofproject/linux/issues/2825
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210416131157.1881366-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP ProBook 445 G7 (17T32ES) uses ALC236. Like ALC236_FIXUP_HP_GPIO_LED,
COEF index 0x34 bit 5 is used to control the playback mute LED, but the
microphone mute LED is controlled using pin VREF instead of a COEF index.
AlsaInfo: https://alsa-project.org/db/?f=0d3f4d1af39cc359f9fea9b550727ee87e5cf45a
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210416105852.52588-1-diabonas@archlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo Ideapad S740 requires quite a few COEF setups to make its
speakers working. The verb table was provided from Ryan Prescott as
the result of investigation via qemu:
https://github.com/ryanprescott/realtek-verb-tools/wiki/How-to-sniff-verbs-from-a-Windows-sound-driver
BugLink: https://github.com/thesofproject/linux/issues/2748
Tested-by: Ryan Prescott <ryan@cousinscomputers.net>
Link: https://lore.kernel.org/r/20210416081211.20059-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix two bugs with the Intel HDA Realtek ALC233 sound codec
present in Intel NUC NUC8i7BEH and probably a few other similar
NUC models.
These codecs advertise a 4-level microphone input boost amplifier on
pin 0x19, but the highest two boost settings do not work correctly,
and produce only low analog noise that does not seem to contain any
discernible signal. There is an existing fixup for this exact problem
but for a different PCI subsystem ID, so we re-use that logic.
Changing the boost level also triggers a DC spike in the input signal
that bleeds off over about a second and overwhelms any input during
that time. Thankfully, the existing fixup has the side effect of
making the boost control show up in userspace as a mute/unmute switch,
and this keeps (e.g.) PulseAudio from fiddling with it during normal
input volume adjustments.
Finally, the NUC hardware has built-in inverted stereo mics. This
patch also enables the usual fixup for this so the two channels cancel
noise instead of the actual signal.
[ Re-ordered the quirk entry point by tiwai ]
Signed-off-by: Phil Calvin <phil@philcalvin.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/80dc5663-7734-e7e5-25ef-15b5df24511a@philcalvin.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add description for access parameter in __snd_hda_add_vmaster()
to prevent the compilation warning:
warning: Function parameter or member 'access' not described in '__snd_hda_add_vmaster'
Fixes: e65bf99718b5 ("ALSA: HDA - remove the custom implementation for the audio LED trigger")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210409214616.1539685-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that
loses the speaker output after resume. With the comparison of COEF
dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to
the speaker amp.
This patch adds the specific quirk for the device to restore the COEF
bits at the codec (re-)initialization.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is another HP ZBook G5 model with the PCI SSID 103c:844f that
requires the same quirk for controlling the mute LED. Add the
corresponding entry to the quirk table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171314.667-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With the new snd-ctl-led module, we have a generic way
to trigger audio LEDs based on the sound control changes.
Remove the custom implementation from the HDA driver.
Move the LED initialization before snd_hda_gen_parse_auto_config()
call in all drivers to create marked controls there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-5-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210330114428.40490-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recently added PM prepare and complete callbacks don't have the
sanity check whether the card instance has been properly initialized,
which may potentially lead to Oops.
This patch adds the azx_is_pm_ready() call in each place
appropriately like other PM callbacks.
Fixes: f5dac54d9d93 ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The card power state change via snd_power_change_state() at the system
suspend/resume seems dropped mistakenly during the PM code rewrite.
The card power state doesn't play much role nowadays but it's still
referred in a few places such as the HDMI codec driver.
This patch restores them, but in a more appropriate place now in the
prepare and complete callbacks.
Fixes: f5dac54d9d93 ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Increase the device select range to 4 on platforms supporting
4 concurrent displays.
This fixes a problem in scenario where total of 4 displays are active,
and 3 of these are audio capable DP receivers and connected to a DP-MST
hub. Due to incorrect range for device select, audio could not be played
to the 3rd monitor in DP-MST hub.
BugLink: https://github.com/thesofproject/linux/issues/2798
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210324172337.51730-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
rme9652 wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device
[ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.759968] Call Trace:
[ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652]
[ 1.760434] release_card_device+0x4b/0x80 [snd]
[ 1.760679] device_release+0x3b/0xa0
[ 1.760874] kobject_put+0x94/0x1b0
[ 1.761059] put_device+0x13/0x20
[ 1.761235] snd_card_free+0x61/0x90 [snd]
[ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652]
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210321153840.378226-4-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
hdspm wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device
[ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.795181] Call Trace:
[ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm]
[ 1.795595] release_card_device+0x4b/0x80 [snd]
[ 1.795860] device_release+0x3b/0xa0
[ 1.796072] kobject_put+0x94/0x1b0
[ 1.796260] put_device+0x13/0x20
[ 1.796438] snd_card_free+0x61/0x90 [snd]
[ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm]
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210321153840.378226-3-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
hdsp wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device
[ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.766985] Call Trace:
[ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp]
[ 1.767388] release_card_device+0x4b/0x80 [snd]
[ 1.767639] device_release+0x3b/0xa0
[ 1.767838] kobject_put+0x94/0x1b0
[ 1.768027] put_device+0x13/0x20
[ 1.768207] snd_card_free+0x61/0x90 [snd]
[ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp]
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210321153840.378226-2-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We found the alc_update_headset_mode() is not called on some machines
when unplugging the headset, as a result, the mode of the
ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type
is not cleared, if users plug a differnt type of headset next time,
the determine_headset_type() will not be called and the audio jack is
set to the headset type of previous time.
On the Dell machines which connect the dmic to the PCH, if we open
the gnome-sound-setting and unplug the headset, this issue will
happen. Those machines disable the auto-mute by ucm and has no
internal mic in the input source, so the update_headset_mode() will
not be called by cap_sync_hook or automute_hook when unplugging, and
because the gnome-sound-setting is opened, the codec will not enter
the runtime_suspend state, so the update_headset_mode() will not be
called by alc_resume when unplugging. In this case the
hp_automute_hook is called when unplugging, so add
update_headset_mode() calling to this function.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We found a recording issue on a Dell AIO, users plug a headset-mic and
select headset-mic from UI, but can't record any sound from
headset-mic. The root cause is the determine_headset_type() returns a
wrong type, e.g. users plug a ctia type headset, but that function
returns omtp type.
On this machine, the internal mic is not connected to the codec, the
"Input Source" is headset mic by default. And when users plug a
headset, the determine_headset_type() will be called immediately, the
codec on this AIO is alc274, the delay time for this codec in the
determine_headset_type() is only 80ms, the delay is too short to
correctly determine the headset type, the fail rate is nearly 99% when
users plug the headset with the normal speed.
Other codecs set several hundred ms delay time, so here I change the
delay time to 850ms for alc2x4 series, after this change, the fail
rate is zero unless users plug the headset slowly on purpose.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
small fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are the usual HD-audio quirks"
* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
ALSA: usb-audio: Fix unintentional sign extension issue
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
ASoC: rt711: add snd_soc_component remove callback
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: simple-card-utils: Do not handle device clock
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda: generic: Fix the micmute led init state
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
spi: cadence: set cqspi to the driver_data field of struct device
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: remove remnants of sirf prima/atlas audio codec
...
|
|
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are files in sound/pci/ctxfi which follow this syntax in their file
headers, i.e. start with '/**' like comments, which causes unexpected
warnings from kernel-doc.
E.g., running scripts/kernel-doc -none on sound/pci/ctxfi/ctresource.c
causes this warning:
"warning: wrong kernel-doc identifier on line:
* Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved."
Similarly for other files too.
Provide a simple fix by replacing the kernel-doc like comment syntax with
general format, i.e. "/*", to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210317203932.23993-1-yashsri421@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are files in sound/pci/asihpi which follow this syntax in their file
headers, i.e. start with '/**' like comments, which causes unexpected
warnings from kernel-doc.
E.g., running scripts/kernel-doc -none on sound/pci/asihpi/hpidspcd.h
causes this warning:
"warning: Cannot understand
on line 4 - I thought it was a doc line"
Provide a simple fix by replacing the kernel-doc like comment syntax with
general format, i.e. "/*", to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210317202144.20290-1-yashsri421@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The HP EliteBook 850 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316094236.89028-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP EliteBook 840 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316074626.79895-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
