| Age | Commit message (Collapse) | Author |
|---|
|
Add missing __devinit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
sound/pci/lola/Makefile was trying to build lola modules even
when PCI and SND_LOLA were not enabled, causing build errors:
ERROR: "snd_pcm_hw_constraint_step" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_period_elapsed" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_dma_alloc_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_hw_constraint_integer" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_sgbuf_ops_page" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_set_ops" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_free_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_malloc_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_sgbuf_get_chunk_size" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_dma_free_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_preallocate_pages_for_all" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_new" [sound/pci/lola/snd-lola.ko] undefined!
Fix the Makefile to build only when CONFIG_SND_LOLA is enabled.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Also protect the call of lola_update_rirb() with spinlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Renamed to Digial SRC Capture Switch for more correct representation.
Also fixed analog volume control on Lola161611 and lola881.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For assuring the synchronized state with the pause operation,
loop over the all linked streams and waits until all get ready
in a loop.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added the refcounting for the exclusive SRC control.
Also, fixed the possible stall after PCM pause operations.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add some sanity checks.
Change PCM parameters appropriately per granularity.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Completely switch to SG-buffer now, as it's working stably.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added granularity and sample_rate_min module options.
The former controls the h/w access granularity. As default, it's set
to the max value 32.
The latter controls the minimum sample rate in Hz, as default 16000.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use a single BDL for both buffers instead of allocating for each.
Also a few tune-up to avoid the stream stalls in the PCM code and
the prelimianry work for SG-buffer support are added, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use snd_printdd() for less important debug messages.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The codec proc file becomes a read only that shows the codec widgets
in a text form. A new proc file, codec_rw, is introduced instead for
accessing the Lola verb directly by reading and writing to it.
Also, regs proc file shows the contents of DSD, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make lola_sample_rate_convert() global so that it can be accessed from
other files.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added a new driver for supporting Digigram Lola PCI-e boards.
Lola has a similar h/w design like HD-audio but with extended verbs.
Thus the driver is written similarly like HD-audio driver in the bus
part. The codec part is rather written in a fixed way specific to the
Lola board because of the verb incompatibility.
The driver provides basic PCM, supporting multi-streams and mixing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
