summaryrefslogtreecommitdiff
path: root/sound/pci/hda
AgeCommit message (Collapse)Author
2008-08-17ALSA: hda - Fix capture source widgets on ALC codecsTakashi Iwai
On some Realtek codecs like ALC882 or ALC883, the capture source is no mux but sum widget. We have to initialize all channels properly for this type, otherwise noises may come in from the unused route. The patch assures to mute unused routes, and unmute the currently selected route. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
2008-08-12ALSA: hda - support new AMD HDMI Audio (1002:970f)Libin Yang
Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-12ALSA: hda_intel: ALSA HD Audio patch for Intel Ibex Peak DeviceIDsSeth Heasley
This patch adds the Intel Ibex Peak (PCH) HD Audio Controller DeviceIDs. Signed-off by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).Nicolas Boichat
Currently, even if you pass model=intel-mac-v3 as a module parameter to snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still try to auto-detect the model type. This is a problem on my MacBook Pro 1st generation, which needs intel-mac-v3, but sometimes incorrectly reports 0x00000100 as subsystem id, which causes the switch in patch_stac922x to select intel-mac-v4. To fix this, I added a new model called intel-mac-auto, so in case no module parameter is passed, and an Intel Mac board is detected, the model will be automatically detected, while no detection will be done if the model is forced to intel-mac-v3. This problem has been around for quite a while, and I used to fix it by moving the case statement for 0x00000100 in patch_stac922x so that intel-mac-v3 is chosen. Another way to fix the problem would be to check if a module parameter was set directly in patch_stac922x, using something like this: if (spec->board_config == STAC_INTEL_MAC_V3 && !codec->bus->modelname) { But I think it is less elegant (if you prefer that way, I can prepare a patch). Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27ALSA: hda - Add automatic model setting for the Acer Aspire 5920G laptopTravis Place
Make the Acer Aspire 5920G (1025:0121) select ALC883_ACER_ASPIRE by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18ALSA: hda - Add support of ASUS Eeepc P90*Kailang Yang
- Support ASUS_P900A = P703 - Support ASUS_P901 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17ALSA: hda - Added support for Asus V1SnAlexander Holler
Added the necessary ID for Asus V1Sn to patch_realtek.c to use ALC861VD_LENOVO on these laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-16ALSA: hda - Align BDL position adjustment parameterTakashi Iwai
It seems NVidia and other hardwares require the alignment for period update timing. For satisfying this condition, align the position adjustment for delayed wake-up to the initial bdl_pos_adj value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-14ALSA: hda - Fix FSC V5505 modelTakashi Iwai
model=laptop-hpmicsense matches better to FSC V5505 laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda - Fix missing init for unsol events on micsense modelTakashi Iwai
Fixed the missing initialization for unsolicited events on Cx5045 micsense model. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda - Fix internal mic vref pin setupTakashi Iwai
Set the vref80 to the internal mic pin 0x12 for Cx5045. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: hda: 92hd71bxx PC BeepMatthew Ranostay
Added volume controls for the analog PC Beep on 92hd71bxx codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: HDA - HP dc7600 with pci sub IDs 0x103c/0x3011 belongs to hp-3013 modelJaroslav Kysela
As reported and tested by an RedHat customer, HP dc7600 with pci sub IDs 0x103c/0x3011 works with the hp-3013 model and not with the hp only model. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: hda - removed redundant gpio_maskMatthew Ranostay
An gpio_mask value was defined twice needlessly. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: hda - Add support for Lenovo 3000 N200Takashi Iwai
Added the model entry (model=lenovo) for Lenovo N3000 N200 laptop with ALC861-VD. Reference below: https://bugzilla.novell.com/show_bug.cgi?id=406425 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ALSA: hda - Fix speaker output on Toshiba P105Takashi Iwai
Toshiba Satellite P105 with cx5045 has no HP pin but only a speaker pin and does the speaker-muting on hardware. Thus the matching model is laptop-micsense. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: hda - Add missing Thinkpad Z60m supportTakashi Iwai
Added the missing SSID of Thinkpad Z60m for model=thinkpad with AD1981HD. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ALSA: hda - Fix ALC883 medion modelTakashi Iwai
ALC883 medion model doesn't unmute the proper amps so no output can be heard. Replaced the mute switches to behave just like other models. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27ALSA: hda - disable amp override on non-HP machinesTakashi Iwai
Some machines with Cx5045 seem to have no problem with the volume over 0dB on NID 0x17. Disable amp overrides for other devices but HP. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27ALSA: hda - Add MacBook 3.1 supportTakashi Iwai
MacBook 3.1 is compatible with model=mbp3. Added the codec SSID 10b6:3600. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: hda - Added SSID for 'Fujitsu Siemens Amilo M1451G' laptopTravis Place
Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to patch_realtek.c , so that it uses ALC880_FUJITSU by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: hda - Added model selection for iMac 24"Travis Place
Added the SSID of a known iMac 24" to automatically use ALC885_IMAC24 quirk. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-20ALSA: hda - Fix digital converter proc outputTakashi Iwai
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved. The whole SIC bits are returned from DIGI_CONVERT_1. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18ALSA: hda - Fix wrong volumes in AD1988 auto-probe modeTakashi Iwai
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16ALSA: hda - use upper_32_bits()Takashi Iwai
Use the standard upper_32_bits() instead of own macro. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16ALSA: hda - bdl_pos_adj=32 as defaultTakashi Iwai
Use bdl_pos_adj=32 as default except for Intel hardwares confirmed to work with bdl_pos_adj=1. Looks like ATI and NVidia require this higher value. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16ALSA: hda: Add support for 92HD73xxx codecsMatthew Ranostay
Added support for new family of IDT codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Remove unused mutexTakashi Iwai
Removed unused mutex from patch_*.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Fix stac9205_cfg_tblTakashi Iwai
Sort stac9205_cfg_table in the order of id numbers, and removed the duplicated (obsoleted) entries for 0x01fc and 0x01fd. This doesn't change the driver behavior since the old entries are all secondary. The duplication occured due to commit dfe495d0, and the old entries were introduced by commit ae0a8ed8. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Add a warning if pending IRQ is foundTakashi Iwai
The pending IRQ handling is a very hackish workaround and should be avoided as much as possible via a larger bdl_pos_adj option value. Put a warning message if this situation occurs so that the user may have a chance to notice that something is wrong. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Fix bdl_pos_adj value for ATI SB chipsetsTakashi Iwai
ATI SB controllers seem to report the DMA ahead in the amount of FIFO. Thus bdl_pos_adj should be 32 for them as default. Also, the default value is set to -1, which means to make the driver to choose the appropriate value. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - bdl_pos_adj option to each instanceTakashi Iwai
The option bdl_pos_adj should be provided for each card instance instead of a global one because the value depends rather on each controller-chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - remove position_fix=3Takashi Iwai
position_fix=3 is the option to correct the DMA position with the FIFO size. But, it never worked correctly, and we have now more other workarounds for the DMA position fixes. Thus better to remove it. Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role better. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Add bdl_pos_adj optionTakashi Iwai
Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup timing. Most HD-audio hardwares have a problem that a BDL IRQ is issued before actually the data and the DMA pointer are updated. We have already a mechanism to force to delay snd_pcm_period_elapsed() calls via workq, but this costs much CPU, and typically the delay is within one sample. Thus, it's more clever to adjust the BDL entries instead. The new option adds the size of the delay in frames. As default, it's set to 1 -- that is, one sample delay. Even the hardware is really correct, one sample delay is relatively harmless in comparison with reporting wrong positions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13[ALSA] hda - Add Toshiba dynabook SS RX1 supportAkio Idehara
I have Toshiba dynabook SS RX1 and this patch adds that support. Signed-off-by: Akio Idehara <zbe64533@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-06[ALSA] hda - increase max_codecs of ICH to 4Takashi Iwai
It turned out that some ICH9-based boards use SD3 for the audio codec where the current driver code doesn't probe. Since we have a better codec slot check now, it must be safe to increase this to 4. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06[ALSA] hda - Fix PLL gating control on Realtek codecsTakashi Iwai
On some Realtek codecs, the analog PLL gating control bit must be set off while the default value is 1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06[ALSA] hda - support intel DG33 motherboardsJiang zhe
These two motherboards's pin configuration are not covered by driver. I wrote a new model to support them. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Fix EAPD and COEF setups for realtek codecsKailang Yang
Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - show correct codec chip in PCM stream namesKailang Yang
Show more exact codec chip name in the PCM stream name strings. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Fix vref pincap check in alc882 auto-detectionKailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add ALC663 supportKailang Yang
Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add ICH9 controller support (8086:2911)Kailang Yang
Added the missing PCI ID for ICH9 controller (8086:2911) Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add support of Teradici controllerKailang Yang
Add the new PCI ID 0x6549 0x1200 Teradici controller. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSETakashi Iwai
Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to represent its meaning more better. This config isn't provided only for the detection but for more verbose debug prints in general. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-19[ALSA] hda - Fix DMA position inaccuracyTakashi Iwai
Many HD-audio controllers seem inaccurate about the IRQ timing of PCM period updates. This has caused problems on audio quality; e.g. JACK doesn't work with two periods. This patch fixes the problem by checking the current DMA position at IRQ handler and delays the period-update via a workq if it's inaccurate. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-09[ALSA] hda - Fix "alc262_sony_unsol[]" hda_verb arrayAkio Idehara
I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: Akio Idehara <zbe64533@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-04[ALSA] hda - COMPAL IFL90/JFL-92 laptop quirkTony Vroon
Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Guri <gurashka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-03[ALSA] hda - Fix resume of auto-config mode with Realtek codecsTakashi Iwai
The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] hda - Fix model for LG LS75 laptopTakashi Iwai
Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 00:33:52 +0000