| Age | Commit message (Collapse) | Author |
|---|
|
As a preparatory patch for the upcoming -Wimplicit-fallthrough
compiler checks, replace with the standard "fall through" annotation
at the right places. They have to be put right before the next
labels.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Trivial spelling mistake fix in debug message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 115075 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 402016 ("Missing break in switch")
Addresses-Coverity-ID: 1056542 ("Missing break in switch")
Addresses-Coverity-ID: 1339579 ("Missing break in switch")
Addresses-Coverity-ID: 1369526 ("Missing break in switch")
Addresses-Coverity-ID: 1369529 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1165394 ("Missing break in switch")
Addresses-Coverity-ID: 1167851 ("Missing break in switch")
Addresses-Coverity-ID: 402015 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1468367 ("Missing break in switch")
Addresses-Coverity-ID: 115037 ("Missing break in switch")
Addresses-Coverity-ID: 115038 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There was a typo of COPY_USER in the dead code (that is disabled
as default).
Fixes: 4b83eff81c81 ("ALSA: sb: Convert to the new PCM ops")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The data types defined in SB CSP driver code are all in little-endian,
hence the proper type like __le32 should be used.
Spotted by sparse, a warning like:
sound/isa/sb/sb16_csp.c:330:14: warning: cast to restricted __le32
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The PCM format type is with __bitwise, and it can't be converted from
integer implicitly. Instead of an ugly cast, declare the function
argument of snd_sb_csp_autoload() with the proper snd_pcm_format_t
type.
This fixes the sparse warnings like:
sound/isa/sb/sb16_csp.c:743:22: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The PCM format type in snd_pcm_format_t can't be treated as integer
implicitly since it's with __bitwise. We have already a helper
function to get the bit index of the given type, and use it in each
place instead.
This fixes sparse warnings like:
sound/isa/sb/sb16_main.c:61:44: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The PCM format type is with __bitwise, and it can't be converted from
integer implicitly. Instead of an ugly cast, declare the function
argument of snd_wss_get_format() with the proper snd_pcm_format_t
type.
This fixes the sparse warnings like:
sound/isa/wss/wss_lib.c:551:14: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The PCM format type is with __bitwise, and it can't be converted from
integer implicitly. Instead of an ugly cast, declare the function
argument of snd_ad1816a_get_format() with the proper snd_pcm_format_t
type.
This fixes the sparse warning like:
sound/isa/ad1816a/ad1816a_lib.c:93:14: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix a sparse warning:
sound/isa/msnd/msnd_pinnacle.c:813:1: warning: Using plain integer as NULL pointer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The default sample sizes set by msnd driver are bogus; it sets ALSA
PCM format, not the actual bit width.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The io-mapped buffers used in msnd drivers need __iomem annotations.
This fixes sparse warnings like:
sound/isa/msnd/msnd_pinnacle.c:172:45: warning: incorrect type in initializer (different address spaces)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make use of the swap macro and remove unnecessary variable *tmp*. This
makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pointer runtime is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'runtime' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pointer private_data is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'private_data' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pointer chip is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'chip' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that the documentation/script file got restored, fix the
references within the Kernel tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove of atomisp driver from staging, as nobody would have time to
dedicate huge efforts to fix all the problems there. Also, we have a
feeling that the driver may not even run the way it is.
- move Zoran driver to staging, in order to be either fixed to use VB2
and the proper media kAPIs or to be removed
- remove videobuf-dvb driver, with is unused for a while
- some V4L2 documentation fixes/improvements
- new sensor drivers: imx258 and ov7251
- a new driver was added to allow using I2C transparent drivers
- several improvements at the ddbridge driver
- several improvements at the ISDB pt1 driver, making it more coherent
with the DVB framework
- added a new platform driver for MIPI CSI-2 RX: cadence
- now, all media drivers can be compiled on x86 with COMPILE_TEST
- almost all media drivers now build on non-x86 architectures with
COMPILE_TEST
- lots of other random stuff: cleanups, support for new board models,
bug fixes, etc
* tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
media: omap2: fix compile-testing with FB_OMAP2=m
media: media/radio/Kconfig: add back RADIO_ISA
media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl()
media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
media: arch: sh: migor: Fix TW9910 PDN gpio
media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure
media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG
media: marvel-ccic: allow ccic and mmp drivers to coexist
media: uvcvideo: Prevent setting unavailable flags
media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges
media: dvb-frontends/stv0910: make TS speed configurable
media: ddbridge/mci: add identifiers to function definition arguments
media: ddbridge/mci: protect against out-of-bounds array access in stop()
media: rc: ensure input/lirc device can be opened after register
media: rc: nuvoton: Keep device enabled during reg init
media: rc: nuvoton: Keep track of users on CIR enable/disable
media: rc: nuvoton: Tweak the interrupt enabling dance
media: uvcvideo: Support realtek's UVC 1.5 device
media: uvcvideo: Fix driver reference counting
media: gspca_zc3xx: Enable short exposure times for OV7648
...
|
|
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped one multi-line call to a single line
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Trivial fix to spelling mistake in KERN_ERR error messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drivers that depend on ISAPNP currently can't be built with
COMPILE_TEST. However, looking at isapnp.h, there are already
stubs there to allow drivers to include it even when isa
PNP is not supported.
So, remove such dependencies when COMPILE_TEST.
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
All sound drivers that don't depend on PNP can be safelly
build with COMPILE_TEST, as ISA provides function stubs to
be used for such purposes.
As a side effect, with this change, the radio-miropcm20
can now be built outside i386 with COMPILE_TEST.
It should be noticed that ISAPNP currently depends on ISA.
So, on drivers that depend on it, we need to add an
explicit dependency on ISA, at least until another patch
removes it.
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
snd_gf1_dma_transfer_block()
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the SB8 MIDI code sets up the timer object at each time
before scheduling it at trigger callback, but basically this is
superfluous once after set up. Also, the code misses the
del_timer_sync() call that may leave a race condition for
use-after-free.
This patch addresses these issues, moving timer_setup() to
snd_sb8dsp_midi(), and adding the del_timer_sync() call at
snd_sb8dsp_midi_output_trigger() to make sure.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
[Re-use the existing chip->midi_substream_output instead of assigning
a new field to struct snd_sb -- tiwai]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make these const as they are only used in a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
*_device_id are not supposed to change at runtime. All functions
working with *_device_id provided by <linux/pnp.h> work with
const *_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
*_device_id are not supposed to change at runtime. All functions
working with *_device_id provided by <linux/pnp.h> work with
const *_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The structure emu8000_ops is only copied into another structure, so
it can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
