summaryrefslogtreecommitdiff
path: root/sound/hda
AgeCommit message (Collapse)Author
2017-05-10ALSA: hda: Fix cpu lockup when stopping the cmd dmasJeeja KP
Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq()) causes hard lockup so unlock while waiting using jiffies. ---<-snip->--- <0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 <4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem <4>[ 1211.603053] irq event stamp: 13366 <4>[ 1211.603053] hardirqs last enabled at (13365): ... <4>[ 1211.603059] Call Trace: <4>[ 1211.603059] ? delay_tsc+0x3d/0xc0 <4>[ 1211.603059] __delay+0xa/0x10 <4>[ 1211.603060] __const_udelay+0x31/0x40 <4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core] <4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel] <4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core] <4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec] <4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel] <4>[ 1211.603061] pci_pm_suspend+0x71/0x140 <4>[ 1211.603062] dpm_run_callback+0x6f/0x330 <4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0 <4>[ 1211.603062] __device_suspend+0xf9/0x370 <4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60 <4>[ 1211.603063] async_suspend+0x1a/0x90 <4>[ 1211.603063] async_run_entry_fn+0x34/0x160 <4>[ 1211.603063] process_one_work+0x1f4/0x6d0 <4>[ 1211.603063] ? process_one_work+0x16e/0x6d0 <4>[ 1211.603064] worker_thread+0x49/0x4a0 <4>[ 1211.603064] kthread+0x107/0x140 <4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0 <4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40 <4>[ 1211.603065] ret_from_fork+0x2e/0x40 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419 Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set") Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> CC: stable <stable@vger.kernel.org> # 4.7 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-02Merge tag 'asoc-v4.12' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.12 A quiet release for the core, but lots of new drivers this time around: - A new, generalized, API for hooking up jacks which makes it easier to write generic machine drivers for simple cases. - Continuing fixes for issues with the x86 CPU drivers. - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213
2017-04-07ALSA: hda - add more ML register definitionsLibin Yang
This patch refines the definition of AZX_MLCTL_SPA and AZX_MLCTL_CPA and add more definitions of ML registers Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03ALSA: hda - Avoid tricky macrosTakashi Iwai
The macros _snd_hdac_chip_read() and *_write() expand to different types (b,w,l) per their argument. They were thought to be used only internally for other snd_hdac_chip_*() macros, but in some situations we need to call these directly, and they are way too ugly. Instead of saving a few lines, we just write these macros explicitly with the types, so that they can be used in a saner way. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-29Merge branch 'topic/hda' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2017-03-29ALSA: hda: Fix LLCH register readB, Jayachandran
LLCH is a 16 bit register. Use readw instead of readl API. Signed-off-by: B, Jayachandran <jayachandran.b@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-24Merge tag 'v4.10-rc1' into asoc-intelMark Brown
Linux 4.10-rc1
2017-01-06ALSA: hda: check stream decoupled register stateJeeja KP
Check stream decoupled register value with requested value before decoupling/coupling the stream. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-10-25Merge tag 'drm-intel-next-2016-10-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next - first slice of the gvt device model (Zhenyu et al) - compression support for gpu error states (Chris) - sunset clause on gpu errors resulting in dmesg noise telling users how to report them - .rodata diet from Tvrtko - switch over lots of macros to only take dev_priv (Tvrtko) - underrun suppression for dp link training (Ville) - lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish from Jani - gen9 wm fixes from Paulo&Lyude - updated ddi programming for kbl (Rodrigo) - respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville) * tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits) drm/i915: Update DRIVER_DATE to 20161024 drm/i915: Stop setting SNB min-freq-table 0 on powersave setup drm/i915/dp: add lane_count check in intel_dp_check_link_status drm/i915: Fix whitespace issues drm/i915: Clean up DDI DDC/AUX CH sanitation drm/i915: Respect alternate_ddc_pin for all DDI ports drm/i915: Respect alternate_aux_channel for all DDI ports drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7 drm/i915: KBL - Recommended buffer translation programming for DisplayPort drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup drm/i915: Add a sunset clause to GPU hang logging drm/i915: Stop reporting error details in dmesg as well as the error-state drm/i915/gvt: do not ignore return value of create_scratch_page drm/i915/gvt: fix spare warnings on odd constant _Bool cast drm/i915/gvt: mark symbols static where possible drm/i915/gvt: fix sparse warnings on different address spaces drm/i915/gvt: properly access enabled intel_engine_cs drm/i915/gvt: Remove defunct vmap_batch() drm/i915/gvt: Use common mapping routines for shadow_bb object drm/i915/gvt: Use common mapping routines for indirect_ctx object ...
2016-09-22drm/i915/dp: DP audio API changes for MSTPandiyan, Dhinakaran
DP MST provides the capability to send multiple video and audio streams through a single port. This requires the API's between i915 and audio drivers to distinguish between multiple audio capable displays that can be connected to a port. Currently only the port identity is shared in the APIs. This patch adds support for MST with an additional parameter 'int pipe'. The existing parameter 'port' does not change it's meaning. pipe = MST : display pipe that the stream originates from Non-MST : -1 Affected APIs: struct i915_audio_component_ops - int (*sync_audio_rate)(struct device *, int port, int rate); + int (*sync_audio_rate)(struct device *, int port, int pipe, + int rate); - int (*get_eld)(struct device *, int port, bool *enabled, - unsigned char *buf, int max_bytes); + int (*get_eld)(struct device *, int port, int pipe, + bool *enabled, unsigned char *buf, int max_bytes); struct i915_audio_component_audio_ops - void (*pin_eld_notify)(void *audio_ptr, int port); + void (*pin_eld_notify)(void *audio_ptr, int port, int pipe); This patch makes dummy changes in the audio drivers (thanks Libin) for build to succeed. The audio side drivers will send the right 'pipe' values for MST in patches that will follow. v2: Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville) Included Asoc driver API compatibility changes from Jeeja. Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi) Added comment for av_enc_map[] definition. (Takashi) v3: Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville) Renamed get_saved_encoder() to get_saved_enc() to reduce line length v4: Rebased. Parameter check for pipe < -1 values in get_saved_enc() (Ville) Switched to for_each_pipe() in get_saved_enc() (Ville) Renamed 'pipe' to 'dev_id' in audio side code (Takashi) v5: Included a comment for the dev_id arg. (Libin) Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
2016-09-16ALSA: hdac: add missing \n to end of dev_err messagesColin Ian King
Trival fix, some dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA - Ext hda: remove bus_parse_capabilitiesVinod Koul
Remove the unused one as we have moved it up to hdac core. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: convert users to core bus_parse_capabilitiesVinod Koul
Now that we have the bus parse capabilities moved to core, we need to convert users. The SKL driver and HDA extended lib needs to converted in single patch, otherwise we regress on the functionality. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: hda - move bus_parse_capabilities to coreVinod Koul
HDA capability introduced recently are move to hdac core so that it can be used by legacy driver as well. Also move the capability pointers up to hdac_bus object. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-03ALSA: hda: Fix krealloc() with __GFP_ZERO usageTakashi Iwai
krealloc() doesn't work always properly with __GFP_ZERO flag as expected. For clearing the reallocated area, we need to clear explicitly instead. Reported-by: Joe Perches <joe@perches.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-25Merge branch 'for-next' into for-linusTakashi Iwai
Merged 4.8 changes.
2016-06-17ALSA: hdac_regmap - fix the register access for runtime PMJaroslav Kysela
Call path: 1) snd_hdac_power_up_pm() 2) snd_hdac_power_up() 3) pm_runtime_get_sync() 4) __pm_runtime_resume() 5) rpm_resume() The rpm_resume() returns 1 when the device is already active. Because the return value is unmodified, the hdac regmap read/write functions should allow this value for the retry I/O operation, too. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-16ALSA: hda: fix some klockwork scan warningsLibin Yang
This patch fixes some warnings from klockwork. These warnings are not the real issues. The patch adds the sanity check. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-16Merge tag 'asoc-v4.7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.7 The updates this time around are almost all driver code: - Further slow progress on the topology code. - Substantial updates and improvements for the da7219, es8328, fsl-ssi Intel and rcar drivers.
2016-05-13Merge remote-tracking branch 'asoc/topic/hdmi' into asoc-nextMark Brown
2016-05-13Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2016-05-13ALSA: hdac: add link pm and ref countingVinod Koul
The HDA links can be switched off when not is use, similarly command DMA can be stopped as well. This calls for a reference counting mechanism on the link by it's users to manage the link power. The DMA can be turned off when all links are off For this we add two APIs snd_hdac_ext_bus_link_get snd_hdac_ext_bus_link_put They help users to turn up/down link and manage the DMA as well Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-10Merge branch 'for-linus' into for-nextTakashi Iwai
2016-05-08ALSA: hda: fix to wait for RIRB & CORB DMA to setJeeja KP
If the DMAs are not being quiesced properly, it may lead to stability issues, so the recommendation is to wait till DMAs are stopped. After setting the stop bit of RIRB/CORB DMA, we should wait for stop bit to be set. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-08ALSA: hda: fix the missing ptr initializationVinod Koul
ebus is a member of extended device and was never initialized, so do this at device creation. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-28ALSA: hda - add helper to get channels from cap bitsSubhransu S. Prusty
This helper is copied from legacy hda driver. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-27Merge tag 'asoc-fix-v4.6-rc5' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.6 This is a fairly large collection of fixes but almost all driver specific ones, especially to the new Intel drivers which have had a lot of recent development. The one core fix is a change to the debugfs code to avoid crashes in some relatively unusual configurations.
2016-04-26Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2016-04-26Merge branch 'for-linus' into for-nextTakashi Iwai
For taking back the recent change of HDA HDMI fixes for i915 HSW/BDW. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-26ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDWTakashi Iwai
The recent bug report suggests that BCLK setup for i915 HSW/BDW needs to be updated at each HDMI hotplug, not only at initialization and resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at ELD notification, too. Otherwise the HDMI audio may be out of sync and played in a wrong pitch. However, the HDA codec driver has no access to the controller registers, and currently the code managing these registers is in hda_intel.c, i.e. local to the controller driver. For allowing the explicit BCLK update from the codec driver, as in this patch, the former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA controller driver and intel_pin_eld_notify() in HDMI codec driver. Along with this change, snd_hdac_get_display_clk() gets dropped as it's no longer used. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410 Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-21ALSA: hda - Fix possible race on regmap bypass flipTakashi Iwai
HD-audio driver uses regmap cache bypass feature for reading a raw value without the cache. But this is racy since both the cached and the uncached reads may occur concurrently. The former is done via the normal control API access while the latter comes from the proc file read. Even though the regmap itself has the protection against the concurrent accesses, the flag set/reset is done without the protection, so it may lead to inconsistent state of bypass flag that doesn't match with the current read and occasionally result in a kernel WARNING like: WARNING: CPU: 3 PID: 2731 at drivers/base/regmap/regcache.c:499 regcache_cache_only+0x78/0x93 One way to work around such a problem is to wrap with a mutex. But in this case, the solution is simpler: for the uncached read, we just skip the regmap and directly calls its accessor. The verb execution there is protected by itself, so basically it's safe to call individually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-04ALSA: hda - Update chmap tlv to report sink's capabilitySubhransu S. Prusty
The existing TLV callback implementation copies all of the cea_channel_speaker_allocation map table to the TLV container irrespective of what is reported by sink. This is of little use to the userspace application. With this patch, it parses the spk_alloc block as queried from the ELD, and copies only the corresponding mapping channel allocation entries from the cea channel speaker allocation table. Thus the user can parse the TLV container to identify sink's capability and set the channel map accordingly. It shouldn't impact the behavior in AMD chipset, as this makes use of already parsed spk alloc block to calculate the channel map. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-04Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/hda/hdac_i915.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-04ALSA: hda - Bind with i915 only when Intel graphics is presentTakashi Iwai
On Skylake and onwards, the HD-audio controller driver needs to bind with i915 for having the control of power well audio domain before actually probing the codec. This leads to the load of i915 driver from the audio driver side. But, there are systems that have no Intel graphics but Nvidia or AMD GPU, although they still use HD-audio bus for the onboard audio codecs. On these, loading the i915 driver is nothing but a useless memory and CPU consumption. A simple way to avoid it is just to look for the Intel graphics PCI entry beforehand, and try to bind with i915 only when such an entry is found. Currently, it assumes the PCI display class. If another class appears, this needs to be extended (although it's very unlikely). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-29ALSA: hda - Fix yet another i915 pointer leftover in error pathTakashi Iwai
The hdac_acomp object in hdac_i915.c is left as assigned even after binding with i915 actually fails, and this leads to the WARN_ON() at the next load of the module. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-29ALSA: hda - Clear the leftover component assignment at snd_hdac_i915_exit()Takashi Iwai
The commit [d745f5e7b8b2: ALSA: hda - Add the pin / port mapping on Intel ILK and VLV] introduced a WARN_ON() to check the pointer for avoiding the double initializations. But hdac_acomp pointer wasn't cleared at snd_hdac_i915_exit(), thus after reloading the HD-audio driver, it may result in the false positive warning. This patch makes sure to clear the leftover pointer at exit. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736 Reported-by: Daniela Doras-prodan <daniela.doras-prodan@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28ALSA: hda - Add the pin / port mapping on Intel ILK and VLVTakashi Iwai
Intel IronLake and ValleyView platforms have different HDMI widget pin and digital port mapping from other newer ones. The recent ones (HSW+) have NID 0x05 to 0x07 for port B to port D, while these chips have NID 0x04 to 0x06. For adapting this mapping, pass the codec object instead of the bus object to snd_hdac_sync_audio_rate() and snd_hdac_acomp_get_eld() so that they can check the codec ID and calculate the mapping properly. The changes in the HDMI codec driver side will follow in the later patch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-16ALSA: hda: use list macro for parsing on cleanupVinod Koul
It is always better to use list_for_each_entry_safe() while doing cleanup. So use this instead of open coding this in list in snd_hdac_stream_free_all() Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-10ALSA: hda - Add a sanity check of pin / port mapping on i915 HDMI/DPTakashi Iwai
There is an implicit rule to map between pin NID and port number on Intel HDMI/DP codec: the mapping is fixed only for NID 0x05, 0x06 and 0x07. For avoiding the possible memory corruption, add a sanity check for the NID value and splat WARN_ON() for invalid accesses. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-08Merge branch 'topic/hda' into for-nextTakashi Iwai
2016-03-08ALSA: hda - Fix unexpected resume through regmap code pathTakashi Iwai
HD-audio driver has a mechanism to trigger the runtime resume automatically at accessing the verbs. This auto-resume, however, causes the mutex deadlock when invoked from the regmap handler since the regmap keeps the mutex while auto-resuming. For avoiding that, there is some tricky check in the HDA regmap handler to return -EAGAIN error to back-off when the codec is powered down. Then the caller of regmap r/w will retry after properly turning on the codec power. This works in most cases, but there seems a slight race between the codec power check and the actual on-demand auto-resume trigger. This resulted in the lockdep splat, eventually leading to a real deadlock. This patch tries to address the race window by getting the runtime PM refcount at the check time using pm_runtime_get_if_in_use(). With this call, we can keep the power on only when the codec has been already turned on, and back off if not. For keeping the code consistency, the code touching the runtime PM is stored in hdac_device.c although it's used only locally in hdac_regmap.c. Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Use snd_hdac namespace prefix for chmap exported APIsSubhransu S. Prusty
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Move chmap support helpers/ops to coreSubhransu S. Prusty
Chmap helpers, ops, controls are moved to core. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Add hdmi chmap verb programming ops to chmap objectSubhransu S. Prusty
Add slot and channel count programming to hdmi_chmap object and move the chmap_ops to core. Use register_chmap_ops API to register for default ops. Override specific chmap ops in the driver. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-26ALSA: hda - Loop interrupt handling until really clearedTakashi Iwai
Currently the interrupt handler of HD-audio driver assumes that no irq update is needed while processing the irq. But in reality, it has been confirmed that the HW irq is issued even during the irq handling. Since we clear the irq status at the beginning, process the interrupt, then exits from the handler, the lately issued interrupt is left untouched without being properly processed. This patch changes the interrupt handler code to loop over the check-and-process. The handler tries repeatedly as long as the IRQ status are turned on, and either stream or CORB/RIRB is handled. For checking the stream handling, snd_hdac_bus_handle_stream_irq() returns a value indicating the stream indices bits. Other than that, the change is only in the irq handler itself. Reported-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20ALSA: hda - Degrade i915 binding failure messageTakashi Iwai
Currently HD-audio driver on Intel Skylake or Broxteon gives an error message when binding with i915 audio component fails. However, this isn't any serious error on a system without Intel graphics. Indeed there are such systems, where a third-party codec (e.g. Creative) is put on the mobo while using other discrete GPU (e.g. Nvidia). Printing a kernel "error" message is overreaction in such a case. This patch downgrades the print level for that message. For systems that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP), another kernel error message is shown in addition to make clear what went wrong. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-11Merge tag 'asoc-v4.4-rc8' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Last updates for v4.5 A bunch more updates for v4.5, mainly driver work: - More topology API enhancements from Mengdong Lin working towards making everything more component based and being able to specify PCM links via topology. - Large sets driver updates from Cirrus, Intel (mainly more Skylake support) and Renesas. - New driver for AMD ACP - Rename PCM1792a driver to be generic pcm179x
2016-01-10ALSA: hdac: add snd_hdac_ext_bus_link_power_up_allVinod Koul
We have an API for powering down all links, we need a similar one for powering up links, so add for power up as well Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-10ALSA: hdac: Increase timeout value for link power checkJayachandran B
HW recommends 180us for worst case values for link power up delay, so change the current delay value from 50 (150us) to 150 (450us) Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 17:40:36 +0000