| Age | Commit message (Collapse) | Author |
|---|
|
Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out
when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq())
causes hard lockup so unlock while waiting using jiffies.
---<-snip->---
<0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
<4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem
<4>[ 1211.603053] irq event stamp: 13366
<4>[ 1211.603053] hardirqs last enabled at (13365):
...
<4>[ 1211.603059] Call Trace:
<4>[ 1211.603059] ? delay_tsc+0x3d/0xc0
<4>[ 1211.603059] __delay+0xa/0x10
<4>[ 1211.603060] __const_udelay+0x31/0x40
<4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core]
<4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel]
<4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core]
<4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec]
<4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel]
<4>[ 1211.603061] pci_pm_suspend+0x71/0x140
<4>[ 1211.603062] dpm_run_callback+0x6f/0x330
<4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0
<4>[ 1211.603062] __device_suspend+0xf9/0x370
<4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60
<4>[ 1211.603063] async_suspend+0x1a/0x90
<4>[ 1211.603063] async_run_entry_fn+0x34/0x160
<4>[ 1211.603063] process_one_work+0x1f4/0x6d0
<4>[ 1211.603063] ? process_one_work+0x16e/0x6d0
<4>[ 1211.603064] worker_thread+0x49/0x4a0
<4>[ 1211.603064] kthread+0x107/0x140
<4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0
<4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40
<4>[ 1211.603065] ret_from_fork+0x2e/0x40
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419
Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set")
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
CC: stable <stable@vger.kernel.org> # 4.7
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.12
A quiet release for the core, but lots of new drivers this time around:
- A new, generalized, API for hooking up jacks which makes it easier to
write generic machine drivers for simple cases.
- Continuing fixes for issues with the x86 CPU drivers.
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
DA7213
|
|
The macros _snd_hdac_chip_read() and *_write() expand to different
types (b,w,l) per their argument. They were thought to be used only
internally for other snd_hdac_chip_*() macros, but in some situations
we need to call these directly, and they are way too ugly.
Instead of saving a few lines, we just write these macros explicitly
with the types, so that they can be used in a saner way.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
LLCH is a 16 bit register. Use readw instead of readl API.
Signed-off-by: B, Jayachandran <jayachandran.b@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HDA capability introduced recently are move to hdac core so that it can
be used by legacy driver as well. Also move the capability pointers up
to hdac_bus object.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If the DMAs are not being quiesced properly, it may lead to
stability issues, so the recommendation is to wait till DMAs are
stopped.
After setting the stop bit of RIRB/CORB DMA, we should wait for
stop bit to be set.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq. But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling. Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.
This patch changes the interrupt handler code to loop over the
check-and-process. The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.
For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits. Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Moved azx_alloc_stream_pages and azx_free_stream_pages
to controller library.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds the controller helper codes to hda-core library.
The I/O access ops are added to the bus ops. The CORB/RIRB, the basic
attributes like irq# and iomap address, some locks and the list of
streams are added to the bus object, together with the stream object
and its helpers.
Currently the codes are just copied from the legacy driver, so you can
find duplicated codes in both directories. Only constants are removed
from the original hda_controller.h. More integration work will follow
in the later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
