summaryrefslogtreecommitdiff
path: root/sound/core/seq
AgeCommit message (Collapse)Author
2014-11-21ALSA: core: Deletion of unnecessary checks before two function callsMarkus Elfring
The functions snd_seq_oss_timer_delete() and vunmap() perform also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-18Subject: ALSA: seq: Remove autoload locks in driver registrationTakashi Iwai
Since we're calling request_module() asynchronously now, we can get rid of the autoload lock in snd_seq_device_register_driver(), as well as in the snd-seq driver registration itself. This enables the automatic loading of dependent sequencer modules, such as snd-seq-virmidi from snd-emu10k1-synth. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-18ALSA: seq: bind seq driver automaticallyTakashi Iwai
Currently the sequencer module binding is performed independently from the card module itself. The reason behind it is to keep the sequencer stuff optional and allow the system running without it (e.g. for using PCM or rawmidi only). This works in most cases, but a remaining problem is that the binding isn't done automatically when a new driver module is probed. Typically this becomes visible when a hotplug driver like usb audio is used. This patch tries to address this and other potential issues. First, the seq-binder (seq_device.c) tries to load a missing driver module at creating a new device object. This is done asynchronously in a workq for avoiding the deadlock (modprobe call in module init path). This action, however, should be enabled only when the sequencer stuff was already initialized, i.e. snd-seq module was already loaded. For that, a new function, snd_seq_autoload_init() is introduced here; this clears the blocking of autoloading, and also tries to load all pending driver modules. Reported-by: Adam Goode <agoode@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-15ALSA: seq: Use atomic ops for autoload refcountTakashi Iwai
... just to robustify for races. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-23ALSA: seq: seq_memory.c: Fix closing brace followed by ifRasmus Villemoes
Add a newline and, while at it, remove a space and redundant braces. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: seq: Continue broadcasting events to ports if one of them failsAdam Goode
Sometimes PORT_EXIT messages are lost when a process is exiting. This happens if you subscribe to the announce port with client A, then subscribe to the announce port with client B, then kill client A. Client B will not see the PORT_EXIT message because client A's port is closing and is earlier in the announce port subscription list. The for each loop will try to send the announcement to client A and fail, then will stop trying to broadcast to other ports. Killing B works fine since the announcement will already have gone to A. The CLIENT_EXIT message does not get lost. How to reproduce problem: *** termA $ aseqdump -p 0:1 0:1 Port subscribed 0:1 -> 128:0 *** termB $ aseqdump -p 0:1 *** termA 0:1 Client start client 129 0:1 Port start 129:0 0:1 Port subscribed 0:1 -> 129:0 *** termB 0:1 Port subscribed 0:1 -> 129:0 *** termA ^C *** termB 0:1 Client exit client 128 <--- expected Port exit as well (before client exit) Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: seq: correctly detect input buffer overflowAdam Goode
snd_seq_event_dup returns -ENOMEM in some buffer-full conditions, but usually returns -EAGAIN. Make -EAGAIN trigger the overflow condition in snd_seq_fifo_event_in so that the fifo is cleared and -ENOSPC is returned to userspace as stated in the alsa-lib docs. Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28ALSA: core: Fix format string mismatch in seq_midi.cMasanari Iida
Fix format string mismatch in snd_seq_midisynth_register_port(). Argument type of p is unsigned int. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq_oss: Use standard printk helpersTakashi Iwai
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq: Use standard printk helpersTakashi Iwai
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: core: Use standard printk helpersTakashi Iwai
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq_oss: Drop debug printsTakashi Iwai
The debug prints in snd-seq-oss module are rather useless. Let's clean up before further modifications. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12ALSA: Drop unused name argument in snd_register_oss_device()Takashi Iwai
The last argument, name, of snd_oss_register_device() is nowhere referred in the function in the current code. Let's drop it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-17ALSA: seq-oss: Initialize MIDI clients asynchronouslyTakashi Iwai
We've got bug reports that the module loading stuck on Debian system with 3.10 kernel. The debugging session revealed that the initial registration of OSS sequencer clients stuck at module loading time, which involves again with request_module() at the init phase. This is triggered only by special --install stuff Debian is using, but it's still not good to have such loops. As a workaround, call the registration part asynchronously. This is a better approach irrespective of the hang fix, in anyway. Reported-and-tested-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-11ALSA: seq: Fix missing error handling in snd_seq_timer_open()Takashi Iwai
snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-04ALSA: seq: seq_oss_event: missing range checksDan Carpenter
The "dev" variable could be out of bounds. Calling snd_seq_oss_synth_is_valid() checks that it is is a valid device which has been opened. We check this inside set_note_event() so this function can't succeed without a valid "dev". But we need to do the check earlier to prevent invalid dereferences and memory corruption. One call tree where "dev" could be out of bounds is: -> snd_seq_oss_oob_user() -> snd_seq_oss_process_event() -> extended_event() -> note_on_event() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19various: Fix spelling of "registered" in comments.Adam Buchbinder
Some comments misspell "registered"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-08-20ALSA: lto, sound: Fix export symbols for !CONFIG_MODULESAndi Kleen
The new LTO EXPORT_SYMBOL references symbols even without CONFIG_MODULES. Since these functions are macros in this case this doesn't work. Add a ifdef to fix the build. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-30Documentation: remove references to /etc/modprobe.confLucas De Marchi
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-11device.h: cleanup users outside of linux/include (C files)Paul Gortmaker
For files that are actively using linux/device.h, make sure that they call it out. This will allow us to clean up some of the implicit uses of linux/device.h within include/* without introducing build regressions. Yes, this was created by "cheating" -- i.e. the headers were cleaned up, and then the fallout was found and fixed, and then the two commits were reordered. This ensures we don't introduce build regressions into the git history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-19ALSA: module_param: make bool parameters really boolRusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31sound: Add export.h for THIS_MODULE/EXPORT_SYMBOL where neededPaul Gortmaker
These aren't modules, but they do make use of these macros, so they will need export.h to get that definition. Previously, they got it via the implicit module.h inclusion. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sound: Add module.h to the previously silent sound usersPaul Gortmaker
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-26ALSA: core: remove unused variables.Luca Tettamanti
Drop a few variables that are never read. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-27sound:core:seq:seq_ports.c Remove one to many n's in a word.Justin P. Mattock
The Patch below removes one to many "n's" in a word.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-14ALSA: core: sparse cleanupsClemens Ladisch
Change the core code where sparse complains. In most cases, this means just adding annotations to confirm that we indeed want to do the dirty things we're doing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24ALSA: support module on-demand loading for seq and timerKay Sievers
If CONFIG_SND_DYNAMIC_MINORS is used, assign /dev/snd/seq and /dev/snd/timer the usual static minors, and export specific module aliases to generate udev module on-demand loading instructions: $ cat /lib/modules/2.6.33.4-smp/modules.devname # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 uinput uinput c10:223 dm_mod mapper/control c10:236 snd_timer snd/timer c116:33 snd_seq snd/seq c116:1 The last two lines instruct udev to create device nodes, even when the modules are not loaded at that time. As soon as userspace accesses any of these nodes, the in-kernel module-loader will load the module, and the device can be used. The header file minor calculation needed to be simplified to make __stringify() (supports only two indirections) in the MODULE_ALIAS macro work. This is part of systemd's effort to get rid of unconditional module load instructions and needless init scripts. Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-08ALSA: seq/oss - Fix double-free at error path of snd_seq_oss_open()Takashi Iwai
The error handling in snd_seq_oss_open() has several bad codes that do dereferecing released pointers and double-free of kmalloc'ed data. The object dp is release in free_devinfo() that is called via private_free callback. The rest shouldn't touch this object any more. The patch changes delete_port() to call kfree() in any case, and gets rid of unnecessary calls of destructors in snd_seq_oss_open(). Fixes CVE-2010-3080. Reported-and-tested-by: Tavis Ormandy <taviso@cmpxchg8b.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-13ALSA: core - Define llseek fopsTakashi Iwai
Set no_llseek to llseek file ops of each sound component (but for hwdep). This avoids the implicit BKL invocation via generic_file_llseek() used as default when fops.llseek is NULL. Also call nonseekable_open() at each open ops to ensure the file flags have no seek bit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-02ALSA: trivial: sound seq ioctl dbg: print hexadecimal value padded with 0sThadeu Lima de Souza Cascardo
Instead of padding with blanks and printing "number=0x a", print "number=0x0a". Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-18sound: seq_timer: simplify snd_seq_timer_set_tick_resolution() parametersClemens Ladisch
As snd_seq_timer_set_tick_resolution() is always called with the same three fields of struct snd_seq_timer, it suffices to give that as the only parameter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-09-10Merge branch 'topic/midi' into for-linusTakashi Iwai
* topic/midi: sound: rawmidi: disable active-sensing-on-close by default sound: seq_oss_midi: remove magic numbers sound: seq_midi: do not send MIDI reset when closing seq-midi: always log message on output overrun
2009-07-19ALSA: OSS sequencer should be initialized after snd_seq_system_client_initJaswinder Singh Rajput
When build SND_SEQUENCER in kernel then OSS sequencer(alsa_seq_oss_init) is initialized before System (snd_seq_system_client_init) which leads to memory leak : unreferenced object 0xf6b0e680 (size 256): comm "swapper", pid 1, jiffies 4294670753 backtrace: [<c108ac5c>] create_object+0x135/0x204 [<c108adfe>] kmemleak_alloc+0x26/0x4c [<c1087de2>] kmem_cache_alloc+0x72/0xff [<c126d2ac>] seq_create_client1+0x22/0x160 [<c126e3b6>] snd_seq_create_kernel_client+0x72/0xef [<c1485a05>] snd_seq_oss_create_client+0x86/0x142 [<c1485920>] alsa_seq_oss_init+0xf6/0x155 [<c1001059>] do_one_initcall+0x4f/0x111 [<c14655be>] kernel_init+0x115/0x166 [<c10032af>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff unreferenced object 0xf688a580 (size 64): comm "swapper", pid 1, jiffies 4294670753 backtrace: [<c108ac5c>] create_object+0x135/0x204 [<c108adfe>] kmemleak_alloc+0x26/0x4c [<c1087de2>] kmem_cache_alloc+0x72/0xff [<c126f964>] snd_seq_pool_new+0x1c/0xb8 [<c126d311>] seq_create_client1+0x87/0x160 [<c126e3b6>] snd_seq_create_kernel_client+0x72/0xef [<c1485a05>] snd_seq_oss_create_client+0x86/0x142 [<c1485920>] alsa_seq_oss_init+0xf6/0x155 [<c1001059>] do_one_initcall+0x4f/0x111 [<c14655be>] kernel_init+0x115/0x166 [<c10032af>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff unreferenced object 0xf6b0e480 (size 256): comm "swapper", pid 1, jiffies 4294670754 backtrace: [<c108ac5c>] create_object+0x135/0x204 [<c108adfe>] kmemleak_alloc+0x26/0x4c [<c1087de2>] kmem_cache_alloc+0x72/0xff [<c12725a0>] snd_seq_create_port+0x51/0x21c [<c126de50>] snd_seq_ioctl_create_port+0x57/0x13c [<c126d07a>] snd_seq_do_ioctl+0x4a/0x69 [<c126d0de>] snd_seq_kernel_client_ctl+0x33/0x49 [<c1485a74>] snd_seq_oss_create_client+0xf5/0x142 [<c1485920>] alsa_seq_oss_init+0xf6/0x155 [<c1001059>] do_one_initcall+0x4f/0x111 [<c14655be>] kernel_init+0x115/0x166 [<c10032af>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff The correct order should be : System (snd_seq_system_client_init) should be initialized before OSS sequencer(alsa_seq_oss_init) which is equivalent to : 1. insmod sound/core/seq/snd-seq-device.ko 2. insmod sound/core/seq/snd-seq.ko 3. insmod sound/core/seq/snd-seq-midi-event.ko 4. insmod sound/core/seq/oss/snd-seq-oss.ko Including sound/core/seq/oss/Makefile after other seq modules fixes the ordering and memory leak. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15sound: rawmidi: disable active-sensing-on-close by defaultClemens Ladisch
Sending an Active Sensing message when closing a port can interfere with the following data if the port is reopened and a note-on is sent before the device's timeout has elapsed. Therefore, it is better to disable this setting by default. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15sound: seq_oss_midi: remove magic numbersClemens Ladisch
Instead of using magic numbers for the controlles sent when resetting a port, use the symbols from asoundef.h. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15sound: seq_midi: do not send MIDI reset when closingClemens Ladisch
Sending a MIDI reset message when closing a port is wrong because we only want to shut the device up, not to reset all settings. Furthermore, many devices ignore this message. Fortunately, the RawMIDI layer already shuts the device up, so we can ignore this matter here. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15seq-midi: always log message on output overrunClemens Ladisch
It turns out that the main cause of output buffer overruns is not slow drivers but applications that generate too many messages. Therefore, it makes more sense to make that error message always visible, and to rate-limit it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22Merge branch 'topic/seq-midi-fix' into for-linusTakashi Iwai
* topic/seq-midi-fix: sound: seq_midi_event: fix decoding of (N)RPN events
2009-06-22sound: seq_midi_event: fix decoding of (N)RPN eventsClemens Ladisch
When decoding (N)RPN sequencer events into raw MIDI commands, the extra_decode_xrpn() function had accidentally swapped the MSB and LSB controller values of both the parameter number and the data value. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29ALSA: clean up the logic for building sequencer modulesMichal Marek
Instead of mangling the CONFIG_* variables in the makefiles over and over, set a few helper variables in Kconfig. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14ALSA: sound/core: use memdup_user()Li Zefan
Remove open-coded memdup_user(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: Add missing KERN_* prefix to printk in sound/coreTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-24ALSA: Add hrtimer backend for ALSA timer interfaceTakashi Iwai
Added the hrtimer backend for ALSA timer interface. It can be used for the sequencer timer source. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-13ALSA: Kill snd_assert() in sound/core/*Takashi Iwai
Kill snd_assert() in sound/core/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-04sound: ensure device number is valid in snd_seq_oss_synth_make_infoWilly Tarreau
snd_seq_oss_synth_make_info() incorrectly reports information to userspace without first checking for the validity of the device number, leading to possible information leak (CVE-2008-3272). Reported-By: Tobias Klein <tk@trapkit.de> Acked-and-tested-by: Takashi Iwai <tiwai@suse.de> Cc: stable@kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-10ALSA: remove CONFIG_KMOD from soundJohannes Berg
A bunch of things in alsa depend on CONFIG_KMOD, use CONFIG_MODULES instead where the dependency is needed at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 01:50:40 +0000