| Age | Commit message (Collapse) | Author |
|---|
|
Both snd_ctl_add() and snd_ctl_replace() process the things in a
fairly similar way, and indeed the most of the codes can be unified.
This patch is a refactoring to consolidate the both functions to call
a single helper with an extra "mode" argument. There should be no
functional difference, except for one additional sanity check applied
now to snd_ctl_replace() (which was rather overlooking, IMO), too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The procedure for adding a user control element has some window opened
for race against the concurrent removal of a user element. This was
caught by syzkaller, hitting a KASAN use-after-free error.
This patch addresses the bug by wrapping the whole procedure to add a
user control element with the card->controls_rwsem, instead of only
around the increment of card->user_ctl_count.
This required a slight code refactoring, too. The function
snd_ctl_add() is split to two parts: a core function to add the
control element and a part calling it. The former is called from the
function for adding a user control element inside the controls_rwsem.
One change to be noted is that snd_ctl_notify() for adding a control
element gets called inside the controls_rwsem as well while it was
called outside the rwsem. But this should be OK, as snd_ctl_notify()
takes another (finer) rwlock instead of rwsem, and the call of
snd_ctl_notify() inside rwsem is already done in another code path.
Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is one place missing __user annotation to the pointer used by
the recent code refactoring. Reported by sparse.
Fixes: 450296f305f1 ("ALSA: control: code refactoring TLV ioctl handler")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove a bunch of trailing whitespace errors. They are
fairly annoying if you have your editor set to strip trailing
whitespace because you find you've introduced more changes
than you were trying to make.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE
operations" introduced a potential for kernel memory corruption due
to an incorrect if statement allowing non-readable controls to fall
through and call the get function. For TLV controls a driver can omit
SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function
can be called. Instead the normal get() can be invoked unexpectedly
and as the driver expects that this will only be called for controls
<= 512 bytes, potentially try to copy >512 bytes into the 512 byte
return array, so corrupting kernel memory.
The problem is an attempt to refactor the snd_ctl_elem_read function
to invert the logic so that it conditionally aborted if the control
is unreadable instead of conditionally executing. But the if statement
wasn't inverted correctly.
The correct inversion of
if (a && !b)
is
if (!a || b)
Fixes: becf9e5d553c2 ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"All kinds of misc stuff, without any unifying topic, from various
people.
Neil's d_anon patch, several bugfixes, introduction of kvmalloc
analogue of kmemdup_user(), extending bitfield.h to deal with
fixed-endians, assorted cleanups all over the place..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
alpha: osf_sys.c: use timespec64 where appropriate
alpha: osf_sys.c: fix put_tv32 regression
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
dcache: delete unused d_hash_mask
dcache: subtract d_hash_shift from 32 in advance
fs/buffer.c: fold init_buffer() into init_page_buffers()
fs: fold __inode_permission() into inode_permission()
fs: add RWF_APPEND
sctp: use vmemdup_user() rather than badly open-coding memdup_user()
snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
replace_user_tlv(): switch to vmemdup_user()
new primitive: vmemdup_user()
memdup_user(): switch to GFP_USER
eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
eventfd: fold eventfd_ctx_read() into eventfd_read()
eventfd: convert to use anon_inode_getfd()
nfs4file: get rid of pointless include of btrfs.h
uvc_v4l2: clean copyin/copyout up
vme_user: don't use __copy_..._user()
usx2y: don't bother with memdup_user() for 16-byte structure
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currently we're taking power_lock at each card component for assuring
the power-up sequence, but it doesn't help anything in the
implementation at the moment: it just serializes unnecessarily the
callers, but it doesn't protect about the power state change itself.
It used to have some usefulness in the early days where we managed the
PM manually. But now the suspend/resume core procedure is beyond our
hands, and power_lock lost its meaning.
This patch drops the power_lock from allover the places.
There shouldn't be any issues by this change, as it's no helper
regarding the power state change. Rather we'll get better performance
by removing the serialization; which is the only slight concern of any
behavior change, but it can't be a showstopper, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
element set
For user-defined element set, in its initial state, TLV data is not
registered. It's firstly available when any application register it by
an additional operation. However, in current implementation, it's available
in its initial state. As a result, applications get -ENXIO to read it.
This commit controls its readability to manage info flags properly. In an
initial state, elements don't have SND_CTL_ELEM_ACCESS_TLV_READ flag. Once
TLV write operation is executed, they get the flag.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In a design of user-defined element set, applications allow to change TLV
data on the set. This operation doesn't only affects to a target element,
but also to elements in the set.
This commit generates TLV event for all of elements in the set when the TLV
data is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In a design of ALSA control core, a set of elements is represented by
'struct snd_kcontrol' to share common attributes. The set of elements
shares TLV (Type-Length-Value) data, too.
On the other hand, in ALSA control interface/protocol for applications,
a TLV operation is committed to an element. Totally, the operation can
have sub-effect to the other elements in the set. For example, TLV_WRITE
operation is expected to change TLV data, which returns to applications.
Applications attempt to change the TLV data per element, but in the above
design, they can effect to elements in the same set.
As a default, ALSA control core has no implementation except for TLV_READ
operation. Thus, the above design looks to have no issue. However, in
kernel APIs of ALSA control component, developers can program a handler
for any request of the TLV operation. Therefore, for elements in a set
which has the handler, applications can commit TLV_WRITE and TLV_COMMAND
requests.
For the above scenario, ALSA control core assist notification. When the
handler returns positive value, the core queueing an event for a requested
element. However, this includes design defects that the event is not
queued for the other element in a set. Actually, developers can program
the handlers to keep per-element TLV data, but it depends on each driver.
As of v4.13-rc6, there's no driver in tree to utilize the notification,
except for user-defined element set. This commit delegates the notification
into each driver to prevent developers from the design defects.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Conflicts:
sound/core/control.c
|
|
When user tries to replace the user-defined control TLV, the kernel
checks the change of its content via memcmp(). The problem is that
the kernel passes the return value from memcmp() as is. memcmp()
gives a non-zero negative value depending on the comparison result,
and this shall be recognized as an error code.
The patch covers that corner-case, return 1 properly for the changed
TLV.
Fixes: 8aa9b586e420 ("[ALSA] Control API - more robust TLV implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In ALSA control interface, applications can execute two types of request
for value of members on each element; ELEM_READ and ELEM_WRITE. In ALSA
control core, these two requests are handled within read lock of a
counting semaphore, therefore several processes can run to execute these
two requests at the same time. This has an issue because ELEM_WRITE
requests have an effect to change state of the target element. Concurrent
access should be controlled for each of ELEM_READ/ELEM_WRITE case.
This commit uses the counting semaphore as write lock for ELEM_WRITE
requests, while use it as read lock for ELEM_READ requests. The state of
a target element is maintained exclusively between ELEM_WRITE/ELEM_READ
operations.
There's a concern. If the counting semaphore is acquired for read lock
in implementations of 'struct snd_kcontrol.put()' in each driver, this
commit shall cause dead lock. As of v4.13-rc5, 'snd-mixer-oss.ko',
'snd-emu10k1.ko' and 'snd-soc-sst-atom-hifi2-platform.ko' includes codes
for read locks, but these are not in a call graph from
'struct snd_kcontrol.put(). Therefore, this commit is safe.
In current implementation, the same solution is applied for the other
operations to element; e.g. ELEM_LOCK and ELEM_UNLOCK. There's another
discussion about an overhead to maintain concurrent access to an element
during operating the other elements on the same card instance, because the
lock primitive is originally implemented to maintain a list of elements on
the card instance. There's a substantial difference between
per-element-list lock and per-element lock.
Here, let me investigate another idea to add per-element lock to maintain
the concurrent accesses with inquiry/change requests to an element. It's
not so frequent for applications to operate members on elements, while
adding a new lock primitive to structure increases memory footprint for
all of element sets somehow. Experimentally, inquiry operation is more
frequent than change operation and usage of counting semaphore for the
inquiry operation brings no blocking to the other inquiry operations. Thus
the overhead is not so critical for usual applications. For the above
reasons, in this commit, the per-element lock is not introduced.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ALSA control core handles ELEM_READ/ELEM_WRITE requests within lock
acquisition of a counting semaphore. The lock is acquired in helper
functions in the end of call path before calling implementations of each
driver.
ioctl(2) with SNDRV_CTL_ELEM_READ
...
->snd_ctl_ioctl()
->snd_ctl_elem_read_user()
->snd_ctl_elem_read()
->down_read(controls_rwsem)
->snd_ctl_find_id()
->struct snd_kcontrol.get()
->up_read(controls_rwsem)
ioctl(2) with SNDRV_CTL_ELEM_WRITE
...
->snd_ctl_ioctl()
->snd_ctl_elem_write_user()
->snd_ctl_elem_write()
->down_read(controls_rwsem)
->snd_ctl_find_id()
->struct snd_kcontrol.put()
->up_read(controls_rwsem)
This commit moves the lock acquisition to middle of the call graph to
simplify the helper functions. As a result:
ioctl(2) with SNDRV_CTL_ELEM_READ
...
->snd_ctl_ioctl()
->snd_ctl_elem_read_user()
->down_read(controls_rwsem)
->snd_ctl_elem_read()
->snd_ctl_find_id()
->struct snd_kcontrol.get()
->up_read(controls_rwsem)
ioctl(2) with SNDRV_CTL_ELEM_WRITE
...
->snd_ctl_ioctl()
->snd_ctl_elem_write_user()
->down_read(controls_rwsem)
->snd_ctl_elem_write()
->snd_ctl_find_id()
->struct snd_kcontrol.put()
->up_read(controls_rwsem)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
operation
Any control event is queued by a call of snd_ctl_notify(). This function
adds the event to each queue of opened file data corresponding to ALSA
control character devices. This function acquired two types of lock; a
counting semaphore for a list of the opened file data and a spinlock for
card data opened by the file. Typically, this function is called after
acquiring a counting semaphore for a list of elements in the card data.
In current implementation of a handler for ELEM_WRITE request, the
function is called after releasing the semaphore for a list of elements
in the card data. This release is not necessarily needed.
This commit removes the release to call the function within the critical
section so that later commits are simple.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
User-defined element set registers own handler to get callbacks from TLV
ioctl handler. In the handler, execution path bifurcates depending on
requests from user space. At write request, container in given buffer is
registered to the element set, or replaced old TLV data. At the read
request, the registered data is copied to user space. The command request
is not allowed. In current implementation, function of the handler
includes codes for the two cases.
This commit adds two helper functions for these cases so that readers can
easily get the above design.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In a design of ALSA control core, execution path bifurcates depending on
target element. When a set with the target element has a handler, it's
called. Else, registered buffer is copied to user space. These two
operations are apparently different. In current implementation, they're
on the same function with a condition statement. This makes it a bit hard
to understand conditions of each case.
This commit splits codes for these two cases.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
At a previous commit, concurrent requests for TLV data are maintained
exclusively between read requests and write/command requests. TLV
callback handlers in each driver has no risk from concurrent access for
reference/change.
In current implementation, 'struct snd_card' has a mutex to control
concurrent accesses to user-defined element sets. This commit obsoletes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
operations
In ALSA control interface, applications can execute three types of request
for Type-Length-Value (TLV) data to a set of elements; read, write and
command. In ALSA control core, all of the requests are handled within read
lock to a counting semaphore, therefore several processes can run to access
to the data at the same time for any purposes. This has an issue because
write and command requests have side effect to change state of a set of
elements for the TLV data. Concurrent access should be controlled for each
of reference/change case.
This commit uses the counting semaphore as read lock for TLV read requests,
while use it as write lock for TLV write/command requests. The state of a
set of elements for the TLV data is maintained exclusively between read
requests and write/command requests, or between write and command requests.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Any control event is queued by a call of snd_ctl_notify(). This function
adds the event to each queue of opened file data corresponding to ALSA
control character devices. This function acquired two types of lock; a
counting semaphore for a list of the opened file data and a spinlock for
card data opened by the file. Typically, this function is called after
acquiring a counting semaphore for a list of elements in the card data.
In current implementation of TLV request handler, the function is called
after releasing the semaphore for a list of elements in the card data.
This release is not necessarily needed.
This commit removes the release to call the function within the critical
section so that later commits are simple.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets
and 2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding"
* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
ALSA: hda - Fix unbalance of i915 module refcount
ASoC: Intel: Skylake: Remove driver debugfs exit
ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
ALSA: hda/realtek - Remove GPIO_MASK
ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
ALSA: pcm: add a documentation for tracepoints
ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
ASoC: Intel: Skylake: Add support to read firmware registers
ASoC: Intel: Skylake: Add sram address to sst_addr structure
ASoC: Intel: Skylake: Debugfs facility to dump module config
ASoC: Intel: Skylake: Add debugfs support
ASoC: fix semicolon.cocci warnings
ASoC: rt5645: Add quirk override by module option
ASoC: rsnd: make arrays path and cmd_case static const
ASoC: audio-graph-card: add widgets and routing for external amplifier support
ASoC: audio-graph-card: update bindings for amplifier support
ASoC: rt5665: calibration should be done before jack detection
ASoC: rsnd: constify dev_pm_ops structures.
ASoC: nau8825: change crosstalk-bypass property to bool type
...
|
|
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In current implementation of ALSA control core, list operation has
a limitation to handle 16384 entries at once. This seems due to
allocation in kernel space to copy data from user space.
With a commit 53e7bf452584 ("ALSA: control: Simplify snd_ctl_elem_list()
implementation"), for the operation, ALSA control core copies data
into user space directly. No need to care of kernel spaces anymore.
This commit purges the limitation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch simplifies the code of snd_ctl_elem_list() in the following
ways:
- Avoid a vmalloc() temporary buffer but do copy in each iteration;
the vmalloc buffer was introduced at the time we took the spinlock
for the ctl element management.
- Use the standard list_for_each_entry() macro
- Merge two loops into one;
it used to be a loop for skipping until offset becomes zero and
another loop to copy the data. They can be folded into a single
loop easily.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
<linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merged 4.8 changes.
|
|
snd_ctl_remove() has a notification for the removal event. It's
superfluous when done during the device got disconnected. Although
the notification itself is mostly harmless, it may potentially be
harmful, and should be suppressed. Actually some components PCM may
free ctl elements during the disconnect or free callbacks, thus it's
no theoretical issue.
This patch adds the check of card->shutdown flag for avoiding
unnecessary notifications after (or during) the disconnect.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The 'dimen' field in struct snd_ctl_elem_info is used to compose all of
members in the element as multi-dimensional matrix. The field has four
members. Each member represents the width in each dimension level by
element member unit. For example, if the members consist of typical
two dimensional matrix, the dimen[0] represents the number of rows
and dimen[1] represents the number of columns (or vise-versa).
The total members in the matrix should be exactly the same as the number
of members in the element, while current implementation has no validator
of this information. In a view of userspace applications, the information
must be valid so that it cannot cause any bugs such as buffer-over-run.
This commit adds a validator of dimension information for userspace
applications which add new element sets. When they add the element sets
with wrong dimension information, they receive -EINVAL.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a TLV ioctl with numid zero is handled, the driver may spew a
kernel warning with a stack trace at each call. The check was
intended obviously only for a kernel driver, but not for a user
interaction. Let's fix it.
This was spotted by syzkaller fuzzer.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
userspace element
An element instance can have several elements with the same feature.
Some userspace applications can add such an element instance by add
operation with the number of elements. Then, the element instance
gets a memory object to keep states of these elements.
But the element instance has just one memory object for the elements.
This causes the same result to each read/write operations to the
different elements.
This commit fixes this bug by allocating enough memory objects to the
element instance for each of elements.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The commit [39d118677baa: ALSA: ctl: evaluate macro instead of
numerical value] replaced the numbers with constants, but one place
was replaced wrongly with a different type. Fixed now.
Fixes: 39d118677baa ('ALSA: ctl: evaluate macro instead of numerical value')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
elements
currently some members related identical information are not fiiled
in returned parameter of SNDRV_CTL_IOCTL_ELEM_ADD. This is not better
for userspace application.
This commit copies information to returned value. When failing to copy
into userspace, the added elements are going to be removed. Then, no
applications can lock these elements between adding and removing because
these are already locked.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
for userspace controls
In operations of SNDRV_CTL_IOCTL_ELEM_INFO, identical information in
returned value is cleared. This is not better to userspace application.
This commit confirms to return full identical information to the
operations.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When event originator doesn't set numerical ID in identical information,
the event data includes no numerical ID, thus userspace applications
cannot identify the control just by unique ID in event data.
This commit fix this bug so as the event data includes all of identical
information.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
SNDRV_CTL_TLV_OP_XXX is defined but not used in core code. Instead,
raw numerical value is evaluated.
This commit replaces these values to these macros for better looking.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In the commit [2225e79b9b03: 'ALSA: core: reduce stack usage related
to snd_ctl_new()'], the id field of the newly added kctl is untouched,
thus all attribute like name string remain empty. The fix is just to
add the forgotten memcpy of the id field.
Fixes: 2225e79b9b03 ('ALSA: core: reduce stack usage related to snd_ctl_new()')
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
There was no check about the id string of user control elements, so we
accepted even a control element with an empty string, which is
obviously bogus. This patch adds more sanity checks of id strings.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The callers of snd_ctl_new() need to have 'struct snd_kcontrol' data,
and pass the data as template. Then, the function allocates the structure
data again and copy from the template. This is a waste of resources.
Especially, the callers use large stack for the template.
This commit removes a need of template for the function, thus, changes
the prototype of snd_ctl_new(). Furthermore, this commit changes
the code of callers, snd_ctl_new1() and snd_ctl_elem_add() for better
shape.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The parameters can be decided in compile time.
This commit adds precomputed table to reduce calculating time.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In 'replace' event data, numerical ID of control is always invalid. This
commit fix this bug so as the event data has renewed numerical ID for
control.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently when adding a new control, the assigned numerical ID is not
set for event data, thus userspace applications cannot realize it just
by event data.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that all callers have been replaced with
snd_device_register_for_dev(), let's drop the obsolete device
registration code and concentrate only on the code handling struct
device directly. That said,
- remove the old snd_device_register(),
- rename snd_device_register_for_dev() with snd_device_register(),
- drop superfluous arguments from snd_device_register(),
- change snd_unregister_device() to pass the device pointer directly
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch embeds a struct device for the control device into the card
object and avoid the device creation at registration time.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of open-coding the search over the control file loop, provide
a helper function for the preferred subdevice assigned to the current
process.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
